Pinning frequently used sqls

Hi all,
Please let me know if the steps involved to pin frequently used sql statement in library cache to avoid reparsing
Thanks for all your help.

Frequently used SQL ought to be retained in the library cache without pinning. Oracle only starts flushing stuff from the cache once it's full and then it ages out the least-recently used queries.
So, if you have a persistent problem with excessive reloading of frequently used queries you may need to reconsider the value of your shared_pool_size.
Cheers, APC

Similar Messages

Pininig frquently used sql statements in SGA

Hi
Can you pls let me know the procedure to pin Oracle sql or pl/sql statements into SGA
Thanks in anticipation.
Hariharan.T

William Robertson wrote:
Perhaps it is used frequently but other code is used even more frequently.Yep, and of course pinning the less frequently used code will cause the more frequently used code to be aged out which will require pinning that code which in turn will age out code that is run even more frequently to be aged out which will require pinning that until everything but the most frequently used code will be pinned and the most frequently used code will be aged out.

Demonstrating PL/SQL Functions Using SQL Developer

Good afternoon,
I'm starting to write some PL/SQL functions to replace some of the SQL that I use most frequently. A couple of very simple examples would be:
create or replace function func_test (p_1 number) return number
is
x number;
y number;
begin
x :=1;
y :=2;
return p_1 * x * y;
end func_test;
create or replace function func_test2 (p_1 varchar2) return varchar2
is
return_val varchar2(10);
begin
select p_1 into return_val from dual;
return return_val;
end func_test2;
However, at my workplace I haven't been granted create function privileges yet until I can demonstrate some examples, which is understandable.
For the time being, without these privileges, is there a way I can build/test functions in principle locally using SQL Developer without the need to write the functions to our database? I.e. can I demonstrate the above in SQL Developer, but without wrapping in create or replace syntax?
I hope this isn't too vague.
Using Oracle 11gR2 (not logged in to workplace database at the moment for specific version no.)
SQL Developer 3.4
Thanks,
TP

sb92075 02-Nov-2013 19:12 (in response to TinyPenguin)
populating test DB with data is a solvable problem.
You don't need client data to test code (functions).
You only need sample test data; which generally is less than a few dozen records per table.
Absolutely, of course. Our client database is pretty messy though, and includes data prior to the implementation of more recent business rules that I need to take account of. Useful perspective though, thanks.
rp0428 02-Nov-2013 19:14 (in response to TinyPenguin)
Sure, but then I wouldn't have access to all the data in our client database to test functions under various circumstances.
Huh? Why not? It's your database so what keeps you from creating a database link to your client database where all the data is?
Also, I suppose it's not good practice to constantly write/replace/drop functions to/from a database when developing them? Better to test the function in principle and then write to the database?
Huh? Why not? What you think a dev database is for if not for development?
Based on your two posts so far in this thread it's understandable why they don't want to give you privileges yet. Those sample 'functions' you posted are NOT a good use for functions.
In sql developer you can just create and save the queries you use most often. There is no need to create functions for that.
But if you do need an anonymous function now and then just create one using sql*plus syntax:
Our IT department are pretty sensitive about how they allow access, even to the dev environment. As you've identified, I'm not naturally a programmer so the option to play around with the data to develop some representative examples about how we can simplify and devolve SQL reporting to more members of staff is useful to me. I just wrote those two function quickly for the purpose of posting some sample data, which I thought would be helpful. Thanks for illustrating how to return their output using an anonymous block.
FrankKulash 02-Nov-2013 19:13 (in response to TinyPenguin)
Hi,
The obvious solution is to get the privileges. If your employer really wants you to do something, they need to give you the necessary privileges to do it. It's silly for them to tell you to do something, but refuse to let you do it.
Failing that, you can install Oracle on your own machine, as suggested above. It's free and legitimate if you're only using it for learning and developing. Oracle Express Edition is very easy to install.
As a last resort, you can write functions and procedures that are local to an anonymous block, like this:
Thanks Frank. Yeah I'm going to speak with our DBA next week about privileges. I've got XE/SQL Developer installed on my own computer - I wrote those sample functions using them - I just wasn't sure how to call/return anonymous blocks as both you and rp identified to develop at work as an interim solution.
Thanks a lot All,
TP.

SP 2013 - Database Recovery Mode When Using SQL Server Mirroring

Hello Community,
Our DBA is configuring a High Availability Architecture for our SharePoint 2013 Farm. Essentially he is using SQL Server Database mirroring with a clustered automatic failover using a witness server. He has informed me that mirroring requires
that the databases are set to Full Recovery Mode, but that several of the databases are set to Simple Recovery Mode, the databases are the following:
SearchService_DB
SearchService_DB_CrawlStore
SearchService_DB_AnalyticsReportingStore
SearchService_DB_LinksStore
WSS_UsageApplication
User_Profile_DB
User_Sync_DB
User_Social_DB
However, when I checked the following article -
http://technet.microsoft.com/en-us/library/cc678868.aspx - I see that Simple Recovery Mode is the default configuration for these databases. So, finally, here is my question - will it be detrimental to these databases to set them to the Full Recovery
Mode?
Thanks!
Tom
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint Gypsy

This really depends on your recovery objectives. The main reason for taking log backups, aside from truncating the log, is to be able to recover to a specific point-in-time. This is very helpful in mission-critical, highly transactional systems. I have not
seen a SharePoint environment require a point-in-time restore of the content or application service database. So for this case, you can overwrite the LDF bakups. Just make sure that you can recover your databases appropriately and meet your recovery objectives
on the farm level.
As far as the log file growth is concerned, you are correct. If you cap the size of your LDF file to let's say 10 GB, regular log backups will truncate the log, thereby, having space for additional transaction log records. The only risk here is when your
log backups are not frequent enough that the LDF file fills up before the next log backup runs to truncate the log. You run the risk of your database behaving as read-only and that will affect the site collections/applications using those databases
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Connection ... able to connect using sql developer, but not sqlplus or toad too

Hi folks, having this issue, with only one of my so many databases, what might be the reason and how to fix/correct this, please assist.
Able to connect using sql developer, but not sqlplus or toad too; sqlplus error: ORA-12154: TNS:could not resolve the connect identifier specified
thanks in advance.

SQLDEVELOPER works since it use JDBC Thin & does not use tnsnames.ora
ORA-12154 ALWAYS only occurs on SQL Client & no SQL*Net packets ever leave client system
ORA-12154 [B]NEVER[/B] involves the listener, the database itself or anything on the DB Server.
ORA-12154 occurs when client requests a connection to some DB server system using some connection string.
TNS-03505 is thrown by tnsping & is same error as ORA-12154 thrown by sqlplus or others.
The lookup operation fails because the name provided can [B]NOT[/B] be resolved to any remote DB.
The analogous operation would be when you wanted to call somebody, but could not find their name in any phonebook.
The most frequent cause for the ORA-12154 error is when the connection alias can not be found in tnsnames.ora.
The lookup operation of the alias can be impacted by the contents of the sqlnet.ora file; specifically DOMAIN entry.
TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS:could not resolve service name [ID 114085.1]
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/

Can we use SQL developer tool to READ/WRITE BerkeleyDB by any means

We use Berkeley Db as a persistent database, which holds data less frequently changed data. Can is it possible to use SQL Developer tool or any other front end tool that can connect and communicate to Berkeley db file for INSERT, UPDATE, DELETE records.

I assume you're referring to Berkeley DB SQL (BDB SQL API).
SQL Developer is not certified to work with BDB SQL; see the SQL Developer Certifications page.
Something similar was asked some time ago, about connecting JDeveloper to BDB SQL; see this Re: How connect Oracle JDeveloper 11g to Berkeley DB 11g. The SQL tools in JDeveloper and SQL Developer are similar and built on the same components, so my answer there can be extended to SQL Developer as well. While you can probably have SQL Developer properly connect to a BDB SQL database, I am afraid you won't be able to do more than just viewing the data; likely any attempt to generate DDL or DML statements, export data, or run DML statements against the database will fail.
If you migrated to BDB SQL from SQLite and were using a front-end tool for SQLite, it should be possible to use that with BDB SQL as well.
Regards,
Andrei

How to load a default value in to a column when using sql loader

Im trying to load from a flat file using sql loader.
for 1 column i need to update using a default value
how to go about this?

Hi!
try this code --
LOAD DATA
   INFILE 'sample.dat'
   REPLACE
   INTO TABLE emp
   empno   POSITION(01:04) INTEGER EXTERNAL NULLIF empno=BLANKS,
   ename   POSITION(06:15) CHAR,
   job         POSITION(17:25) CHAR,
   mgr       POSITION(27:30) INTEGER EXTERNAL NULLIF mgr=BLANKS,
   sal        POSITION(32:39) DECIMAL EXTERNAL NULLIF sal=BLANKS,
   comm   POSITION(41:48) DECIMAL EXTERNAL DEFAULTIF comm = 100,
   deptno POSITION(50:51) INTEGER EXTERNAL NULLIF deptno=BLANKS,
   hiredate POSITION(52:62) CONSTANT SYSDATE
)-hope this will solve ur purpose.
Regards.
Satyaki De.

Load XML File into temporary tables using sql loader

Hi All,
I have an XML file as below. I need to insert the contents into a temporary staging table using sql loader. Please advice how I need to do that.
For example Portfolios should go into a seperate table, and all the tags inside it should be populated in the columns of the table.
Family should go into a seperate table and all the tags inside it should be populated in the columns of the table.
Similarly offer, Products etc.
- <ABSProductCatalog xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <ProductSalesHierachy>
- <Portfolios>
- <Portfolio productCode="P1">
<Attribute name="CatalogProductName" value="Access" />
<Attribute name="Status" value="Active" />
</Portfolio>
- <Portfolio productCode="P2">
<Attribute name="CatalogProductName" value="Data" />
<Attribute name="Status" value="Active" />
</Portfolio>
- <Portfolio productCode="P3">
<Attribute name="CatalogProductName" value="Voice" />
<Attribute name="Status" value="Active" />
</Portfolio>
- <Portfolio productCode="P4">
<Attribute name="CatalogProductName" value="Wireless" />
<Attribute name="Status" value="Active" />
</Portfolio>
</Portfolios>
- <Families>
- <Family productCode="F1">
<Attribute name="CatalogProductName" value="Internet Access Services" />
<Attribute name="Status" value="Active" />
- <ParentHierarchy>
<Item productCode="P1" modelType="Portfolio" />
</ParentHierarchy>
</Family>
- <Family productCode="F2">
<Attribute name="CatalogProductName" value="Local Access Services" />
<Attribute name="Status" value="Active" />
- <ParentHierarchy>
<Item productCode="P2" modelType="Portfolio" />
</ParentHierarchy>
</Family>
</Families>
- <SubFamilies>
- <SubFamily productCode="SF1">
<Attribute name="CatalogProductName" value="Business Internet service" />
<Attribute name="Status" value="Active" />
- <ParentHierarchy>
<Item productCode="F1" modelType="Family" />
</ParentHierarchy>
</SubFamily>
</SubFamilies>
- <ProductRefs>
- <ProductRef productCode="WSP1" modelType="Wireline Sales Product">
<ActiveFlag>Y</ActiveFlag>
- <ProductHierarchy>
<SalesHierarchy family="F1" subFamily="SF1" portfolio="P1" primary="Y" />
<SalesHierarchy family="F2" portfolio="P2" primary="N" />
<FinancialHierarchy quotaBucket="Voice" strategicProdCategory="Local Voice" />
</ProductHierarchy>
</ProductRef>
- <ProductRef productCode="MSP2" modelType="Handset">
<ActiveFlag>Y</ActiveFlag>
- <ProductHierarchy>
<SalesHierarchy portfolio="P4" primary="Y" />
</ProductHierarchy>
</ProductRef>
</ProductRefs>
</ProductSalesHierachy>
- <Offers>
- <Offer productCode="ABN">
<OfferName>ABN</OfferName>
<OfferDescription>ABN Description</OfferDescription>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
</Segments>
<OfferUpdateDate>2009-11-20</OfferUpdateDate>
<ActiveFlag>Y</ActiveFlag>
</Offer>
- <Offer productCode="OneNet">
<OfferName>OneNet</OfferName>
<OfferDescription>OneNet Description</OfferDescription>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
<Segment>PCG2</Segment>
</Segments>
<OfferUpdateDate>2009-11-20</OfferUpdateDate>
<ActiveFlag>Y</ActiveFlag>
</Offer>
</Offers>
- <Products>
- <Product productCode="WSP1" modelType="Wireline Sales Product">
<ProductName>AT&T High Speed Internet</ProductName>
<ProductDescription>High Speed Internet</ProductDescription>
<LegacyCoProdIndicator>SBC</LegacyCoProdIndicator>
<RevenueCBLCode>1234B</RevenueCBLCode>
<VolumeCBLCode>4567A</VolumeCBLCode>
<SAARTServiceIDCode>S1234</SAARTServiceIDCode>
<MarginPercentRequired>Y</MarginPercentRequired>
<PercentIntl>%234</PercentIntl>
<UOM>Each</UOM>
<PriceType>OneTime</PriceType>
<ProductStatus>Active</ProductStatus>
<Compensable>Y</Compensable>
<Jurisdiction>Everywhere</Jurisdiction>
<ActiveFlag>Y</ActiveFlag>
- <Availabilities>
<Availability>SE</Availability>
<Availability>E</Availability>
</Availabilities>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
</Segments>
<VDIndicator>Voice</VDIndicator>
<PSOCCode>PSOC 1</PSOCCode>
<USBilled>Y</USBilled>
<MOWBilled>N</MOWBilled>
<ProductStartDate>2009-11-20</ProductStartDate>
<ProductUpdateDate>2009-11-20</ProductUpdateDate>
<ProductEndDate>2010-11-20</ProductEndDate>
- <AliasNames>
<AliasName>AT&T HSI</AliasName>
<AliasName>AT&T Fast Internet</AliasName>
</AliasNames>
- <OfferTypes>
<OfferType productCode="ABN" endDate="2009-11-20" />
<OfferType productCode="OneNet" />
</OfferTypes>
- <DynamicAttributes>
- <DynamicAttribute dataType="String" defaultValue="2.5 Mbps" name="Speed">
<AttrValue>1.5 Mbps</AttrValue>
<AttrValue>2.5 Mbps</AttrValue>
<AttrValue>3.5 Mbps</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="TransportType">
<AttrValue>T1</AttrValue>
</DynamicAttribute>
</DynamicAttributes>
</Product>
- <Product productCode="MSP2" modelType="Handset">
<ProductName>Blackberry Bold</ProductName>
<ProductDescription>Blackberry Bold Phone</ProductDescription>
<LegacyCoProdIndicator />
<RevenueCBLCode />
<VolumeCBLCode />
<SAARTServiceIDCode />
<MarginPercentRequired />
<PercentIntl />
<UOM>Each</UOM>
<PriceType />
<ProductStatus>Active</ProductStatus>
<Compensable />
<Jurisdiction />
<ActiveFlag>Y</ActiveFlag>
- <Availabilities>
<Availability />
</Availabilities>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
</Segments>
<VDIndicator>Voice</VDIndicator>
<PSOCCode />
<USBilled />
<MOWBilled />
<ProductStartDate>2009-11-20</ProductStartDate>
<ProductUpdateDate>2009-11-20</ProductUpdateDate>
- <AliasNames>
<AliasName />
</AliasNames>
- <OfferTypes>
<OfferType productCode="ABN" />
</OfferTypes>
- <DynamicAttributes>
- <DynamicAttribute dataType="String" name="StlmntContractType">
<AttrValue />
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="BMG 2 year price">
<AttrValue>20</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="MSRP">
<AttrValue>40</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="BMGAvailableType">
<AttrValue />
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="ProductId">
<AttrValue>123456</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="modelSource">
<AttrValue>product</AttrValue>
</DynamicAttribute>
</DynamicAttributes>
</Product>
</Products>
<CatalogChanged>Y</CatalogChanged>
</ABSProductCatalog>

Two options that come to mind. Others exist.
#1 - {thread:id=474031}, which is basically storing the XML in an Object Relational structure for parsing
#2 - Dump the XML into either an XMLType based table or column and use SQL (with XMLTable) to create a view that parses the data. This would be the same as the view shown in the above post.
Don't use sql*loader to parse the XML. I was trying to find a post from mdrake about that but couldn't. In short, sql*loader was not build as an XML parser so don't try to use it that way.

Connecting to Oracle DB on Ubuntu 8.04 using SQL Developer

Hi,
I managed to install Oracle 11g on Ubuntu 8.04 using this guide:
http://www.pythian.com/blogs/968/installing-oracle-11g-on-ubuntu-804-lts-hardy-heron
But I don't remember the Username or SID, that's why I keep on getting ORA-12505 from SQL DEVELOPER
How can I get those missing informations?

But I don't remember the Username or SIDAssuming your DB is up and running, you can find out the SID by :
$ ps -ef | grep smon | grep -v grep
oracle 15298 1 1 10:59 ? 00:00:00 ora_smon_db11
$ here db11 is the SID.
About username, you can create one. Use Sql*Plus and OS authentication :
$ export ORACLE_SID=<your SID>
$ sqlplus / as sysdba
SQL> CREATE USER

Retreving Hexadecimal Values from a table using SQL query.

Hi,
I'm looking for a query to retreive Hexadecimal values contained in a column using SQL query.
The column contains the values of all types, alphanumeric, numeric and hexadecimal.
I need to retreive only hexadecimal values.
any help to me in this regard will be appreciated.
Thanks

Presumably, you can be sure that any valid hex value is indeed MEANT to BE a hex value. For example the value 'ACE' is meant to be a hexadecimal value and not the word.

How to get tax break up of TDS using SQL query ?

Hi all,
We are developing a TDS report using SQL query
Report will contain VendorCode,Date(ap inv date),Vendor name,
Bill value,TDS Amount,
Bill Value 100.000,
TDS (2%) - 2.000,
TDS Surcharge(10% on TDS) - 0.2,
TDS Cess(2%(TDS+TDS Surcharge)) - 0.044,
TDS HeCess(1%(TDS+TDS Surcharge)) - 0.022.
We have developed this report which displays upto
VendorCode,Date(ap inv date),Vendor name,
Bill value,TDS Amount.
How to show tax break up of TDS in SQL query ?
Thanks,
With regards,
Jeyakanthan.

Hi gauraw,
Thank for your reply.
I modified the query , pasted the query
as below in query generator,
Select T0.DocNum,T0.DocDate,T0.CardCode as 'Ledger',T1.TaxbleAmnt As 'Bill value',T1.WTAmnt as 'TDSAmt',(TDSAmt * 0.1) as 'TDS_Surch',
(((TDSAmt0.1) + TDSAmt)0.02) as 'TDSCess',
(((TDSAmt0.1) + TDSAmt)0.01) as 'TDSHCess'
FROM OPCH T0 INNER JOIN PCH5 T1 ON T0.DocEntry = T1.AbsEntry
WHERE (T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]')
on clicking execute its showing error message invalid column
name 'TDSAmt'.
With regards,
Jeyakanthan

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
Regards

All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok

SAP Crystal Report using SQL Server Authentication and Windows Authenticati

I'm a SAP Crystal Report, version for Visual Studio 2010 Beginner
my ingredients are
1.windows 7 ultimate service pack1
2.sql server 2008 standard edition
3.visual studio 2010 pro
4.SAP Crystal Report, version for visual studio.net
I was created a report named customersByCity.rpt using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> I'm supply Server, User ID, Password and Database. I assume me using SQL Server Authentication for my report
Then, my ASP.NET files as following
//ASP.NET
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="viewCustomersByCity.aspx.cs" Inherits="viewCustomersByCity" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
    <title></title>
</head>
<body>
    <form id="form1" runat="server">
    <div><asp:Label ID="lblMsg" runat="server" BackColor="Yellow" ForeColor="Black"></asp:Label>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="true"></CR:CrystalReportViewer>
    </div>
    </form>
</body>
</html>
//code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Collections;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
public partial class viewCustomersByCity : System.Web.UI.Page
    private const string PARAMETER_FIELD_NAME = "city";
    private ReportDocument customersByCityReport;
    private void ConfigureCrystalReports()
        ConnectionInfo connectionInfo = new ConnectionInfo();
        connectionInfo.ServerName = @"WKM1925-PCWKM1925";
        connectionInfo.DatabaseName = "Northwind";
        connectionInfo.UserID = "sa";
        connectionInfo.Password = "sysadmin25";
        SetDBLogonForReport(connectionInfo);
    private void SetDBLogonForReport(ConnectionInfo connectionInfo)
        TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
        foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
            tableLogOnInfo.ConnectionInfo = connectionInfo;
    private void SetCurrentValuesForParameterField(ReportDocument reportDocument, ArrayList arrayList)
        ParameterValues currentParameterValues = new ParameterValues();
        foreach (object submittedValue in arrayList)
            ParameterDiscreteValue parameterDiscreteValue = new ParameterDiscreteValue();
            parameterDiscreteValue.Value = submittedValue.ToString();
            currentParameterValues.Add(parameterDiscreteValue);
        ParameterFieldDefinitions parameterFieldDefinitions = reportDocument.DataDefinition.ParameterFields;
        ParameterFieldDefinition parameterFieldDefinition = parameterFieldDefinitions[PARAMETER_FIELD_NAME];
        parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
    protected void Page_Load(object sender, EventArgs e)
        customersByCityReport = new ReportDocument();
        string reportPath = Server.MapPath("customersByCity.rpt");
        customersByCityReport.Load(reportPath);
        ConfigureCrystalReports();
        ArrayList arrayList = new ArrayList();
        arrayList.Add("paris");
        arrayList.Add("Madrid");
        arrayList.Add("Marseille");
        arrayList.Add("Buenos Aires");
        arrayList.Add("Sao Paulo");
        ParameterFields parameterFields = CrystalReportViewer1.ParameterFieldInfo;
        SetCurrentValuesForParameterField(customersByCityReport, arrayList);
        CrystalReportViewer1.ReportSource = customersByCityReport;
1st scenario
When in a runtime, it's keep appear a dialog box. This dialog box ask me to suppy Server, User ID, Password and Database. Once all information is supplied, my report display the data as expected
2nd scenario
I change my report using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> checked on Integrated Security. I just choose Server, and Database. I assume me using Windows Authentication
When in a runtime, there's no dialog box as above. My report display the data as expected. really cool
Look's like, when report using SQL Server Authentication there's some problem. but, when report using Windows Authentication, it's fine.
I'm looking for comment. Please help me

Hello,
MS SQL Server 2008 requires you to install the MS Client Tools for 2008.
Once install then update all of your reports to use the SQL Native 10 as the OLE DB driver.
The try again, if it still fails search, lots of sample log on code in this forum.
Don

Create statspack report using sql*developer

Hello,
While connecting with PERFSTAT user I can not create statspack report using SQL*Developer:
@?/rdbms/admin/awrrpt
Error starting at line 1 in command:
@?/rdbms/admin/awrrpt
Error report:
Unable to open file: "?/rdbms/admin/awrrpt.sql"
Actually, my problem or question is that how can PERFSTAT user can generate statspack reports from a Client side. What is the other way a non-dba can see the snapshots histroy and generate report (by using perfstat user ) while joing tables or using views?
Thanks a lot.
Best Regards

Hi,
for awr reports @?/rdbms/admin/awrrpt (you need EE+Diagnostic Pack) there is a solution.
Grant execute dbms_workload_repository to <user>;
Grant select_catalog_role to <user>;
get all SNAP_IDs
SELECT   TO_CHAR(s.startup_time,'YYYY.MM.DD HH24:MI:SS') INSTART_FMT,
         di.instance_name INST_NAME,
         di.db_name DB_NAME,
         s.snap_id SNAP_ID,
         TO_CHAR(s.end_interval_time,'YYYY.MM.DD HH24:MI:SS') SNAPDAT,
         s.snap_level LVL
FROM    dba_hist_snapshot s,
         dba_hist_database_instance di
WHERE   di.dbid = s.dbid
         AND di.instance_number = s.instance_number
         AND Di.Startup_Time = S.Startup_Time
ORDER BY snap_id desc;
Select * From Table(Sys.Dbms_Workload_Repository.Awr_Report_Html(DBID, 1, BEGIN_SNAP_ID, END_SNAP_ID));
For statspack i don't know a solutuion. I think the best idea is, create a job to make the statspack report on the server side and access it via external tables or mail them forward to you.
Best regards
Thomas

Pinning frequently used sqls

Similar Messages

Maybe you are looking for