Pinterest: "Oops! Unable to fetch image" error

Hi! I've been trying to pin from monthbymonth.scholastic.com but keep getting the pin error above.
Any ideas on why would be appreciated. It is hosted in Amazon. All images are picture frames, too. Created with Muse.
Can't post from the Addthis or from Pinterest directly.
Any ideas???
Thanks!

Hi,
Please take a look to addthis forum,
AddThis | pinterest Sorry we could not fetch the i...

Similar Messages

Crystal Reports XI - Unable to fetch data error

Hi all,
I get the below error when i click next or previous buton in my report after navigating the report for about 5 to ten minutes.
JRCAgent3 detected an exception: Unable to fetch data for the subreport 'Subreport1' at this position.
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.eA(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.E(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.ca.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.a9.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.m.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.l(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.aB(Unknown Source)
at com.businessobjects.reports.sdk.b.b.byte(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(Unknown Source)
at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
at com.crystaldecisions.report.web.event.b2.a(Unknown Source)
at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
at com.crystaldecisions.report.web.event.av.a(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
at com.dnb.asip.report.viewer.ReportViewerTag.doEndTag(ReportViewerTag.java:94)
at org.apache.jsp.Reports.JSP.VIPReport_jsp._jspService(VIPReport_jsp.java:247)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
at org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProcessor.java:263)
at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(TilesRequestProcessor.java:318)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:175)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:74)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:534)
any help woul be greatly appreciated.
some times i get the below error
"com.crystaldecisions.reports.queryengine.bo: The position is already past the end of the rowset." I am getting very wired errors but not in the same page everytime. what could be the issue?
Thanks,
Prem

hi,
These are the other exception which i get while clicking the buttons in my report after navigating for sometime.
I get DatabaseVerify error for all the subreports in my report since i have checked verify on first refresh option. can i remove that option? I am using a JDBC/JNDI connection.So the database will change in the runtime depending upon development ,CERT or production environment
here are few other wierd errors that occurs to me. All these error doesnt occur consistently,They all occur after accessin the report for some period of time(10 mins)
1. Exception:java.lang.outofMemory
2. A message is shown as Error 1 in the UI but the log shows 'the Unable to fecth data for subreport exception', agian the Message in the UI is not conistent sometime it is 1 and sometimes it is 0
3. when i click on the prevoius,last,nextor first after acessing the report for a lon time i get this exception
RCAgent2 detected an exception: Error fetching total page count: Unable to fetch data for the subreport 'Subreport74' at this position.
at com.businessobjects.reports.sdk.b.b.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
4.When i click on the search button some times i get the below exception
Exception:
com.crystaldecisions.reports.formatter.formatter.c: Invalid data position
at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.ca.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.a9.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.m.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.l(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.aB(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.b.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.b.do(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.b.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.b.a(Unknown Source)
at com.businessobjects.reports.sdk.b.b.try(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.findText(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.findText(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.findText(Unknown Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.findText(Unknown Source)
at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
at com.crystaldecisions.report.web.event.u.a(Unknown Source)
at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
at com.crystaldecisions.report.web.event.av.a(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
at com.dnb.asip.report.viewer.ReportViewerTag.doEndTag(ReportViewerTag.java:92)
at org.apache.jsp.Reports.JSP.VIPReport_jsp._jspService(VIPReport_jsp.java:251)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:175)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:74)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.crystaldecisions.reports.dataengine.ag: Invalid data position
at com.crystaldecisions.reports.dataengine.bk.V(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.n(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.n(Unknown Source)
... 71 more
4.Too many open files Error message is shown in the UI wheni try to load my report.
5. I get the below exception when accessin the report for a long time.
Exception:
JRCAgent2 detected an exception: java.lang.NullPointerException
at com.crystaldecisions.reports.dataengine.bk.new(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.do(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.int(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.G(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.eA(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.E(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.l(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.aB(Unknown Source)
at com.businessobjects.reports.sdk.b.b.byte(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(Unknown Source)
at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
at com.crystaldecisions.report.web.event.b2.a(Unknown Source)
at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
at com.crystaldecisions.report.web.event.av.a(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
at com.dnb.asip.report.viewer.ReportViewerTag.doEndTag(ReportViewerTag.java:94)
at org.apache.jsp.Reports.JSP.VIPReport_jsp._jspService(VIPReport_jsp.java:237)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:175)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:74)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:534)
Am i missing out something very basic:-s Do i need to put any entry in my CRConfig.xml?
I am using JDTS JDBC Driver to connect to my Database and JBoss4.04 A is my application server
Sincerely,
Prem

CS4 unable to place image ERROR: The file is not readable

Hi All,
I have been experiencing big issues with Illustrator CS4 and placing images into a document.
Basically I will be working on say a packaging project and after about the 4th image being placed I will get the error message The file is not readable I select OK (the only option available)
RESULT: no file placed no where to go?
I then have to save the document, close Illustrator, re-open, open the document and then the image will usually place (not always first time though and sometimes I will have to reboot the whole system!) but then the 5th, 6th, 7th image after that I have to follow the same procedure!... The image files are fine, 300ppi, 20-30MB max, PSD, TIFF, JPG dose not matter all follow the same issue... but eventually after a lot of rebooting and loading the so called un-readable files will go into the document.
Also the image will place sometimes but the same error message will appear on attempting to embed the image!
All very annoying and massively time consuming!!!
To top it off since the above, random AI files when loading up will crash Illustrator out... again after a reboot the same file will open fine with no problems???
My system:
OS: Windows 7 Ultimate (64bit)
Processor: Intel Core i7 CPU 920 @ 2.67GHz (quad core)
RAM: 6GB
GRAPHICS: NVIDIA Quadro FX 570 (3GB) (Dual monitor)
DVD/CDR
PRIMARY: ATA 500MB
SECONDARY: ATA 1Tb
Im desperate to get this sorted... other wise its back to my old system... slow but reliable!!
Many Thanks!!

Well, I just encountered the same issue using Illustrator CS5...getting the "The File Is Not Readable" error message...first time that's happened in the 14 years of using the program. It seems the file size was too large for Illustrator (or one of my computers) to handle. So I opened the file using one of my other computers and deleted the unused layers to reduce the file size. Originally, there were 6 layers with 3 different versions of the artwork and what I ended up having to do is create 3 separate files rather than having it all in 1.
Hope this helps!

Unable to fetch site Error # 407

Hi,
When im trying to click Browse/Capture button in URL iView editor,..im facing this error.
I have set the Proxy settings in the httpservice application and restarted the service.
Any help is appreciated.
Regards,
Ricky

Hi Ricky,
I got the same problem, did you solve the problem?
If yes you could provide me a possible solution?...
Thanks a lot..

Error Unable to fetch authentication_scheme (XE specific?)

Was a bit disappointed to discover in ApEx on XE I can not define multiple oracle accounts and just swap these in the Edit Application Attributes/Parsing schema recently like I can on the non XE database, but never mind, I just create a new database account, build the database objects and then import an app export from the old schema - right?
Wrong: I get the Error Unable to fetch authentication_scheme error and the parsing schema is correct. This is on an XP machine with version 2 of ApEx.
I used the export and it went into the Oracle hosted site without any issues.
Phil

Scott
Hope this helps. Much thanks in advance,
Phil
--=--=--
SQL*Plus: Release 10.2.0.1.0 - Beta on Wed May 17 21:24:54 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
SQL> set numformat 999999999999999999999999999
SQL> ---------- # 1 App ID 103
SQL> select security_group_id,owner, authentication,
2 custom_authentication_process from flows_020100.wwv_flows
3 where id=103
4 /
SECURITY_GROUP_ID OWNER
AUTHENTICATION
CUSTOM_AUTHENTICATION_PROCESS
698507975747714 HR
CUSTOM2
.1580108075227870.
SQL>
SQL> select id,name,security_group_id from
2 flows_020100.wwv_flow_custom_auth_setups where flow_id=103
3 /
ID
NAME
SECURITY_GROUP_ID
1580108075227870
HTML DB
698507975747714
1580219849227870
DATABASE
698507975747714
ID
NAME
SECURITY_GROUP_ID
SQL>
SQL> select short_name,provisioning_company_id from flows_020100.wwv_flow_companies;
SHORT_NAME
PROVISIONING_COMPANY_ID
Unknown
0
INTERNAL
10
SYSTEM
696210144731575
SHORT_NAME
PROVISIONING_COMPANY_ID
HR
698507975747714
DEMO
708308154793215
M2
1640709924346523
SHORT_NAME
PROVISIONING_COMPANY_ID
SAFEX
1655628274476335
7 rows selected.
SQL>
SQL>
SQL> ---------- # 2 App ID 106
SQL>
SQL> select security_group_id,owner, authentication, custom_authentication_process
2 from flows_020100.wwv_flows where id=106
3 /
SECURITY_GROUP_ID OWNER
AUTHENTICATION
CUSTOM_AUTHENTICATION_PROCESS
1655628274476335 SAFEX
CUSTOM2
.3266419425866274.
SQL>
SQL>
SQL> select id,name,security_group_id from flows_020100.wwv_flow_custom_auth_setups
2 where flow_id=106
3 /
no rows selected
SQL>
SQL>
SQL> select short_name,provisioning_company_id from flows_020100.wwv_flow_companies;
SHORT_NAME
PROVISIONING_COMPANY_ID
Unknown
0
INTERNAL
10
SYSTEM
696210144731575
SHORT_NAME
PROVISIONING_COMPANY_ID
HR
698507975747714
DEMO
708308154793215
M2
1640709924346523
SHORT_NAME
PROVISIONING_COMPANY_ID
SAFEX
1655628274476335
7 rows selected.
SQL>

Unable to fetch row opening form on table

Hi all,
i have a page with 2 regions, a form on table for DML and a report region that lists the same table.
I am trying to create records in the form and then recall them by report row link for changes.
I cant test if all that stuff can work because i when i run the page after first time an Unable to fetch row error is raised.
After that i have to logout and login and run the page again.
I do my best to explain the problem but feel free to ask for more.
Any kind of help or suggestions are welcome.
Thanks, Alex

Hi,
yes this is the problem.
When i run the page the first time it seem to work fine but after editing, just edit page and run again , the error is raised and the only way out is to logout apex.
My expectation was that if i run the page setting the rowid item , that is the pk of the tabular form, the region appear with setting for insert.
Greets.

Error while importing EJB model in Web dynpro: Unable to fetch the EJBs.

Hi,
We are getting the below error while importing ejb model to Web dynpro.
Error :
Unable to fetch the EJBs. Check if the selected Enterprise Application contain the EJBs.
I have created the public part-> It has a reference to EJB client and the enterprise application also has reference to the EJB project.The EJB is also added in dependency list.
But still we are getting this error. Could anyone please explain what can i do to solve this issue.
Best Regards,
Karthika

Hi Vishweshwara,
Thanks for your reply.
Please find the steps i followed while importing EJB model in webdynpro.
1. The Entity forwarding permission has been enabled.
2. public part reference has been created and through the reference entity option the ejbDC->Client public part is selected.
I followed all the steps mentioned in the document. But still i am getting that error. In EJB DC we have list of JPA entities and stateless session beans are exposed as a webservice(top-down manner).The enterprise application has a reference to the EJB DC.
I could be able to invoke the ejb service beans from ejb explorer and Webservice navigator.
I am able to insert,delete and modify the records from there.
Please let me know what could i do to resolve this error?
Best Regards,
Karthika
Edited by: SAKarthika on Apr 29, 2011 1:43 PM

ORA-01403: no data found . Error Unable to fetch row

Hi
I have a form that, when inserting a new record, should submit the form but remain in the same page with the same info. I have set up the "after processing" branch (unconditional) to redirect to that specific page (page 5), the "reset pagination for this page" option selected and "clear cache" option empty. What happens is that, when inserting a new record, i get error ORA-01403 indicating that it's unable to fetch the record. Although i get this error, the new record is inserted in the DB... I have also selected option "Only when current value in session state is null" for source used for all fields of form. What am i doing wrong? I thank in advance all replies!

Hi again
Because you have a trigger on the table that selects the current max(ID)+1, when creating the form you should have used "Existing Trigger"when defining the source for the primary key, not "Existing Sequence". You should also change the trigger to use the sequence.NEXTVAL for the ID.
When you created the form using "Exisitng Sequence", Apex would have created a "Get PK" process which gets the primary key value from the sequence before passing control to the DML process. You should delete the Get PK process and let the database trigger do it's job.
In the DML process, set "Item Containing Primary Key Column Value" to the page item name e.g. "P5_ID", and set "Primary Key Column" to "ID" (the name of your table column).
That should do the trick.
Cheers
Richard
Message was edited by:
Richard.

Disk Utility "Unable to create" Disk Image "error -39"

I am trying to create a disk image using Disk Utility of my wife's user area for backup. Everytime I try, I get the same result. Disk Utility spends several hours creating the archive, then at the very end it generates an error message and terminates the process. The error message is always "unable to create "user" - error -39".
The problem follows her data and not her computer. I backed up her user to an external drive and did the image creation on another computer. Same result.
When I do the same on my computer, the process completes fine.
What problem is Disk Utility having? Where can I find the meaning of Disk Utilitility's -39 error?
PowerBook G4 Mac OS X (10.4.5)

I am still experimenting. To narrow the problem, I decided to create individual disk images of the folders in the User folder. The first one I tried was 7 GB and worked fine. Overnight, I tried one that is 13 GB. It failed with an out of room message on the startup disk! The startup disk has 17 GB free. Nothing should have been written to the startup disk!
This time, I configured Disk Utility to read from the startup disk and write to an external disk. The destination disk had more than enough space. But, I ran out of space on the source. It appears that Disk Utility is writing all or a portion of the compressed file to either the startup or the source disk and running out of room.
Previously, when I created the image of my user folder (instead of my wife's), the source was my user folder on the startup disk and the destinaion for the image was on an external disk. The difference I see is that my startup disk has enough free space for the entire compressed image file.
In my first attempt that gave me the -39, both the source and the destination disks were external. So maybe Disk Utility is creating the image on the source and at the end copying it to the destination. This would explain the difference in the error messages.
I'll try to confirm all of this in the next few days and report my findings.

Disk Utility: after creating the .DMG (compressed image) When "scan image for restore" finishes it displays "unable to scan (internal error)". Since the process was scanning for about 1 hr is this a fake warning?

External 500GB drive is partitioned with 400GB for Mac OS extended (journalling) and 2nd partition formatted today as "ExFAT".
Yesterday I tried to create a disk image of my HD to no avail - this was compressed on a FAT partition. I got a warning after running the <scan image for restore> saying "unable to scan (internal error)"
I rang Apple support who suggested formatting a partition as MAC OS extended (journalling) and choose to save the image as "read/write'. The image process stopped writing at about 200GB and then the file size jumped to 499GB (ie the size of the HD). But the process did nothing for about an hour so I foce quit disk utility (as suggested by apple support)
My current attempt was to format the external drive again; this time with a 400GB Mac OS extended (journal) format; plus a 100GB ExFAT format partition. The new image was created after about 2.5hrs with a compressed size of 149GB. However, after running the "scan image for restore" facility I got the warning message "unable to scan filename " (internal error). The process was scanning the image file according to the progress bar - this took about hour - thus the warning is a puzzle.
If anyone can say more about this error I would really appreciate knowing tips for using disk utility. The screen grab is below.
"unable to scan filename " (internal error)
thanks

Thanks for a quick reply <baltwo>. You’ve answered that it is not a fake message!
fyi: I thought that I would use my external Buffalo for two purposes; namely the smaller ExFAT partition for copying stuff to my win7 netbook. The larger partition was to be used as my imac image of SL. So this was my first attempt at using disk utility - the idea being to hold an image backup at another location. Plus I now have the Lion thumbdrive ready to upgrade from SL and so being cautious wanted to have a SL image backup
Anyway I followed the apple instructions using my mac 10.6.3 install DVD but it would appear from other discussions that <unable to scan (internal error)> is not unique to me.
I’ll get back to apple telephone support for further advice.
I would though be grateful for an “idiots’ guide to making an image backup of my internal HD that runs SL 10.6.8
eg should I have just one partition on the external USB drive? format it as Mac OS extended? create the image as compressed or read/write? Basically I’ll do whatever will work!!
thanks again

Error Unable to fetch authentication_scheme

I have imported a HTMLDB application into a new workspace.
When I try to run the application I get the error:
Error Unable to fetch authentication_scheme in application 100
I need to be able to use this application with other workspaces (the schemas are owned by different owners but are identical).
Please help ... Thank you, Rick
Here is the Debug information:
0.01: S H O W: application="100" page="1" workspace="" request="" session="1302816591079752337"
0.02: ...Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.02: alter session set nls_language="AMERICAN"
0.02: alter session set nls_territory="AMERICA"
0.02: ...Setting NLS Decimal separator="."
0.02: ...Setting NLS Group separator=","
0.02: ...Setting NLS date format="DD-MON-RR"
0.02: NLS: Language=en-us
0.02: Application 100, Authentication: CUSTOM2, Page Template: 5231931949198887
0.02: Show ERROR page...
0.02: Fetch session state from database

I don't know what APEX is?
What I have is one instance or SID called "smb"
I installed htmldb there.
I also have created 4 identical schemas there. (one for each of my developers)
I have created 4 htmldb workspaces (one for each schema).
I built the application (to edit some of the tables in the schema) in one of the workspaces.
All I want to do is get the application into the other workspaces so that the other developers can use it.
I used the export/import button at the application level to export the application:
File Format: UNIX
Owner Override: the schema of the new developer
Build Status Override: Run and Build Application
It created a file f114.sql
I then logged in to htmldb in the new workspace of the schema for the new developer.
I clicked on the "Create Application Button" then selected "From an Application Export File"; browsed for the exported file and opened it. This put its path in the Import File text box. I selected File Type: Application/Page Export.
I got:
The export file has been imported successfully. If you wish to use this file to install press Install:
I pressed Install and got:
Logged Into Workspace: KODIESMB1
Export File WorkspaceID: 633628732993759
Export File Application: 114
Export File Version: 2004.07.04
Export File Parse As Schema: KODIESMB1
Application Origin: This application was exported from another workspace.
Parse As Schema - Select Schema - KODIESMB1
Build Status - No Build Option - Run Application Only Run and Build Application
Install As Application Reuse Application ID 114 From Export File
Auto Assign New Application ID
Change Application ID
I pressed "Install Application" and got:
The application could not be installed because it already exists in different workspace. If you wish to install the application, please do the following:
Remove the existing application from the workspace it currently exists in.
OR
Change the application ID in your export file. An application ID that's currently available you can use is 101.
Upload the changed export file to the repository, and re-install your application.
It took me to the repository ... I selected the import and changed the ID to 101 and pressed install and got:
Application 101 installed
I pressed the Run button and got:
Error Unable to fetch authentication_scheme in application 101.
OK
I pressed OK and it took me back to the Post-App Install Utility Option.
I do not know what to do since I don't understand the Error?
Thanks,
Rick

ORA-29400: data cartridge error/IMG-00703: unable to read image data error

Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
ORA-29400: data cartridge error
IMG-00703: unable to read image data
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 75
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 65
ORA-06512: at "ORDSYS.ORDIMG_PKG", line 37
ORA-06512: at "ORDSYS.ORDIMAGE", line 927
is raised when the following trigger is processing certain JPGs (example). Other JPGs are handled as expected:
create or replace trigger photo_size_trg
before insert or update on photos
for each row
declare
photo_width integer;
begin
-- Check to see if the new photograph is different from the old one...      --
if dbms_lob.compare(:old.photo, :new.photo) != 0
then
    -- ...if so, check to see if it's wider than the desired 250 pixel        --
    -- maximum...                                                             --
    photo_width := to_number(ordImage.getMetadata(:new.photo)(1).extract('/ordImageAttributes/width/text()').getStringVal());
    if photo_width > 250
    then
      -- ...and if so, apply an image transform that will resize to the photo --
      -- to a maximum of 250 pixels wide, keeping the original aspect ratio. --
      -- There doesn't seem to be an elegant way of specifying a constraint   --
      -- in one dimension like this, so the height is specifed as a large     --
      -- enough value to cover all practical contingencies.                   --
      ordImage.process(:new.photo, 'maxScale=250 10000');
    end if;
end if;
end;Any thoughts/suggestions?

hi,
I am getting following error,kindly help me out to rectify this ..
thank you
ORA-29400: data cartridge error
ORA-00600: internal error code, arguments: [kokbCollTerminate], [13], [], [], [], [], [], []

Error Unable to fetch authentication_scheme in application 134.

Hi,
I got the following error while migrating one of my application from one workspace to another in the same APEX (2.2) instance but the schemas are different in both cases.
"Error Unable to fetch authentication_scheme in application 134."
Here are the more detailed information:
1) I have a workspace 'SUM_DEMO' under schema 'DEM_DEV'
2) Created a new workspace 'MUD_DEV'. Also, created a new schema 'MUD_DEV' in the process of creating this workspace. I had choosen 'New Schema' rather than 'use existing schema' and created this new schema.
3) Developed an application 'TestPrinter' in workspace 'SUM_DEMO'.
4) Export this application using Export functionality of Apex.
below are the some of the parameters that I have selected during export.
     Owner Override : MUD_DEV
     File Format: DOS
5) Import this application in workspace 'MUD_DEV' that is under different schema 'DEM_DEV'.
below are the some of the parameters that I have selected during import.
     Parse as Schema: MUD_DEV
     Auto Assign New Application ID
6) getting this error:
     "Error Unable to fetch authentication_scheme in application 134."
though application 'TestPrinter' doesn't has any authentication !!
For more information, I am pasting the debug information from the page.
0.00:
0.00: S H O W: application="138" page="1" workspace="" request="" session="1938540460984835"
0.00: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
0.00: alter session set nls_language="ENGLISH"
0.00: alter session set nls_territory="UNITED KINGDOM"
0.00: NLS: CSV charset=WE8MSWIN1252
0.00: ...NLS: Set Decimal separator="."
0.00: ...NLS: Set NLS Group separator=","
0.00: ...NLS: Set date format="DD-MON-RR"
0.00: ...Setting session time_zone to dbtimezone
0.00: NLS: Language=en-gb
0.01: Application 138, Authentication: CUSTOM2, Page Template: 10291226255067961
0.01: Show ERROR page...
0.01: Performing rollback...
0.01: Fetch session state from database
0.01: Processing point: AFTER_ERROR_HEADER
ORA-0000: normal, successful completion
Error Unable to fetch authentication_scheme in application 138.
OK
0.01: Processing point: BEFORE_ERROR_FOOTER
0.01: ...Determine if user "DEV" workspace "5389124302818204" can develop application "138" in workspace "5389124302818204"
Please suggest me some way to get rid of it.
Thanks,
Sumit

Sumit,
5) Import this application in workspace 'MUD_DEV' that is under different schema 'DEM_DEV'.I don't understand "under different schema 'DEM_DEV' ". How many schemas are assigned to workspace MUD_DEV and what are those schema names?
What do you want the parsing schema of the application to be in the MUD_DEV workspace?
Scott

Form Error 40507: unable to fetch next query record

Hi there folks,
I have a Form (10g) where I have a Master Block and a Detail block. However, the other day, there was an Error reported:
ORACLE error: unable to fetch next query record
When we do capture Errors, we also capture the Last Query run. From that, it says that the last record that was queried was in the Detail block (Which is multi-record block) in tabular form. I looked at the Error Message but there is not much information on this Error.
So, it's just a base table block and it has a drop down list which has two values. Any ideas what could have happened?
Thanks!

The Block is based on a a table. As a mattr of fact, there are 3 blocks in the form and they are all based on tables. Now, it migth be wrong for me to assume that the detail block in the one that caused the problem just because the Last Query was based on the detail block.
Block 1 is a single record block -- Master Block
Block 2 is a tabular block -- Detail Block
Block 3 is a tabular block -- Detail Block
There are two relations:
Block 1 and Block 2
Block 1 and Block 3

Uncaught error fetching image: java.lang.NullPointerException

Hi everybody,
I am developing standalone application using NetBeans,the aplication is running fine in netbeans IDE but not when Jar alone tried to run.I kept all the files related to application with the jar.
when running jar,the app is running fine upto some extent,and throwing exception at the time of fetching images from images folder which is placed inside "src folder"
class files package and images folder are in the src folder. the code is like this:
mLogo = new JLabel();
        URL lUrlLogo = getClass().getResource("/images/eaze.gif");
        System.out.print(lUrlLogo);
        Image lLogoimage = Toolkit.getDefaultToolkit().createImage(lUrlLogo);//.getImage(lUrlLogo);
        ImageIcon licon = new ImageIcon(lLogoimage);
        mLogo.setIcon(licon);i tried by using Mainclass.class.getResource("/images/eaze.gif");
and also by using thread but dint solved
The exception is like this:
Uncaught error fetching image:
java.lang.NullPointerException
at sun.awt.image.URLImageSource.getConnection(URLImageSource.java:99)
at sun.awt.image.URLImageSource.getDecoder(URLImageSource.java:113)
at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:240)
at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:172)
at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)

don't specify an absolute path line "/images/eaze.gif" but use a relative path like "images/eaze.gif" or you might need the complete package path.

Pinterest: "Oops! Unable to fetch image" error

Similar Messages

Maybe you are looking for