Pinwheel Bug when trying to "Create"

I've tested on two computers. An 08 Mac Pro and an early 08 MacBook Pro both running 10.6.4. I noticed that sometimes (not always) especially after using iPhoto, exiting, iPhoto does a DB upgrade, then relaunching iPhoto, that choosing Create | Book or Card that there is a long load time with the pinwheel. The Mac Pro takes about 30 seconds to load the create a book, but the MBP takes about 2 minutes to load completely, the entire time sitting with a pinwheel.
Has anyone seen this behavior? I was going to reinstall, but two Macs are doing it. Thanks.
Message was edited by: theBigD23

No one has seen this? I was actually using the new MacBook Airs in the store and the exact same thing happened. It's 100% a bug. I've seen the same exact thing on three different systems.

Similar Messages

BUG! iphoto stalls when trying to create a book and no event is selected

however, works fine when trying to create a book and an event or an album is selected... obviously a bug.

Solution - do not do that
and report to Apple - iPhoto menu ==> provide iPhoto feedback
But it is likely that updates for '09 are over since it is a couple of years old and '11 is out
LN

MissingResourceException when trying to create a destination

Hi,
when trying to create a Destination as described in the SAP HANA course week 6 Unit 2 and also in this blog
How to connect the SAP Business Suite to the SAP HANA Cloud Platform using Gateway as a Service Trial Edition
i'am getting a MissingResourceException:
However, if i change the Destination name to whatever else (i.e. opensapThorsten) it works. Maybe this is a bug?
Thanks and regards
Thorsten

Hi Thorsten,
Any chance you already have a destination with name "opensap"? This is what the DUPLICATE_DESTINATION_ERROR seems to infer.
Otherwise, I agree it should be handled more gracefully and have already forwarded it to the responsible colleagues.
Cheers,
--Vlado

NI-VISA 5.1.2 exits/closes right after launching it on a Linux CentOS 6.2 PC, also crashes LabVIEW when trying to create VISA ref constant for VISA Open.

After installing LaBVIEW 2011 and NI-VISA 5.1.2 on a CentOS 6.2 PC, I had noticed a problem with trying to use the VISA vi's in LabVIEW, basically it's not working for me, LabVIEW crashed when trying to create a control or constant for the VISA Open vi. Tried to launch the VISA tools, they all start and then close abruptly. NI I/O Trace only shows one line.
I did read though many threads and decided to collect the NI system.log, which is attached. (system.log.gz). I did notice a strange message in here about nivisaserver:
/usr/bin/tail --lines=25 /var/log/messages:
May 22 11:18:48 localhost abrtd: Package 'nivisaserver' isn't signed with proper key
May 22 11:18:48 localhost abrtd: Corrupted or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (res:2), deleting
Thanks!
Solved!
Go to Solution.
Attachments:
system.log.gz ‏621 KB

MountainMan12 wrote:
After installing LaBVIEW 2011 and NI-VISA 5.1.2 on a CentOS 6.2 PC, I had noticed a problem with trying to use the VISA vi's in LabVIEW, basically it's not working for me, LabVIEW crashed when trying to create a control or constant for the VISA Open vi. Tried to launch the VISA tools, they all start and then close abruptly. NI I/O Trace only shows one line.
I did read though many threads and decided to collect the NI system.log, which is attached. (system.log.gz). I did notice a strange message in here about nivisaserver:
/usr/bin/tail --lines=25 /var/log/messages:
May 22 11:18:48 localhost abrtd: Package 'nivisaserver' isn't signed with proper key
May 22 11:18:48 localhost abrtd: Corrupted or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (res:2), deleting
Hi MountainMan,
Thanks for attaching the system report log -- I believe I have a solution for you :-) Let's look at a few of the lines:
890: /proc/meminfo:
891: MemTotal: 3894712 kB
1726: /proc/iomem:
1784: 100000000-12dffffff : System RAM
1807: /bin/dmesg:
1820: BIOS-provided physical RAM map: 2576: [nipal] More than 4GB of addressable memory detected.
1838: BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
2576: [nipal] More than 4GB of addressable memory detected.
2577: [nipal] This configuration is not supported. Check the release notes for more information.
Starting at the bottom at lines 2576..2577, dmesg had more than just the NI-VISA server signing notification. At system boot, the NI kernel modules refused to load because they detected more than 4 GB of addressable memory. But, if you look towards the top at lines 890..891, meminfo says you have less than 4 GB of system memory, which makes it seem like the NI modules don't know what they're talking about. However, if you look at the report from iomem a little further down on lines 1726..1784, system RAM has been re-mapped above the 4 GB boundary. While your system doesn't have more than 4 GB of RAM, some of its memory has addresses above 4 GB, which the NI modules cannot use and so they refuse to load. How did that happen? Your system BIOS provided a physical RAM map with usable addresses above the threshold (line 1838).
The fix here is simple -- you need to tell the kernel to reserve addresses above 4 GB [1] so that it won't remap the RAM to higher memory. Once all of the RAM has addresses below the 4 GB threshold, the modules should load and VISA/LabVIEW/et al should stop misbehaving.
It seems to me that LabVIEW is not handling this situation very gracefully, and maybe you can work with Kira to file a bug report.
[1] Re: Successful SUSE linux and DAQmx install; nilsdev and other utilities missing.
http://forums.ni.com/t5/Multifunction-DAQ/Successful-SUSE-linux-and-DAQmx-install-nilsdev-and-other/...
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

When trying to creat a desktop icon, it does not go to the URL.....instead I get 'script' and not a website......the script has http//etc but I am not directed to the website......I previously had IE 8 (on Vista).....is that the problem...

Question
When trying to create a desktop icon, it does not go to the URL.....instead I get 'script' and not a website......the script has http//etc but I am not directed to the website......I previously had IE 8 (on Vista).....is that the problem?I do not have any installed plugins....at least none that I know of.....remember I am a new user......Basically, the desktop icon is not going directly to the Mozilla FF to get me to the web site I need to go to.....FF works when I use the Mozilla FF icon.....just not the icons I create.....THANKS!!! I have also tried reinstalling FF and get the same results.....HELP!!!

The address beginning with file:/// denotes a saved file (local file). The file may not be present. You can try dragging the site icon of this page on the left edge of the location (Address) bar and release it on the desktop. Please try opening it. If it still shows an error it could be a problem with the system's zone permissions. You can try setting each zone in the Windows Control Panel or IE > '''Internet Options''' > '''Security''' tab to '''Default Level'''.

Error message in Adobe Pdf in printer device panel when trying to create a pdf document. I have CS3

Error message in Adobe Pdf in printer device panel when trying to create a pdf document. I have CS3 Web Premium with Acrobat Professional 8. I use it fine on my old computer with Windows XP. I recently got a new laptop with Windows 7. I installed all my Adobe programs, and I think they are working. When I look at Adobe PDF in the device section of the Control Panel it looks okay. But when I try to print a Word, Photoshop, or HTML page in PDF, nothing happens. I have tried printing both as File>print and using the PDF tab on the top menu bar. I look at the device in the control panel and it has the yellow error warning symbol and suggests trying to troubleshoot. I look at the document list and it says status "error". When I try troubleshooting Windows suggests doing some Home Sharing and also suggests canceling the document I'm trying to print. I tried re-installing just Acrobat 8 from CS3 (and have to use Photoshop CS4 disk for shared documents I guess). I ran into a can't locate adobepdf_dll file, so did a web search on this issue and found a suggestion that I find and use the adobepdf_dll_64 file and may have to (I did have to) remove the "_64" for it to work. I think I successfully reinstalled using that dll file- no errors came up anyway. But still when I try printing/converting a photoshop, webpage, or word document into pdf, the pdf device in control panel still gives the error status on the document and gives the same troubleshooting advice. Help?

I just compared the properties between the two computers. On the old computer it has the port as "My Documents/*.pdf". On my new computer it lists the port as "LPT1". I tried changing the port to "Print as File", but when I try printing a photoshop picture as pdf, I get a "Access Denied". I then tried to create a new port on the device control panel. I tried to create a local port "My Documents/*.pdf" port but was denied. I ten tried to create a new port type and control panel asked for an INF file. I wonder if this is where my problem lies. Thoughts?

Error when trying to create a JCO Destination

Hi
I receives the following error when trying to creat a JCO Destination, clicking on the button in the host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
Error stacktrace:
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:880)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:740)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Any ideas?
Regards
Kay-Arne

Hi,
Have you configured your SLD? Check JCO Destination error out or search for "com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus" in the SDN forums.
Best regards,
Vladimir

Error when trying to create Delivery

Hi SAP Gurus
When trying to create delivery from Sales order(Va02>Sales document>Delivery),it is taking to Delivery(Vl01n).But there at the initial screen itself it is displaying the error message"Order doesnot exist"
Kindly let me know where could be the issue.
Regards
Sushmitha

Hi Laxmipathy
Tx for your reply.
I have checked the doc flow and could see no blocks.
No reason for rejections.
Also seen VOV7 and checked for the item cat details.I could see "H-delivery Related Billing-No Zero Quantities" maintained for Billing Relevance field.
Tx in advance.
Regards
Sushmitha

Error when trying to create a new Voyager Workspace through Infoview

Hi,
When trying to create a new Voyager Workspace through Infoview, I get the following Error
"An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
I clicked on New Voyager Workspace & then it displays the list of connections available. When, I click on any connection , then I receive thefollowing error
"An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
An Insight of our environment regarding this, we have an clustered environment with Voyager Installed. Platform is Windows Server 2003. We have all the required Microsoft client tools installed on the Production Servers.
This was working fine earlier. We were able to create Voyager WorkSpace at one instance of time. The problem at that point of time was the MDAS Server was not showing up in CMC, i.e as we had clustered environment, only one of the MDAS Server was showing up in the CMC. it was missing the other MDAS Server. but, at that time we were able to create Voyager Workspace.
So, in order to view the other MDAS Server in CMC, we had changed the name of the Server in CCM for both the MDAS Servers.
In detail, Server A.MDAS Server & Server B.MDAS Server- they both were not showing up in CMC. only one of them was showing up in Servers list in CMC.
So, in CCM we had changed the name of Server1.MDAS server to be Server1 &
for Server2.MDAS Server to be Server1 as well.
AFter this both the MDAS Servers were showing uo in CMC.
but, when I login into Infoview & click on new Voyagerworkspace & select a connection, I recieve the follwoing error
"An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
Request to let me know the possible steps in resolving this ASAP

Hi,
Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
It is possible that you dont have development authorization.
Also the issue could be that the system is not configured to create the objects begining with Z.
Check this with basis as well.
Thanks
Ajeet

Error when trying to create XUSER information for SAPServiceSID

Hi all,
I am getting the following error when trying to create the XUSER information for the SAPServiceSID user on a WINDOWS/MAXDB 7.9 install.. Does anyone know a FIX for this?
>xuser -c .\SAPServiceSID -U c -u CONTROL,P@ssw0rd -d SID -n HOSTNAME -S INTERNAL -t 0 -I 0 set
FATAL: Close xuser entry failed: could not write USER data [1307]
I am running the command as the SIDADM user.
I have tried the solutions in the following notes without success:
39642
1542818
39439
1875264
1409913
Thanks!

Hi Jayson,
Try this.
Solution
Add the "Administrators" group under:
Control Panel
-> All Control Panel Items
   -> Administrative Tools
      -> Local Security Policy
         -> Local Policies
            -> User Rights Assignment
              -> Take ownership of files or other objects
You check you command and modify.
xuser.exe -c Hostname\SAPServiceSID -U DEFAULT -u Username, Password -d SID -n Hostname -S Schema_Name -t 0 -I 0 set'
Regards,
V Srinivasan

Error when trying to create a site collection

Hi,
I receive the following error when trying to create a site collection in sharepoint 2013. Any ideas of what I can do to resolve?
Sorry, something went wrong
Failed to call GetTypes on assembly Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.ConnectionUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.RequestUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.LoadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.UnloadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation.
thanks,
Sherazad

Hi ,
Based on the error message, please check whether you have installed the spPowerPivot.msi add-in on each of your SharePoint server, and ran the configuration wizard, make sure that the powerpivotwebapplicationsolution.wsp
is deployed correctly.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Satellite U205-S5034 - Error when trying to create the recovery discs

Hi Everyone,
I am having trouble with The TOSHIBA Recovery Disk Creator. When trying to create the recovery discs this error comes up:
An unexpected error occurred. Please quit this application and restart it. (Error Code: 0F00FE-F1-00000002)
The machine is a Satellite U205-S5034 running XP Pro SP3.
Any help will be greatly appreciated. Thanks and have a great day.
DaveMatt44

Hi
What kind of DVDs you are using for creating a Toshiba recovery disc? As yet I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. Friend of tried DVD+R and he couldnt create a recovery disc. After that he tried DVD-R and all was fine but I dont know why this happened.
So please try other discs.
Furthermore check the Toshiba page for a firmware update of CD/DVD drive. Maybe it will help you.

Portal runtime error when trying to create new Iviews in EP

Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AM

Krishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

Error when trying to create new element in workflow container

hi experts,
I hit an error 'cusomer-own workflow are not allowed to be configure" when trying to create a new element in the container.
have anybody come across this problem and how to overcome it
TQ

Aren't customer task not used anymore?
Or am I mixing things up here.
Well the problem isn't a problem it is SAP standard behaviour you simply can't configure customer tasks (type T in PFTC)
You can only configure Standard Tasks (TS) or workflow templates (WS)
Kind regards, Rob Dielemans
Edited by: Rob Dielemans on May 29, 2009 12:51 PM
Just had a look at the SAP help and indeed types T aren't allowed anymore SAP gives the solution to copy the customer task, this will automatically change it to a standard task

Pinwheel Bug when trying to "Create"

Similar Messages

Maybe you are looking for