Pinwheeled while exporting to itunes- is it on my computer in

I have Ibookg4 garage band. It pinwheeled while exporting to itunes and i forgot to save. Please help in recovering my file. I'm not good with computers so i'll need step by step of what to click on. Thanks. I tried to follow steps from another post but my computer is so old i have different steps.

Dear Hangtime or helpful awesome person who is a computer wizard,
I still don't know what to do. I controlled rt clicked. This is what pops up.
open
open with
get info
open enclosing folder
move to trash
copy color label
toast it
automator
disable folder actions
configure folder actions
I clicked get info- Is that right?
what do I click on then? there is a whole other window thing that pops up. there isn't anything that says media folder.

Similar Messages

HT2311 After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go). What do I do?

After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go). I also looked for the new iTunes by clicking on my Hard Drive icon but didn't see it there either. I only see the icon for the old iTunes. What do I do?

The exclamation mark means that the app has lost the link to the actual file.
First step: try and make sure the iPhoto Library is working correctly:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

IMovie 10.02 does not have program memory while exporting movie

Hi there,
I would appreciate any help to learn what iMovie does while exporting a movie I just made.
I am using the latest iMovie under OS Maverick and I have just created a project, added soundtracks and wanted to export the project
into a movie. The project is 31 minutes long and trying to export it as a file in HD quality, iTunes breakes off after a while and shows
the error message, that my system does not have any program memory anymore and that I have to shut down all used programs in order to
avoid problems with my computer.
Did anybody have had this kind of problem before? With the previous version, I made so many movies, partly almost an hour long and never had
any trouble in doing so. I could export as HD movie or into Quick Time but now the game has changed and I do not know exactly what I did wrong.
Why would there be not enough recources even though I upgraded my RAM to 8 GB.
Cheers
Zuse
PS
Sorry this might sound a bit funny, but my program language is German so I translated the German error message

Hello Zuse,
Thanks for your answer...
I also walked the forums about this and no solution. I contacted yesterday assitance call and the person does not see more where the problem is. I tried to repair the disk and permissions thereof, restart in safe mode and reinstall iMovie 10 but to no avail. He even advised me to reinstall Maverick or as you say, to use the old version of iMovie 9. I hope Apple will soon respond to this issue and provide an update because it is not normal at all.
Best regards!
Phil

Can't export to iTunes anymore

Been using GB for about six months. Yesterday after finishing a song in GB, I told it to export to iTunes, and it tried...it finished up until the part where iTunes automatically opens and the file appears in iTunes. Instead of that happening, iTunes opened, and I saw in the iTunes status window: "Copying 1 of 1: Bounced" then that failed, then the OSX message "Error: Cannot read or write to disk." I checked the permissions for the HD, and "Read and Write" is NOT highlighted as an option. However, I can save documents anywhere but GB. So I reinstalled all my OSX software, including iTunes. Now iTunes won't open at all--it tries, and then I get a message that it unexpectedly quit. I thought it might be a Library issue, so I tried dragging the library onto the desktop, even the old libraries. Nothing changed. I reinstalled iTunes, but still the same thing. I don't think it's a GB problem, but I really can't tell at this point. I posted a similar question in iTunes, so hopefully someone from one of the forums can help...Please?

Deauthorization:
If you have ever purchased songs from the iTunes Music Store, Apple has placed digital rights management copy protection software on your main hard drive (where Mac OS X lives) that identifies you as the legal purchaser of those recordings.
If you back up your whole hard drive, reformat it and re-install everything, or if you put in a new hard drive and set it up to be your Mac OS X main drive, you lose the right to access any of the iTunes Music Store songs that you have purchased, because you have inadvertently deleted Apple's digital rights management copy protection keys that authorize you as the owner of those recordings you purchased.
So if you need to do this to your main hard drive, first you must go into iTunes and do a de-authorization. When you set up your new hard drive, you have to re-authorize.
Apple sez:
[blockquote]To deauthorize a computer to play songs or spoken word content purchased from the iTunes Music Store, choose Advanced > Deauthorize Account. Then choose "Deauthorize Computer for Music Store Account" and enter your Apple or AOL ID and password.[/blockquote]
Similar steps have to be taken with many other music programs that utilize copy protection in software, such as Sibelius, SampleTank, Cubase, etc.
It's confusing because all that Apple and other companies tell you that you must de-authorize and then re-authorize if you move all your files to a new computer. While that's true, it's misleading, because the authorization issue also applies if you move to a new hard drive inside your existing computer.

Issue while exporting report in Excel Format

Hello,
I am facing problem while exporting the report in Excel Format. After analysis, I think that it could be due to two reasons, either we are using wrong versions of Jars, or we are using wrong API. Here is the code, approaches and problems we are facing. Please help.
First approach we are using is:
// using basic API
import com.crystaldecisions.reports.sdk.ReportClientDocument;
// get client document from crystal report API and open the report by specifying the report name, with path
               ReportClientDocument reportClientDoc = new ReportClientDocument();
               reportClientDoc.open( reportPath, 0 );
               // give chance to extending classes to configure the report document by POJO or by sql parameter etc, just adding the parameters infromation using ParameterFieldController
               configureReportDocument( reportClientDoc, reportMetadata, reportData, reportContext );
               // get data source of crystal report
               Object reportSource = reportClientDoc.getReportSource();
               // export the data - we have also tried with MSExcel format
               ReportExportFormat exportFormat = ReportExportFormat.recordToMSExcel;
               LOGGER.debug( "exportFormat[" + exportFormat + "]" );
               ByteArrayInputStream byteArray = (ByteArrayInputStream) reportClientDoc.getPrintOutputController().export(
                         exportFormat );
Problem Faced: Specified Excel format is not supported.
Second Approach: We come to know that excel format is supported with new releases and with occa package.
Then we tried with import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument; It ask to set the ReportServer. When we are trying to set the server as
               reportClientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
Application is unable to find 'ReportClientDocument.inprocConnectionString' property. It seems like we are using some old jars. However we have downloaded the latest released jars for eclipse 2.
Please help for it. Issue is to export the report in excel format, which is currently working fine for PDF. If this problem is related to Jars, please suggest the path to download the latest jars. We also looking for the latest jars like rasapp and rascore etc. But these are not available with Crystal Report for Eclipse 2 release.
Waiting for urgent help. Thanks you..
Regards,
Mohit

Hi,
Send me Environment Details .
Here is the code snippet for exporting report to excel format:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import="com.crystaldecisions.sdk.framework.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.managedreports.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.infostore.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.*" %>
<%@ page import="java.util.*" %>
<%@ page import="java.io.*" %>
<%
String username ="Administrator";
String password ="";
String cmsname ="localhost:6400";
String Authen ="secEnterprise";
     //connecting to Enterprise
     IEnterpriseSession es = CrystalEnterprise.getSessionMgr().logon(username,password,cmsname,Authen);
     //get the report App Factory form the Crystal Enterprise
     IReportAppFactory appFactory = (IReportAppFactory) es.getService("","RASReportService");
     //get the infostore service form the Crystal Enterprise
     IInfoStore istore = (IInfoStore) es.getService("","InfoStore");
     //get the report by name from crystal Enterprise
     IInfoObjects iobjects = istore.query("Select * From CI_INFOOBJECTS Where SI_NAME = 'sampleramz2.rpt' and SI_INSTANCE = 0 ");
     //open the report in the report doc object.
     ReportClientDocument Doc = appFactory.openDocument((IInfoObject)iobjects.get(0), 0, Locale.ENGLISH);
     // WORKING WITH THE PRINT OUTPUT CONTROLLER
     //Use the report documents PrintOutputController to export the report to a ByteArrayInputStream
     ByteArrayInputStream byteIS = (ByteArrayInputStream)Doc.getPrintOutputController().export(ReportExportFormat.recordToMSExcel);
     // EXPORTING THE REPORT
     //Create a byte[] (same size as the exported ByteArrayInputStream)
     byte[] buf = new byte[2000 * 1024];
     int nRead = 0;
     //Set response headers to indicate pdf MIME type and inline file
     response.reset();
     response.setHeader("Content-disposition", "inline;filename=ramz");
     response.setContentType("application/xls");
     //Send the Byte Array to the Client
     while ((nRead = byteIS.read(buf)) != -1)
          response.getOutputStream().write(buf, 0, nRead);
     //Flush the output stream
     response.getOutputStream().flush();
     //Close the output stream
     response.getOutputStream().close();
%>
Let me know any information is needed,
Regards,
Rameez

How to move Mobile Applications folder while sharing an Itunes library

For reasons that would be long and hard to explain, I decided some times ago to open a second user on my Book Pro dedicated to my music collection. The collection required to be stored on an external HDD, so the second user's Itunes folder links to a folder where all music is stored, and I put it with all library files (xml etc) in the Shared folder. Now I have decided to let the primary and mostly used user to share the same music of the secondary one. I easily succeeded in doing this, just simply opening the primary ITunes and ask it to link to the Itunes folder under the Shared folder. I have got my entire library also from the primary user, with covers and so on.
The trouble is that I use to manage an Iphone with the primary ITunes, and since I have not moved the Mobile Application folder (and what more?) into the shared ITunes folder, I cannot see anymore all data and applications into my IPhone section under ITunes, and I do not want to run experiments, doing a sync and just running the risk to lose all. How can I share the same ITunes library between two users, but to allow one of those still to see the IPhone data that was originally managed only from her ITunes, that now addresses to the ITunes folder under Shared folder that addresses to a HDD?.....

Still misspeaking. Further use reveals that while the users iTunes use the shared file, when the phones add new apps their iTunes recreates its iTunes Media directory in the users home folder. This time I can exit iTunes, move the apps to the shared Mobile Applications, delete and empty trash the original apps/ and folder, then the users iTunes will find the app in the shared folder when it restarts. Clearly not very tidy...

Error while exporting a table - EXP-00091

I am doing an export of a table. The table has 1000838 rows. After the export is completed,
when I checked the log - it said
Connected to: Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.4.0 - Production
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table FIDA_LABEL 1000838 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.
I looked in the Oracle error messages document and found this out ---
EXP-00091 Exporting questionable statistics
Cause: Export was able to export statistics, but the statistics may not be useable. The statistics are questionable because one or more of the following happened during export: a row error occurred, client character set or NCHARSET does not match with the server, a query clause was specified on export, only certain partitions or subpartitions were exported, or a fatal error occurred while processing a table.
Action: To export non-questionable statistics, change the client character set or NCHARSET to match the server, export with no query clause, or export complete tables. If desired, import parameters can be supplied so that only non-questionable statistics will be imported, and all questionable statistics will be recalculated.
And this how my export command looks like -
exp vincent/passphr query=\"where state in $\'MD\',\'CA\',\'WI\'$\" file=$EXPDIR/fida_label_9i.dmp tables=vincent.fida_label
log=$LOGDIR/fida_label_exp.log
Ofcourse, I am using the query clause because I really need to and it has always worked when we were in the Oracle 8i environment. We recently moved to the 9i. And this happens in this 9i version...
And I certainly do not want to specify the import parameters to ignore the questionable statistics as no changes are desired in that area...(my hands are tied..).
What could " a fatal error occurred while processing a table " mean? And how can this be traced and troubleshooted ? Or how can I find out if any row errors occurred ? And if required, how do I check the character sets and other likes ?? (I have no idea in this area)
Thanks. All I needed was to get around this error. Your suggesions/responses would be highly appreciated

What version of Oracle 9i are you using? Do you have a standard 'NLS_LANG' environment variable set on client's machines? Or do you set it to different values on different machines?
Here is one of way you could get around it.
Could you specify the export parameter 'STATISTICS=NONE' while exporting the table data?
Try this and see.
If this is successful, you could use the import utility as usual. You could always compute or estimate statistics on the table after import.

Help needed while exporting crystal reports to HTML file format using java

Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanks

the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

Data getting truncated while exporting report to a text file in crystal 10?

Hi All,
I am using crystal 10.When exporting report to a text file ,a dialog prompts asking for Character perinch with a default value 9.If I change the value from 9 to 16 i am getting the correct data(that means character per inch value is 16) and it update "CharPerInch" value in registry under following location to 16.
HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal Reports\Export\Text
The dialog asked for character per inch also has option to select not to prompt again and i also selected that in first go.
When i export the report again in text format it didn't prompt for number of character per inch but the data gets truncated.
What i believe is even though it updates entry in registry and reads, it is not using the same value for export. It never consider the value that is in registry, if the check box is not selected then it is using the value entered in the dialog and if the check box is selected then in the next run it uses the default value as 9.
Can anyone suggest me how to override this problem ? Is there any other setting place in registry where i can enter the number of character per inch.I don't want to crystal to prompt always for character per inch.

Hi Venkateswaran,
The other option to avoid truncation of the data could be
Right click the text filed
Click on Format Text to open the Format Editor
On Common tab check the text box for Can Grow.
This will prevent the data from truncating in preview as well as while exporting to text.
Otherwise you will have to set the characters per inch to 16 each time. I donu2019t see changing the registry value causing any difference here.
Regards,
Aditya Joshi

IllegalArgumentException error while exporting report in PDF format

Hi all,
we are using Crystal Report 2008, Java 1.5.22 and JRC 11.8.4.1094 to export reports in pdf format within java.
It is working fine for all reports except for a specific report where it gives IllegalArgumentException while exporting the PDF.
Below the error occurred:
12:39:16,875 ERROR [c] Disk Exporter: no output file was created by an exporter
12:39:16,875 ERROR <b> PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting export
java.lang.IllegalArgumentException
     at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
     at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
     at com.crystaldecisions.reports.a.e.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
     at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
     at com.crystaldecisions.report.web.event.br.a(Unknown Source)
     at com.crystaldecisions.report.web.event.w.a(Unknown Source)
     at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
     at com.crystaldecisions.report.web.event.av.a(Unknown Source)
     at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
     at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
     at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
12:39:16,875 INFO [c] Disk Exporter: finalizing export to destination
12:39:16,875 ERROR [JRCCommunicationAdapter] Failed to export report
com.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unknown exception is thrown
     at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
     at com.crystaldecisions.reports.a.e.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
     at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
     at com.crystaldecisions.report.web.event.br.a(Unknown Source)
     at com.crystaldecisions.report.web.event.w.a(Unknown Source)
     at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
     at com.crystaldecisions.report.web.event.av.a(Unknown Source)
     at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
     at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
     at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
Caused by: java.lang.IllegalArgumentException
     at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
     ... 56 more
Have an idea?
Thanks

Hello Andrea.
I searched through the SAP Notes for the error that you are encountering. There is an SAP Note that exists titled the following:
1332907 - Report being exported to PDF format using the Crystal Reports for Eclipse 1.x runtime, errors with the exception: PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob
Since you may not have access to the SAP Notes, I will extract the details that are mentioned in the note here:
=============================================
Symptom
Attempting to export a report to Adobe PDF format using the Crystal Reports for Eclipse 1.x runtime results in an exception.
The exception indicates "PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob"
Environment
Windows 2003
Apache Tomcat 5.0
Crystal Reports for Eclipse version 1.x
Reproducing the Issue
Using the Crystal Reports for Eclipse runtime version 1.x attempt to export a report to PDF format that has the "Repeat Group Header on Each Page" option enabled.
Note: This does not occur if this option is enabled in a subreport.
Cause
When the "Repeat Group Header on Each Page" is enabled for a group in a main report the Crystal Reports for Eclipse 1.x runtime is unable to correclty format the PDF document which results in an exception.
Resolution
Updating the application to use Crystal Reports for Eclipse version 2.x runtime will resolve the issue.
The most recent updates to the Crystal Reports for Eclipse runtime can be freely downloaded from the SAP SDN Website.
http://www.sdn.sap.com/irj/boc/crystalreports-java
=============================================
Since you are on JRC 11.8.4.1094 which is Crystal Reports for Eclipse 1.x, this may be the cause of your problem.
I hope that this helps.
Regards.
- Robert

Issue while exporting report to excel

I have a report created using ssrs.
In that i have set the body background property to an image
And also set a header in the report
Now while exporting it to excel, I need to remove the body background image and header
Need Help
Thanks
Abhinav

The workaround is to use a parameter that control the hidden properties and image/value properties of the header contents and background image path respectively. We need to place the header contents to a textbox or a rectangle so that the "hidden"
properties can be set or reset. Similarly for the image path or value properties of body section can be set or reset using expression. I am using external image URL. Refer below step.
1. Add a parameter "Export". Set the Available values
as "Specify values" and add the below labels and values.
Label                                 Value
Header/Image                    Header/Image
No Header/Image               No Header/Image
For Default Values,
Select Specify values option and add value as "Header/Image". Click Ok to close the parameter properties.
2. As my header section contains a textbox and wanted to hide while i export, select the textbox properties and set the visibility/hidden expression as, =IIF(Parameters!Export.Value <> "Header/Image", True, False)
3. Similarly in the report body properties, select the image source option as "External" and set the expression as,
=IIF(Parameters!Export.Value <> "Header/Image", "" , "http://localhost/Testing/NEW_06.jpg")
4. Preview the report and select the export parameter option as "No Header/Image".
Regards, RSingh

Issue while exporting report in PDF using crystal report XI

Hello,
I am facing issue while exporting a report to PDF through crystal report XI. Reports are generating properly in the crystal report browser but when I am exporting the reports in PDF or trying to get print by clicking on print button, reports not generating properly.
Allignment in the exported PDF reports getting changed and reports margin is also changes. Due to this some part of report is chopped and printed on the next page.
I have deployed my application on IBM WebSphere 6.1 server and I am getting following error which might help to identify this issue.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: The response has already been commited.---- Error code:0 Error code name:succeeded
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
     at com.crystaldecisions.report.web.component.o.a(Unknown Source)
     at com.crystaldecisions.report.web.event.br.a(Unknown Source)
     at com.crystaldecisions.report.web.event.w.a(Unknown Source)
     at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
     at com.crystaldecisions.report.web.event.av.a(Unknown Source)
     at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
     at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
     at com.ibm._jsp._CrystalReportViewer._jspService(_CrystalReportViewer.java:107)
     at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
     at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:115)
     at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:168)
     at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:92)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
     at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1425)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:92)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:465)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:394)
     at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
     at com.ibm.ws.ssl.channel.impl.SSLReadServiceContext$SSLReadCompletedCallback.complete(SSLReadServiceContext.java:1812)
     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:152)
     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
     at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:193)
     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:725)
     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:847)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1498)
Caused by: com.ibm.wsspi.webcontainer.ClosedConnectionException: OutputStream encountered error during write
     at com.ibm.ws.webcontainer.channel.WCCByteBufferOutputStream.write(WCCByteBufferOutputStream.java:80)
     at com.ibm.ws.webcontainer.srt.SRTOutputStream.write(SRTOutputStream.java:96)
     at com.ibm.wsspi.webcontainer.util.BufferedServletOutputStream.writeOut(BufferedServletOutputStream.java:438)
     at com.ibm.wsspi.webcontainer.util.BufferedServletOutputStream.flushBytes(BufferedServletOutputStream.java:344)
     at com.ibm.wsspi.webcontainer.util.BufferedServletOutputStream.flush(BufferedServletOutputStream.java:323)
     at com.ibm.wsspi.webcontainer.util.BufferedServletOutputStream.flushBuffer(BufferedServletOutputStream.java:478)
     at com.ibm.ws.webcontainer.srt.SRTServletResponse.flushBuffer(SRTServletResponse.java:452)
     at com.ibm.ws.webcontainer.srt.SRTServletResponse.flushBuffer(SRTServletResponse.java:436)
     at com.crystaldecisions.report.web.viewer.JSPViewerResponse.flushBuffer(Unknown Source)
     ... 33 more
Caused by: java.io.IOException: Async IO operation failed, reason: RC: 64 The specified network name is no longer available.
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:203)
     ... 3 more
Thanks in advance
Alok P.

The stack trace is caused by whitespace in your CrystalReportViewer.jsp file. Look up SAP Note 1199025 for the resolution.
It's not related to the PDF formatting issue. There's been changes to the formatting with the most recent version - Crystal Reports for Eclipse 2.0 - so if you haven't already, I recommend you upgrade.
Note that there's differences in font metric calculation when using Adobe PDF format such that there's no way to get exact agreement between output of the CR and PDF. But the latest version helps greatly.
Sincerely,
Ted Ueda

Issue while exporting report - OBIEE 11g - IIS 7.5

Hi,
We are currently on OBIEE 11.1.1.7.0 version of OBIEE and we have set up proxy through IIS 7.5 on Windows 2008 R2 server.
While exporting our reports, we need to ensure that both Export to excel options (2003 and 2007+) are working fine. However, for some reports, when we try to download the reports to Excel 2007+ format, we get a "Internet Explorer cannot display the webpage" error message. This issue does not appear if we change the URL to directly access Weblogic server (instead of routing through IIS). Wanted to know if anyone have faced similar issue and have found any solution/workaround for same.
Thanks
Hyder

Hyder,
I have achieved this.We have deployed our OBIEE application on Weblogic server not on IIS.
Sasi Nagireddy: How to Export Analysis in Excel 2007 +
Thanks,
Sasi Nagireddy..

Characterset mismatch error while export

Hi,
I am getting characterset mismatch error while exporting a schema.
select * from nls_database_parameters where parameter in('NLS_LANGUAGE','NLS_TERRITORY','NLS_CHARACTERSET')
PARAMETER
VALUE
NLS_LANGUAGE
AMERICAN
NLS_TERRITORY
AMERICA
NLS_CHARACTERSET
AL32UTF8
i have set nls_lang on OS level
NLS_LANG = AMERICAN_AMERICA.AL32UTF8
C:\oracle\ora92\bin>
C:\oracle\ora92\bin>
C:\oracle\ora92\bin>exp hrtemp_v6/hrtemp_v6@testdb file=c:\hrtemp_v6 statistics=
none
Export: Release 9.2.0.1.0 - Production on Mon May 14 11:55:58 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user HRTEMP_V6
. exporting PUBLIC type synonyms
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
EXP-00000: Export terminated unsuccessfully
please suggest , whats wrong here
thanks & regards

i have set nls_lang on OS level
NLS_LANG = AMERICAN_AMERICA.AL32UTF8How and where?
C:\oracle\ora92\bin>At this command prompt, what do you get back from "set nls"
You can use
c:\> set nls_lang=.al32utf8
...right before you issue exp command.

Crystal Report: Error while Export to Excel

We are using combination of Crystal Report 10 With
J2EE, Below source code is working fine While
exporting to PDF, MSWord, RTF format.
if(selectedFormat.equals("MSWORD"))
exportOptions.setExportFormatType(ReportExportFormat.MSWord);
if(iPageFrom>0 && iPageTo>0)
RTFWordExportFormatOptions RTFExpOpts=new
RTFWordExportFormatOptions();
RTFExpOpts.setStartPageNumber(iPageFrom);
RTFExpOpts.setEndPageNumber(iPageTo);
exportOptions.setFormatOptions(RTFExpOpts);
But am getting following error while exporting report
to Excel
com.crystaldecisions.report.web.viewer.ReportExportControl
Invalid post back event : {0}
We would like to know, Is SDK feasible for exporting
to excel or not ?
If yes! then Please suggest us for same.
Thanks In advance :)

I will make sure that I am on the latest patch ie SP4
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
You can find the rumtimes here:
MSI:
https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
ClickOnce
https://smpdl.sap-ag.de/~sapidp/012002523100008782442011E/cr2008sp4_clickonce.zip
Recompile the app and then deploy.
What is the .NET Framework used by the application?
Method of deployment?
OS where app is deployed, x86 or x64?
Are you able to export the report from designer ie CR2008 Standalone?
- Saurabh

Pinwheeled while exporting to itunes- is it on my computer in

Similar Messages

Maybe you are looking for