Pioneer Blue ray burner does not work in a Mavericks.

MY Pioneer Blu Ray burner BRD-RW 206D does not work and I get this message (The disc can’t be used because the disc drive is not supported (error code 0x80020025). I have the last firm ware update in it. It worked fine in Mountain Lion but not in Mavericks.

Hi, everyone
just wanted to report I've been successfully using my Pioneer BDR-208D for a couple of days now with no further problems.
I power-cycled and put to sleep the MacPro a few times, and burned a few DVDs and a couple of BD-RE disks.
So, to summarize my experience:
Pioneer BDR-208DBK in second (lower) bay
Mavericks on Mac Pro (early 2008)
Superdrive in upper bay
Drive not appearing in eject menu button, alt-eject on keyboard
dialog pop-up: "The disc can’t be used because the disc drive is not supported (error code 0x80020025)".
What I did:
Booted back into Lion
Inserted non-blank media in the BD drive (a CD in my case)
Rebooted into Mavericks with the CD still inside the drive
System found the drive and enable eject both on keyboard and menu
Disabled "Put hard disks to sleep..." in Energy Saver prefpane - this is what I believe stopped the seemingly random disappearing of the drive
Hope this helps...

Similar Messages

  • Mp600r does not work after installing mavericks 10.9 what do I do now ?

    Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

    This thread should help:
    https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

  • Safari scrolling does not work in osx mavericks please solve this issue

    safari scrolling does not work in osx mavericks please solve this issue

    I know it is a limited topic, but could you provide a little more detail?

  • I cannot send a reply in imessages. The blue send button does not work

    I am using an Ipad. I cannot reply to a message in imessage. The blue button does not work anymore.

    Do you still have a BitDefender directory in program folders, usual location is C:\Program Files\BitDefender\
    If the directory still exists, the uninstall did not complete fully. BitDefender recommend downloading the uninstaller and running it again. You can get the uninstaller from http://www.bitdefender.com/uninstall
    If that does not work, you can try manually removing the toolbar. Do you have a folder called C:\Program Files\BitDefender\BitDefender 2009\FFToolbar
    The "BitDefender 2009" part will vary depending on the version of BitDefender installed. If that still exists try deleting the contents of the FFToolbar folder.
    BitDefender is likely to have added an entry to the Windows Registry, if you are happy with editing the registry you can remove the entry, for details see the "Windows registry extension" section of http://kb.mozillazine.org/Uninstalling_add-ons
    '''Warning: Only edit the registry if you know what you are doing, making an error in the registry can cause serious problems with Windows, it may even prevent Windows from starting.'''

  • Iphoto 9.2.3 does not work after instal Mavericks

    I had Snow Leopard on my imac and used iphoto 9.2.3 and i upgrade free totMavericks, version 10.9
    After the upgrade to Mavericks iphoto does not working
    It is not supported by Mavericks.
    How can i get back my program iPhoto ( 9.2.3) in Mavericks?
    Thank you for an ( good) answer.

    Go to the App Store and upgrade it to the current version.

  • Blu-Ray Creator does not seem to work- has anyone used with success

    I just purchased Blu-Ray Creator from the app store and it will not let me backup a hardcopy Blu-Ray disk onto my hard drive. Has anyone bought it and got it to work?

    Hi abhi.p,
    Thank you very much for your kind reply.
    Yes, it does show the checkbox as checked if I use value="#{true}". However, it is checked permanently, user cannot uncheck it.
    That's why I used the bean variable "#{pageFlowScope.fullExpressionEditor.categorySel.selected}".
    The variable 'selected' is set to Boolean.TRUE in the bean. But in the UI the checkbox unchecked, strange!!
    Regards,
    -ab

  • Premiere Pro CS6 H264 Blu-ray encoder does not do MBAFF interlace

    I have been testing the Premiere Pro CS6 H264 Blu-ray encoder with some HDV video 1440x1080i25 top field first and I have found that it always encodes as PAFF even when the MBAFF box is ticked. I analysed the stream with h264_parse and found that the mb_adaptive_frame_field_flag is set to 0 and that the pic_struct flag alternates between 1 and 2. These indicate that the encoder is using PAFF when the MBAFF flag is ticked.
    The CS5 encoder does work as it sets the mb_adaptive_frame_field to 1 and the pic_struct to 3 which is correct for top field first.
    There is another problem in that Premier pro does not recognise field order of correctly encoded MBAFF video. It reports tff video as progresive and bff as top top field first.
    MBAFF generaly gives higher quality pictures.
    Regards Trevor

    For obvious reasons I do not like to be constanly connected to the internet with my Video Edting PC.
    There are no 'obvious' reasons not to stay connected (if you know what you're doing), and in fact very good reasons to do so (more so if you're a Creative Cloud subscriber).
    Having said that, there is a way to get the PDF to come up when you hit F1, instead of the online help.  I just don't recall where that setting is.

  • Burning does not work

    Everytime I attempt to burn a CD iTunes either does not burn the CD and responds with a message that says that the CD cannot be recognized (or something to that effect.)
    I followed the suggestions on the iTunes support page which included switching to "data-disc" and lowering the burn speed to 2x. After doing so, the CD did in fact burn, but now will not play on a single CD player. Is the problem the blank CDs, or something else? I've already ruined countless CDs attempting to burn the same playlist, and nothing has worked...Thanks.

    On a CD player the discs appear to be blank, but when put into my computer they show up on iTunes as having music on them.
    Oh. That's a different problem.
    Go to your iTunes preference file (iTunes Menu) and select Advanced>Burning. Audio CD ought to be checked. It sounds like you may have checked "MP3 CD" or "Data CD". MP3 can be read by the more recent Audio Players. "Data CD" cannot be read by Audio Players. Regardless, you want "audio Cd".
    Please post back with results.

  • Blu-Ray audio does not loop properly on simple menu

    I have authored a Blu-Ray disc using CS4 of Encore. Each menu is very simple: No motion elements. I have added a short clip of music to each (about 30 seconds). This is already transcoded AC3 audio (to ensure it matches the audio on the main movie(s)).
    When playing back in test mode, the menus play fine. However, on a PS3 (the only BD player I have), it plays a few seconds (up to 10 seconds) of the audio and then loops. The false loop point occurs at different times on each menu.
    The loop point on the menus is 0. The audio length is set to 30 seconds in the project and the menu is set to loop forever.
    Anyone else come across this?
    Thanks

    Seems that this is a bug (rather bad one, actually), but there is a work around of sorts.
    http://forums.adobe.com/message/2047349#2047349

  • SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

    Since updating to OSX Mavericks (10.9) My  USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
    It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
    This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
    My USB 2.0 card reader saved my life this time. It works totally fine.
    Is this a known problem? Are you guys working on it?

    Solved in this post here:
    https://discussions.apple.com/message/24016337#24016337

  • Call Of Duty LAN Servers does not work after installing Mavericks on my Mac Air, I need help!

    Hey everyone, I have some troubles making LAN servers on Call of Duty 4 and people can't join them after installing Mavericks on my Macbook Air. I need help!
    Thx!

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Time Machine does not work after installing mavericks

    After I installed maverick on my imac, my time machine backups don't work anymore!!!!
    I have a normal portable HDD attached to my Imac with time capsule backup from before mavericks was installed.
    I also has a Buffalo NAS as a second Time Machine Backup. 
    TIme capsule does not recognise my Buffalo NAS and tells me that it is not available.  It has previous backups from Mountain Lion for sure!
    My portable HDD keeps saying "Preparing for backup" for eternity.
    Please, APPLE, what is going on with mavericks?  Regretted upgrading.
    My backup is 31 days behind because of this!  Unacceptable!
    But what is strange is that I can connect to my portable HDD and Buffalo NAS as a drive.   What I have been doing is to copy and paste the important stuff into the drives.  But it really defeats the purpose of time machine, right?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

    Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday.  There are many positive features of the 8600 Plus that prompted me to purchase it...
    Modular Design
    Large legal sized Scanner
    Standard/Legal Paper Printer
    Copy
    E Print Capability
    High Yield / Affordable Toner Replacements
    Unfortunately, I discovered the Wireless network capability is less than desirable.  After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work.  If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
    HOWEVER, I did discover this solution.  If the unit is near your base computer, install it to your computer with a usb connection.  That allows you to have scanning and printing from that unit.  Then you can connect the unit through its ethernet connection to your router.  From there all computers can print within your network.  It's not the best way to connect a WIRELESS printer, but at least it works.
    I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked.  The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure.  I wasted an entire day of productivity attempting to make it work.  I'm posting this so you don't make the same mistake.  If you happen to know a verified solution, then I would welcome the information.  Best of luck!!!

    It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
    http://www.apple.com/support/bootcamp/
    I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

  • Swipe on trackpad does not work os x mavericks

    Since upgrading to Mavericks, the multi-touch swipes do not work.

    In the menu bar click on Go ( Hold down the Option key ) Library will appear. Click on it.
    In Library goto the Preferences folder.
    In the Preferences folder locate the files below and delete it.
    com.apple.AppleMultitouchTrackpad.plist
    After deleting it restart the computer and test.
    Hope this helps.

  • Using Ilife 11 shared imovie burning does not work

    The process gets stuck during burning and will not finish, stayed at 1 minute for 24 hours

    after applying the latest patches it seems to have corrected iteslf

Maybe you are looking for

  • Can I export solid objects into Illustrator / InDesign CS2 and maintain vector format

    Can Adobe 3D export solid objects in vector format into Illustrator or InDesign CS2 suite? I'm interested in taking solid 3D objects developed in Pro/E 2.0 and import from Adobe 3D into Adobe Illustrator & InDesign in vector format for page layout. I

  • Miro number range

    hi MM i am sd consultant i am doing incoming invoice in MIRO but as i enter the T Code i get a error Number range missing can i knw whr what is tcode tp create a number range for MIRO Regards Vinit

  • How to find out error segments in a group of Idocs

    Hi, 1. For every 5 minutes Idocs are coming in to R3 from some third party systems, and this scenerio some of the Idocs are in failed status as well. My doubt is how to see the all segments at a time, since there might be some problem with the data,

  • Jdev 11.1.1.4 install Problem

    Hi, I have an windows XP SP3 with 2 GO RAM and 35 Go disks and Jdevelopper don't installing ? Oracle installer begin running, then i see very quickly Jdev11 screen and nothing ! I have stopped Kapersky but without succes. Is there an log install file

  • Partial unmarshal question

    I have used the JAXB partial-unmarshal example to create my own code base for a >2gig XML file. Things are working well but I don't understand the issue of namespaceURI. Specifically, the XML file I am parsing contains namespace tags in its primary e