PIONEER DVD-RW DVR-K05 won't burn dvd+-r/w or cd-r

I've read a bunch of posts from people with similar problems and am concerned...brand new 20" imac with 2GB of RAM and following superdrive specs:
Model: PIONEER DVD-RW DVR-K05
Revision: Q523
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
I have tried many types of media and all have failed...used both burn folder and toast...burn folder has given me the following errors when burning to a Sony DVD+R media:
error code 0x80020022
and
error code 0x8002006D
get this error when burning to Maxell CD-R:
error code 0x8002006E
I've used these on my previous G4 with upgraded Pioneer Superdrive and had no problem. Is this a warranty issue?

reset the pram and nvram. tried burning from both toast and burn folder...more pricey dvd+r coasters.
created a new user and tried to burn from that. still nothing.
i have transferred 200 GB of data to this computer from my old one (which is severely damaged) and can't back it up now, without purchasing a whole new external drive, as i'm guessing i'll have to send this back...just throwing money away on this. thanks apple.

Similar Messages

Pioneer DVD-RW DVR-K05 superdrive can't erase or burn DVD-RW

I've noticed lots of users are having issues with their slot-loading superdrives and I'm wondering if anyone's issue matches this one:
I can successfully read and write: CD-R, CD-RW, DVD-R, DVD-DL and can READ an already burned DVD-RW, but I can't erase a DVD-RW that's already burned nor can I burn a blank DVD-RW. Inserting a blank DVD-RW results in ejecting the disc after about 30 seconds, no error messages, just ejects.
I've tried Maxell DVD-RW and Memorex DVD-RW. Same results.
An already burned DVD-RW (from a different burner) mounts fine on the desktop, but when I try to erase using Toast 7, I get the following message:
The drive reported an error:
Sense Key = ILLEGAL REQUEST
Sense Code = 0x30, 0x05
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
It recognizes that it's a DVD-RW, but treats it as though it were a DVD-R.
Using Disk Utility to erase results in a more generic error message:
Optical Erase failed with the error:
Optical Erase Failed
I had an online chat with an Apple rep who had me reset the PRAM, no change. Then we tried from another account, no change. Their next recommendation was to re-install the OS using Archive and Install, which I have my doubts about doing. Failing that, they recommend bringing the iMac in to a service store to possibly replace the drive. But based on what I've been reading about all the different superdrive problems users are having, I'm reluctant to even do that for fear of having an even worse problem with a different drive crop up at some point.
Has anyone out there had this exact problem and found a solution yet?
Seems like a simple firmware update for the drive could fix everything but I'm unable to find one.
Here's the drive specs from the Apple System Profiler:
PIONEER DVD-RW DVR-K05:
Firmware Revision: Q523
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No

hi there--
instead of just resetting pram i would try booting to
open firmware holding apple-option-o-f and then type
in the following commands--
reset-nvram (hit return)
set-defaults (hit return)
reset-all (hit return)
the last command restarts the computer. see if that
works. if it doesn't then try resetting the smu.
http://docs.info.apple.com/article.html?artnum=301733
there is a remote possibility that this is software
related, but it almost never is, and these things
are much more likely to resolve your problem than
doing an archive and install, and they are much less
hassle free. let me know if that works. [ 8 ) ]
OK, I booted into open firmware and did all the resets. No improvement. In fact, now I can't even mount some DVD-Rs that I had successfully burned before and mounted before. The drive has always been a little touchy with some discs, especially DVDs, but now seems to be even more hit-and-miss. CD-R and CD-RW reliably mount but DVDs have me worried. It took a long time for my OS X install disc to mount and display the window.
I think it may be time to take it in to Apple and replace it. I may also consider purchasing a Firewire burner with a tray!
Just wondering also if PatchBurn would fix this by creating a new profile or if this truly is a hardware issue. http://www.patchburn.de/
Thanks for your help.

The burn to the PIONEER DVD-RW DVR-K06A drive failed. Verifying the burned

I am trying to burn an album from iPhoto '09 and I receive the following error message:
The burn to the PIONEER DVD-RW DVR-K06A drive failed. Verifying the burned data failed.
I have attempted 3 different times using the same media that worked prior to my upgrade to Snow Leopard. Prior to the upgrade I didn't have any problems.
Any help would be appreciated.

Same for me here...no luck with TDK DL DVD +R. Seems that this drive is extremely picky with DL supports (http://discussions.apple.com/thread.jspa?threadID=1181990).

The burn to the PIONEER DVD-RW DVR-K06A drive failed?

I was wondering if anyone ever found a solution to this problem? This is the error message I get when I try to burn a DVD in iPhoto.
"The burn to the PIONEER DVD-RW DVR-K06A drive failed. The disc drive didn't respond properly and can't recover or retry."
I am trying to back up all my photos in iPhoto to DVD. I am using iPhoto 11 and I currently run Mac OS X 10.6.8. I made about 10 DVD copies earlier before this problem started without any problems. Now I get this message all the time. I tried burning a movie DVD in iDVD and it worked with no problem so I do not think the DVD burner is defective. Any suggestions would be appreciated. Thanks.

Same for me here...no luck with TDK DL DVD +R. Seems that this drive is extremely picky with DL supports (http://discussions.apple.com/thread.jspa?threadID=1181990).

Pioneer DVR-104 won't recognize/burn/eject disc. I am STUCK. Help?

Hello.
I bought an iMac G4 800mhz flat panel model with DVR-104 superdrive recently.
It's was working perfectly until I tired to burn my 1st disc using Toast 7 (DVD-R). That's when things started messing up. I stuck the disc in and after "thinking" about it for a minute ejected it without any message -- it just spit it out.
I repaired file permissions, restarted, tried another disc and now I can't get the disc out. When i push the eject button i get the eject icon on the screen but the disc doesn't come out.
-Under Disc Burning in System Profiler it now says "No burning device was found. If you are using an external device please make sure that it is connected and powered properly".
-Toast 7 says "no recorder found".
-When I restart the computer I get the message "Disk Insertion - the disk you inserted was not readable by this computer". Until I tried to burn a disc the drive had been working perfectly and a lot.
So to recap: There's a disc stuck in the Superdrive that my iMac doesn't think is there. Can I force eject?
Any ideas??
Thanks!!
Oh BTW here's what is says under System Profiler about the Pioneer DVR-104:
Model: PIONEER DVD-RW DVR-104
Revision: A216
Serial Number: BCDL160039WL
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Not Supported
PowerMac FW800 (G4), iMac G4 800 SuperDrive Mac OS X (10.4.6)

mrtotes thanks a lot for the suggestions! I didn't have to try the Target mode but I'll remember that one thanks.
With blank 8X DVD-R still stuck in iMac I ran Onyx (with everything in the Automation area checked√) and went to bed.
This morning I forgot it was in sleep mode & not turned off so I hit the power button to turn it on. It woke up, but the screen was frozen. I turned it off using the power button.
When I turned it back on the DVD in the drive started making that "clunk clunk" noise again trying to load (it had not been making any noises at all while stuck) while the computer was booting up. I held down the eject key & the mouse until it finished booting up. THE DISC CAME OUT. Whew!
I don't know if it was Onyx or me pushing the power button when it was asleep or that mouse/eject maneuver but it worked.
I guess I'll need to stick to 4X DVD-R for now if I can find any. Does anyone know where to get those now? I'm in Sacramento, CA.
Also, I have some Memorex 52X blank CDs. Do I dare try one of those or what speed should I use?
Thanks!!
PowerMac FW800 (G4), iMac G4 800 SuperDrive Mac OS X (10.4.6)
PowerMac FW800 (G4), iMac G4 800 SuperDrive Mac OS X (10.4.6)

Reasonably new PIONEER DVD-RW DVR-111D will NOT RECOGNIZE CD's

I bought a new PIONEER DVR-111D drive to replace my old superdrive about 5-6 months ago.
All was fine and good until about 2 weeks ago when it was suddenly unable to recognize CD's. Audio CD's, blank CD's, my highly valued "must insert to play" Halo CD, etc...
I noted this problem originally when trying to burn a playlist on a CD and Toast would pop out an error message about "Wrong Media Type". They worked fine before. This only happens on CD's (and yes, I tried a few different brands) - not DVD's.
DVD's (Dual Layer & -R & +R) read/write/burn fine.
But when I put a CD in the tray and close it, out spits out the disc (and I've tried several different types) about 20 seconds later.
I've tried every option I could find to fix this issue including...
http://www.macworld.com/forums/ubbthreads/showflat.php?Cat=0&Number=440595&Main= 439419
(trashing com.apple.kernelcaches, trashing Extensions.kextcache and when those suggestiosn didn't work, trashing ~Home/Library/Preferences/CD Info.cidb - all to no avail)
I've uninstalled and then reinstalled Patchburn. Didn't work.
I used Preferential Treatment to fix my User Prefs and System Prefs.
Doesn't help.
Now Toast hangs whenever I try and insert a CD while its running - but when I use Toast's "Recorder Settings" to identify the drive it says CD-RW Yes and CD-R Yes.
I really can't understand why this is happening. Isn't the laser that writes to DVD's the same as the one for CD's? If so, where is this "recognition" issue (can't recognize CD's but has no problem with DVD's) happening?
Here's the System Info for this drive:
PIONEER DVD-RW DVR-111D:
Manufacturer: PIONEER
Model: PIONEER DVD-RW DVR-111D
Revision: 1.23
Drive Type: CD-RW/DVD-RW
Disc Burning: Vendor Supported
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
I'd be very grateful for any help on this issue.
G4 - Quicksilver Mac OS X (10.3.9)

Hi-
There are two separate laser/laser lens for each of CD and DVD media. You could have lost the CD side. Could also be a blob of dust in the way.
Could try cleaning, or, try and get warranty replacement.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

EMac optical drive: Reads but ceased writing. I get "Sense key=MEDIUM ERROR, Sense Code=0x0C, WRITE ERROR. Drive is Pioneer DVD-RW DVR-127D.

eMac optical drive: reads fine but has ceased writing. One day it's working fine, burning DVDs, then after repeated attempts stops copying and gives the following error message: "Sense key=MEDIUM ERROR, Sense Code=0x0C, WRITE ERROR". Drive is Pioneer DVD-RW DVR-127D. Is this a software issue or is the drive half dead? Get the same result with either Popcorn or Toast 10.

Are you using Roxio Toast? That error seems to be discussed a lot in the Roxio forums. Scroll down this thread:
http://forums.support.roxio.com/topic/1686-the-drive-reported-an-error-sense-key medium-error-etc/
and you'll find a step-by-step troubleshooting scheme.

Need help with my Pioneer dvd-rw dvr-115d. HLEP!!

Hello i need help with my G4, i havent been useing it for a while and i started using it again. As i was trying to burn a DVD it didnt read my cd at all even if i put a DVD in there it dont read it just come right back out.. on my mac it shows that is there but not reading . what can i do????!!! i need help with this..
PIONEER DVD-RW DVR-115D:
Firmware Revision:          1.18
Interconnect:          ATAPI
Burn Support:          Yes (Vendor Supported Drive)
Profile Path:          /Library/DiscRecording/DeviceProfiles/PatchBurn-pioneerdvdrwdvr115d.drprof ile
Cache:          2000 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
this is what it say in the system profiler.
Power PC Mac os x 10.5.8

The new user account didn't work?
Or, the firmware flash didn't work?
I would try reconnecting the data ribbon. It is cramped and difficult to get to, but it may be some corrosion or a poor connection causing the issue.
It's worth a try, as the DVR-115 is a good drive. They don't make them any more........
You can find an optical drive installation video (on the following page) to help you with your efforts:
http://eshop.macsales.com/installvideos/

DVD / CD's won't burn in finder

SONY DVD RW DW-U10A
First: It doesn't acknowledge I've put a DVD in. Nothing. It keeps asking me to insert a disk.
Second: CD's won't burn in finder. They start for a couple of seconds and then they are rejected saying it's a "Power calibration area error 0x8002006D The device failed to calibrate the laser power level for this media."
- I can't find anything on that error code from Apple or Sony. I assume it can't read the disc for some reason and try a (2) cleaning discs. That didn't work.
- Disc utitilty says all my permissions are fine and I've got the disc space.
- I try different brands of discs - nope again (Sony, Maxell, Verbitim).
- Then I deleted the plist, rebooted. Not it either.
- Followed that with Onyx, deleted plist & rebooted again. Now I have to turn the power off to get it to reject. I can't delete 'untitled CD.fpbf' folder either.
- So then I try to burn a disc in ITunes and it works, but very slowly (4X).
- I figure the drive is starting to give out and just before I buy a new one, I sign into a guest account and guess what? It burns perfectly from finder and fast.
Now, why would a guest account make a difference?
I have no idea what to try next.
Thx for any suggestions.

replying to mandelinjo
no problem. happens to a number of folks (especially people used to the earlier versions of iTunes that didn't have so many diagnostics options.)
okay ... i'd like you to check in with Dell to confirm precisely which kind of Dell you have. there's updates available for the 2400 and the 2400C, and the updates for one may not be compatible with the updates for another. i don't want you to be installing incompatible updates.
these are the two different download areas:
Dimension 2400
Dimension 2400C
you also appear to have three different drives showing up on the same bus address:
IDE\DiskWDCWD800BB-75CAA0_____________________16.06V16, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STCD-ROM_GCR-8481B_______________1.06___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STCD-RW_GCE-8483B________________B105___, Bus Type ATA, Bus Address [1,0]
SCSI\CdRomVO0524SEYM602D________2.0B, Bus Type SCSI, Bus Address [0,0]
... so it might be worth investigating with Dell whether or not that could be an issue on the PC. (they would be the authority on shifting bus addresses on your model of PC, if that is what is called for.)

Cd/dvd drive won't burn a disc,although it will read a cd

i have a compaq cq62 with windows 7 home premium with the cd/dvd drive won't burn a disc,although it will read a cd

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive will now burn a disc.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it is now able to burn a disc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Pioneer DVD-RW DVR-K06 replacement drive needed

My iMac started having problem ejecting DVD/CDs and now the drive is damaged. I need to find a replacement drive (AppleCare expired). I know there are 2 possible types of superdrives were used on the late 2006 24" iMac. One is with a 12.7mm slot and the other one is 9.5mm. I am not sure which one I should get but here is my specs. I think the DVR-K0-6 is discontinued. Could someone tell me what replacement drive I can use? thx CK
Pioneer DVD-RW DVR-K06 Firmware: Q609 ATAPI
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Message was edited by: calvin ki

Hi calvin ki
You can get either new or refurbished OEM drive from WeLoveMacs
New Apple Original Part > http://www.welovemacs.com/6614391.html
Refurbished pulled from a working machine > http://www.welovemacs.com/6614391r.html
Or for way less $'s an External Drive > http://eshop.macsales.com/shop/firewire/optical-drives/
Dennis

Really hard to beleive but a new imac won't burn home movies on DVD?

Hi bite the bullet and bought a brand new imac (paid two times the price of a really nice PC) in hopes of owning a computer that would solve all my PC issues. Now that I have it at home I down loaded my family snow board trip from my camera and found out that it won't burn it to a DVD. What? Called tech support and yes it is true imac won't burn a DVD unless you buy ilife $49 and install it. Even the cheapest PC will burn a DVD this is really disappionting.I did see some free third party software and thought about trying it but I really hate to risk adding unauthorized software to my brand new computer. Is there hope on the way in the form of free update or is this what I get? Other than this I have enjoyed using it but this is really a major deficiency and a real disappointment.

I purchased the iLife 11 retail disk (I've seen it for as little as $25 at Amazon) because, in my opinion, there is no equivalent for iDVD's capabilities of adding pzazz to customizable menus/themes - taking your efforts from amateur to professional looking presentations.
And, it is somewhat disappointing since iMovie still has a link to send your movie to iDVD and the idea of being able to produce movies including making DVDs is now being "replaced" by trying to get you to post all your content online (in the cloud). For anyone concerned with their privacy, that is not an option; neither is it for people who may not even have a computer, but would love to be able to see the event they participated in on their TV.
I'd buy the iLife suite and also send feedback to Apple:
http://www.apple.com/feedback/idvd.html

External Drive won't burn DVD's

I have a Sony external DVD/CD burner attached to my G4 it is capable of burning all formats of DVD and CD. The System Profiler recognises it and tells me all the formats it will burn.
However when I put a blank DVD-R in to burn a disc image, it won't burn and it tells me it can't burn to this disc and to insert recordable media.
It's not the DVD's as they burn with no problems in my other G4, either disc image, iDVD, Toast etc though this one has a superdive.
Any thoughts on this?

Hi
What interface are you using to connect it?
That error code in Tiger is often related to the Finder, relaunching the Finder can fix it. In Panther though, I don't know if the same is true, can't hurt to try, however.
If you just purchased it, I would strongly recommend returning it for a drive from a vendor with a higher standard of Mac-support, such as LaCie, or a vendor such as OWC, that sells a variety of cased-drives.

IMac5,7 running 10.6.7 won't burn DVD's

Reads DVD's, reads and burns CD's but I get a communication error when attempting to burn a DVD. Tried multiple media. Tried cleaning disk. Tried to burn data and movie DVD's at various speeds without success. The disk has the tiniest sliver burned onto it and then ejects. On movie disks, it will actually play the menu and start to play the movie but then stops moments into the movie. Data disks leave an "Untitled DVD" icon in the "Places" sidebark in Finder. I can't get rid of these unless I clean up ~/Library/Preferencescom.apple.sidebarlists.plist. Already attempted https://discussions.apple.com/message/11790618#11790618
Any would be greatly appreciated.
Thank you.
Al

Thanks Dr. Smoke,
I will look into purchasing a new set of DVD's in -R & -RW and try my fate at burning them tomorrow. I will let you know how I make out.
I do have an unrelated question for you if you care to answer it. I use Retropect to back up everything and since they sold off to EMC, I really have not been all that thrilled with their performance. Would you recommend another application that is better?
Daniel
Hi, Daniel. Welcome to the Discussions.
1.Your DVR-104 will not burn DVD+R or +RW
media since those aren't supported by that optical
drive. It supports DVD-R/-RW as noted here:
DVD-Write: -R,
-RW
So, if you've only DVD+R/RW media on hand, that may
explain the problem.
2. What is the exact text of any error messages or
alert dialogs that are displayed when you insert a
suitable, blank DVD.
3. Immediately after the problem occurs, again
assuming DVD-R/RW, check the ends of t
hese Console logs for clues.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above
is freely available. However, because I own The X
Lab™, a commercial Web site to which some of these
links point, the Apple Discussions Ter
ms of Use require I include the following
disclosure statement with this post:
I may receive some form of compensation, financial or
otherwise, from my recommendation or link.

Cannot use Pioneer DVD k16a to burn DVDs on Satellite Pro A

Hi every1
I got Toshiba laptop using Pioneer DVD k16a
The thing is, while Im trying to burn DVD system does not recognize it.
I can burn CDs.
Been trying to update driver and reset DMA but nothing helped.
Has any1 familiar with this issue?
Thx for your time.

> I would remove driver but I cant seem to find a back up one.
R2D2 said Remove the CD/DVD drive from the device manger
He means not driver but drive ODD (Optical Disk Drive)
Access the device manager (control panel -> system -> Hardware), mark the CD/DVD drive and press delete.
Then access the registry editor typing regedit in RUN window
Then choose the key posted above and remove the upper and lower filters values.
Finally reboot the notebook.
I hope this explanation would help you because I dont know how to explain it more detailed

PIONEER DVD-RW DVR-K05 won't burn dvd+-r/w or cd-r

Similar Messages

Maybe you are looking for