Pioneer DVR 106D does not work after firmware update

I tried to update the firmware of my iMac with DVRFlashX. I failed. No Superdrive is showing up in the system information. DVD can't be removed even with the firmware eject function. No Pioneer drive is found. How do I get the right firmware for the Superdive via Internet to make it work again?

Hallo und Willkommen zu den Apple Diskussionen.
Thanks for taking the time to let us know what happened. I assume this Firmware wasn't supplied by Apple... What updates does it achieve?
many thanks
mrtotes

Similar Messages

Cisco WS-2960S-48TS-L does not work after firmware update

Hello.
After purchasing the Cisco WS-2960S-48TS-L decided to do a firmware upgrade using the CISCO NETWORK ASSISTANT. Unfortunately update failed. Currently the switch when you run can not load the system image.
Since up to now I had to deal with the other switches do not really know how to upload the correct image now. The more that you connect the switch through the console acts as to a limited extent.
Please help

Thank you Leo Laohoo.
Your suggestion to usbflash0 helpful.
It is true that I was struggling because of usbflash latest iso system also did not want to go, but I recorded version of one lower and went.
By the way, I learned that the USB must be formatted to FAT file system.
Again, thank you for your help.
Darek Rynkowski

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

HT1192 caps lock function does not work after latest update

Hi there,
I have a Macbook 13" Early 2011 and recently after updating my operating system to Mac OS X 10.7.4, i have found that the caps lock button isn't functioning.
At present if i hold or press the button, it is failing to light up or function at all.
Is there a fix for this issue, as i have read that there was an update by Apple to stop accidental pressing of this key, however not being able to access its function at all seems to be unusual.
Your thoughts and opinions would be much appreciated,
Thanks,
Robsterhill101

My Macbook Pro Early 2011 15" (base model) did this to me last night.
I did a PRAM Reset, the generic "Cure All Procedure" for Macs. It worked after, but I noticed that the button had to be pressed at just the right angle and with enough pressure. The light would come on and off and Caps Lock functions properly. Continued as normal.
I put the computer to sleep by simply closing the lid, and then put myself to sleep as well.
This morning, just before I came on here, my computer would NOT wake from sleep (a whole other issue). Would not wake up by pressing the power button. So I had to do a hard reset, hold the power button down, and press it again after...grrr I never feel good being forced to do this.
Anyways long story a little bit shorter, I restarted my computer and low-and-behold the Cap Lock is not working again. No Bueno, Cupertino.
No, sorry, no liquid damage on the keys, and I don't have kids, nor share my computer with anyone but myself.
Its one of the few things that bug me about this computer. The other is the issue of the computer not being able to wake from sleep. Too often.
SHOULDA BOUGHT THE APPLE CARE
Simply Because, perfect timing after the years original warranty, you will experience problems. After all, they do want you to be a repeat customer. IYKWIM

MacBook Pro Late 2011 Model - Does not work after Yosemite update

i recently updated my OS to Yosemite and had in problems for two days but yesterday it ceased to work in the middle of printing a document.
I need my laptop back up and running since I have school exams soon and vital information and files are in this laptop.
i Have never had a problem with the laptop before.
Issues that I have had
logging in takes at least 20 minutes
cannot progress further than that, desktop is blank and nothing loads, only the dock.
battery drains extremely fast
Safe boot does not even load
I've tried clearing that VRAM and the other one.
Cannot access anything at all
This is appalling and at the worst possible time.

Please describe exactly what you're doing and what happens.

Security not working after firmware update

I have a WRT610N (v2) router and I recently updated the firmware to the most current version 2.00.01 build 15. I can no longer set WPA2 security for both bands (used to work just fine). Every time I try to save settings for WPA2 for the 5 GHz band, it tells me it was successful but then displays that the security mode is disabled (and it shows up on my computers list as not having any security enabled. Is there a fix for this? If not, where can I get a copy of the old firmware that worked?

I'm on a Mac (normally) and have tried Chrome & Safari and then run Win7 via bootcamp and have tried IE. No change. None work. I also tried the reset again (hold down the reset button for 45 seconds) and start from scratch to reconfigure - that didn't work either.
Still can only P/W protect 1 of the 2 bands using WPA2 personal. Each band has a different name and I've tried the same P/W or require different P/W, neither works.
One update though. If I set one band to WPA2-AES and the other band to AES, it works. But not if both are set to the same encryption scheme.

Headset does not work after latest update...

It is very "strange" that since the latest system update on my Z3 compact my headset is not working at all. I use my all time favourite iphone 4 headset. It worked flawlessly before the update but now if I plug it in, the phone is not recognizing it at all and the walkman still plays on the phone speakers. Before the update I could listen to music, use it for making calls and so on. Since the update, nothing is working. My headset is working fibe by the way, so it is not a hardware fault. Works like a charm with other phones, and on the top of that if I use the app Soundabout the music works with the headset but the calls are still not using my headset. Do not tell me to use the sony headset which was in the package because I hate it. Has poor audio quality, falling out of my ears constantly and the cable is everything but not flexible. So it is a shame that I need to use an app to get my headset work on my new phone...

I understand you don't want to use the bundled headset, however for troubleshooting purposes can you please test it and let us know if it works.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My sound device does not work after yesterdays update

after the last update my sound device is out of system.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Phone not working after firmware update for nokia ...

I tried updating my nokia 5800 today when the new firmware was released. i have already updated my other phone including another 5800. But when I updated the firmware of another 5800 (my 5800 through nokia software updater from pc/laptop), after the nokia updater application said that the update was successful, my phone showed the nokia logo with the new firmware version. It's supposed to reboot automatically and continue as normal but after waiting for like 15 minutes, my phone's still not turning on and still showed on the screen that the phone was not connected. That's when I unplugged it off from the USB cable and tried to turn it on, but it will just vibrate for a few seconds and then nothing! It won't turn on or work! I've tried to search on how to fix this problem but to no avail.. please help me.. is my phone going to work again?
Solved!
Go to Solution.

There's a section in this forum called the "Pool of Knowledge". Have you followed the instructions in this post in the PoK?
/discussions/board/message?board.id=topfaq&thread.id=112
Message Edited by grschinon on 02-Nov-2009 06:05 PM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

IPhone 4 - Pioneer Speaker System No Longer Works After Firmware Update

To Whom It May Concern,
I recently updated the firmware on my iPhone 4 from 4.1 to 4.2.1. Unfortunately, as soon as I did that my Pioneer (XW-NAV1K-K) Speaker System no longer works with my iPhone. Are there plans on correcting this in the next firmware?

Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
Your or anyones HELP! is greatly appreciated!

Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

As subject title, did a recent Lenovo "System Update" on BIOS and other drivers, and since then sleep and hibernate no longer works, when i close the lid, it turns on by itself after 2 seconds.
When i select Sleep or Hibernate in Windows 8.1 with lid open, it just behaves like a Restart command.
Need this fixed! Any ideas?

Try downgrading to your older BIOS and see if it works again.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Scanner samsung scx-4300 does not work after software update v 2.3

hi everybody,
i just noticed that after i run software update on my mac mini and install samsung printer software update v2.3
I'm no longer able to scan from my Samsung SCX-4300
on macbook pro i noticed the software update has not been installed, and i can still scan without any problem
is there a way to uninstall the software update?
thanks.

What's the correct way to uninstall SamsungPrinterSoftwareUpdate v.2.3
If I delete the following:
- Samsung folder in /Libraries/Printers/
- Samsung Scanner.app in /Library/Image Capture/Devices
Will it remove samsung driver for printer and scanner?
If yes, then I can reinstall SamsungPrinterSoftwareUpdate v2.2 (found in on the internet from google search)
note: confirmed the problem is with SamsungPrinterSoftwareUpdate v2.3

Apple TV does not work after software update

After being prompted and loading (I think) the newest ATV update all I have on my TV screen is the iTunes icon and underneath that an icon of a USB cable icon. When the power is plugged in the ATV status light blinks continuously. Please not my home share is turned on. What can be done to troubleshoot and solve this problem?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.

Tecra A2: display brightness Fn F6+F7 does not work after BIOS update

Updated bios to 1.40 WIN at end of January. Since then F6 & F7 keys fail to increase or decrease screen brightness. Is this a coincidence or is the bios update the culprit!!??

Hi
Usually the BIOS update shouldn't have any bad influence on the Toshiba drivers and the OS performance.
There must be another reason for the FN key malfunction.
At first I would suggest to reinstall the common modules. Please check if it will help.

Card slot does not work after update (14/10/2011)

Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Pioneer DVR 106D does not work after firmware update

Similar Messages

Maybe you are looking for