Pioneer NEX for CarPlay, what's needed?

I just got a 2015 Honda Civic EX coupe and am very discouraged that Honda has delayed CarPlay to the point where I'm wondering if it will be released at all. If that is the case, I will obviously need a Pioneer NEX model (the Alpine apparently only supports one camera). However, I am apparently forced to buy two new cameras because the Honda cameras aren't compatible with the Pioneer NEX units. Well, now I'm wondering in the Pioneer cameras will even fit in the Civic. It appears as though the rear one will, but I'm very unsure of the one built in the passenger side rear view mirror. Can anyone tell me if this is workable, or do I need to wait for either Honda to actually release CarPlay or a different 3rd party head unit other than Pioneer or Alpine?
Many thanks,
Jim

Peter,
I really don't see the need for you to be rude. I have in no way been so to you. I have already explained why I didn't think Honda (or Pioneer for that matter) would be a very helpful place to go. I also did clarify in my last post that I was also looking for "any CarPlay information in general, in addition to the camera question". Since this is an Apple forum, it makes sense to me to ask about it here (at least in my opinion) because Apple is the creator of CarPlay. Technical support forum or chat forum difference aside, I still had questions that I thought someone might be kind enough to try to answer. This is after all called the "Apple Support Communities", and at least some of the information I was trying to gather was about an Apple product (CarPlay). So, I do apologize if you found my post offensive, or if you were simply annoyed with where I posted my questions. I did not intend to irritate you. I hope your day gets better.
Jim

Similar Messages

Cannot delete the checkbox for Master Password - desktop synced with mobile device - is the password for that what is needed on the desktop?

Re-installed Firefox 4 recently after initial problems with Rapport software. Now get a box to enter a master password to proceed - just close it but it is annoying. Visited Options and under Security unchecked the Master Password box but another warning box appears and when this is closed the Master Password box is re-checked. I have never created a Master Password. My desktop is synced with my mobile device and I have a password for that - is this the master password? If not, what other options are there for stopping this box appearing when Firefox is activated?

The name and password for Firefox Sync and the Sync key are stored in the Password Manager.<br />
So if you use Sync then you will get a Master Password prompt the first time that Sync wants to connect to the Sync server.

Web Dynpro Java timesheet to Web Dynpro ABAP timesheet what changes needs to be done from EP side

Hi All,
We are moving Web Dynpro Java timesheet to Web Dynpro ABAP timesheet.
what changes needs to be done from EP side?
I have made Web Dynpro ABAP iView calling Web Dynpro ABAP timesheet and linked it with page.
But It is showing an error 'Web Dynpro Application CATDATARECORD does not exist'.
Please suggest what other changes needs to be done.

Hi Anurag,
I have added new Web Dynpro ABAP iView to the same page in which Web Dynpro JAVA iview was added and made ABAP iview visible.
And this page is already assigned to role.
How should I link this ABAP iview so that it get replace by the Web Dynpro JAVA iview.
And the application name (CATDATARECORD) is correct and Web Dynpro JAVA is using the same application.
But now we want new time timesheet for that what changes needs to be done?
Please suggest.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David

Going between apps they continue to reset. I can no longer do what I need my iphone for.

Going between apps they continue to reset. I can no longer do what I need my iphone for. I've looked for a solution and haven't found one. This seems to be a gigantic blunder in the latest evolution of iOS. I used to love iphone but now it's like a curse. Thanks for any help you can give.

Can you be more specific? What does "going between apps they continue to reset" mean?

Got the following message when trying to install Photoshop CC "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." I use Windows Vista so not sure what I need to

Hi there
I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.

Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
System requirements | Photoshop

What technology that can be used for the creation of Need Definition?

Being on SAP SRM 4.0, we currently have a requirement for creation of Need Definition( Basically a build up for the contract ). Need being collected from the Backend systems need to be validated and approved by Buyers & Lead Buyers in the SRM system.
Technically, this task is broken down to below tasks.
1) Creation of need definition screen - Basically a template where a need can be created with Items, Sub Items and other related information
2) Selection Screen for Buyers and Lead Buyers - This enables the the Buyers to select the Need Definition assigned to them based on the status.
3) Report - List of all the Need Definition( Item and Sub Item)satisfying the selection of step 2. with the possibility to navigate to the Need Definition screen ( Step 1) upon selection.
Now the question is,
what technology is recommended for the above Tasks? We thought it would be BSP but do you guys have any suggestions...
Do we have any issues in displaying the report in BSP? please let me know
Remember we are version 4.0 of SRM.
Thanks in Advance..
Mohan.

You can use conditional styles to address specific browser issues (this is more than likely the markup you noticed).
Here's a good guide:
http://www.quirksmode.org/css/condcom.html

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package.

HT3014 my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.

my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.
my laptop is a 2008 model

Hmmm... 2008 MBP has...
Video (Monitor): 1 (DVI)
Details: Supports external display in dual display and mirroring modes. VGA output provided by included Apple DVI-to-VGA adapter, S-video output provided by optional adapter (sold separately).
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .5-15-early-2008-penryn-specs.html

I keep getting the message"an error occurred while trying to access the service". does anyone know what i need to do to resolve this problem. I am trying to convert apdf file for msword?

I keep getting the message"an error occurred while trying to access the service". does anyone know what i need to do to resolve this problem. I am trying to convert a PDF file for ms word?

Adobe Reader is free; but you may have paid for the ExportPDF service.
Contact Adobe Customer Care and click on the Still need help? button to chat with an agent.
[topic moved to ExportPDF forum]

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

Need to know What I need to do for basic performance

I have windows 8.1
I7 64bit processor
16 gig bite ram
hd4600 intel graphic driver (internal)
My problem I can not work lightroom and photoshop together for more than 5mins.
Photoshop - open cl is no longer available.
Waacom tablet (I use tablet 20 percent and mouse 80 percent)
I am constantly running into drag and waiting....
What or where is my problem....
I need to be able to operate lr and ps seamlessly for 4 or 5 hours at a time.
I don't feel with the system I have...I should be having this problem.
The one thing is: this is a desktop with two monitors. yet photshop has removed the photoshop ext and replaced it with the photoshop cc. Which is frustrating in itself... no reason or rhyme...one morning I wake up and
I have the cc. I was told it would perform better. It doesn't...and it has less features...
I need to know where is the bottleneck and what I need to do to fix.
I know I could have a better graphic card. Which I don't mind replacing...but I do not want to replace it and find out I did not need to do so and still have the bottlenect problem.
Does anybody have any ideas?

I was reading through your post assuming you are using a laptop. Your system as a whole sounds easily up to running Photoshop and Lightroom with no wait states, but you are not helping yourself using on-board graphics. It's not as if you would need to spend serious money on a turbo-nutter gaming GPU, but something half reasonable with a Gb of video RAM would make a difference.
But even taking into account your lack of a decent GPU, I would not expect the delays you describe.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
Just a thought, have you tried unplugging your tablet? ISTR Wacom related delays, but I thought that was with Mac systems. Worth a try though.

What I need to create and publish a magazine for iOS and Android?

Hi!
I would like to know what I need to design, create and publish a magazine for iOS and Android. I would also like to know what products I need, what price would you pay and what process I have to follow to carry out this work.
Thanks in advance!

It is NOT possible to create a Single Edition app for Android. Single Edition apps work only on the iPad.
You can create Single Edition apps using any account—CC, Pro, or Enterprise—and if you cancel your DPS subscription, these Single Edition (or single-folio) apps are still available in the App Store as long as you maintain your iOS account with Apple.
For multi-folio apps, the app container is downloaded from an app store, but the folios are downloaded from the Adobe Distribution Service. If you cancel your DPS subscription, the Adobe Distribution Service basically shuts down for that app. New users can still download your apps from an app store, but the library will be empty. Existing users can still view the folios they've downloaded, but they can't get any updates or new folios.

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

We are trying to determine why alert boxes are not modal
The fix states it's for Firefox 2.0 - 3.7a1pre
We are using 3.0.6 not the current version of 3.6.13.
Add-on release notes 2.16.1
https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
with respect to the window/dialog that issued the alert.

Pioneer NEX for CarPlay, what's needed?

Similar Messages

Maybe you are looking for