Pioneer XW-SMA4-K

Hello!
So I've just bought myself a Pioneer A4 (XWSMAK4) which sounds great, works beautifully with Windows 8 'Play To' from within WMP/explorer and Airplay is dead easy.
http://www.pioneer.com.au/au/products/42/202/227/XW-SMA4-K/page.html
What I want to do however, is see if I can connect to it directly from my WP8 (Lumia 920) and stream to it. It says it supports 'direct connect' WiFi which I figure should do the trick.
I installed the Play To app (beta) from Nokia which can see it, but can't connect to it for some reason.
If anyone know of any other apps or why I might be having trouble, I'd love some assistance and advice.

Wi-Fi Direct is a feature request …
Although I wonder what they actually do, because the Pioneer XW-SMA4 is not certified for Wi-Fi Direct. Nevertheless, I guess they do the same and are just not certified and therefore they use this ‘Wireless Direct’. I love consumer electronics and their documentation. You have a DLNA Digital Media Renderer (DMR; Certificate) which should do. Is your Pioneer XW-SMA4 connected to your LAN by wire? If your Nokia Lumia is connected to your WLAN, it should see the Pioneer, or not? or is your Pioneer connected to your LAN by WLAN?

Similar Messages

Airplay problems only with some wired airplay devices

I am using a Pioneer XW-SMA4 and an Apple TV, both wired to the LAN, as Airplay Speakers.
The Pioneer XW-SMA4 as well as the Apple TV have fixed IP addresses whereas only the Pioneer speaker is setup for sleep mode, the Apple TV is constantly on.
My iTunes on a Windows 7 PC (LAN) shows always both devices being available (even though Pioneer may appear offline/sleep) but my iPod touch 5G (WLAN) will only show the Apple TV. The Pioneer will only show up when I reset the internet connection completely and will go away after some time of non-usage.
How can I setup my iPod touch so that the Pioneer as recognized as being a permanent, fixed IP Airplay device that will autostart as soon as I sent a stream?
WLAN: b/g/n using WPA/WPA2
Thanks for your support!

Have yo contacted Pioneer/went to theri support site?

Airplay to Pioneer receiver no longer works after 10.4 update

I have a VSX-1021K receiver unit which until yesterday, I used quite frequently with iTunes' airplay function. Then, I installed iTunes 10.4 on my Windows 7 computer (32 bit) and suddenly, airplay does not work.
iTunes can still see the VSX-1021 unit and it shows up, but then when I try to play music to it, it fails with the following error:
"An error occurred while connecting to the airplay device "VSX-1021" An unknown error occurred (-15000)."
Meanwhile, the screen on the A/V unit shows "No Title" while it's in Airplay mode. Normally it would display the track information.
I've already emailed this exact question to Pioneer support, and will follow up here with anything I hear back from them. It's possible they might need to update the firmware of the receiver to support protocol changes created in 10.4
Note: I love that iTunes has finally added Aero effects support for Windows 7 (and Vista, I can only assume), only 1.5 years late to the party. But at least it's there. Sweet GUI effects.

Note: issue can be worked around by disabling the Windows Firewall. Interestingly enough, reenabling the Firewall after Airplay is already playing also does not cause problems; the music keeps playing without issue with iTunes 10.4 - but if I revert playback to 'internal speakers' and then back again to the receiver, the errors begin again.
So, that leads me to believe that the Windows Firewall (and OSX firewall, since I've seen similar threads on the mac side of things) is blocking the network protocol/port that allows authentication with the Airplay device, but once connection occurs, that protocol is not used again.
I've spoken with Apple phone support (thank goodness my work gave me a Mac laptop with a warrantied serial number I could use on them) about this, and have been told it's been forwarded to the iTunes programmers. Hopefully we'll see a patch soon, so I don't need to keep my firewall disabled!

IPhone no longer works with Pioneer AVIC-D3 car stereo after recent update

I've used my first gen iPhone with the iPod adapter/cable from my Pioneer AVIC-D3 since I first got it - and it's worked great. But after the recent update it doesn't work. I only get an "Error-11" message on the stereo screen when I plug the phone in. Anyone? This is really frustrating!
Thanks.

Nevermind. Did a hard reset of each and they work now. Odd...

Pioneer DVR 106D does not work after firmware update

I tried to update the firmware of my iMac with DVRFlashX. I failed. No Superdrive is showing up in the system information. DVD can't be removed even with the firmware eject function. No Pioneer drive is found. How do I get the right firmware for the Superdive via Internet to make it work again?

Hallo und Willkommen zu den Apple Diskussionen.
Thanks for taking the time to let us know what happened. I assume this Firmware wasn't supplied by Apple... What updates does it achieve?
many thanks
mrtotes

New Pioneer DVR-110 installed, "patchburned", BUT drive won't stay closed.

Have had some good advice on how to intall a new DVD/CD drive, but after installing a New Pioneer DVR-110 (I thought succesfully) on my G4, and downloading Patchburn for Panther, the DVD drive now won't function as the computer keeps ejecting or opening the drive tray.
After installing the drive, I installed Patchburn, and Toast did recognize the drive. I then tried to verify disc permissions on the computer and it kept getting hung up during repair/verify saying it lost connection with the drive manager. Tried Onyx to repair/verify permissions and it too gets hung up. (Had to force quit)
Any advice on how to get the drawer of the DVD drive to stay closed and what else I need to do to get it working?... Alas I can not even reinstall my original OSX software now as I can't boot from the disc drive since it won't stay closed.
Thanks, Rob
G-4 Quicksilver Mac OS X (10.3.9)

You can verify the closeness by opening the empty drive door with the KB and then hold the door open and close drawer with the KB.

Reasonably new PIONEER DVD-RW DVR-111D will NOT RECOGNIZE CD's

I bought a new PIONEER DVR-111D drive to replace my old superdrive about 5-6 months ago.
All was fine and good until about 2 weeks ago when it was suddenly unable to recognize CD's. Audio CD's, blank CD's, my highly valued "must insert to play" Halo CD, etc...
I noted this problem originally when trying to burn a playlist on a CD and Toast would pop out an error message about "Wrong Media Type". They worked fine before. This only happens on CD's (and yes, I tried a few different brands) - not DVD's.
DVD's (Dual Layer & -R & +R) read/write/burn fine.
But when I put a CD in the tray and close it, out spits out the disc (and I've tried several different types) about 20 seconds later.
I've tried every option I could find to fix this issue including...
http://www.macworld.com/forums/ubbthreads/showflat.php?Cat=0&Number=440595&Main= 439419
(trashing com.apple.kernelcaches, trashing Extensions.kextcache and when those suggestiosn didn't work, trashing ~Home/Library/Preferences/CD Info.cidb - all to no avail)
I've uninstalled and then reinstalled Patchburn. Didn't work.
I used Preferential Treatment to fix my User Prefs and System Prefs.
Doesn't help.
Now Toast hangs whenever I try and insert a CD while its running - but when I use Toast's "Recorder Settings" to identify the drive it says CD-RW Yes and CD-R Yes.
I really can't understand why this is happening. Isn't the laser that writes to DVD's the same as the one for CD's? If so, where is this "recognition" issue (can't recognize CD's but has no problem with DVD's) happening?
Here's the System Info for this drive:
PIONEER DVD-RW DVR-111D:
Manufacturer: PIONEER
Model: PIONEER DVD-RW DVR-111D
Revision: 1.23
Drive Type: CD-RW/DVD-RW
Disc Burning: Vendor Supported
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
I'd be very grateful for any help on this issue.
G4 - Quicksilver Mac OS X (10.3.9)

Hi-
There are two separate laser/laser lens for each of CD and DVD media. You could have lost the CD side. Could also be a blob of dust in the way.
Could try cleaning, or, try and get warranty replacement.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

New Pioneer DVD drive not recognized in profiler

I have used these forums many times to solve my problems so a big thanks to everyone who contributes. I've never had to actually ask a specific questions until now so here goes....
I have an e-mac running 10.3.9. My superdrive started to get flakey (not recognizing some DVD's, spitting them out, etc.). I followed all the advice here but no luck so I finally replaced the original drive with a Pioneer DVR-118. My problems still exist and the system profiler is telling me I have a Pioneer DVR-106. Did I do something wrong on the install? Shouldn't the profiler recognize the new drive?
A big thank you to anyone who can help me through this.

Since your computer's Apple Hardware Test is on a disc and the built-in optical
drive won't work, you may have to see if an external optical drive capable of
being used as a boot, is available. This of course would be a FireWire combo
type drive that can read & write DVD & CD media and boot Macs.
You may have to see if you can archive anything worth saving from that eMac
and put it on media via another computer; if the eMac can be booted into
Target Disk Mode where it is seen by another computer as a FireWire drive.
In fact, you could see (in a reverse scenario, perhaps?) if another computer's
optical drive could be used by your eMac, if a second healthy computer is
available & then boot it into FireWire Target Disk Mode to see if you can use
the optical drive in there as though it were a peripheral. - This may not work.
I've not had to really use FireWire Target Disk Mode, but do have cables,
and an externally enclosed LaCie FW HDD which is partitioned for clones.
There are times where a FireWire externally enclosed superdrive is handy.
There may be some damage on the logic board or some circuit that does the
controlling of ATA devices on one of the buses in the computer. That would
be a possible cause of the issue. If the identity of this drive can be changed
by the user before it is installed, be sure that is set correctly for use in eMacs.
{The three eMacs I've owned, had issues early on and I got rid of them in mere
days of first purchase; at considerable distance and effort by me. Then I got
an iMac which was an unholy terror to debug after an 'authorized service' ctr
did their best to kill logic boards and sell me defective store-brand RAM they
were authorized to install in a place I was not. ThreeThousand Miles and Six
Months later, I finally got my iMac back, repaired. Only because Apple told
them to read my test notes - & just install the parts I said it originally needed.}
Do you have a second Mac nearby (presuming yes, and using it online) which
may be used to attempta further diagnostic or testing of the eMac?
Not sure if an Apple Hardware Test would be sufficient to tell the issues in
your computer; if you have a way to make use of it via external FW. Hope-
fully someone with more extensive eMac and drive experience will advise.
Good luck & happy computing!

How to connect apple tv 2 to pioneer pdp s35

How do I connect apple tv 2 to pioneer pdp.s35 tv? I connected to one of my pioneer receiver's hdmi ports but when I cycle through the inputs I can't find apple tv. Thanks.

Welcome to the Apple Community.
I don't have or indeed know anything about your receiver, but unless the Apple TV can see an active device and connect via HDMI it won't turn on. You will need to set your receiver to use the correct input and then turn on the Apple TV.

Help needed to track down Problem in tiger with Pioneer DVR-110D

ok as i stated in another topic i own a Beige G3 AIO that is running OS 9.2.2 and OS X 10.4.8 and i have done allot to this system to get it to run faster and to run properly.
part of this setup has a Pioneer DVR-110D it there and when i bought it i was running OS 9.2.2 only. at first i could not burn anything with it cause it wasn't supported and when i went to put the system to sleep it would freeze when i would wake it up it never did this before i installed the drive so i knew what was causing it.
i turned off HDD sleep and the problem was fixed. but i didn't like the ideal of having the hdd running all the time when idle. me and a friend was talking about optical drive issues and he said he found this driver replacement for the apple cd/dvd driver called intech speed tool's 6.0 for OS 9.2.2 and that i should give it a try cause it fixed a few problems for him.
i downloaded the demo of it and installed it and i turned on hdd sleep and put the system to sleep and woke it back up and the system was running great. so now the wake up freeze problem was cured. but still no burn support. so after a few weeks of posting on here about the problem some one came by and said he knew what the problem was and sent me a modded PioneerCDR authoring support extension. i installed it and rebooted and opened iTunes and iTunes showed Pioneer DVR-110D as the devise to burn to. so i tryed it and behold it burned a audio cd with no problems.
later i bought a western digital SE 120gb hdd and installed it and partitioned it 3 times a 8gb first partition for OS X a second partition 10gb for OS 9.2.2 and the 3rd partition was the rest of the drives size for shared data and storage. the hdd worked great with no issues so it was time to try OS X on this system cause i was waiting to get a large HDD to do so.
i figured that the Pioneer drive would not boot the OS X jaguar cd and is a known problem with non apple cd rom drives. so i took out the Pioneer and reinstalled the apple 24x stock cd rom drive. and the jag install cd booted without a hitch. Jag installed and was running so i updated to 10.2.8 and found out the internal screen kept going out and locking the system up. so i searched this forum for the onboard video blackout and came across the terminal work around to get the system to behave itself with having more than 192mb ram installed. i rebooted and all went fine afterward.
i reinstalled the Pioneer drive and went to testing it all was fine everything mounted on the desktop that i put in the drive. but i lacked the ability to burn with the drive cause still the drive wasn't supported be the system so i searched the forum and came across the program called patchburn. i downloaded it and ran it and patched the driver to support iApps burning with this drive. so i put in a blank cd and went to burn in iTunes it burned flawlessly so i tryed a dvd-r with the finder it to burned flawlessly.
o loved playing a game planeshift and then they stopped supporting 10.2.8 so i went to buy the tiger install cd's. i already knew the Beige G3 was not a supported version of Os X on this system and you had to use xpostfacto 4 to install tiger on this system. so i did what i had to do to install tiger on the system and selected use old NDRV and selected to install tiger. which installed some files to boot tiger and rebooted yet again the Pionner drive refused to boot the install cd's . i got mad and held down the command option power key's for about 10 seconds and let off. the tiger installer booted and got to where it started to copy the files to the hdd and stalled out and the drive spun down never to spin back up or show signs of life so i powered down the system and removed the pioneer drive and put the stock 24x cdrom in and installed tiger.
after tiger was installed i shut down the system and installed the pioneer drive. and powered back on and it was in verbose mode showing what was going on one part showed that the Pioneer drive was detected but had no kernel dependencies and continued to boot. i went to repair the permitions when the onboard video went blank and the system locked up. i rembered that 10.2.8 did the same thing so i tried the 10.2.8 screen blackout fix in 10.4 and rebooted. the onboard video didnt come on but since i had a ATI Radeon 7000 i could work around in tiger to update to 10.4.7 at the time. i first repaired permitions and then ran software update and updated everything and rebooted. the onboard video came back on allong with the ATI Radeon 7000 which being used as boot video device and shown the gray apple logo with the spinning pin wheel at the bottom.
so far tiger was running great so i put a disk in the drive and nothing it didn't mount anything so i ejected it with the button on front of the drive and tryed a dvd movie and got the same nothing as with the cd. so i rebooted with the dvd in the drive al behold tiger mounted the dvd but as soon as i would try to do anything with it the drive would stop and i would have to reboot the system to gain the drive back so i can repair permissions. and never tryed to use the drive again
10.4.8 update came out i updated to it using software update and rebooted. the update went flawless so i thought to myself what if the pioneer drive worked now. so i put a cd in the drive and it mounted the disk. then i ejected it with amazement and put a dvd in and it to mounted. so i tryed to play the dvd and it played the dvd to the end of the movie. i took out the dvd and rebooted. i tryed to put the dvd back in but it didnt mount. which ****** me off as to why it was just working and now its not.
i rebooted and the dvd mounted as soon as the desktop showed up so i tried to play it but this time it only played for about 10-13 minutes before the drive stopped spinning which made dvd player stop responding which made me have to force quit the dvd player and try to restart which gave me a kernel panic. so i forced restarted (got a forum to send to apple to report the KP so i did) and the dvd mounted once again as soon as the desktop showed so i ejected the dvd and put a audio cd in and it mounted and i played the hole cd. so i ejected that and put a blank cd in and treed to burn and it got to 30% and then the drive spun down and made the disk utility stop responding. so i forced quit disk utility and rebooted. once it rebooted nothing popped up so i pressed the eject button on the drive and the cd r came out.
the OS X 10.4.8 update made the drive more stable but still wont burn anything. some times it will still not mount anything, some time it will not play anything, and still fails to copy files over to the hdd. so now im left to believe its a driver issue some where since this drive worked so flawlessly in jaguar and OS 9 but fails to work properly in tiger.
i looked in the extensions in ASP in 10.4.8 and there is a few extensions showing errors. i made a list of them to show
PatchedAppleNVRAM:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/PatchedAppleNVRAM.kext
kext Version: 3.0
Load Address: 0x4db000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
OpenPMUNVRAMController:
Version: 2.0
Last Modified: 8/9/05 6:08 PM
Location: /System/Library/Extensions/OpenPMUNVRAMController.kext
kext Version: 2.0
Load Address: 0x63a000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
GossamerDeviceTreeUpdater:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/GossamerDeviceTreeUpdater.kext
kext Version: 3.0
Load Address: 0x63d000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenPMUNVRAMController: No valid version of this dependency can be found
Integrity: Unknown
that is the list of extensions that are reporting some sort of errors. at first i was figuring it was a problem with the driver for the Pioneer drive but my friend brought over his digital audio G4 which was also running 10.4.8. and we decided to try the drive in his Mac to see if there was any problems. it mounted everything we threw in it. it played dvd's great and played audio cd's great, it copied files over to the hdd without fail. it even burned a flawless cd. ok now the ideal of the driver for the drive was thrown out the window. so it has to be something else causing the problem. either a driver for a part on the motherboard or what i have no clue.
im just wondering what driver it would be causing a problem not allowing the Pioneer drive to work properly. cause its not the drive being bad cause it worked flawlessly in OS 9.2.2 and jaguar and in tiger in my friends digital audio G4
im just wondering if anyone might know what could be done to fix this problem cause i know it can be fixed but i don't know where to begin or how. so i ask you how could i begin to fix this
thank you all for baring with me and reading all this. i know i wrote allot but i had to explain what was going on before i could ask for help so you could better understand what was going on. i have already updated the firmware to the latest with no change the firmware use to be the old 1.11

yea i have along time ago and also made a update to xlr8's drive database. cause i fixed the problems with the drive in OS 9.2.2 (AKA no burn support with the built in burning app or iTunes, now have full support for burning with the finder burn and iTunes thanks to a edited PioneerCDR authoring support extension that someone edited for me. found out that the Apple CD/DVD driver extension was at fault for the locking up on wake up with hdd sleep enabled that started when i installed the Pioneer drive. fixed with intech CD/DVD speedtools 6.0).
When i did the first report on the drive database on xlr8yourmac i reported what problems i was having in OS 9.2.2 and i think i reported that i had no problems in jaguar, and was trying to obtain a driver or something to try to get it to work. but to no avail at first. after i fixed the problems i did a update report
in jaguar the drive had no problems but no burn support. installed patchburn and the drive worked 100% in jag no problems what so ever. im thinking it has somthing to do with one or all of the extensions with errors but i can be wrong.
i just wonder where ryan has been on the forums in OWC's site. cause i would like to submit my crash log panic log and the extensions with errors so he could help track down the problems to see if it cant be fixed. but ive tried emailing him but no replay's. and his last reply on the OWC forums was back in desember 2005 a few day's over a year
i know it isnt the drive cause it worked flawlessly in tiger 10.4.8 on my friends Digital Audio but i know why it worked fine cause it has the proper files for the DA to work cause its a supported system. i would like to try to help to get xpostfacto to work better on the Beige G3 system
in tiger if it is something to do with xpostfacto

How can I get Itunes 7 to burn to my external La Cie burner, and not my internal Pioneer burner, which is behaving unreliably?

Is there a way to reset the default CD burner? I have an internal pioneer burner the DVR105, and an external firewire La Cie burner. The La Cie burner is much newer and will burn properly. However, itunes 7 is trying to burn to the internal DVR105 only, and it keeps giving me errors.
How can I get Itunes to burn to the healthy la Cie? I know my Toast software recognizes it...I have burned DVDs to the La Cie many times before in Toast. Itunes offers me no option to select which burner to use, unlike Toast. My OS is Panther.
thx
c-post

Sorry, Itunes is not giving me that dialog. Lemme tell you, it did give me a related dialog earlier today when my La Cie was not connected. Apparently it defaulted back to the Pioneer at that time. I have since reconnected the La Cie, and the system is seeing it, however Itunes won't offer me the option to burn to the La Cie. It just burns to the Pioneer, then gives me an error saying it can't burn the CD.
c-post

How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver. I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. thanks

How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver? I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. There are 4 HDMI-in ports on the receiver - BD, DVD, DVR/BDR and audio. In my system preferences for sound, the receiver doesn't show up as an output option. Can anyone please advise. (ps, this is my first time posting a question, so I hope I can find your answers!) thanks, JP downunder

For sound, try the audio output port and connecting to the RCA audio input ports on your Pioneer receiver. Use something like this:
http://eshop.macsales.com/item/OWC/PODCONNECTOR/
Ciao.

I have an Pioneer HD TV, but it does not have the HDMI port and it only has a USB connection? Can I still hook up my Apple TV to my TV?

I just got an Apple TV (the newest black one) and I have an older Pioneer HD TV. I noticed that I don't have a HDMI port on the TV and only a USB connection. My question is, can I still hook up the AppleTV to my TV with other connection wires and will it still allow me to use my ITunes music, photos and Netflix with the same picture and sound quality?
Thank you!

Welcome to the Apple Community.
The Apple TV will not work over USB, the only type of connection supported is HDMI.

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

HT4437 I purchased the Pioneer speaker that indicates capability to air play with Apple devices, however it is playing via cord and not wirelessly. I cannot locate the airplay icon on any of my Apple devices (IPad/IPhone). Any suggestions?

I cannot locate an airplay icon on any of my Apple devices to connect airplay to a Pioneer speaker. Any advice would be welcomed!

Can you tell us exactly which Pioneer speaker it is?

Pioneer XW-SMA4-K

Similar Messages

Maybe you are looking for