PIOS driver and connector not properly deployed

Hi all
I am facing problem in deploying the driver and connector to activate the barcode scanner in the SYMBOL pocket PC. The following are the drivers.
piscsym9090_wm50_xsl_crm_1_1_8
connector_wm50_xsl_crm_1_1_7
It gets deployed and I am able to see the corresponding folders in the MI\add-on, but the required files from the driver folders are not copied to the PIOS folders, as mentioned in the post-install.txt.
I am just adding the above sda files (driver & connector) as a component to my device (NetweaverAdministrator) and I sync it.
Am I missing something while deploying?.. Please advice
Thanks
Raj

Hi Raj
  Please implement note 995387.   For further information please see my reply and solution provided in thread Re: Connector addon installation fails  Hope this helps you in solving the problem.
Best Regards
Sivakumar

Similar Messages

  • I am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

    am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

    The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on
    Resetting PRAM and NVRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

  • Tuxera driver and tftp not being pushed out

    Hi all: I have three ZCM 11.2.3a servers running on OES2 SP3, one primary and two satellites. The satellites each live in a branch office connected via P2P T1's. Last week I installed the tuxera NTFS driver and have successfully set it up. I also pushed it out to one of are satellite servers (along with sync'ing tftp to that same server), but I cannot push out the driver nor sync tftp to the second satellite.
    Any suggestions on how to fix this? Thanks, Chris.

    Let me ask.
    Anders: Thanks for the reply. After some looking around and reading,
    I discovered that content replication was not running on the satellite
    server not receiving the tftp updates. I kicked replication off via
    command "zac cdp replicate" and that solved the problem.
    BUT, I also discovered the content replication is not working properly
    on that same satellite server. "zac cds" shown no schedule or throttle
    rate on that "broken" satellite server while on the satellite server
    that did receive the tftp files correctly shows a schedule and throttle
    rate. We define the schedule and throttle at the primary server level
    (default) and the satellites are set to use the default, so I am not
    sure what is broken.
    Chris.
    >>> Anders Gustafsson<[email protected]> 1/3/2014 7:08 AM
    >>>
    > but I cannot push out the driver nor sync tftp to the second
    satellite.
    What happens when you try?
    Anders Gustafsson (NKP)
    The Aaland Islands (N60 E20)
    Have an idea for a product enhancement? Please visit:
    http://www.novell.com/rms
    Anders Gustafsson (NKP)
    The Aaland Islands (N60 E20)
    Have an idea for a product enhancement? Please visit:
    http://www.novell.com/rms

  • What is the difference between driver and connector?

    Hi for me I am not able to distinguish the both. looks same. If same why two terms? if not what is the difference? Thanking you all in advance.

    I am not expert at all, but here is what I found.
    The JDBC (Java Database Connectivity) Connector is a program that enables various databases to be accessed by Java application servers that are run on the Java 2 Platform, Enterprise Edition (J2EE) from Sun Microsystems. The JDBC Connector connects an application server with a JDBC driver. The Connector allows driver vendors to package drivers so that they will be plug-and-play with J2EE applications and enables application server vendors to allow third-party JDBC drivers to be used with their products. From what I understand a driver sits between a specific database and an arbitrary application.
    A connector sits between a driver and an application server. I am not knowledgeable enough to explain more,
    but I am sure the use of the two terms is intentional and not a mistake.
    Edited by: baftos on Feb 9, 2008 9:39 AM

  • My MacBook Pro 13 inch makes a clicking noise from the hard drive and can not start up in safe mode and normal. I then ran disk utility in recovery mode and disk utility shows no problems with the hard drive. What is the problem?

    Please help me, I have a mid 2010 Mac book pro with a toshiba mk3266gsxf harddrive. It started making a clicking noise and then my computer crashed. I proceeded to boot in safe mode, but it doesn't work. When I ran disk utility in recovery mode, it showed no problem with my disk. Does any one know what the problem is?

    Sounds like a mechanical problem with the drive and it ruined the sectors where the Macintosh HD partition (and OS X, and files and programs) reside, but not your Recovery HD partition.
    If you held command option r while booting, that's Internet Recovery and it's loaded via the Internet, not via the Recovery HD partition on the boot drive, so that could mean the drive is dead mechanically or there is another issue.
    In either case the drive will likely have to be replaced, it's a matter of what occured to where and the drive state if you can recover data or not. If you made recent backups then your fine.
    My computer is not working, is my personal data lost?
    Most commonly used backup methods

  • Driver and software not found. Please help

    Hello,
    I recently updates my iTunes too the latest version now my disc burner isnt working. I get an error saying disc burner and software not found. I tried to run diagnostics and have scoured the internet and forms for answer.  I have read this and it says i am not an administrator but on my computer i checked and i am. Unless i am doing it wrong. Any help would be greatly appreciated.
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Dell Inc. Inspiron 5521
    iTunes 12.1.1.4
    QuickTime not available
    FairPlay 2.7.50
    Apple Application Support 3.1.2
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.1.1.3
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 000000EF2D410840
    Current user is not an administrator.
    The current local date and time is 2015-04-03 10:25:39.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 7c442418567b765b60e544f855b8db56
    iPodService 12.1.1.4 (x64) is currently running.
    iTunesHelper 12.1.1.4 is currently running.
    Apple Mobile Device Service service 3.3.0.0 is currently running.

    Hey dancin_chick,
    If you find you are unable to burn CDs from iTunes on your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iTunes 12 for Windows: If you have trouble burning a disc
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • Dv9000 laptop dvd drive and webcam not found. drive initializes on boot but does not show up.

    The DVD/CD-Rom drive will initialize and will read a CD when inserted but it does not show up in the BIOS or in Windows. It's a Lighscribe drive. The webcam was not found either. I recently reloaded this machine for a friend back to the factory setup. Installed all additional software and everything is working but the drive and the camera. Is there any way to actually test these devices for failure? Or is there a patch or a software package I may be missing? It's a dv9000 but it has dv9007 on the bottom. And an AMD processor.  If anybody has any ideas I would greatly appreciate the help.

    Spoiler (Highlight to read)
    It does not show up in either one. The camera or the DVD drive.  No X's or error Triangles. I guess they could have gone bad at the same time but that's not likely. It would be one heck of a coiencidence. I am wondering if there is an alternate chipset driver or patch. Maybe a controller driver? The system has dv9000 on the display and dv9700 on the model # tag. I believe 1 is Inter and the other NVidia. But the Factory image installed the NVidia drivers.  

  • External Hard Drive and Computer NOT recognizing IPod

    Can anyone please help me? I purchased an external hard drive to store all my songs instead of on my internal hard drive. I change the location of all my songs to the external hard drive and even import any new song there as well. But when I connect my IPod to my computer to update and import my new songs, my computer DOES NOT recognize the IPod. The only way my computer will recognize my IPod is if I disconnect my external drive first and then connect my IPod. But then I cannot import or update my IPod. This is driving me nuts. Any help is greatly appreciated. Thanks
    IPod 20G   Windows XP  

    Anyone find a solution for this yet??? I'm having a similar problem. I have an external drive but my tunes are on a partitioned drive on the internal. The external is off but when I go to enable disk use it keeps turning it off on me. When I have selected manually sync songs then it tells me that disk cannot be read from or written to. The computer never shows a drive for the ipod. This is really getting on my nerves!

  • Screen Flickering Everytime After Updating Synaptics Touchpad Driver And Touchpad Not Working

    I have a HP ENVY 4 1023tu Notebook with Windows 8 Pro. I always keep my pc updated. But whenever i try updated the synaptics touchpad driver through availabe updates by hp support assistant, the screen starts to flicker(Start screen and settings bar at the right) and touchpad doesn't work . The external works fine. Then I have to roll back the driver . then it comes to normal. If the driver update is meant to be updated then why its not supporting...

    I had the same problem as you with my Hp Probook 450 and I think I found a cause of the problem. I installed Windows 8.1 on it, and when I tried to install touchpad driver, after system restart my screen was blank. My problem is in AMD Radeon graphics card integrated in laptop. When I installed touchpad driver, the graphics driver somehow updated too. The problem is, that AMD only have beta driver for Windows 8.1, while the old one isn't good. So I had to start computer in safe mode and disabled graphics card in Windows device manager. Then I downloaded that beta driver and installed it (still with some small problems) So, the beta driver also isn't perfect, but it will help until they release final version. So I hope that helps you, or anyone, that might have similar problems.

  • SD Card Reader is Identified as WPD FileSystem Volume Driver and will not read SD card(s).

    HP Pavillion Elite-110f Desktop PC
    Windows 7 64-bit
    In Device Manager "This device cannot start."
    Temporarily Used MiniTool Patition Wizard to repartition my SD card for my Android phone. When I noticed issue, I uninstalled the program. Windows Disk Management see's the SD Card; Ubuntu sees the SD card; yet it doesn't appear in "Computer." Thus I cannot transfer files.
    I have reinstalled all AMD Motherboard Drivers and Alcor USB 2.0 drivers. Issue still remains.
    This question was solved.
    View Solution.

    Maybe you are missing the SD card reader driver. When you plug your SD card reader in the computer, it will automtically install a compatible driver for your SC card reader to work and to read your card data. If the driver isn't installer properly, your card reader won't work. Use Windows Update to update the driver, alternatively, you can try DriveTheLife. Related source is: http://www.drivethelife.com/windows-drivers/how-to-free-download-update-card-reader-driver-on-window...

  • External drive and iPod not recognized

    I have a MacBook and had been using an external drive with it that is no longer recognized when i plug it in. i can't find it in the Finder, it doesn't show up on the desktop, but it lights up as if it's working. I also have an older iPod Nano (2nd gen I believe) which has the same problem... i can charge it but can't access it otherwise. both used to work but stopped working at the same time. i have a 2nd external drive which works fine, though at one point it stopped working and i had to play around with time machine to get it back. what's going on? how do i access my drives? why would they work fine and suddenly not be recognized? i haven't done anything that would have harmed the data. the iPod works fine on its own. this is very frustrating.

    Well, my best advice would be to first check on another computer, your Macbook could be fine and you are simply in possession of a faulty hard drive, but because the iPod too isn't working when connected, then the USB drivers may have become corrupt.
    Worst case scenario I hate to say, is that your USB hardware is faulty but I don't think that is the case.
    What you can do if it is just the drivers is perform a re-install of Mac OS X, but I can't remember if there is a way to install it without losing all the data on your computer. This should however fix all the driver issues. I would recommend a clean install.
    Before you do anything however, how does your Mac perform with other USB devices? E.g. your mouse, flash drive, or anything else you can test? Maybe you just have 2 dysfunctional devices which is possible. Preferably get something you can read and write to such as a flash drive or another external HD

  • New hard drive and itunes not getting along

    I purchases a new external hard drive for my i mac dv 400. the hard drive was getting too full. I need to put itunes on the new hard drive but during install it tells me that i tunes needs to be in the start up volume. what does this mean? is it still possible to get the bulk of itunes on the new drive. or am I stuck again

    Hopefully someone there can help me with this problem which is related to backing up using external hard drives and two MACs. I back up using my Laptop and G5 by periodically copying the most up to date Itunes library to the other one. I use the external hard drive to copy them back and forth while at the same time, having a 3rd copy. However, everytime I do this, when I go to play a "purchased" song from my purchased songs in the library, I get the message that this is the 2nd and then 3rd and the 4th....computer I am downloading to and I only have 5 allowable downloads. Evidently, Itunes is not recognizing that this is a same computer that I have been using as a back up. Hopefully this problem is clear to those of you reading this. Any suggestions?
    Thanks,
    Skip

  • Optical drive and HD not working together in 1.67GHZ 15" G4

    I have G4 Al 1.67GHz Powerbook that I am unable to make the Optical drive be recognized when the internal HD is connected. If I put the HD in an ext Firewire enclosure and boot from that, the optical drive works fine. I have tried two Motherboards, different flex cables on both drives, different HD and Optical but no change. I did have to load the HD in a 1Ghz 12inch G4 PB since I do not have a newer OS version than 10.4 and I have seen that the 1.67GHz requires 10.4.2. However, I loaded the drive and upgraded it to 10.4.10 before installing it in the 1.67Ghz. It seems to act like a IDE master/slave conflict. I also found an older optical drive that allows you to set the drive as a Master, slave or for cable select. When I set it to slave, it work just fine. the problem is I would like to use the PB with the original UJ-846 Superdrive it came with.
    Is it possible that this is a problem with the software load?
    Any help would be much appreciated.
    Doug

    Hello.
    I have a similar problem on my al powerbook G4 as well. I have a UJ 845e superdrive. It was working just fine, but since I installed Leopard (10.5.1) it stoped working. if i insert a cd or a dvd, it will spin it for a while before rejecting it.
    Can you help me with that ???

  • New Computer-  XP to windows 7 and I transfered my music with an external hard drive and will not locate the music.  How do I fix this?

    I just copied all my itunes mucis folders onto my external hard drive and copied them over to my new windows 7 computer and I itune cannot "locate" the music.  How do I fix this?

    I suspect your library has been transformed from the old layout into the new one. See make a split library portable for details. The empty but for artwork folders you're seeing are likely to contain orphaned artwork and .ini files generated at some point by Windows Media Player. iTunes doesn't move these when it shuffles things around. Once you've made sure you can move the artist folders sideways or down into another folder, make sure nothing else has been affected, then remove.
    tt2

Maybe you are looking for