Pipe Line Processing in SAP PI
HI
Can anyone give details about the pipeline processing, How it works in SAP PI,
Thanks
PR
Hi,
search SDN for the same...
Also you can go the SXMB_ADM and there check the there the pipeline Definitions
http://help.sap.com/saphelp_nw70/helpdata/en/c9/775b3b82646c3ae10000000a114084/frameset.htm
pipeline steps will be
1. receiver determination/identification (identifies the receiver for the received sender)
2. interface determination (determines the interface mappings to be executed )
3. split messages (splits the same if there are multiple)
4. Request response message (mapping executes here)
5. call adapter (sends the final data to the receiver using the adapter specified)
Hope this info clears you
HTH
Rajesh
Similar Messages
-
Pipe line material - complete process
Hi,
Can anyone provide me the complete process for pipe line material..
ie. frm mmr to invoice setlement.
thanks in advance..Hi,
For Pipeline Process,
1. Create Pipeline Material under material type PIPE
2. You need to maintain the Pipeline Info Record in ME11. Here maintain the Prices and Tax Code mandatory
Also in SPRO > Enterprise Structure > Assignment > Materials Management > Assign standard purchasing organization to plant
There will not be any PO and GR Process for Pipeline materials. We consider that materials are available via Pipes in our plant and we have tp directly book consumption and then settlement of the same.
If Stock is directly consumed from Pipeline Stock via 201 P or 261 P via transaction MB1A or MIGO then following FI Entry will appear;
(GBB-VBR) Consumption Account - Dr
(KON) Pipeline Liabilities - Cr
Now do Pipeline Settlement in MRKO. Here you can not change the Invoice Value. Here following FI Entry will appear;
Vendor Account - Cr
Pipeline Liabilities - Dr
Prerequisite for MRKO: -
- Maintain condition record for output type KONS in MRM1
Then take printout of the Settlement Document in MR91.
Also refer following link;
[Pipeline Handling 1|http://help.sap.com/saphelp_46c/helpdata/en/fd/45c3fe9d6411d189b60000e829fbbd/content.htm]
[Pipeline Handling 2|http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b926443ad11d189410000e829fbbd/frameset.htm] -
Pipe Line Material Scenario- interesting
Hi Gurus,
I have a very genuine scenario but not getting any SAP standard solution.
Scenario is, my plant A (power plant) is producing material POWER as FERT and my another plant B consuming ELECTRICITY as pipe line material. So having two plants (different company code) & two material codes.
Now I can consume ELECTRICITY as pipe line material in production order as non stock material and invoice is generating which I can forward that to my Power Plant but in Plant A which is producing POWER I donu2019t have means to reduce Stock.
My Q is
How can I consume or reduce stock in plant A? With reference of invoice is it possible?
It looks me genuine situation of Customer and vendor where, customer is having Pipe line material in its R/3 and Vendor is declared it as finished product in its R/3. So isnu2019t we have any standard process to address this business situation.
thanks in advanceHi,
Refer the thread in which the sap experts discussed on the similar issue in detail, after going thro this hope you will understand easily how you should map your scenario
Re : Power and steam
Pipe Line Material Creation
Re : How to consider Power and Steam in power plants and paper mills
ch pavan -
Unable to see pipe line steps in the SXMB_MONI
HI,
i have done the development and quality work for my p i7.1
i was testing the messages in the Quality System.
So i went to SXMB_MONI to see the messages.
After double clicking on the successfully processed message, it shows
pipe line steps.
in that I am able to see
1.inbound message(CENTRAL)
2.XML Validation inbound channel Request
3. call adapter
4. Response
but i am unable to see
1. Receiver Determination
2. Interface Determination
3. Receiver Grouping
4. Request Message Mapping
5. Technical Routing
whereas in the develoment system i am able to see the above all.
is there any configuration i have to do in the SXMB_ADM?can i know that Configuration objects were created/ imported by using transport mechanisum?
if created ,
check the cache status and re activated those objects whatever u r posted in thread.
if transported :
u ll follow ,whatever posted by Earlier -
Jstart.exe process in sap mmc is not getting started
Hi,
The jstart.exe process of sap mmc (management console/server) is not getting started.
The status for this process is "starting the processes". Need help!
The developer trace is as follows :
trc file: "dev_jstart.7668", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7668
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:03:13 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F Mon Oct 08 10:03:13 2012
F ********************************************************************************
F Java environment properties (C:\usr\sap\SV1\J02\work\jstart.jvm)
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 7652] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
F
F [Thr 7652] Mon Oct 08 10:03:14 2012
F [Thr 7652] *** LOG => connected to Enqueue Server.
F [Thr 7652] *** LOG => connected to Message Server.
F [Thr 7652] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Deploy_offline
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 1.
F
F Mon Oct 08 10:03:15 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_deployment
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_deployment.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_deployment.out
F stderr : C:\usr\sap\SV1\J02\work\std_deployment.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Deploy_offline started with pid 7968
F ********************************************************************************
F [Thr 7652] *** LOG => Process deployment started (pid 7968).
F
F [Thr 7652] Mon Oct 08 10:03:19 2012
F [Thr 7652] *** LOG => Process deployment stopping (pid 7968).
F
F [Thr 6972] Mon Oct 08 10:03:19 2012
F [Thr 6972] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process deployment stopped (pid 7968).
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 1 completed.
F [Thr 7652] *** LOG => Starting run level 2.
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Instance_bootstrap
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 2.
F
F Mon Oct 08 10:03:20 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_bootstrap
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_bootstrap.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F stderr : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Instance_bootstrap started with pid 7952
F ********************************************************************************
F [Thr 7652] *** LOG => Process bootstrap started (pid 7952).
F
F [Thr 7652] Mon Oct 08 10:03:47 2012
F [Thr 7652] *** LOG => Process bootstrap running (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (RUNNING @ 0, INACTIVE).
F
F [Thr 7652] Mon Oct 08 10:04:10 2012
F [Thr 7652] *** LOG => Process bootstrap stopping (pid 7952).
F
F [Thr 4436] Mon Oct 08 10:04:10 2012
F [Thr 4436] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process bootstrap stopped (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 2 completed.
F [Thr 7652] *** LOG => Starting run level 3.
F ********************************************************************************
F Java process [debugproxy] properties:
F section name : debugproxy
F config file : C:\usr\sap\SV1\J02\exe\dproxy.properties
F node name : Debug_Proxy
F home directory : C:\usr\sap\SV1\J02/j2ee/rdbg.proxy
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F ********************************************************************************
F ICM process [icm] properties:
F section name : icm
F config file : C:\usr\sap\SV1\J02\exe\icm.properties
F node name : ICM
F home directory : C:\usr\sap\SV1\J02\work
F shutdown timeout : 122000 ms
F exit timeout : 7000 ms
F ********************************************************************************
F ********************************************************************************
F Java process [server0] properties:
F section name : ID24836450
F config file : C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F node name : server0
F home directory : .
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : true
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Starting the processes" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 0.
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\icman.EXE
F arg[ 1] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 2] = -nodeId=1
F arg[ 3] = -f
F arg[ 4] = C:\usr\sap\SV1\J02\work\\dev_icm
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_icm.out
F stderr : C:\usr\sap\SV1\J02\work\std_icm.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process ICM started with pid 7336
F ********************************************************************************
F [Thr 7652] *** LOG => Process icm started (pid 7336).
F
F [Thr 7652] Mon Oct 08 10:04:12 2012
F [Thr 7652] *** LOG => Process icm running (pid 7336).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 1.
F
F Mon Oct 08 10:04:16 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=2
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -DSAPINFO=SV1_02_server0
F arg[ 4] = -hostvm
F arg[ 5] = -nodeName=ID24836450
F arg[ 6] = -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F arg[ 7] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 8] = -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
F arg[ 9] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_server0.out
F stderr : C:\usr\sap\SV1\J02\work\std_server0.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process server0 started with pid 7616
F ********************************************************************************
F [Thr 7652] *** LOG => Process server0 started (pid 7616).Hi Ravi,
Thanks for your quick response.
Where do I find the default trace for this?
The server0 process status is "Waiting to start". The developer trace for server0 is as follows :
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7616
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:04:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 7280] MtxInit: 10002 0 2
I [Thr 7280] MPI: dynamic quotas disabled.
I [Thr 7280] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 7280] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 7280] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 7280] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7616
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 7364] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 7280] Mon Oct 08 12:28:13 2012
F [Thr 7280] *** LOG => Command STOP 0 {}.
F [Thr 7280] *** LOG => Result for STOP 0 {}: 0 ok, 00000000.
F
F [Thr 7280] Mon Oct 08 12:28:33 2012
F [Thr 7280] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:28:33 2012
J
J ================================================================================
F [Thr 7280] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 684] Mon Oct 08 12:28:33 2012
M [Thr 684] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 5508
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:28:34 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 500] MtxInit: 10002 0 2
I [Thr 500] MPI: dynamic quotas disabled.
I [Thr 500] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 500] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 500] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 500] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=5508
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4136] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 500] Mon Oct 08 12:29:02 2012
F [Thr 500] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:29:02 2012
J
J ================================================================================
F [Thr 500] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 5068] Mon Oct 08 12:29:02 2012
M [Thr 5068] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7704
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:29:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 4980] MtxInit: 10002 0 2
I [Thr 4980] MPI: dynamic quotas disabled.
I [Thr 4980] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 4980] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 4980] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 4980] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7704
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4736] *** LOG => SfCJavaVm: abort hook is called. -
Dear Experts,
I am quiet confused about this clearing process in SAP.
For example a cash discount in SAP is posted with the following entry
01 Cust a/c 15000
40 Cash disc a/c 3000
50 Sales or revenue a/c 18000.
The above open item in the customer account is cleared when payment is recieved from the customer. How the G/l and cash discount account are cleared. I know tcode F-03 clears a g/l account manually when there are debit and credit line items which balance to zero . In what cases the above tcode is used?
Appreciate if you can explain me.
Rgds
KomalHello,
There is no rule that each account needs to open item managed and cleared completely. There are number of accounts, you cannot maintain as open item managed. By default your customer and vendor accounts are created as open item managed.
If every account cleared completely, then at the end of the year, you will not have any balances in your Trial Balance. In your case, for example the balances like like cash discount and sales will go to your profit and loss account and the profit or less for the financial year will be discovered.
Let us take your example itself:
Customer A/c Dr 15000
Discount A/c Dr 3000
Sales Account Cr 18000
Now think that you have received payment from customer
Bank A/c Dr. 15000
Customer A/c 15000
Presuming that you do not have any other transactions for the year.
Your P&L Account (You have a profit of 15,000 = 18000-3000) have profit of 15000 and which will be moved to Liabilities side of your Balances sheet and against which you have 15000 bank balance.
Hope this information clarifies your doubts.
Regards,
Ravi -
Dear All,
I have a pipe line material. Now for this how to raise a PO.
Steps invloved in PO.
Regards,
Pardeep MalikHi,
1. You can create a material with PIPE material type or else you can use any material type but that should allow pipeline process.
2. You should have Inforecord for the material with valid conditions, price will pick only from inforecord.
3. If requied you can maintains ource list or else you can select during goods issue.
4. From the Inventory Management menu, choose Goods movement ® Goods issue.
Maintain the data on the initial screen. Choose Movement type ® Consumption ® To cost center (or To order, To network, All account assignments) ® From pipeline (Movement types : 201 P, 261 P, 281 P, or 291 P)
5. On the collective entry screen, enter the account assignment. Enter the items.
You do not have to enter the vendor as this will be found automatically by the system.
If more than one vendor is possible, a pop-up window appears with a list of pipeline vendors, from which you can select the vendor you require.
Post the goods movement.
Regards,
Prabu -
Mapping consignment process into SAp
Hi Gures,
This madhusudhsan can any body tell me how we are going to mapp the consignment process in SAP is there any documentation please send to my mail.Id
[email protected] if u wont mind with screen shots if it is available.
Thanks and Regards,
P.Madhusudhandear mahdu
CONSIGNMENT
In consignment orders you are allowing the stock to sit in your customer location. Once he informs that he used the stock you will invoice him. If he returns the stock you will accept the stock to take it back.
It is defined in 4 steps.
1. Consignment fill up:
Sales document type is KB
Item category KBN
schedule line category E1
In this step; you are not invoicing the customer, document flow is sales order -
delivery item category. It will not be relevant for billing and pricing because you are not charging money for these goods in this step.
In schedule line category, you will set movement type 631 & set for availability check and TOR.
2. Consignment Issue.
Once the customer informed you that he used all the goods or partial goods then you will create consignment issue for used goods.
Sales document: KE
Item category: KEN
shedule line category: C0 or C1
Here you are invoicing the customer(because he used the goods). you are assigning the delivery documnt and billing document to the sales document.
In item category, you are setting relevent for billing, pricing, special stock.
In schedule line category, your setting is 633 movement type, relevent for availability check & TOR.
3. Consignment Return:
Customer found that some goods are damaged or he not able to sold the goods he want to send it back. that you are creating this document.
Sales document type: KR
Item category: KRN
Shedule line category: D0
You will assign delivery document and billing to sales document. you will create return order, return delivery, return billing.
Your setting item category relevant for billing, returns, pricing, special stock.
Your setting schedule line item category: 634 movement type, NO availability NO TOR.
4. Consignment Pick up:
Even if you create the consignment return the goods are not come to direct to your plant. For that you need to create consignment pick up. Here the owner ship is not changing so you do not need to create billing.
Assign return delivery to sales document type.
Sales document: KA
Item category: KAN
schedule line category: F0 & F1
your setting item category relevant for returns, any schedule line category relevant for 632 movement type, MRP, availability check, delivery.
Now you check your plant stock. Stock will increase.
rewards if it helps
siva -
HI
can we creatte process order for pipe line material for example electricity/steam. and can we create pipe line material without info record mean without any vender detail.
RegardsDear Mr.R.Brahmankar,
This is my problem also i will explain you the scenario
In Industrial Battery manufacturing The electrolyte is a material (Like Potassium Hydroxide and sulphuric acid )which are produced with a certain concentration% in acid reactors in-house and used in Battery manufacturing heavily.
We have assigned these materials thru Activity types in-spite of the requirement of pipe line material. Can we assign this materials which are produced in house (but Category similar to pipe line materials)as pipe line materials in BOM and what would be the Impact on the system.
Pavan -
Production order with pipe line material
Production ordre created and got confirmed and found pipe line materials got stuck in COGI and on analysis found in that specific ordrer ordre pipe line material are not activated with special stock key indicator i.e. 4.
Due to this it got stuck in cogi and for the same material created an order and found there is a allocation and activated with special stock key indicator i.e. 4.
Help me to resolve the existing Goods issue from COGI and cause of not activated with special stock key indicator i.e. 4. in production order.Dear ,
did the pipe line material is showing in production reservation as one of the BOM compoenent?
If it is the case , then cancel the confirmation in CO13 and try to connfirm the operation with Clear Reservation Option .
Refer the below thread which may help you to figure out the issue :
Re : How to consider Power and Steam in power plants and paper mills
Re : Power and steam
Regards
JH -
How to select LAST line from a SAP table?
Hi developers,
I need to select the last line from a SAP table, NOT from an internal table.
Something like
SELECT SINGLE LAST FROM pa00169..
any help is more than welcome.Javier,
Based on this statement from you:
"i created a Z table, its a config table that stores some bussines rules, and an id counter, so in order to update that counter i need the last line of the ztable."
I have one additional solution which is the "text box" approach IF the 'id counter' mentioned above is a numeric data type.
If so, use an SQL function to get the highest value of ID_COUNTER.
Then simply add one to it to produce a new, unique, higher-order primary key.
See below:
data: l_id_counter like ztable-id_counter.
data: new_id_counter like ztable-id_counter.
select max( ID_COUNTER ) from ztable into l_id_counter.
new_id_counter = l_i_counter + 1.
Now new_id_counter will be the unique, primary key IF this is the only field in ZTABLE's primary key.
This will also GUARANTEE that your new record is built correctly. -
Hi Experts,
I need to remove a name on a group list in Outlook as the user is getting email delivery failure when processing via SAP (He sends the invoice for approval and emails get sent to different users for approval.) One of those users has left the company and so the user gets a email delivery failure error.
How do I remove this user who is no longer with the company?
The user is saying: When I approve an invoice in SAP it sends an email notification through outlook. One of those users is no longer with the company so it cannot deliver the notification, and in return send a delivery failure (in outlook). I am approving the invoices from my SAP Workplace inbox.
How do we know what group the email is going to?
Please let me know if you have seen this issue before. Greatly appreciate your help.
Thanks,
AsadHi,
Please check whether you are using a custom z program for sending emails of approved invoices to users. If yes then either the user email ids are hardcoded in the program else a ztable is maintained for them. -
System Refresh Process of SAP Web AS 6.20 in BW env
We are in the process to refresh our BQA system from the offline backup copy of BPR(Production server). We did it number of times in 4.6 R/3 server successfully in past. We used the oracle backup/restore method for refresh process in R/3. The same oracle backup/restore method we used for BW refresh. But this method is not able to change the schema name in tablespace (in BQA system, tablespace are like PSAPBQAFACT and in BP1 , it is PSAPBP1FACT). Seems to me this is not the right method to refresh SAP Web AS 6.20 and above systems.
Could anyone pls suggest the right documents or if someone has the procedure for refresh process of SAP Web AS 6.20, pls confirm.Hi Reiner! Thanks for your reply!
- I want to create a secure connection between the .NET client and the SAP Web AS 6.20 Web Service, and HTTPS would be great. Is there any documentation regarding this issue?
- No, I don't want to provide the result of a Web Service as a Web Service. Maybe I was quite unclear... :/ What I meant was:
I want my Web Service to return a table (the result comes in the structure of a table). How do I define the Out-parameter in transaction se37 to accomplish this? Right now the best solution I got was to construct an array of strings (like the ZZVALUES int array in the example) where each position of the array, is a string that has the various fields of the table i want to return concatenated.
I'm able to retrieve the array in Visual Studio .NET 2003 client, and separate the fields (to fill a table again with them). If I could just return the table from SAP and receive it in .NET would be much more simpler.
Thanks again. -
How to leave half line space in SAP Script
Actually , I have a doubt regarding half line spacing on SAP Script ..
I am working on Cheque Printing with fbz5
Now the issue in the date, there are 8 box for the date in cheque .
i.e 0 2 0 7 2 0 1 4
Currently the date is comming on the cheque box ..like half up the box and half inside
IF I give one space in cheque window of my script with / its taking complete 1 space
and result is ,it going down ..with one space
I want to leave exact half line space ..so date is adjusted in the middle .
I also tried moving my cheque window from upper margin in all format(CH , CM , MM IN ..) above
But it is taking exact one space .Hi Darshit,
While creating the tab position, you have a option of line spacing.
make it to 0.5 lines, to make exact half line.
And also another way out, you can check by moving the 8 box created for the date up by 0.5 lines.
Regards,
Ganesh Lathi. -
How to map different Retail store business processes in SAP
Hi
In our stores( Retail Business) there are two sales sections, In the first section we have Point of Sales systems, here we placed our materials in racks, after confirming and creating sales order customer collects pick list and goes to the location to pick the products. Here customer Invoice will be created before delivery.
In second sales section normally order fulfillment will take place. Customer visit this section and select products and places an order. But the delivery will be at a later date. We receive some down payment from customer and we create sales order with scheduled delivery. while delivering the products we create delivery note and it will be sent to customer, Our driver will carry the delivery note along with products to the customer and take customer signature on the delivery note. In this second process we are creating Invoice after delivery only.
Could any body suggest me how can we map these two processes in SAP?
Your suggestions will be highly appreciated.
Thanks and RegardsHello,
Check out these links, as they would be useful:
1. http://www.sap.com/industries/retail/businessprocesses/index.epx
2. http://help.sap.com/bp_retailv1500/Retail_NL/documentation/RET_Solution_Scope_EN_NL.doc
3. http://204.154.71.138/pdf/8560/Serving_the_Needs_of_Food_Retailers.pdf
Regards,
Gauravjit.
reward points if the links are useful
Maybe you are looking for
-
Wrongly payroll run for one employee, who left company several month ago
Hi all, There is one case. One employee left company several months ago and his payroll data was also determined in the system. But the month payroll run included this guy not correctly. And also there are not any change found for his info type data
-
Free sample sales net value in invoice should give zero value.
Hello Experts, I have a question on the cess values aspect of free sample sales.Recently, I have configured a free sample sales for one of our clients. Now, in the invoice the user does not want the cess values to be passed to the customer.I changed
-
Airport Extreme n, difficulty connecting to Airport Express g
Can anyone help? I have just bought a new n rated Extreme to replace my old round one, I have 3 Airport Express , 2 connected to stereos and one acting as a relay, however I cannot set up one of the AX's to act as a relay between my imac and the othe
-
How to add a location of face in the new Photo App?
How to add a location of face in the new Photo App?
-
Nokia Suit problem when I update to nokia belle
Hi,All Now iam updating my e6-00 to nokia belle using nokia suit It take 45 minutes to downloading 305 MB of the update then it takes 1 hour and still till now showing the moving circle which indicates download is still running with two words :: "cre