Pipeline error during MB1A

Hi guys
I encountered a error in a pipeline process
during the transaction MB1A.
ther error was
error : Purchasing info record not found in purchasing organization ASPO
please try to help me out to overcome this error
regards
Jino

hi,
your palnt is assigned to more then one purchase org. and which creates ambiguity for the sytem
please mak eone of the org as standard org. in img and before that please check whether the plant is asigned to more then 1 org.
i can say that you have maintained inforecord for standard but you have not maintained for consignment the combination in ME11.
so create info record for consignment.

Similar Messages

Want an Error message during MB1A save

Hi All
When MB1A transaction is being saved, I want to throw an error message by comparing the Batch line items.
For this I am using bADI MB_DOCUMENT_BADI. But it is going to dump after SAVE. When i see the OSS Notes , I found that we should not throw an error during MB1A save.
How can we resolve this issue?
In this badi only , I am able to get the Batches in table
XMKPF Importing Type TY_T_MKPF
. All other BADI's importing paramerter s are in structure.
Regards
Visakan

Hi Nagaraj
Have you come across this scenario? Or just suggesting solution?
Because this is a specific dump when saving MB1A after putting error message in BADI.
Regards
Visaka

Pipeline Error

Hi guys
I encountered a error in a pipeline process
during the transaction MB1A.
ther error was
error : Pipeline material 1598 has no fixed vendor
please try to help me out to overcome this error
regards
Jino

Dear Jino/ Panagiotis,
We directly Consume the Pipeline material first using Transaction MB1A & Movement Type: 201, with Special Stock Indicator: P.
The account is maintaine in OBYC , For Transaction Key: KON - Consignment payables
After consume the material , settle the Vendor liabilities using Transaction MRKO.
Have you created Info-Record on Vendor in ME11?
If still, Problem persists, Consult you MM-Counterpart, or Atleast, post the query in to [Forum: ERP - Logistics Materials Management (MM)|SAP ERP - Logistics Materials Management (SAP MM);
Best Regards,
Amit

Error during saving a multipart message

Hi All,
We are currently integrating third party system with SAP ECC as a part of our FICA implementation.
We have configured soap adapter initially at the sender side and IDoc adapter at the reciever intially. After looking at the performnace of the soap adapter, we thought of using HTTP sender instead of a soap sender, so that the webservice makes a direct call to PI integration engine instead of Adapter engine.
Now my scenario looks like.
Java/J2EE client -> webservice call > XI pipeline>SAP.
So here , i havent used http adapter at the source side.
My problem is when i call the XI pipleine url as suggested by the below blog
<a href="/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine Soap Inbound channel of the Integration engine</a>
I am getting the follwoing error as seen below
May 31, 2007 6:05:50 PM com.sun.xml.messaging.saaj.soap.MessageImpl saveChanges

SEVERE: SAAJ0540: Error during saving a multipart message
But for my scenario, i havent used any soap with attachments to pass through PI.
My soap message is a simple soap envelope with soap part-message.(body).
Please do help me out in resolving this issue.
Thanks & Regards,
Dhana
null

Hi Steve,
My Soap Action is already applied and I traced out few options after googling it up and added few jars (xalan.jar and saxon8.jar). Even now I am getting the same error.
Please do tell me what to do in this regard.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during conversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSER">UNEXPECTED_VALUE</SAP:Code><SAP:P1>Main/@versionMajor</SAP:P1><SAP:P2>000</SAP:P2><SAP:P3>003</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>XML tag Main/@versionMajor has incorrect value 000; expected value is 003
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Soap Error message:Error during conversion of XI message
Thanks,
Dhana

Error during cache refresh

Hi guys,
In my scenario XI to R3 via ABAP Proxy. In cache R/3 side shows me two red triangles: unable to refresh content and an error during last update. The error id BUSINESS_SYSTEM and the message is: NO INTEGRATION SERVER.
Yesterday admin team changes the physical machine! I already create a new technical system and a new business system and import the BS to ID with a same name! I need create all the objects again: receiver interface, determination, etc?
I also check the transactions SLDAPICUST, SICF, sm59, smicm, slscheck and sxmb_adm > Integration configuration.
The icf services are running, the RFC connections shows a http code 500 (it means that is ok) and in integration configuration I have defined my Business sys type "LOC" and in IS_URL, the URL of XI integration server.
I think everything is ok!
Guys any suggestions to check other points?
Thanks in advance,
Ricardo.

In the SLD your XI business system should contain the pipeline URL http://<host>:<abap_port>/sap/xi/engine?type=entry and this business system role should be Integration Server.
regards
Shravan

Error during creation of info record for pipline material.(Urgent)

Hi All,
We are getting the following error during creation of Info record for pipeline material
" Material XXXXX is not a pipline material"
we have checked the material master and found it is a pipeline material.
Kindly advice on the same.
Help in any form will be rewarded.
Best Regards
Arihanth

Hi Arahanth,
The steps u need to check are;
1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
2) when u create the info record (ME11) ensure the info category is selected as pipeline.
Hope its clear to u
if solved do reward me points
Regards
Anil Thai

HTTP Status Code 200 Received But Error During Response Parsing

Hi Experts,
We are testing a simple Proxy(ECC) to File scenario in QA. This interface was working fine in Dev but we are getting the following error here in QA:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">OK_BUT_NO_XI_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
We searched other threads but could not get any solution. Please provide suggestions.
Thank You.
Regards,
Anandan

the problem was due to high volume message (247 MB ) ...Java stack was not able to process this huge message ,that is the reason ,it started automatically and as a result , "HTTP Status Code 200 Received But Error During Response Parsing" due to unavailability of AFW during Call adapter step in the pipeline processing...
We have done the following activities in order to solve this problem....
increase the value of icm/HTTP/max_request_size_KB to 512MB
 icm/wp_roll_timeout to maximum
 HTTP TIMEOUT to 1800 sec
 icm/wp_roll_timeout to maximum
 mpi/total_size_MB to maximum
 mpi/buffer_size to maximum
and then increased the maxthreadcount ,maxcontentlength using config tool...
and also increased the java heap size to maximum....
After doing everything ,the file has been successfully processed....
the problem has been resolved...

Error during search for WM movement type (911)

Hi gurus,
I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
"Error during search for WM movement type (911)"
any idea of this message?
Thanks in advance

The probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
Lakshman

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Unknown Error during Recovery - iPad no longer Recognized by iTunes

I have a 3rd Generation iPad which I was attempting to perform a factory reset. I received an "Unknown Error" during the process and from that point on I have been unable to get iTunes to recognize my iPad in recovery mode (or otherwise).
I have tried every thread on the subject, but I found one interesting thing. If I connect the iPad with the same cable, etc. to another computer it immediately recognizes it in recovery mode and offers to restore the iPad.
It seems like my computer is not recognizing the iPad because it was in the process of restoring the device when the error occurred. Does anyone know if there is a way to reset or fix this issue. I would prefer not to update iTunes and download both the new iTunes and iPad software again and use another computer if it is not necessary.
Any help would be appreciated.
Thanks

Hey KSHItunes,
That was a good test to try your iPad on another computer. It does seem to isolate the issue to something with your computer setup.
Although you would prefer not to update iTunes, there may be steps in this article which can help.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Please check it out.
Regards,
Nubz

Win 8.1//Recover error at fourth supplemental disc//Detect some error during PININST_BBV.

Hii Team,
Please find the product details for your need full:-
Product number: F6C57PA#ACJ
Product: HP ENVY TouchSmart 15-j109tx Notebook PC (ENERGY STAR)
Issue- recovery attempt has failed select one of the three buttons.
Below is the error log in the notepad:-
[13:34:51.78] ChkErrBB.CMD : Detect some error during PININST_BBV.
[13:34:51.78] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[13:34:51.78] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
Tss to isolate the issue:- Bios updated no go, bios defaults no go, checked with another set of rcds but same issue on the fourth discs on different dvd's also.
RCD kit Part#:-
749548-D62
749549-D62
749550-D62
752228-B22
Error Comes at recovery dvd:- 752228-B22.
HP Experts kindly intervene with the case for a way out from the issue asap.

This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
Please see HP Forum thread Recovery - "Detect error during PININST_BBV – Fix: Set BIOS to Factory Defaults;
1) Boot computer – immediately click / press F10 to get into the BIOS Manager.
2) Press F9 to set the BIOS to factory default.
3) Press F10 to "Save and Exit"
4) Redo the Recovery – remember to leave the wireless light “on” during the Recovery
Other thing to try: don't use the supplemental disc... set the system date in BIOS to 2012... run "Minimized Recovery" instead of "Factory Reset"
I currently have the same issue with my HP 15t-j100 CTO and HP 13 Split x2 (both on loan from HP). I have tried various fixes/solutions posted on the forum, but haven't been successful in recovering my computers. In both cases I an using a USB Flash Drive set up as HP Recovery Media. It appears you are using an external CD/DVD drive and 4 DVDs as your HP Recovery Media. My computers display a "Restoration Incomplete" dialog box and CTOERROR.flg displays;
Please contact HP in your country / region, via the HP Worldwide Support Portal, for official HP assistance.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Microsoft office 2013 encountered an error during setup in Window 8.1

Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.

Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Error during processing local bean: localejbs/RfcAFBean

Hi everybody
we currently trying to perform a RFC Call to our developpment system. The scenario is a simple File to RFC Scenario and it worked until yesterday. Since today the Messages stuck in the RFC receiver Adapter with the following errors in the audit log:
MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Exception caught by adapter framework: Exception thrown in method process. The transaction is marked for rollback.
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
The deffaultTrace.trc show the following entries. Looks like an error in localejbs/RfcAFBean:
RfcFunctionName:ZPSCD_INTERFACE_XXXXX
Date : 07/13/2007
Time : 9:32:39:301
Message :
[EXCEPTION]
com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:118)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264)
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.listener.AFWListenerBean.onMessage(AFWListenerBean.java:267)
     at com.sap.aii.af.listener.AFWListenerLocalObjectImpl0_0.onMessage(AFWListenerLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:306)
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1034)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(ReceiveConsumer.java:392)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.onMessage(ReceiveConsumer.java:86)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NoSuchMethodError: com.sap.aii.af.rfc.core.config.RfcConfigManager.isPPActive(Lcom/sap/aii/af/service/cpa/Channel;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.isPPActive(RfcAFBean.java:385)
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.process(RfcAFBean.java:240)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
     ... 14 more
Severity : Error
Category :
Location : com.sap.engine.services.ejb
Application : sap.com/com.sap.aii.adapter.rfc.app
Thread : SAPEngine_Application_Thread[impl:3]_44
Datasource : 312846850:/usr/sap/XDS/DVEBMGS31/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 0003BA5D1D27006D000002BF0000653B000435201DA336D6
Source Name : com.sap.engine.services.ejb
Argument Objs : com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:118)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264)
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.listener.AFWListenerBean.onMessage(AFWListenerBean.java:267)
     at com.sap.aii.af.listener.AFWListenerLocalObjectImpl0_0.onMessage(AFWListenerLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:306)
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1034)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(ReceiveConsumer.java:392)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.onMessage(ReceiveConsumer.java:86)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NoSuchMethodError: com.sap.aii.af.rfc.core.config.RfcConfigManager.isPPActive(Lcom/sap/aii/af/service/cpa/Channel;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.isPPActive(RfcAFBean.java:385)
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.process(RfcAFBean.java:240)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
     ... 14 more
Arguments : com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:118)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264)
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.listener.AFWListenerBean.onMessage(AFWListenerBean.java:267)
     at com.sap.aii.af.listener.AFWListenerLocalObjectImpl0_0.onMessage(AFWListenerLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:306)
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1034)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(ReceiveConsumer.java:392)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.onMessage(ReceiveConsumer.java:86)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NoSuchMethodError: com.sap.aii.af.rfc.core.config.RfcConfigManager.isPPActive(Lcom/sap/aii/af/service/cpa/Channel;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.isPPActive(RfcAFBean.java:385)
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.process(RfcAFBean.java:240)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
     ... 14 more
Dsr Component :
Dsr Transaction : 3bdbc330311311dcb33b0003ba5d1d27
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives :
Resource Bundlename :
Session : 0
Source : com.sap.engine.services.ejb
ThreadObject : SAPEngine_Application_Thread[impl:3]_44
Transaction : SAP J2EE Engine JTA Transaction : [12ffffffa5ffffffaa200435f]
User : J2EE_GUEST
Date : 07/13/2007
Time : 9:32:39:304
Message : Error during processing local bean: localejbs/RfcAFBean
Severity : Error
Category :
Location : com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(String , ModuleData)
Application : sap.com/com.sap.aii.af.app
Thread : SAPEngine_Application_Thread[impl:3]_44
Datasource : 312846850:/usr/sap/XDS/DVEBMGS31/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 0003BA5D1D27006D000002C00000653B000435201DA33A4D
Source Name : com.sap.aii.af.mp.ejb.ModuleProcessorBean
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction : 3bdbc330311311dcb33b0003ba5d1d27
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives :
Resource Bundlename :
Session : 0
Source : com.sap.aii.af.mp.ejb.ModuleProcessorBean
ThreadObject : SAPEngine_Application_Thread[impl:3]_44
Transaction : SAP J2EE Engine JTA Transaction : [12ffffffa5ffffffaa200435f]
User : J2EE_GUEST
Date : 07/13/2007
Time : 9:32:39:306
Message : Rolling back transaction for message 38d82020-3113-11dc-c07b-0003ba5d1d27(INBOUND) due to: Exception thrown in method process. The transaction is marked for rollback.
Severity : Error
Category :
Location : com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(QueueMessage, MessageController, Services)
Application :
Thread : SAPEngine_Application_Thread[impl:3]_44
Datasource : 312846850:/usr/sap/XDS/DVEBMGS31/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 0003BA5D1D27006D000002C10000653B000435201DA341C8
Source Name : com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer
Argument Objs : 38d82020-3113-11dc-c07b-0003ba5d1d27(INBOUND),Exception thrown in method process. The transaction is marked for rollback.,
Arguments : 38d82020-3113-11dc-c07b-0003ba5d1d27(INBOUND),Exception thrown in method process. The transaction is marked for rollback.,
Dsr Component :
Dsr Transaction : 3bdbc330311311dcb33b0003ba5d1d27
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives :
Resource Bundlename :
Session : 0
Source : com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer
ThreadObject : SAPEngine_Application_Thread[impl:3]_44
Transaction : SAP J2EE Engine JTA Transaction : [12ffffffa5ffffffaa200435f]
User : J2EE_GUEST
It looks like the JCO Bean has an error. Any Ideas
Regards Oliver

Hi Bhavesh
I found some more interesting log entries and it seems to be a user password problem:
Retries exceded, set message 38f10280-3388-11dc-9c91-0003ba5d1d27(INBOUND) to status NON_DELIVERED.
Name or password is incorrect (repeat logon)
JCoClient connection missingHost:xdsci_XDS_31|AdapterType:MessagingSystem|Sender::FileServer|Receiver::PSCD_CDD|Interface:ZPSCD_INTERFACE_DECLAR_TVA:urn:sap-com:document:sap:rfc:functions|MsgID:38f10280-3388-11dc-9c91-0003ba5d1d27
Is this the user/password of the channel or is it service user for the JCO?
Regards Oliver

Error during the upgrade phase "start_shdi_first"

Hello,
We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
Here the error message goes....
starting system failed rc=0
to analyse the error during start of shadow instance
view files 'Startsfi.log' and 'devtrace.log'
in directory usr\..put
repeat phase until shadow instance is started
and u can logon instance no '01'"
We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
Appreciate your response
Startsfi.log
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_mss_schema=de4
4 ETQ399 auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_mss_schema=de4
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2 ETQ353 Starting system
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
DEVTRACE:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid DE4
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, ASCII, optimized
pid 2272
Mon Feb 18 16:08:40 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c 1239]
 shared lib "dw_xml.dll" version 111 successfully loaded
 shared lib "dw_xtc.dll" version 111 successfully loaded
 shared lib "dw_stl.dll" version 111 successfully loaded
 shared lib "dw_gui.dll" version 111 successfully loaded
 shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Feb 18 16:08:52 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
Mon Feb 18 16:09:10 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MTW02SDEC01_DE4_01 <
DpShMCreate: sizeof(wp_adm) 19976 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 065C0040, size: 4241064)
DpShMCreate: allocated sys_adm at 065C0040
DpShMCreate: allocated wp_adm at 065C1B30
DpShMCreate: allocated tm_adm_list at 065C6938
DpShMCreate: allocated tm_adm at 065C6968
DpShMCreate: allocated wp_ca_adm at 06936BF8
DpShMCreate: allocated appc_ca_adm at 0693B248
DpShMCreate: allocated comm_adm at 0693C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 069BD868
DpShMCreate: allocated gw_adm at 069BD8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069BD8D8
DpShMCreate: allocated wall_adm at 069BD8E0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2046 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12437]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Feb 18 16:09:13 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4724] Mon Feb 18 16:08:40 2008
[Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, optimized
pid 5420
[Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c 1824]
[Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 4724] MsGetOwnIpAddr: my host addresses are :
[Thr 4724] 1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
[Thr 4724] 2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
[Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
[Thr 4724] HTTP logging is switch off
[Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
[Thr 4724] ms/icf_info_server : deleted
[Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
[Thr 4724] CUSTOMER KEY: >J1537289841<
trc file: "dev_rd", trc level: 1, release: "700"
Mon Feb 18 16:09:10 2008
***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c 1694]
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, optimized
pid 2344
gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm) 19976 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06110040, size: 4241064)
DpShMCreate: allocated sys_adm at 06110040
DpShMCreate: allocated wp_adm at 06111B30
DpShMCreate: allocated tm_adm_list at 06116938
DpShMCreate: allocated tm_adm at 06116968
DpShMCreate: allocated appc_ca_adm at 0648B248
DpShMCreate: allocated comm_adm at 0648C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0650D868
DpShMCreate: allocated gw_adm at 0650D8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0650D8D8
MtxInit: -2 0 0
Mon Feb 18 16:09:14 2008
GwDpInit: attached to gw_adm at 0650D8A8
Thanks,
Vadi

Dear All,
The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
"basis05" during upgrade.we changed it back to welcome and it started working fine.
Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
Thanks for all your replies.

Pipeline error during MB1A

Similar Messages

Maybe you are looking for