PIR not showing in Md04 after certain date

Hi
The PIR's are coming from LTP.
The PIR's which are created after 03/2015 are not showing in MD04
MRP run back ground with NETCH still why PIR's are not showing?
What settings I have to check..
Regards,
Srihari.M

Please check the following :
1.If you have done splitting of the required qty during PIR creation . , please check in MD62 whether , you have un-checked the Active Version for some of them .If those qty. are falling after 03/2015 , then it will not pop up in MD04
2.While creation of PIR , if the planning period is beyond planning horizon , it will flag you a message and requirement will not display in MD04 , then check the same in OMPD and compare with planning period.
Regards
JH

Similar Messages

Issue regarding LSMW, not showing all records after Read Data

Dear Experts,
Plz help.. I need to configure a LSMW for ROH material.. so I made recording, n then create a structure.. accordingly.
the problem is.. at the time of reading data from .txt file.at the step of Display Read Data it showing only 50 records, rest are not displaying.. but not showing any error.. so my question to our expert that is their any limitations for reading data... if their.. then how could it be elasticated...
plz suggest..
regards,
sandy

the read step has a selection screen where you can define from which to which record you want read.
make sure this selection is empty for a test.
Further check if your source file has more than 50 records.
then make sure that you really read this source file and not any other version (check path and file name in step 7 of LSMW)

ICal not showing any events on certain dates.

Preface: I'm an intermediate computer user and I have never experienced an issue that I was not able to resolve with some troubleshooting, until now. Starting yesterday, iCal would not allow me to view/create events on dates March 13th - March 17th in Month View. I am able to create and view events on every other day of March, as well as other months in 2012. It is most peculiar because I am able to see the "new events" created on those dates when I switch to Day view.
Steps I've taken thus far: I've disabled iCloud, deleted all calendars from computer, quit the app, cleared ALL possible content (cache, icom, metadata, app support, etc) - Rebooted, reopened iCal (with icloud disabled) and was still experiencing the same issue.
I then ran a terminal command to completely wipe the iCal application, cleared all the data once again, rebooted, then migrated a fresh copy of iCal from another computer (running same OS) and the issue still persists.
Any thoughts? It's not an iCloud issue (which I immediately assumed), it's not an issue with the copy of the App I have, it's not an issue with my OS (I recently reformatted from clean slate and have not had a single other issue than this)....
I'm out of possible ideas!

Spent more and more time trying to figure out a solution and finally came across a simple fix! If the start day is changed to Monday from Sunday it will fix this issue! (However, if changed back to Sunday the issue will persist)
Thanks to Musitrio for the head's up on this one.

PIR visible in MD63 but not showing in MD04

Hi,
I have transferred SOP plan to demand management through mass processing...requirements are visible in md63 but they are not showing in MD04..
Thanks
Kumar

Dear Kumar,
The PIR is maintained for the version GP,which is not active,as suggested either you should maintain
the PIR for this version as active or else for the version 00(SAP standard).
Regards
Mangalraj.S

Sales Order number is not showing in MD04

Hi Gurus ,
I have got one case where Sales order number is not showing in MD04 screen . This sales order , line item has already delivered , PGI & billing document also been generated . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen because at the time sales order creation availability check “01” was maintained which has sum up all the requirement in one particular day ( Also as
per SAP note -70408) .
Now because all the subsequent document has been generated for sales order so we can not mark it for “Rejection for rejection “ & to create new sales order with availability check “02” in material master .
Please let me know the possible solution for the same or if any sap note would be required to get the sales order number in MD04 .
Thanks ,
Aman

Hi Kiran ,
Actually before running the report in “SDRQCR21” in PRD I wanted to run it in “Quality “ .
In quality I am not able to simulate the same .
Please refer below points related to my testing result .
1.Mainatined availability check group “01” .
2 . Created Sales order
3. Check in MD04 screen & as expected sales order was coming blank with negative Qty .
4. Run the MRP which generated PR
5. PR converted to PO & GRN was done which updated the stock
6. Created delivery & checked the same in MD04 . It was also coming blank . No delivery document numbe was showing in screen but it was coming with negative Qty .
7. Done the PGI & blank delivery document number was removed & it become normal .
In PRD .
There are 3 sales order
One sales order is already marked reason for rejection & two sales order delivery , PGI has been done .
But still it is showing blank sales order with negative Qty & after MRP run it is generating the PR also .
I don't why it was showing with negative values .
Please refer attacehed screen shot .
Thanks,
Regards ,
Aman

Email address change not showing on ipad after sync

iTunes email address change not showing on ipad after sync

So change it.
Open iTunes, scroll to the bottom of the main page, tap your account name, log out then sign in with the correct name.

I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

iOS: Device not recognized in iTunes for Mac OS X

BAPI_DOCUMENT_CHECKIN2-Status does not allow you to change certain data

Hi Gurus,
I am uploading the DIR attached files for the Documents in PLM. We have a custom program written to upload the attached files. When I tried to upload the file I am getting the BAPI Return error as "Status does not allow you to change certain data". The status of all the documents is "RL"
File format is
Doc type Document No Rev File Name
JPS 0021581PS, X, /in/PLM/JAPAN/Files/0021581PS.xls
Please help me I need to upload the data.
Thanks,
Deepthi

Check the status network for your doc type in config. You may find that the current status may not allow you to make changes. You may need to change the current status to another status before you can make the changes you would like.
The config settings will tell you the status you may set in order to make your changes, if they are allowed.

Albums not showing in library after import

Just install iTunes 10.4.1.10 on Win XP (have same issue on Win 7) it auto added my music folder but its all messed up due to filenames etc so I deleted everything from library with the intention of manually importing everything. Albums are not showing in library after going File -> Add Folder to Library...
Any ideas?

Note that Pause and Resume can be found in the right-click context menu of an item (toolbar drop-down list).
Do you have the .part file or only the (final) file with a byte count of 0 bytes?
If the .part file and doesn't have the expected file size (2 GB) is missing then you won't be able to resume this download anyway. You can check the temp folder as well.

Not showing company list after installing B1 2007 on windows 2003 standard

Hi gurus,
I am facing a problem regarding B1.System not showing company list after installing B1 2007 on windows 2003 standard edition.
Plz help me.
Thanks in advance
Regds
Maddy

Hi Maddy,
Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
Vasu Natari.

Schedule agreement not showing in MD04

Hi All
We have a schedule agreement created and its not reflecting in MD04. According to the thread i changed the avl check to 02.
But its still not showing in MD04. So my question is do I have to do any other thing so that the avl chk change will get affected for same schedule agrmnt or I have to create a new one so that it will show in MD04.
Thank You.

First you need to identify what schedule line category is flowing in your sale order. Normally, this would be CP. So next go to VOV6, select the schedule line category and execute. There tick the box for "Req./Assembly"
thanks
G. Lakshmipathi

PO not showing in MD04

Hi
I created PR to PO. Po created with account assignment category c-sales order and item category s-third party. My question is PO or PR not showing in MD04.
Please can anybody suggest?

Hi,
Please check whether your PO and PR really exist for the plant, material you are speaking about.
You can check in VA03 in document flow whether the mentioned PR, PO really exists.
If it is so, you should see both PR and PO on MRP list. Start MD04 again > please check whether you gave proper material, plant, MRP area in MD04 > click on refresh button.
Please check organisational levels (used in MD04 and used in your PR/PO)! Please also check whether there's deletion indicator on the PO / PR.
Can this help?
BR
Csaba
Edited by: Csaba Szommer on Jul 22, 2008 2:12 PM
Edited by: Csaba Szommer on Jul 22, 2008 2:13 PM

Query to adpatches applied after certain date

Hello,
would anyone help me in select a query to find all adpatches applied after certain date?
for example all adpatches applied after jan 2010.
thanks in advance

Hi,
Query AD_BUGS table (CREATION_DATE column) -- See eTRM for details about the table.
eTRM
http://etrm.oracle.com/pls/etrm/etrm_search.search
You could also get the same from OAM.
Thanks,
Hussein

Infostructure S502 not updated after certain date

There is an infostructure S502. It is not updated after a certain date.
It should be updated after saving in C011N.
This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.

I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
Is it because of some setting in MC23?

SP02 showing update was terminated and not showing Spool no and other data

Hi Friends,
Can anyone guide me in the below problem
After going to change mode of transaction when i go to message and i have done repeat output and further data and communication methods.
After that i have saved document.
After that when i enter into transaction SP02 it is showing that update was terminated.it is not showing the Spool number and the other data in the screen.
it is showing a message that List contain no data.
plz help me how to proceed and what r required for this problem.
and plz say me how can we get the unit test reports for the developments

Hi
I've checked in the program before calling BAPI_TRNASACTION_COMMIT if it returns any erros after BAPI_INCOMINGINVOICE_CREATE. It will check any missing data. The error happends only if I tried to post a blanket order with multiple items. With single item, it's working fine. The data are correct. I'm wondering what causes this error.

PIR not showing in Md04 after certain date

Similar Messages

Maybe you are looking for