PIRs not shown in MD04

Hi Experts,
I have created Planned Independent Requirements (PIR) to the material but which are not reflected in Stock Requirement List (MD04). What could be the reasons?
Best answers will be rewarded.
Thanks & Regards,
Surya
9000440032

Hi,
1) You need planning file to be created before MRP run
2) You need to have correct requirement type, just set this in MD61, MD62. Meanwhile strategy type be ignored
3) You need to set the active indicator in the demand management for your item to run MRP. MRP will point at the active to generate all the plannings.
4) PIR will be generated and there come along with planned order / Purchase requisitions after the run depending on the availability check (daily or individual).
Thanks.
Regards,
Andrew

Similar Messages

Material is not shown in MD04.

Hi Friends,
We have created a Sales order for some materials. All the materials are subjected to MRP. In mateial master We maintian all Except MRP group. Also we maintain the Requirement type etc with respect to the Mateial Type in configuration. In our case when we created the Sales order some of material are picking the requirement and same was shown in MD04 also in availbility check we can able to check the reqirement but some of the msaterials no requirement generated in availibility and not shown in MD04. All the materails are belongs to material Type FERT. Let me know some materials are not Picking the requirement and not shown in MD04.
When we maintain the MRP Group the materials were picking the requirement in availbility and alos shown in MD04.
Will anone explain the difference between the both setup like Picking requirement with respect to Material Type and Picking Requirement with respective to MRP group etc. aslo when and where we can user those things
Regards
Palani

Requirements of sales orders are transferred to MD04 based on the item category.
In SPRO/IMG:
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Determination of Requirement Types Using Transaction
In here, you set a requirement type for each item category. Without a setting here, the requirements do not display in MD04.
Hope this helps.
Gina

PIR not showing in Md04 after certain date

Hi
The PIR's are coming from LTP.
The PIR's which are created after 03/2015 are not showing in MD04
MRP run back ground with NETCH still why PIR's are not showing?
What settings I have to check..
Regards,
Srihari.M

Please check the following :
1.If you have done splitting of the required qty during PIR creation . , please check in MD62 whether , you have un-checked the Active Version for some of them .If those qty. are falling after 03/2015 , then it will not pop up in MD04
2.While creation of PIR , if the planning period is beyond planning horizon , it will flag you a message and requirement will not display in MD04 , then check the same in OMPD and compare with planning period.
Regards
JH

Requirements for few periods not shown in MD04

PIRs for a materials are not flowing to MD04 list for 04 and 05 periods, it is not showing any PIRs in MD04 though we create requirements in MD62 for these periods, but from 06 onwards it is showing PIRs properly.Can you Please let me know where should we check to get the cause for this error?

Veesh,
Are the Versions for the period 04 & 05 same as Period 06. Please not only active Version of the PIR would be displayed in MD04.
Regards,
Prasobh

Sales order not shown in MD04 and product view

Hi All,
Sales order is created,but its not showing in MD04 and RRP3,The material type is X0.
I checked the status of the sales order that is blocked for authorization,Is there any other reason for this.
Regards,
Prabhu

Hi,
In the sales order, please check the item category in the schedule lines.
If the item category is CN, then you cannot see the requirements in MD04.
The item category is determined from the MRP type set in the material master. Since it was ND earlier, the Item category in the sales order became CN.
Had the sales order been created after changing the MRP type, the Item category would have been CP and you can see the requirements in MD04.
You can change the item category in the schedule line to CP and the requirements will be transferred to MD04.
Once they are in MD04, they would automatically come to RRP3, provided the material exists in the active integration model.
Regards,

LP type delivery not shown on MD04

Why LP type delivery document is not visible on MD04 screen? and can we make it visible?

Hi,
Sure, that is why it is worth checking it is correct.
A selection rule consists of certain MRP elements and stocks that are grouped together to a rule. Only the MRP elements that are selected in the selection rule are displayed, of the MRP elements that are displayed, only those flagged as relevant to availability in the selection rule are used to calculate the quantity available and the ranges of coverage. Only the stocks defined in the selection rule are used to calculate unrestricted-use stock, etc
The display filter controls the display of the MRP list and the stock/requirements list. The system displays MRP elements only in the time period defined in the display filter. Within this period, the system displays MRP elements only for the segments selected in the display filterm so check your filter setting, deliveries could be excluded. This reduces the data in the list to a clear selection.
Also, check that define MRP views has not been populated, this could affect user views.
Thanks.

Delivery not shown in MD04

Hello,
I have created STO with UB document type and created a dely in supplying plant.
STO is displayed in MD04 in both the plants before delivery.After delivery is done it is not displayed in supplying plant but STO PO is displayed in receiving plant.
Actually delivery to be displayed in supplying plant untill PGI is done but some how it is not displayed for few items.
Helpful answers will be rewarded.
regards
suresh

Hi,
Sure, that is why it is worth checking it is correct.
A selection rule consists of certain MRP elements and stocks that are grouped together to a rule. Only the MRP elements that are selected in the selection rule are displayed, of the MRP elements that are displayed, only those flagged as relevant to availability in the selection rule are used to calculate the quantity available and the ranges of coverage. Only the stocks defined in the selection rule are used to calculate unrestricted-use stock, etc
The display filter controls the display of the MRP list and the stock/requirements list. The system displays MRP elements only in the time period defined in the display filter. Within this period, the system displays MRP elements only for the segments selected in the display filterm so check your filter setting, deliveries could be excluded. This reduces the data in the list to a clear selection.
Also, check that define MRP views has not been populated, this could affect user views.
Thanks.

How can make PIR in period of adjustment not visible in MD04

Dear guru ,
I have defined a period of adjustment for planned independent requirements.
These pir are visible in MD04 but they arenu2019t influent for mrp.
I want to make these pir not visible in MD04
I donu2019t want to delete the pir because I want to maintain history of planned and withdrawn quantity.
How can I do that ?
Thanks is advance.

Hi,
A suggestion:
Split the requirements into 2 lines (i.e. 2 versions), one line which is active, but does not contain the requirement which you do not want & the other which is not active & contains the reqmt which you do not want in MD04.
Regards,
Vivek

Scheduling agreement number is not shown in the MD04

Dear all,
The scheduling agreement number is not shown in the MDO4 screen for the material x.
when i check the mrp data for availabiity check as 02 .
if i copy line item of the material in same SA , and enter the forecasting line, system showed in the MD04 for the SA number
Pls help me out to find out the reason.
thanks
vbraj

Dear,
Thanks for your reply.
i checked the assigned schdule line catogry as L2 and it have the tick mark over the Req / Assmbly.
anyother reason?
Thanks

PIR visible in MD63 but not showing in MD04

Hi,
I have transferred SOP plan to demand management through mass processing...requirements are visible in md63 but they are not showing in MD04..
Thanks
Kumar

Dear Kumar,
The PIR is maintained for the version GP,which is not active,as suggested either you should maintain
the PIR for this version as active or else for the version 00(SAP standard).
Regards
Mangalraj.S

Sales orders not appearing in MD04

Hi,
Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could be the reason and how to resolve such thing.
regards
sachin

sachin arora wrote:>
> Hi,
>
> Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could be the reason and how to resolve such thing.
>
> regards
>
> sachin
Hi Sachin,
MD04 is the stock requirement listing.
Normally it would not list general sales order that is Make to STOCK scenarion. It would not list those sales order as that requirment is taken care by PIR (planned independant Requirment).
However in scenarios like MTO (Make to Order) or Plan to assemble to name a few. MD04 will list the sales order.
For that you need to change the STRATEGY GROUP in Material Master to Planning with Asembly or Make to Order in MRP3 Tab.
Once you save the sales order for such a material it will get listed in MD04.
Hope it helps.
Thanks & Regards
Abhishek Swarup

SubReq not shown in MS04

Hi Gurus
I have created a plnning scenerio for LTP and completed the MRP run for material X, in MS04 for that material I am not seeing the sub contracting requirements from its parent material Y. The subcontracting requirements "SubReq" of Y is shown in MD04 of X but not in MS04.
In above example the Y is subcontracted materials and X is component used for Y, means X is component in BOM of Y.
Where to be check, please help.
Edited by: Nethi Venkata Ramana on Nov 3, 2008 3:47 PM

Hi
Appreciate your response in this regard.
Is there any SAP note or some notes where I can get this information. Because we have a production issue on this, I agree it is true but how to present to customer.
Regards
Nethi

Materials not shown in MD4C

hi there SAP Gurus,
i have a problem with MD4C, where not all the materials in the BOM is not shown in the MD4C report,
wheni check with md04, the material is there, but when i check with md4c the material is not shown there,
why the md4c not showing the material?
thank you.
vasan

Hi,
In MD4C you cannot find consumption based planning materials(MRP type- Reorder related) even though they are present in BOM.
Regards,
Krishna Mohan

Delivery deleted but requirements are still shown in MD04

Hi Gurus,
I have an issue , where the item has been deleted from the delivery . However the requirements for the material are still being shown in MD04. I want the requirements should be removed from MD04.
Please help me in resolving this issue.
Thanks in advance.

Once the sale order is created and saved, the requirements will be transferred to MD04 which means, through sale order, you are asking the system to consider those requirements for production.
In the same way, if you delete a delivery document, it will not be passed on to MD04. In order to remove those requirements from MD04, go to VA02, input the sale order reference against which you have created and deleted the delivery and execute. There assign Reason for Rejection for those line items and save.
Now again go to MD04 and refresh it and see how it works.
thanks
G. Lakshmipathi

Sales Order Items does not appear in MD04 after BAPI_SALESORDER_CHANGE

Hi Gurus,
I have this scenario.
1)Create sales order with 3 items.
2)Check in MD04. All items are there.
3)Assign reason for rejection for all the items.
4)Use BAPI_SALESORDER_CHANGE to remove the reason for rejection.
5)Only the first item can be shown in MD04.
Do you have any idea how can #5 happen?
Thanks and Best regards,
Andre

Thanks for the replies.
@ A.L.V Ramana,
Yes they all have confirmed qty. The one thing I noticed is that only the first item is being saved to table VBBE from which MD04 is getting sa sales documents. Is there any condition that must be met in order for this table to be filled except that if the item has reason for rejection or does not have confirmed qty?
@ Anirudh.vb
Thanks for the suggestion but the users wants a real time update on MD04.
Best regards,
Andre

PIRs not shown in MD04

Similar Messages

Maybe you are looking for