PIRWBUSER / not enough Permissions / SLD Registration / Adapter Engine / PI

Hi Community,
i have a Problem. I go to the SLD Registration in the RWB
When i click on Adapter Engine and Register i become the Message
Adapter Engine P11 (HOST): Unable to get Adapter Engine instance and read the data from SLD; details: Cannot connect to component Adapter Engine P11 (HOST); user PIRWBUSER does not have sufficient authorization to call servlet at URL http://HOST:50000/AdapterFramework/regtest.
My PIRWBUSER has the following Roles:
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
Can someone help here?
Regards
Bjoern

Hello!
Apply the note below according to your system version:
999962 - PI 7.10: Change passwords of PI service users
936093 - XI 7.0: Changing the passwords of XI service users
721548 - XI 3.0: Changing the passwords of the XI service users
If not worked, try working with the SAP_ALL and check if works.
Regards,
Caio Cagnani

Similar Messages

Adobe flash player "Installation failed. Not enough permissions to write disk"

Hi there, my adobe flash player keeps on having issues. I downloaded the install file, open it and click install and it instantly fails and comes up with this message.
"Installation failed. Not enough permissions to write disk". Any ideas?

I think 2 options:
- try repair disk permissions
- try to do a flash clean install (https://forums.adobe.com/thread/1267823)

Running netctl as root but dhcpcd not enough permissions

I'm trying to get my Arch working with eduroam, using netctl and following netctl-eduroam's example.
However, I get a failure if I run
sudo netctl restart eduroam
looking at the journalctl, I see:
Sep 08 07:53:11 bluerocket dhcpcd[314]: dhcpcd will not work correctly unless run as r
Sep 08 07:53:11 bluerocket dhcpcd[314]: open `/run/dhcpcd.pid': Permission denied
Sep 08 07:53:11 bluerocket dhcpcd[314]: control_start: No such file or directory
Sep 08 08:38:09 bluerocket dhcpcd[7823]: dhcpcd will not work correctly unless run as
Sep 08 08:38:16 bluerocket dhcpcd[315]: wlp0s26u1u4i2: if_init: Permission denied
Sep 08 08:40:40 bluerocket dhcpcd[315]: usb0: up_interface: Operation not permitted
Sep 08 08:40:40 bluerocket dhcpcd[315]: usb0: if_init: Permission denied
Sep 08 08:40:40 bluerocket dhcpcd[315]: enp0s26u1u2: up_interface: Operation not permi
Sep 08 08:40:40 bluerocket dhcpcd[315]: enp0s26u1u2: if_init: Permission denied
Sep 08 08:41:36 bluerocket dhcpcd[315]: enp0s26u1u2: if_init: Permission denied
Why does dhcpcd not have enough permissions if I ran netctl as root?

c2hollow wrote:
I'm trying to get my Arch working with eduroam, using netctl and following netctl-eduroam's example.
However, I get a failure if I run
sudo netctl restart eduroam
looking at the journalctl, I see:
Sep 08 07:53:11 bluerocket dhcpcd[314]: dhcpcd will not work correctly unless run as r
Sep 08 07:53:11 bluerocket dhcpcd[314]: open `/run/dhcpcd.pid': Permission denied
Sep 08 07:53:11 bluerocket dhcpcd[314]: control_start: No such file or directory
Sep 08 08:38:09 bluerocket dhcpcd[7823]: dhcpcd will not work correctly unless run as
Sep 08 08:38:16 bluerocket dhcpcd[315]: wlp0s26u1u4i2: if_init: Permission denied
Sep 08 08:40:40 bluerocket dhcpcd[315]: usb0: up_interface: Operation not permitted
Sep 08 08:40:40 bluerocket dhcpcd[315]: usb0: if_init: Permission denied
Sep 08 08:40:40 bluerocket dhcpcd[315]: enp0s26u1u2: up_interface: Operation not permi
Sep 08 08:40:40 bluerocket dhcpcd[315]: enp0s26u1u2: if_init: Permission denied
Sep 08 08:41:36 bluerocket dhcpcd[315]: enp0s26u1u2: if_init: Permission denied
Why does dhcpcd not have enough permissions if I ran netctl as root?
mhm... instead trying with sudo, maybe open a # shell and give the netctl command there?
edit: also, check https://bbs.archlinux.org/viewtopic.php?id=171165
Last edited by s3kt0r (2014-09-10 14:54:02)

ADAPTER engine not found in runtime work bench

Hi Experts,
I am not able to see the adapter engine in the component monitoring in RWB .
What may be the probelm ?
Thanks in advance and best regards,
Anil

Hi Anil,
The adapter needs to register itself in SLD.
For this there is template task which should have done this automatically. If not the Basis team could trigger the self-registration of adapter engine in visual admin.
For more info refer to the link
[Adapter Engine Self Registration|http://help.sap.com/saphelp_nw70/helpdata/en/43/8dde24cbdc6353e10000000a11466f/frameset.htm]

Adapter Engine Not Showing up in SXI_CACHE

Hi,
The adapter Engine is not showing up in the Transaction SXI_CACHE and also when i create a RFC comm channel it is not showing up in the Adapter Engine Dropdown.Can anyone let me know whether these both are linked and is there any way to rectify the same ?
Regards,
Kittu.

Hi Kittu,
try restarting the J2EE Engine. This should register the AE with the SLD.
If that does not work then check there are not SLD inconsistencies,
i.e.,
#764176 Error in XI due to inconsistent SLD contents
If that does not help try calling the FM - SAI_AE_DETAILS_GET
e.g.
TCODE
SE37
SAI_AE_DETAILS_GET
 Import parameters Value
AE_NAME AF.<SID>.<IS Hostname>
BYPASSING_CACHE X
The result should be something like
Export parameters Value
AE_MSG_URL http://<IS Hostname>:<J2EE port>/MessagingSystem/receive/AFW/XI
IS_SERVICE_USER_NAME XIISUSER
IS_SERVICE_USER_PASSWORD
WAS_CACHED
and the AE should be listed in
TCODE
 SXI_CACHE
 -> GoTo AE Cache

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

Adapter Engine Not found in ID

Hi folks,
While creating a communication channel for File adapter the field for Adapter Engine is blank
I followed this link
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Business system was not there. so I tried creating a WEB AS ABAP acc. to this blog.
I got the following error :
CIM_ERR_FAILED 
Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
however it's creating a Business System. but I am not able to find the adapter engine in ID.
Reagards,
Sachin

Thank you folks for your prompt replies.
My problem is solved... The reason was the Business System was not created properly.
Thank you
Sachin

Installation and then Configuration of Plain J2se Adapter Engine

Hi All,
Actually we want to use JMS Adapter for that we had installed Plain J2SE Adapter Engine but after installing and following the initial steps of Adapter.pdf we are not able to access the Adapter Engine through URL.We are using the URL http://<hostname>:8200/MessagingSystem/receive/AFW/XI
this URL is there in our SLD but we are not able to access the page.
So Please can somebody help me to resolve this issue.
Thanks & Regards
Sathya

Hi Amol,
I am trying to send read data from MQSeries using JMS adapter. We are successful in opening the Adapter Engine and the GUI. We have cofigured the adpter as follows. But when we try to restart the adapter to get the changes get saved we are getting the following error
"ERROR CALLING THE RESTART ADAPTER"
Also status is shown is yellow and version is shown as not set.
Where ever I have changed the configuration data I have shown it in bold
JMS-Adapter Configurarion
This Configuration is a sample for a JMS sender channel (inbound, sends to XI IS)
Set XI message protocol version. This sample is designed for XI 3.0
version=30
JMS message receiver class
classname=com.sap.aii.messaging.adapter.ModuleJMS2Transport
set if a transacted JMS Session should be used (default: true)
#JMSSession.sessionTransacted=false
set delay in milliseconds before processing next message after an error (default: 0)
errorDelay=10000
#set delay in milliseconds before trying to reestablish the JMS Connection after a connection error (default: -1 (do not try to reconnect))
#reconnectDelay=10000
set the Message Formats you want to process (Formats only needed if they can not be evaluated at runtime)
TransportMessage Type can be set to TransportMessage of XMBMessage. It is used for sending and receiving Transport and XMBMessages
#TransportMessage.type=TransportMessage
TransportMessage.type=XMBMessage
uncomment and adjust parameters for Transformation Type (Binding of JMS-Transport Message),
insert your class here for an individual binding between JMS and Transport Message
uncomment the following line for using Bindings that belong to Tunneling
#transformClass=com.sap.aii.messaging.adapter.trans.JMSTunneling
uncomment the following line for using Bindings that belong to Single Payload Binding
transformClass=com.sap.aii.messaging.adapter.trans.JMSSinglePayloadBinding
ID Garbage Collector: For EO(IO) handling XI adapters store the JMS/XI message ID's in the ID logger
Uncomment the following lines and change the default values if you recognized "out of memory" problems due to
very large ..\tech_adapter\Data\*_ID.dat files which will be kept in the memory as well
eoExpirationAfterDays is the period of keeping the message ID in days. Afterwards the message ID might be used again
garbageCollectorInterval is the period in milliseconds when the ID garbage collector is started. It will however only
be started if messages are exchanged otherwise ID logs won't be created anyway
eoExpirationAfterDays=365
garbageCollectorInterval=86400000
#
the following parameters are used in some Bindings that belong to Single Payload Binding needing XMBHeader Information
uncomment and adjust parameters according your requirements. Please note, that the party identfier needs not to be
configured in case of A2A scenarios.
#XI.SenderParty=Sender
XI.SenderService=MQSeries
#XI.ReceiverParty=Receiver
XI.ReceiverService=MTX
XI.InterfaceNamespace=http://xitest
XI.Interface=MI_Out_File
XI.TraceLevel=1
XI.LoggingLevel=1
XI.QualityOfService=EO
XI.QueueId=ABCD
XI.ContentType=text/xml
# *************************************************************************************************************
#
URL of XI IS to send the messages to
XI.TargetURL=http://bwxi:50000/sap/xi/engine?type=entry
XI.User=XIAF
XI.Password=XIPASS
# *************************************************************************************************************
URL of file adapter if a loopback JMS to File should be configured
XI.TargetURL=//localhost:8210/file/receiver
# uncomment the following settings if needed (independent on JMS provider)
JMS.QueueConnectionFactoryImpl.user=xisuper
JMS.QueueConnectionFactoryImpl.password=xxx
#
uncomment and adjust parameters for loading JMS administrated objects via JNDI
uncomment and adjust parameters if not the default context should be used
#JNDI.InitialContext.property.1=java.lang.String {javax.naming.Context.INITIAL_CONTEXT_FACTORY}, java.lang.String com.sap.engine.services.jndi.InitialContextFactoryImpl
#JNDI.InitialContext.property.2=java.lang.String {javax.naming.Context.PROVIDER_URL}, java.lang.String localhost:50004
#JNDI.InitialContext.property.3=java.lang.String {javax.naming.Context.SECURITY_PRINCIPAL}, java.lang.String Administrator
#JNDI.InitialContext.property.4=java.lang.String {javax.naming.Context.SECURITY_CREDENTIALS}, java.lang.String sap
set the Lookup Names
#JMS.JNDILookupNameQueueConnectionFactory=jmsfactory/default/joetest
#JMS.JNDILookupNameQueue=jmsQueues/default/sapDemoQueue
uncomment and adjust parameters for loading JMS administrated objects from filesystem ***
#JMS.FileNameQueueConnectionFactory=SAPQueueConnectionFactory.ser
#JMS.FileNameQueue=SAPQueue.ser
uncomment and adjust parameters for creating SonicMQ JMS administrated objects ***
JMS.QueueConnectionFactoryImpl.classname=progress.message.jclient.QueueConnectionFactory
JMS.QueueConnectionFactoryImpl.constructor=java.lang.String localhost:2506
JMS.QueueImpl.classname= progress.message.jclient.Queue
JMS.QueueImpl.constructor=java.lang.String SampleQ1
# uncomment and adjust parameters for creating MQSeries JMS administrated objects ***
JMS.QueueConnectionFactoryImpl.classname=com.ibm.mq.jms.MQQueueConnectionFactory
JMS.QueueConnectionFactoryImpl.method.setHostName=java.lang.String BWXI
JMS.QueueConnectionFactoryImpl.method.setChannel=java.lang.String JAVA.CHANNEL
JMS.QueueConnectionFactoryImpl.method.setTransportType=java.lang.Integer {com.ibm.mq.jms.JMSC.MQJMS_TP_CLIENT_MQ_TCPIP}
JMS.QueueConnectionFactoryImpl.method.setQueueManager=java.lang.String QM_BWXI
JMS.QueueImpl.classname= com.ibm.mq.jms.MQQueue
JMS.QueueImpl.constructor=java.lang.String postcard
JMS.QueueImpl.method.setTargetClient=java.lang.Integer {com.ibm.mq.jms.JMSC.MQJMS_CLIENT_NONJMS_MQ}
# *************************************************************************************************************
uncomment and adjust parameters for using a dispatcher ***
#Dispatcher.class=com.sap.aii.messaging.adapter.ConversionDispatcher
#Dispatcher.namespace=namespace1
#namespace1.ConversionDispatcher.logPayload=true
#namespace1.Service.1=Plain2XMLService
#namespace1.Plain2XMLService.class=com.sap.aii.messaging.adapter.Conversion
#namespace1.Plain2XMLService.xml.conversionType=SimplePlain2XML
#namespace1.Plain2XMLService.xml.processFieldNames=fromConfiguration
#namespace1.Plain2XMLService.xml.fieldNames=a,b,c
#namespace1.Plain2XMLService.xml.fieldSeparator=;
#namespace1.Service.2=XSLTService
#namespace1.XSLTService.class=com.sap.aii.messaging.adapter.XSLTConversion
#namespace1.XSLTService.XSLTConversion.XSLTFileName=Data/DemoConversion.xsl
Can you please help me in resolving the error.
Regards,

Unable to start the plain J2SE Adapter Engine

Hi All,
Eariler i was able to start the Adapter Engine. But i dont know what went wrong, i am not able to start the adapter engine.Is there any way to find out what went wrong?
Regards
Sathya
Message was edited by: Sathya Priya

Make sure you have write permissions to your log files and that you have permissions to start the Engine.
Also check your JAVA_HOME path by typing set in windows and env in unix systems.Make sure it points to your java installation directory lib and bin files.
Your ADAPTER_HOME should also contain all jars required or the absolute path to these jars need to be defined in your run_adapter_*. Not to sure if you are running windows or a unix box.
Regards
Robert

Unable to Find out Adapter Engine in the Communication Channel

Hi Experts,
I am Unable to select the Adapter Engine As Integration Server in the File Sender Communication Channel.
Please Let Me Know
Regards
Khanna

HI Khanna
Check the SLD that Adapter Engine is insatlled and all the adapter has the metadata there.
Go to Transaction Code SXI_CACHE in the Inetgration Server(XI- ABAP stack) Then you can see the list of components.
Just have a look into Menu Bar - in there goto : GoTo->Adapter Engine Cache ( if the status is green - then it is correct-otherwise you need to refreshit.)
You just go thru mentioned document from service.sap.com/nw04
You will get the full info about that.
/people/michal.krawczyk2/blog/2005/09/07/xi-why-dont-start-searching-for-all-errors-from-one-place
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
Just try with Visual Administrator to check the services for the adapter engine are running or not
All services starts with SAP XI..
SAP XI AF Core
SAP XI AF CPA Cache
SAP XI AF Messaging
SAP XI Adapter XI
SAP XI AF Security
Check SAP note on CPACache- 741214 and also 824236.
Let me know if any errors..
Cheers..
Vasu
** Reward Points if found useful **

RFC adapter - AE_DETAILS_GET_ERROR - no adapter engine

Hello,
have a strange error.
Our scenario connects two R/3 systems via RFC adapter (outbound / inbound) for an RFC in a standard R/3 function module SUSR_ZBV_GET_REMOTE_PROFILES.
The RFC is synchronous.
When starting the RFC call from the sender system the error message in the trace is "exception while reading from SLD:Property sap_xiadapterservice.adapterType does not exist".
Message in RWB:
"Transmitting the message using connection http://abc038.ceu.test.com:8077/sap/xi/engine?type=entry failed, due to: XIServer:AE_DETAILS_GET_ERROR:Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines."
- SLD connection is working
- Vis.Admin.: no problems found
(SAP RFC adapter active)
- Component monitoring: no errors
- all rfc connections checked: ok
Does anybody have an idea, how to fix that?
Best regards
Dirk

Hello Dirk and all posters,
We get the same problem just as you described.
We also see no entries in the sxi_cache part for the adapter engine which indicates a problem in getting AE metadata from the SLD.
I see we are all not alone so i believe SP12 is the cause for the problem.
We have another SP11 system that works well.
We tried all those things to understand the problem:
1. look at the structure of the calsses maintained in the SLD to make sure the property "adapterType" exists.
2. Checked the log of the SLD with level "Finest" to make sure the data for the property is sent - all OK.
3. Try to completely delete SLD and reimport CIM 1.4 and CR content 2.0 - all the latest from the web - problem still exists.
4. Put a huge trace on the RFC gateway in the ABAP engine to make sure all XML data is received from SLD server including specific proprty. all ok.
5. Of course we made sure all caches are refreshed, access to SLD is performed all right (logs, traces).
6. Try to disable SM59 entry: SAPSLDAPI and look at the trace in SXMB_MONI. It shows error of connection of course instead of the error of the non exsitene property. But it still shows the error for not getting the access data - so this is only a side affect of the real problem.
Now, as you can see we turned the system from inside out.
I beleive the problem is SAP's problem regarding the parsing of the COM model in the CIM client. I believe that if i could debug the actual abap that parses the XML in the ABAP WAS i would find the problem - i could'nt find a way of debugging the actual processing of a message in QRFC so i'm stuck here.
- Does all of you who have the problem has SP12 ?
- Does any one have an idea of anything else we can all check ?
Good luck for us all :->
Yoad Snapir.

In the XI Szenario i cannot assign Adapter Engine in Communicationchannel

Hi There,
i have a new problem. I imported now the whole Scenario from my XI Cons System into the XI Prod System.
After that i have to reconfigure the Communication Channels.
URL etc.. but in Prod System i cannot Assign Integration Server to Adapter Engine..
i maked a screenshot so you cann see what i mean:
(If you cannot see the screenshots.. please provide me a Mail Adress.. then i can send them to you)
This is our Consolidation System:
http://img16.imageshack.us/img16/7546/xik1.jpg
You see what i mean in the read mark.
And here you can see our Prod System.. i cannot Assign here the Integration Server...
http://img14.imageshack.us/img14/4581/xip1g.jpg
Can you tell me whats wrong here?
Thanks
Bjoern

Hi,
please check this threads, this may help you
Can not select Integration Server for Adapter Engine in File adapter
No Integration Server under Adapter Engine at Communication Channel config
Regards,
pradeep A.

Messages got stuck in Adapter engine

We are doing http to RFC sysnchronous scenario
Message got stuck in adapter engine.so we are getting 500 HTTP timeout error in Http client.
Please help us to find why messages got stuck in Adapter engine.
Below Adapter engine audit log message is pasted for your reference.
Audit Log message:
Time Stamp Status Description
26.09.2008 06:33:54 Success Message successfully received by messaging system. Profile: XI URL: http://devsap01:51000/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
26.09.2008 06:33:54 Success Using connection RFC_http://sap.com/xi/XI/System. Trying to put the message into the request queue.
26.09.2008 06:33:54 Success Message successfully put into the queue.
26.09.2008 06:33:54 Success The message was successfully retrieved from the request queue.
26.09.2008 06:33:54 Success The message status set to DLNG.
26.09.2008 06:33:54 Success Delivering to channel: RFC_out_Test
26.09.2008 06:33:54 Success MP: entering
26.09.2008 06:33:54 Success MP: processing local module localejbs/RfcAFBean
26.09.2008 06:33:54 Success RFC adapter received a synchronous message. Attempting to send sRFC for ZFTestRFC
26.09.2008 06:33:54 Success RFC adapter received a synchronous message. Attempting to send sRFC for J2EE_GUEST
ime Stamp Status Description
26.09.2008 06:56:15 Success MP: leaving
26.09.2008 06:56:15 Error Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired.. Setting message to status failed.
26.09.2008 06:56:15 Error The message status set to FAIL.
26.09.2008 06:56:15 Error Returning synchronous error message to calling application: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired..
Kindly advise us on this issue.

Hi krish,
when i send a http request it got stuck in adapter engine with status "delivering" for some time....
We found that RFC got successfully executed in R/3 system but the synchronous message is not delivered to PI.since adapter engine message is having status "delivering"
after some time we got adapter engine message status as "cancelled with error"
Error is Message expired exception which you can see audit log message I have pasted in my previous post.
Meanwhile we also got HTTP timeout error in Http client.
Could you please tell me why it got stuck in Adapter engine with status "delivering" since RFC is executed successfully.
Why we are not getting synchronous message reply back to PI?

Message archiving in adapter engine

Hello Gurus,
We have successfully configured message archiving in the integration engine via all the sap documentation and sdn blogs.
For the archiving in adapter engine, we have followed the documentation as well however our messages are simply not being archived in the adapter engine.
The steps for AE we took are as follows:
1. goto DataArchivingService/DAS and created an archive store, home path synch and assigned it to an archive path (the ILM browser connects fine as well)
2. created the archiving background job in RWB (both default and a custom one with rules)
The jobs seem to be running fine on our schedule but no messages are being processed. I am assuming the retention period in AE is the one we have set up in SXMB_ADM for IE.
Is there anything we may have missed?

Hi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen.

Option Adapter Engine of SOAP Adapter Sender

Hi, I have a question, I am creating a Communication Channel Type Sender Adapter Soap and note that the combo box Adapter Engine only appears Adapter Engine Central option and watch some examples of internet show Integration Server option and the section Default XI Parameters. It has to do with the version I'm using? or need to configure anything?. The version I have installed is the PI version 7.1.
Thanks for the support.

Hi, if the adapter XI shows the Integration Server. So in version 7.1 is no longer displayed in the Integration Server in the option Adapter Engine?. The problem is that I am leading this link http://www.****************/Tutorials/XI/SYNCASYNC/Page2.htm see image http://www.****************/Tutorials/XI/SYNCASYNC/Page2.76.jpg and not put in the Adapter Engine and XI Default Parameter. Thanks for the help.

PIRWBUSER / not enough Permissions / SLD Registration / Adapter Engine / PI

Similar Messages

Maybe you are looking for