PIRWBUSR - Locked due to incorrect logons

Hello,
after installation of XI 7.0 the user PIRWBUSR is locked due to incorrect logons. After unlock the user an set the password new in the XI (su01), SLD and in the Exchange Profile (com.sap.aii.rwb.serviceuser.pwd) the user is locked in the next minutes. Have somebody an idea, where i must change the password too?
Kind regards,
Markus

Hi Markus,
you can try the following actions:
- connect to http://<server>:<port>/useradmin, enter PIRWBUSER as logon name with the current password, and see if a password change is needed.
- if you are using ONE sld for two system, make sure that the 2 user (PIRWBUSER) have the same password.
Hope this help
Francesco

Similar Messages

User XISUPER locked due to incorrect logon

Hi all,
We are facing one major problem as
Time Ty. Nr Cl. User Tcod MNo Text
00:17:56 DIA 002 700 SAPJSF US1 User XISUPER locked due to incorrect logon
in system log.
We checked all the RFC connections all are fine.
What would be the issue?
Regards,
Shivraj C.
Edited by: Shiv Chalke on Jul 27, 2009 8:24 AM

Hi,
>>>We checked all the RFC connections all are fine.
in most cases such issues are very easy to track
just check out documentation on where the XISUPER is used
for example for SLD access from PI - SLDAPICUST, etc.
so just check it out and you will know in a flash
Regards,
Michal Krawczyk

Locked due to incorrect logons ! (Lock 130)

users are being locked due to incorrect logon attempts, but the usual lock type of 128 for this type of error is not happening.
these users are being locked with 130.
when trying to replicate the problem using a test user on the same system, the account is locked with 128.
any thoughts?

Wolfgang Janzen wrote:>
> ... (and in some future release might no longer possible, due to the ABAP package concept which has become stricter with NetWeaver 7.10).
Thanks Wolfgang!
I have been curious for many months now and have also done some "advertising" with developers. All developers I know agree, but some would like to see it happen first...
We (over lunch etc) were speculating about the call stacks, repid etc and cprog were the main candidates.
Perhaps we were lost in the trees (and tables) and did not see the whole forest...
All people I respect consider this to be a step in the right direction, even if it creates some irritations...
I am sure that SDN can also help to sustainably overcome those irritations.
All the best for 2008 (and release ?) and thanks for all your insights and help to understand the system during 2007!
Kind regards,
Julius

Unlock specified users which locked due to incorrect logon automatically

Hi experts, All users will be locked if he logon incorrectly 3 times in our system now and unlocked in the midnight.
Can I unlock some specified users automatically in specified time I set or is there any method to exclude these specified users to be locked even logon incorrectly 3 times ?
Best wishes,
Evan

>
Rao Evan wrote:
> Hi Alex, thank you for your reply, it seems there is no normal method to do it. Maybe I need ABAPer to help solve it.
>
> Best wishes,
>
> Evan
Hi Evan,
Alex is right: it's worth to clarify (with the auditors) which system behavior is desired before taking any action (in terms of coding). Let me guess: those "special" users are belonging to the "upper management" user group ... - they just don't like the feeling of being "locked out" (even if it was their own fault not to memorize the password). Unfortenately, exactly those users are critical and potentially subject of password attacks (since they are equipped with powerful authorizations).
Maybe it would sense to convince the management to invest in smardcards (at least for that special user group). Using a non-password based user authentication mechanism eliminates the risk of undesired password locks - without imposing other (even greater) risks.
If you still want to implement such automatic unlocking (despite the advice given above) you should write your own tiny ABAP report which then submits function calls to BAPI_USER_UNLOCK and schedule a periodic background job for that report.
Cheers, Wolfgang

User is getting locked due to incorrect password every few minutes SAPJSF

I have gone through solution manager configuration both as myself and as user solman_admin. Recently the Solution manager system was changed to enforce a more complex password scheme. After changing my password, my account is now getting locked every few minutes due to incorrect logon attempts. The System log states that user SAPJSF from Terminal <solution Manager host name> is attempting to login with my userID and is locking it. so far I have made every change I know to make to all the accounts on the JAVA side and to any and all background jobs that are running to remove my userID from these entries. My account still gets locked and I have no idea where to find what task or process is locking the account.
Any ideas would be greatly appreciated.

I have checked the audit log and it is not very helpful. Here are the results
Date Date/Time User Terminal name Transaction Code Program Message Text
11/12/2010 9:29:39 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Password check failed for user BSEWELL in client 001
11/12/2010 9:29:39 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Logon Failed (Reason = 1, Type = U)
11/12/2010 9:29:39 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Password check failed for user BSEWELL in client 001
11/12/2010 9:29:39 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Logon Failed (Reason = 1, Type = U)
11/12/2010 9:29:44 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Password check failed for user BSEWELL in client 001
11/12/2010 9:29:44 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Logon Failed (Reason = 1, Type = U)
11/12/2010 9:29:44 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Password check failed for user BSEWELL in client 001
11/12/2010 9:29:44 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Logon Failed (Reason = 1, Type = U)
11/12/2010 9:31:30 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Password check failed for user BSEWELL in client 001
11/12/2010 9:31:30 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 User BSEWELL Locked in Client 001 After Erroneous Password Checks
11/12/2010 9:31:30 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Logon Failed (Reason = 1, Type = U)
11/12/2010 9:31:30 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Logon Failed (Reason = 53, Type = U)
11/12/2010 9:32:36 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Logon Failed (Reason = 53, Type = U)
11/12/2010 9:32:36 AM SAPJSF wsapvsmsdb.png.loc SAPMSSY1 Logon Failed (Reason = 53, Type = U)

Outbound queue locked due to incorrect password

Hi Gurus,
I'm having a problem to activate an Integration Model as I'm getting an error stating that the outbound queue is blocked due to incorrect password.
I have set up the RFC destination of the SCM ECC logical systems wit a valid user (I tested it). I've changed between using a Dialog user and a Communications Data user. Between every change I made I've cleaned the queue using transaction CFQ1.
Do you have an I idea of what I might be missing?
Many thanks,
Diego

Diego,
It is unclear to me which system you are experiencing the problem on. Either way, the reasons are usually the same. I will address establishing the ECC>SCM link. Works the same way in the other direction.
Every time I have had the problem you are experiencing, I usually find that the fault lies with me, not the system - I have made assumptions that were not correct.
BD54 ensure that your logical system name is what you think it is. Unless you are rigorous in your naming conventions, it is easy to become confused between logical names/hostnames/system names for SCM and ECC, ,
NDV2 ensure that the SCM system is properly identified
SM59 Make sure your IP address, or hostname is right. Make sure the system you are logging onto interactively is the one being accessed in SM59. Make sure you have the right userid. Password is casesensitive on some versions of R/3 and APO, but not casesensitive on others. I always use UPPERCASE text only for PWs, at least until everything is totally debugged.
From a technical standpoint, your RFC userid can be interactive or system, I always start with interactive until the intefaces are totally debugged. You auditors may have an opinion the final settings in the production system in this area..
Rgds,
DB49
I hear and I forget. I see and I remember. I do and I understand.
Confucius

WAS Portal User locked - Due to bad logon

Hi,
Is it possible to adjust user's bad logon attemp in WAS portal 6.4?
If a user enter wrong password more than three time, the system locked that user. It happened three times to admin user. We activated SAP* and unlocked the user.
If any one knows like how to increase the number of wrong password attempt...it would be great.
Thanks,

Hi,
For increasing the logon attempts, you have to follow below steps:
Step 1: Go to <Driver>:\usr\sap\<System ID>\JCxx\j2ee\configtool --> Configtool.bat
ex: C:\usr\sap\Y76\JC03\j2ee\configtool --> Configtool.bat
Step 2: cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
select property : "ume.logon.security_policy.lock_after_invalid_attempts = < Enter Number>"
ex: ume.logon.security_policy.lock_after_invalid_attempts = 6
Step 3: save
Step 4: Restart the Engine.

IPad is locked due to incorrect security answers

Trying to download a movie for flight home. Was asked security questions answers didn't match. Locked out.

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106653)

TS2446 Locked due to incorrect security question asked of me that's not in my profile

You asked me the wrong security question about my password to make purchases so you locked my apple I'd pswd......
Tommika Shinault Wilson

You aren't talking to Apple here. This is a user to user forum. If your ID is locked, contact iTunes store support for assistance: https://ssl.apple.com/emea/support/itunes/contact.html.

Regular blue screen occurance and now bios lock due to incorrect password

Product ID: B6V17PA

You should have gotten a code along with System disabled message. Post that code here
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

User unlock due to Incorrect attempts

Hello Experts,
We are trying to implement a solution where password reset should also unlock users locked due to incorrect attempts in SAP. Is there a way in IDM to identify the lock type of a user
Best Regards,
Mohammed

Hi Mohammed,
Here is my solution, it works, but you will have to add additional task and script to check the status(as well, it will take longer).
Solution:
In your order task group 8. Set ABAP User password(SAP connectors) add additional task(as first task), that will read from SAP(read the islocked - flag(for user lock) and iswronglogon - flag(for password lock) from SAP) and store the data in some temporary table(sap_locked_temp_table....), as well when you are reading the data from SAP you can add a script to check the result and in case of SAP lock - islocked=L, to skip the next task(skip the password change for this system). Keep in mind that you will have to do this check for each system, so in your temporary table you have to keep not only the userid, but and the system in which the user is locked.
But if you want to unlock the password, without unlocking the user, it's not possible, as the flag iswronglogon doesn't work with ToSAP pass, you can only read it.
My solution works in case you want to unlock the password only if the user is unlocked.
BR,
Simona

HT4528 how do I re-activate my phone after its been locked due to attempting an incorrect pass code too many times?

how do I re-activate my phone after its been locked due to attempting an incorrect pass code too many times?

Connect the iPod to its syncing computer and restore via iTunes. If iTunes asks for the passcode and yu can't enter the passcode or you do not have the syncing computer, place the iPod in recovery mode and then restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
recovery mode restore as descibed in HT1808 might be your last resort though

My daughter has disabled her iPhone 4 due to incorrect password. how do i fix

My daughter has disabled her iPhone 4. Due to incorrect password. It shows phone is disabled connect to itunes. It only lets me make
Emergency calls. I have never synced it to computer or anything. Please help me fix. I've been told I have to go to Apple store in Atlanta. Thanks

Open iTunes on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.

My i pod 2 gen is disabled due to incorrect password how do i fix this?

my i pod 2 gen is disabled due to incorrect password how do i fix this?

Follow the instructions here:
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

PIRWBUSR - Locked due to incorrect logons

Similar Messages

Maybe you are looking for