Pismo and Airport card; Card not found

I just got an airport card for my Pismo. The computer cant see the card. What do I need to do to get it to work?
Specs:
PB Pismo G3
728mb Ram
OSX 10.4.11
Airport Card

I figured it out.
For those having the same problem, Make sure your card is installed correctly. The airport card DOES NOT go in the PCI card slot.
Read the correct instructions below.
1. Shut down your PB.
2. Pop open your keyboard.
3. Take off the heat shield.
4. You will see a small black wire just to the right of the PCI slot. This is your antenna.
5. Plug in the antenna to your card and slide the airport card ABOVE the PCI slot, with the serial numbers facing up.
6. Adjust the antenna wire to fit as you put the heat shield back on.
7. Power up and hit ok on the dialog screen saying airport card found.
8. Wait for wireless network to appear in your wireless network and then your ready to go.

Similar Messages

Airport Extreme and Airport Express are not found on the Airport Utility. Internet still works. Huh?

Good People,
I have an Airport Extreme serving as my wireless router with an external hard drive connected to it. I also have an Airport Express in another room connected to a stereo for Airplay. Neither can be found on the Airport Utility (v5.5.3), but wireless internet still works. This happens often, with both reappearing in Airport Utility for short amounts of time periodically. What's the deal? Both the Extreme and Express are less than 6 months old. It's a bit frustrating not getting tunes when you have everything set up right and not being able to use Time Machine consistently.
All recommendations appreciated.
Thanks.

shakeelium wrote:
Good People,
I have an Airport Extreme serving as my wireless router with an external hard drive connected to it. I also have an Airport Express in another room connected to a stereo for Airplay. Neither can be found on the Airport Utility (v5.5.3), but wireless internet still works. This happens often, with both reappearing in Airport Utility for short amounts of time periodically.
I've once had the same problem.
The reason for that issue is the frequency (radio band) hopping of the station.
On your AP-Extreme
Enter the manual setup
Disable Guest Network if not desperately needed
Set a dedicated name for the 5GHz wireless (wireless -> wireless options)
Eventually change the radio mode (if no 802.11b/g systems in your home) to "only 802.11n (5GHz) - only 802.11n (2.4GHz)" by holding down the option key *alt* while clicking on the drop down.
On your Mac
Disable (switch off) wireless
Enter system configuration -> network -> wireless
Uncheck "Ask to join new networks"
Enter advanced options and check that your wireless name is in the first position of the list. If not, drag it with the mouse to the first position.
Click apply
Join your wireless again and try to connect to the 5GHz name (SSID) because the 5GHz will improve the connection speed of your Mac remarkably.
Eventually you might change the settings on the Express too.
Check the location of the AP-Extreme.
It should NOT be placed: On the floor, in a corner, behind furniture, near metal objects, life high voltage wire or cordless phone bases.
It should be placed: As high as possible (up on a shelf or ceiling mounted) with a maximum line of sight to all stations, even thru walls.
If your home situation allows that, try to use the 5GHz band only. If you own a iPhone this must use the 2.4GHz radio.
Lupunus

Wifi driver and graphics card driver not found, drivers avilable on site says incompatiable .

wifi driver and graphics card driver not found, drivers avilable on site says incompatiable .

Hi:
The parts list for your notebook indicates that it has a Realtek RT8723BE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 combination adapter.
These would be the W8.1 drivers you need for that card...
Wireless:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_143747_1&swEnvOid=415...
Bluetooth:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_142906_1
See if the Intel graphics driver directly from Intel works...
https://downloadcenter.intel.com/download/24870/Intel-Iris-and-HD-Graphics-Driver-for-Windows-7-8-8-...
Then install the nvidia hd graphics driver.

How can i install AppRadio application...i am in Tunisia and the application is not found in the Tunisian AppStore...it's essensual for piloting my Pioneer SPH-D01 AppRadio....please how can i get this application ...thanks

how can i install AppRadio application...i am in Tunisia and the application is not found in the Tunisian AppStore...it's essensual for piloting my Pioneer SPH-D01 AppRadio....please how can i get this application ...thanks

If it's not available in the store in which you have your account, you're pretty much out of luck. In order to purchase from the U.S. iTunes Store you need a)a valid billing address in the U.S., b) a credit/debit card billed to that address or an iTunes prepaid card purchased in the U.S. and c) to be physically located in the U.S. at the time of purchase.

Airport time capsule not found error message

HI,
My time capsule is blinking orange.
I open aiport, sometimes airport finds the TC, sometimes not.
When not, get message:
"airport time capsule not found"
When TC is found, aiport utitily shows an error with the extended network I am setting up. I press 'edit', the settings all seem good. Re-type passwords etc and update.
The problem remains.
I have updated the firmware. An apple shop near me has reset TC using the recessed button on back of TC, and then I have re-configured at home.
BTW, TC was working fine in my old house with same laptop, so prob not simply a basic user issue...
4 other devices on my wifi network all have reliable connection, visitors' phones and laptops too, so shouln't be a wifi netowrk issue, ie network outside TC.
Any thoughts out there?
HOpe so!
mana

yes, running airport 6.1, OS 10.7.5
OK.. I failed to ask enough questions.. I think your comment it all used to work threw me.
1. You are trying to extend wireless network of what router. This will only work with another Apple router.. the way apple built it is in the family only. So please spell out what is the primary router??
If you did have it working to extend the wireless of a non-apple router in your previous house I simply don't know how.. according to Apple it isn't possible. You can use WDS.. that is slow and reduces everything to G wireless.. that is the only way.
2. When you say in the first post..
4 other devices on my wifi network all have reliable connection, visitors' phones and laptops too, so shouln't be a wifi netowrk issue, ie network outside TC.
I presume if you turn off the TC, these devices still have wireless network because they are connected to the primary router.. not the TC.. again my bad reading.. I assumed they are connected to the TC.
So please spell out the whole network..
Broadband modem.. type, model, make.
Main router.. type model make
Any other network devices.
And how was it setup in your old place and how is it different now.

My mac is the OS X 10.8.3. I tried to update the latest Adobe flash player and kept getting 'Actionlist not found.' I have uninstalled, enabled and disabled plug-ins and am still unable to download the update and now have no flashplayer at all. Help!

My mac is the OS X 10.8.3. I tried to update the latest Adobe flash player and kept getting 'Actionlist not found.' I have uninstalled, enabled and disabled plug-ins and am still unable to download the update and now have no flashplayer at all. Help!
PS I'm still new to Macs so the more broken down the better.

Adobe Flash Player 11.8.800.42 is the most recent version from Adobe. It is a pre-release version. I am using it without any noticeable problems.
The current stable version is Download 11.7.700.169.

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Oracle client and networking components were not found.

Hello, I've installed the oracle 9i Enterprise Edition, IIS, .NET framework 2.0 on a server, but when I want to open an aspx file i have this error:
Server Error in '/kinepolis' Application.
Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OleDbException (0x80004005): Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.]
System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection) +1054593
System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +53
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.OleDb.OleDbConnection.Open() +37
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
Do i really also need to install the client 6i on that server?
Can somebody help me?
thanks

Hi Guys,
I am wondering about this error as while I am using the same code to connect to the Oracle database server in my Windows program with Win Forms, the connection to the Oracle server is established and working fine.
But when I have tried to use it with Web Forms for my ASP.NET Application, it throws me out with these exceptions :
?ex.Message
"Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed."
?ex.StackTrace
" at System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr)
at System.Data.OleDb.OleDbConnection.InitializeProvider()
at System.Data.OleDb.OleDbConnection.Open()
at PMlitDocs_NET.checkMe.Button1_Click(Object sender, EventArgs e) in C:\Inetpub\wwwroot\PMlitDocs_NET\checkMe.aspx.vb:line 32"
Can anyone help?
Trush.

Oracle(tm) Client and Networking Components were not found..

I installed Oracle 9i Client tools on my machine (Win2000 Server), and successfully installed the Oracle ODBC Driver, however, upon using "Oracle in OraHome92" option in my Administrative Tools System DSN I receive the following error upon attempt to connect to the database with my ASP scripts:
"The Oracle(tm) client and networking components were not found. These components are supplied by Oracle Corporation and part of Oracle Version 7.3.."
I also receive the following error on my page:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
I have tried every trick I know and at this point am out of options. If anyone has a suggestion I'd really appreciate it.
Thanx
Phil

Hi,
I have been trying to setup Microsoft ODBC drivers on my Win7 64 bit laptop to work with my code.
Every time it gives me an error msg "Oracle(tm) client and networking components were not found"
ple help me in this. i have tried downloading and installing odbc driver from oracle site but none work.
Can someone guide me as which other software need to be install.
here is the connection string I am using, please help:
strDBConnString = "Driver={Microsoft ODBC for Oracle};" & _
"CONNECTSTRING=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST="&THostName&")(PORT="&TPort&"))" & _
"(CONNECT_DATA=(SID="&TSID&")));Uid="&TUserID&";Pwd="&TPassword&";"
Thanks

In GR, T331 entry for warehouse number GVW and storage type 916 not found

Hi friends,
while doing gr, it is giving following error. we are having wm
T331 entry for warehouse number GVW and storage type 916 not found
regards,
william

Hai,
Add the entry 0f 916 storage type to ur warehouse by copying from std i.e 001 in SPRO/Log Exe/WM/Master data/Define str type.
Regards,
BSK

JPS-03026: PDPService and PolicyStore Service instance not found in default

Dear all
I just installed OIAM and I am facing this error when I try to start AdminServer:
JPS-03026: PDPService and PolicyStore Service instance not found in default context
There is an entry in the manual that says that I need to execute this:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
I did it, I see in the weblogic.policy file the entries mentioned in the manual:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_
${jrf.version}/*" {permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {permission java.security.AllPermission;
Still I have the same issue.
Any ideas?
Thanks

A: JPS-03026: PDPService and PolicyStore Service instance not found in default

hey Arturo,
I just did this into my server:
1)These steps are to prepared Identity and Policy Stores according to EDG 12035-07. So, webLogic Administration Server will not start after configuring OAM/OIM cluster.
And then you will reach: error message SEVERE: Ldap bootstrap credential retrieval failed. Reason:java.security.AccessControlException: access denied
2)yes, you must modify the security policy for WebLogic using the modifygrants.py script supplied in IAM Suite installation. I did it once and just after running the script my AdminServer process started correctly.
Please check and see if you are not missing something:
18.3.2.2 Editing the weblogic.policy file
To edit the weblogic.policy file, run the following command:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
Important is:
The above command will only work if use the default policy name, weblogic.policy file. <===check this.
Only if you change the default name for the policy file, then you must open the file in a text editor and add the following lines:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_${jrf.version}/*" {
permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {
permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {
permission java.security.AllPermission;
So, just check if there is no misunderstanding. I just did into my server it's working fine now.
I hope this helps,
Thiago Leoncio.

Computer turns itself off and says boot drive not found, what do i do?

computer turns itself off and says boot drive not found, what do i do?

Hi,
Please use instructions from the following link to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_in...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

When I download reader 10.1.4 it begins and then freezes and states that actionlist not found

when I download reader 10.1.4 it begins and then freezes and states that actionlist not found

I dont know why this is happening, but I suggest you download and install the updates manually:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5353
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5435

Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network with newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

My Power Book G3 Pismo with an Airport wireless card running Mac OS X 10.4.11 will not connect to my new Airport
Extreme Base Station using WPA Personal/WPA 2 Person encryption. The Airport firmware is version 9.52. From
posts I've read online at different places indicates the Airport card should support the WPA encryption. Perhaps the problem
is the Base Station is using a combination setting and the fault is in the base station?
Thanks for any suggestions

Perhaps an inexpensive usb wireless adapter would work as well?
This is probably the simplest way to get the G3 connected to the wireless network.
I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
The new AirPort Extreme is broadcasting a wireless signal.
A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable.
This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
I do have an old Linksys Wireless G router. I wonder if that would work?
In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

Linxsys and Airport Extreme card settings

What settings should I have on for my airport card to work with a Linxsys wireless router?
Can I search the available networks?
Any and all assistance with air port card is welcome and I can not get the unit to find the wireless setting.
Thank you.

The AirPort Extreme card is a 802.11b/g-compatible wireless device...as is, most likely, your Linksys wireless router. No special settings are required to use the AirPort card with Linksys. Are you having trouble connecting?

Pismo and Airport card; Card not found

Similar Messages

Maybe you are looking for