Pismo PowerBook Time Remaining
I have a Pismo PowerBook that since upgrading to 10.4 will no longer calculate the time remaining on it's battery. It calculates percentages correctly, but not time remaining. Has anyone heard of this problem?
I doubt Apple has ANY interest in fixing any problems which are hardware-specific to older, discontinued systems. Much better to leave the bugs intact and try to convince us to buy a new one.
The thing is, if they built a fast G4 Powerbook that was as versatile, easily upgradeable and well-engineered as Pismo, I probably would...
Similar Messages
-
Pismo Powerbook- failure to start up
I would appreciate any advice regarding my Pismo Powerbook (500 MHz, 386 Mb RAM, 40 gb hard drive, Mac OS 10.4.11) not being able to boot up.
By swapping parts with another Pismo Powerbook, I've determined that the following are not the problem (at least as far as I know):
Logic board
Processor
Hard drive
PRAM battery
Powerbook battery
During booting, there was no chime, but a humming noise is heard and the keyboard capslock or numlock lights up when pressed.
The screen does not light up of course and remains dark (screen problem, would a bad display prevent startup?).
Previously, the computer did power up once in a blue moon but now it remained not being able to do so. I did check for loose connections and did not find any.
Since I just upgraded this old workhorse recently (400 MHz to 500 MHz processor and bigger hard drive), I would really like to keep it alive.
Thanks in advance for any input.Troubleshooting portables that won't turn on or start up
http://support.apple.com/kb/TA25686?viewlocale=en_US
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Cheers, Tom -
Can't Observer Pismo PowerBooks with Apple Remote Desktop 3.0
Today I installed ARD3.0 on a Dual G5 2GHz PowerMac and went through the process of Manage>Update Client Software on all Macs on the LAN: G5 Quad, 2 x Pismo G3 PowerBooks, G4-733 and a Dual G4-500.
All updates were successful after enabling ALL Privileges of the ARD 2 clients. However when I try to Observe/Control either of the Pismo PowerBooks, the connection times out with a "Connection Failed" message.
I can access all the other functions, like Update software, reporting and Spotlight (AFAIK)
There are no problems on the G4s or the G5 Quad. All function seem to working as advertised.
ALL comps are at Tiger 10.4.6.
The only difference in the network connections is that the all the G4s and G5s are on a Gigabit Switch, and the Pismos are on a 100Mb switch - The Gb switch is up-linked to the 100Mb switch, which uplinks to the router.
Any help or suggestions on how to get the Observe/Contol functions working on the Pismos would be greatly appreciated.
Thanks
Gary
Dual G5 2.5 GHz Dual Core, 2.5 GB RAM, 500 GB HDD Mac OS X (10.4.6)Is this right, last post by ChaosmonkeyUK?
http://discussions.apple.com/thread.jspa?messageID=9116485#9116485 -
I created an iCloud account and also had to get more space so after I have made the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help I'm unable to make the backup as I need to transfer all my data on my new iPhone 5S
This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
In the meantime you can back up your phone to your computer by connect it, opening iTunes and going to File>Devices>Back Up. Also be sure to transfer your purchases (File>Devices>Transfer Purchases). Then set up your new phone and when given the option, choose Restore from iTunes Backup and follow the prompts to restore this backup to your new phone. This will be much faster than using iCloud anyway. -
I installed Yosemite and since then the system has been running slow. I chose to use FileVault and it says it's encrypting but keeps saying estimating time remaining. I've tried repair permission and restarting my computer. Saw some other threads with similar problem and ran diskutil cs list which showed 80% the first time and now says failed. I also did an Entre Check and here are the results.
Problem description:
Mac running slow after installing Yosemite
EtreCheck version: 2.0.6 (91)
Report generated October 26, 2014 at 12:18:37 AM PDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2 days 2:31:27
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (360.91 GB free)
Encrypted AES-XTS UnlockedFailed
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-898 disk2 : (510.3 MB)
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted> : 11 MB
disk2s2 (disk2s2) <not mounted> : 15 MB
disk2s3 (disk2s3) <not mounted> : 11 MB
disk2s4 (disk2s4) <not mounted> : 12 MB
disk2s5 (disk2s5) <not mounted> : 8 MB
disk2s6 (disk2s6) <not mounted> : 11 MB
disk2s7 (disk2s7) <not mounted> : 13 MB
disk2s8 (disk2s8) <not mounted> : 14 MB
disk2s9 (disk2s9) <not mounted> : 14 MB
disk2s10 (disk2s10) <not mounted> : 15 MB
disk2s11 (disk2s11) <not mounted> : 8 MB
disk2s12 (disk2s12) <not mounted> : 9 MB
disk2s13 (disk2s13) <not mounted> : 27 MB
disk2s14 (disk2s14) <not mounted> : 16 MB
disk2s15 (disk2s15) <not mounted> : 23 MB
disk2s16 (disk2s16) <not mounted> : 12 MB
disk2s17 (disk2s17) <not mounted> : 11 MB
disk2s18 (disk2s18) <not mounted> : 24 MB
disk2s19 (disk2s19) <not mounted> : 14 MB
disk2s20 (disk2s20) <not mounted> : 18 MB
disk2s21 (disk2s21) <not mounted> : 10 MB
disk2s22 (disk2s22) <not mounted> : 36 MB
disk2s23 (disk2s23) <not mounted> : 17 MB
disk2s24 (disk2s24) <not mounted> : 20 MB
disk2s25 (disk2s25) <not mounted> : 18 MB
disk2s26 (disk2s26) <not mounted> : 42 MB
disk2s27 (disk2s27) <not mounted> : 33 MB
disk2s28 (disk2s28) <not mounted> : 29 MB
disk2s29 (disk2s29) <not mounted> : 12 MB
disk2s30 (disk2s30) <not mounted> : 6 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) Support
[not loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.secd.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.corestorage.corestoragehelperd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.systemstats.analysis.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[invalid?] com.sophos.uiserver.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.sophos.intercheck.plist Support
[invalid?] com.sophos.notification.plist Support
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.plexapp.helper.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Canon IJ Network Scanner Selector2 ApplicationHidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Canon IJ Network Scan Utility Application (/Library/Printers/Canon/BJPrinter/Utilities/Canon IJ Network Scan Utility.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
Move_Media_Player: Version: npmnqmp 071505000006 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Destinations:
GoFlex Home Backup [Network]
Total size: 3 TB
Total number of backups: 70
Oldest backup: 2013-07-21 16:39:58 +0000
Last backup: 2014-10-17 01:49:13 +0000
Size of backup disk: Excellent
Backup size 3 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
5% WindowServer
1% diskimages-helper
0% backupd
0% AppleSpell
0% fontd
Top Processes by Memory: ℹ️
172 MB com.apple.WebKit.WebContent
116 MB backupd
77 MB Dock
52 MB Finder
47 MB com.apple.WebKit.Networking
Virtual Memory Information: ℹ️
48 MB Free RAM
1.08 GB Active RAM
1.04 GB Inactive RAM
1.19 GB Wired RAM
33.41 GB Page-ins
1.26 GB Page-outsPlease answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart the router and the broadband device, if they're separate. Any change?
Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
Are you connected to Ethernet as well as Wi-Fi? If so, disconnect the Ethernet cable or adapter and test.
If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
If you're running a MacBook with the lid closed, open the lid. Any difference?
Start up in safe mode and test. Any difference?
Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference? -
I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and didnt complete.
The text "Time remaining ... hours" flickers.
I set it to start restoring from the 3GS backup yesterday at 1pm and the time remaining kept on increasing. I left it overnight and at 9am this morning the progress bar hadnt moved and it said 12 hours remaining.
I don't know why its taking so long. I unplugged it and it just set up as new phone. So i did a factory reset and tried again at 4pm and it is now 12am and it says 4 hours remaining and my computer occasionally flickers. (Its not a bad computer, 2 months old, i7, 6GB RAM, Heaps of HDD space). It also messes with google chrome and i cannot browse the web at all while it is trying to restore my iphone.
I have tried restarting my laptop and should i reinstall itunes? I simply dont see why it should take longer than 20 hours to copy over 20GB of data!
Can anyone help me?
Thank youI'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)
-
I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102)" I have tried everything , I've been told its my ISP but I have tried using differenet internet to attempt the updates. Like I said all other software updates fine its just apple software
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
I tries to backed up and storage on iCloud but its just shows down below "Estimating time remaining" but theres no time remaining !!! And i connect to the Wifi already and i buy a storage capacity !!! But its not backing so what should i do in that case !!!?
Welcome to the Apple Community.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable. -
I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
In 'mail', after importing mailboxes the process gets stuck on '1619 of 72826' and 'time remaining' climbs infinitely. Please suggest a solution.
I converted my mail boxes from POP to imap for the purpose of syncing all my devices. I backed up my mail boxes and further more perfomed a timemachine backup.
Upon restoring ther mailboxes, either by manually copying them to the mailboxes folder, and restoring a timemachine backup, both pocesses result in the above problem.
Please recomend a solution.
file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.48.10 %20PM.png
file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.38.30 %20PM.pngCan anyone out there please help!
-
My iPhone 4 says "backed up-never". I am trying to back up to Icloud..it says it will automatically backup when is plugged in, locked, and connected to Wi-Fi. Does this mean I have to lock my phone? It shows "backing up" & "estimating time remaining".....but it looks like it will never finish. Can somebody please help me? I do not have enough memory to update my phone, I do not want to lose all of my pics & videos....is there some way to save them ie., memory card?
I am truly ignorant with respect to this, but I was trying to video my grandson & it told my I was out of storageYou should import your photos and videos to your computer following the steps outlined in this guide: http://support.apple.com/kb/HT4083. After doing so you will be given the option to delete them from your phone to give you more space. If you don't want to delete them all in this way, after importing them to your computer you can open your camera roll in the thumbnail view, tap Edit, tap all the photos and videos you want to delete from your phone, then tap Delete.
If you have never backed up your phone, and are having trouble backing up to iCloud, you should perform a manual backup on your computer. To do this, connect your phone to your computer, open iTunes, right-click on the name of your phone on the left side and choose Back Up. (If you have iTunes 11, first go to View>Show Sidebar.)
To back up to iCloud you need to be sure your phone is connected to wifi and your charger, then just press the power button to lock the screen (i.e., put it in "sleep" mode). It should then back up automatically if you have turned on iCloud Backup in Settings>iCloud>Storage & Backup (at the bottom). -
Please help anyone who can.
Firstly I know I have very little RAM on my system, only 4GB but I've been rendering the same kinds of files for weeks with no problems until the last few days.
They biggest issues is as follows:
My timeline in Premiere Pro CC 2014 has 1080p 50mbps MXF footage from a Sony PMW 200 and some similar footage replaced with an After Effects comp for green screen keying.
The clip, approx 2min, starts with a linked comp from after effects, then cuts to the mxf footage and back to a linked comp at the end.
I am exporting via media encoder to h264 1080p. The file rendered fine for about 40min with the processor at 50% approx. The processor then shot up to 99% for 10 mins and the render progress bar
went up to almost 90% complete.
Then the progress bar stopped, the processor dropped to 0%, time remaining is steadily climbing and so is time elapsed. I've tried pausing and un pausing the render que and nothing else is running in background.
I need these files rendered tonight!! I've tried this a few times and this problem keeps occurring sometimes with the remaining time shooting up to 74 hours!!
Can anybody tell me what I'm doing wrong?!
Windows 7 Professional (64 bit)
Dell Precision workstation 690
Intel xeon X5365 3ghz (x2)
4 GB RAMSounds exactly like what is happening to me. This is frustrating because it was a 30 hour encoding process and the place where it is stuck is right at the very end of the sequence on the 2nd pass, although there is still about 12% of the progress bar remaining. I guess that this is where it takes all its work and puts the separate files into the single video file. I really don't want to go through this again. The final video file is showing up though and is shown having the size that I am expecting it to be.
Any workarounds to somehow get this unstuck? I am hesitant to just try and open the file. I am going to try a couple of things and if I am successful at getting this to finish without restarting then I will be sure to post it here.
Also, I don't know if this has anything to do with this problem, but I looked at my system Activity Monitor, and there is a CPU process highlighted in red, it states:
Adobe QT32 Server (not responding)
Thirty minutes later...
I was incorrect above as to the actual problem. I paused the queue encoding that was stuck, then opened up the project again in Premiere Pro only to discover that there was an offline still image which I stupidly had renamed during the day. So I renamed the file back to its original name, reconnected the picture, saved the PP project. Then I started the encoding back up and still no luck.
So I paused the encoding again, went back into the PP project and rendered just the area under question, saved it, and exported it into the queue. Then just to be safe I went to the paused item in AME, and duplicated it adding another version into the queue.
Then I unpaused the encoding and ... SUCCESS!! Not sure which of the final steps did the trick, but I am guessing that it was the rendering of the part of the sequence that it was stuck on. Hope this helps someone. -
Why can't I see my audiobook time remaining in iTunes on my iPhone 4s?
How do I see the time remaining on my audiobook in iTunes on my iPhone 4s?
I figure this out on my own.
Tap on the graphic of the book (not the chapters link in the top right corner) and the process bar with time played, remaining, and even repeat are available.
Lesson learned? If you keep tapping, eventually the solution will be found. -
Battery time remaining (how to properly charge macbook pro retina)
I'm a new macbook user, using a macbook pro 15 inch. I've been plugging in my charger when the battery gets down to around 20% and unplugging it when the light turns green (at 100%). I thought macbooks had a battery life of around 7-8 hours, but at fully charged, my time remaining (when I click on the battery icon the top right) says 5 hours. Can a more experienced user correct me on as to what I am doing wrong in charging my macbook?
Two points: The 'Time' setting is one of the most unreliable pieces of information on your MBP. I set mine to '%'. What it tries to show is based on what the MBP is doing at that very instant. If you open Activity Monitor, you will see that the internal processing is very volatile.
What Apple advertises as time on a full charge is based on ultra conservative settings and use. It doe not reflect the 'real' world. Read the fine print and note the words 'up to', nor will, guaranty or promise.
Your battery run time will be a reflection of what applications you have open and the respective resources these applications require.
Here is a link to some good information regarding your MBP battery and its usage. This will give you something to do for the rest of the afternoon.
http://www.apple.com/support/macbookpro/batteries_power/
Ciao. -
ITunes Music Progress Bar Fails to Show Time Remaining
I use iTunes for Windows. Suddenly, in the last two weeks, the progress bar on my iTunes screen has quit showing time remaining on a tune on the right-hand side of the bar. Throughout the tune, it shows only the full time of the tune. How can I change back to time remaining?
If I remember right in Qt before version 7 you could get time remaining. I'm 100% in saying version 7 dropped this...You can get time remaining in the info box...
Maybe you are looking for
-
How do use 2 iphones with 1 iTunes to share files, How do use 2 iphones with 1 iTunes to share files
Hello. I have my personal iPhone 5 which is setup up to my iTunes on my PC laptop. My job gave me an iPhone 4S. With my 5, I like to make ringtones with the ringtone maker app. I have them saved into iTunes. I want my 4S to be able to access those ri
-
Why is the ITunes Store in South Africa so limited
why is the ITunes Store in South Africa so limited
-
Delete & recreated SOA managed server - throws exception
Hi, I have a weblogic admin server and soa,osb managed servers running in other machines. From weblogic console, I deleted the SOA managed server and created it again. I have lot of deployments and in targets, I added the newly created soa server for
-
Why do i receive an error message when trying to go to google
Whenever I try to access google.com I am receiving a prompt to enter a password - - Why??
-
I have re-installed iCloud for windows 7, and can't sign in now. "you can't sign in because of a server error ". what should I do? thx