Pismo w/panther needs to create bootable OS9 partition for firmware update
Hi guys -
I have the original software install and software restore cds that came with my pismo, and I'm sure there must be a way to install OS9 onto a partition on my pismo from there without erasing any of the data or OSX10.3 on the other partition. Years ago when the original hard drive died, I simply bought and installed Panther and didn't install os9 anywhere.
Now I've picked up a MBP and am unable to complete the Migration Assistant data transfer from the pismo to the mbp using FW (it recognizes the info on the pismo, but stalls during transfer at 8.1 hours to go!) because (it seems) I never installed the 4.1.8 firmware update on the pismo when the update came out. The update requires a boot from a local Mac OS 9.1 writeable partition.
So, essentially, I'm looking to install os9 off of one of the original powerbook install/restore cds onto an empty partition I've prepared on the pismo so I can update the firmware and then complete the migration to the mbp.
1. Is there a way to check the pismo's current firmware (in case I've already installed it years ago and forgot?)
2. Is there a simpler way to get OS9 onto the pismo?
3. Is there a simpler way to migrate my data to the MBP? (Other than pick up a 2.5" FW enclosure, remove the hd from the pismo and do it from there?)
4. If no, to the above questions, How do I do this?
Thanks for any help!
Hi Tom -
Thanks for replying so quickly, and the tip on how to find the current firmware info !
I just checked and my pismo is also running Boot ROM Version: 3.2.4f1
However, my concern isn't how well or whether it can run Tiger - it's the machine's ability to run in Firewire Target Disk Mode. And the update in question is intended to address the pismo's shortcomings there (it's mentioned in the ReadMe file that comes with the update). It's in the apple document for troubleshooting Migration Assistant that I discovered the existence of this update. The process for me freezes...
http://docs.info.apple.com/article.html?artnum=25773
Nice to hear that Tiger runs well on the pismo though, I'll bear it in mind for the future.
Here's what I've done since posting my initial question:
I inserted the Software Restore CD and copied over all the files from it onto my partition. System Preferences<Startup Disk recognized an OS9 system file on the partition, and I selected it as my startup disk. Unfortunately, on restart I got the question mark flashing over the folder, and the pismo booted up from the Software Restore CD still in the drive. The CD did not identify my HD as viable to be restored to, something like there was nothing to restore and I must install software instead.
I am very wary of doing an install because I doubt the partition will be detected and of course the Install CD will erase the contents of my hard drive during the install. I'm tempted to pick up a cheap hd and install OS9 on that for the update, but there must be a way to get it onto the partition without wiping everything out!
Any additional help would be appreciated!
Best
Steve
Similar Messages
-
I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?
You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.
-
I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat. I keep getting a message of password not matched. I saw somewhere that my Apple id is the same as my ichat account. Do I need to create a new account for Ichat? I've already reset my Apple id password 3 times in the last 2 days. What am I doing wrong?
Hi,
At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
Other IDs such as to log in to Discussions were know as Discussion IDs
Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
There can be a variety of combos now
iChat Name
@mac.com before MobileMe
@mac.com post MobileMe
AIM Names
AIM names current
MobileMe (@Me.com)
Style
Email Address valid with the .Mac service prior MobileMe Note 1
Email style Name Valid with AIM
May or may not be an Email address
Can be AIM issued or third party Email address
Valid Email with MobileMe Service
Other Abilities
May also be Currently valid email linked to a MobileMe account
Maybe Valid Apple ID
Is a Valid AIM Screen Name
May Not be a Valid Apple ID (was an option choice at one stage)
Is a Valid AIM Screen Name
May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
Apple ID
Possibly (likely)
Possibly (depends when Registered)
More currently Yes.
No
No
Yes
Glad I could help.
8:39 PM Thursday; September 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Need to create a driver class for a program i have made...
hey guys im new to these forums and someone told me that i could get help on here if i get in a bind...my problem is that i need help creating a driver class for a program that i have created and i dont know what to do. i need to know how to do this is because my professor told us after i was 2/3 done my project that we need at least 2 class files for our project, so i need at least 2 class files for it to run... my program is as follows:
p.s might be kinda messy, might need to put it into a text editor
Cipher.java
This program encodes and decodes text strings using a cipher that
can be specified by the user.
import java.io.*;
public class Cipher
public static void printID()
// output program ID
System.out.println ("*********************");
System.out.println ("* Cipher *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* CS 181-03 *");
System.out.println ("*********************");
public static void printMenu()
// output menu
System.out.println("\n\n****************************" +
"\n* 1. Set cipher code. *" +
"\n* 2. Encode text. *" +
"\n* 3. Decode coded text. *" +
"\n* 4. Exit the program *" +
"\n****************************");
public static String getText(BufferedReader input, String prompt)
throws IOException
// prompt the user and get their response
System.out.print(prompt);
return input.readLine();
public static int getInteger(BufferedReader input, String prompt)
throws IOException
// prompt and get response from user
String text = getText(input, prompt);
// convert it to an integer
return (new Integer(text).intValue());
public static String encode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String encoded = ""; // base for string to return
char letter; // letter being processed
// convert message to upper case
original = original.toUpperCase();
// process each character of the message
for (int index = 0; index < original.length(); index++)
// get the letter and determine whether or not to
// add the cipher value
letter = original.charAt(index);
if (letter >='A' && letter <= 'Z')
// is A-Z, so add offset
// determine whether result will be out of A-Z range
if ((letter + offset) > 'Z') // need to wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE + offset);
else
if ((letter + offset) < 'A') // need to wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE + offset);
else
letter = (char) (letter + offset);
// build encoded message string
encoded = encoded + letter;
return encoded;
public static String decode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String decoded = ""; // base for string to return
char letter; // letter being processed
// make original message upper case
original = original.toUpperCase();
// process each letter of message
for (int index = 0; index < original.length(); index++)
// get letter and determine whether to subtract cipher value
letter = original.charAt(index);
if (letter >= 'A' && letter <= 'Z')
// is A-Z, so subtract cipher value
// determine whether result will be out of A-Z range
if ((letter - offset) < 'A') // wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE - offset);
else
if ((letter - offset) > 'Z') // wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE - offset);
else
letter = (char) (letter - offset);
// build decoded message
decoded = decoded + letter;
return decoded;
// main controls flow throughout the program, presenting a
// menu of options the user.
public static void main (String[] args) throws IOException
// declare constants
final String PROMPT_CHOICE = "Enter your choice: ";
final String PROMPT_VALID = "\nYou must enter a number between 1" +
" and 4 to indicate your selection.\n";
final String PROMPT_CIPHER = "\nEnter the offset value for a caesar " +
"cipher: ";
final String PROMPT_ENCODE = "\nEnter the text to encode: ";
final String PROMPT_DECODE = "\nEnter the text to decode: ";
final String SET_STR = "1"; // selection of 1 at main menu
final String ENCODE_STR = "2"; // selection of 2 at main menu
final String DECODE_STR = "3"; // selection of 3 at main menu
final String EXIT_STR = "4"; // selection of 4 at main menu
final int SET = 1; // menu choice 1
final int ENCODE = 2; // menu choice 2
final int DECODE =3; // menu choice 4
final int EXIT = 4; // menu choice 3
final int ALPHABET_SIZE = 26; // number of elements in alphabet
// declare variables
boolean finished = false; // whether or not to exit program
String text; // input string read from keyboard
int choice; // menu choice selected
int offset = 0; // caesar cipher offset
// declare and instantiate input objects
InputStreamReader reader = new InputStreamReader(System.in);
BufferedReader input = new BufferedReader(reader);
// Display program identification
printID();
// until the user selects the exit option, display the menu
// and respond to the choice
do
// Display menu of options
printMenu();
// Prompt user for an option and read input
text = getText(input, PROMPT_CHOICE);
// While selection is not valid, prompt for correct info
while (!text.equals(SET_STR) && !text.equals(ENCODE_STR) &&
!text.equals(EXIT_STR) && !text.equals(DECODE_STR))
text = getText(input, PROMPT_VALID + PROMPT_CHOICE);
// convert choice to an integer
choice = new Integer(text).intValue();
// respond to the choice selected
switch(choice)
case SET:
// get the cipher value from the user and constrain to
// -25..0..25
offset = getInteger(input, PROMPT_CIPHER);
offset %= ALPHABET_SIZE;
break;
case ENCODE:
// get message to encode from user, and encode it using
// the current cipher value
text = getText(input, PROMPT_ENCODE);
text = encode(text, offset);
System.out.println("Encoded text is: " + text);
break;
case DECODE:
// get message to decode from user, and decode it using
// the current cipher value
text = getText(input, PROMPT_DECODE);
text = decode(text, offset);
System.out.println("Decoded text is: " + text);
break;
case EXIT:
// set exit flag to true
finished = true ;
break;
} // end of switch on choice
} while (!finished); // end of outer do loop
// Thank user
System.out.println("Thank you for using Cipher for all your" +
" code breaking and code making needs.");
}My source in code format...sorry guys :)
Cipher.java
This program encodes and decodes text strings using a cipher that
can be specified by the user.
import java.io.*;
public class Cipher
public static void printID()
// output program ID
System.out.println ("*********************");
System.out.println ("* Cipher *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* CS 181-03 *");
System.out.println ("*********************");
public static void printMenu()
// output menu
System.out.println("\n\n****************************" +
"\n* 1. Set cipher code. *" +
"\n* 2. Encode text. *" +
"\n* 3. Decode coded text. *" +
"\n* 4. Exit the program *" +
"\n****************************");
public static String getText(BufferedReader input, String prompt)
throws IOException
// prompt the user and get their response
System.out.print(prompt);
return input.readLine();
public static int getInteger(BufferedReader input, String prompt)
throws IOException
// prompt and get response from user
String text = getText(input, prompt);
// convert it to an integer
return (new Integer(text).intValue());
public static String encode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String encoded = ""; // base for string to return
char letter; // letter being processed
// convert message to upper case
original = original.toUpperCase();
// process each character of the message
for (int index = 0; index < original.length(); index++)
// get the letter and determine whether or not to
// add the cipher value
letter = original.charAt(index);
if (letter >='A' && letter <= 'Z')
// is A-Z, so add offset
// determine whether result will be out of A-Z range
if ((letter + offset) > 'Z') // need to wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE + offset);
else
if ((letter + offset) < 'A') // need to wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE + offset);
else
letter = (char) (letter + offset);
// build encoded message string
encoded = encoded + letter;
return encoded;
public static String decode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String decoded = ""; // base for string to return
char letter; // letter being processed
// make original message upper case
original = original.toUpperCase();
// process each letter of message
for (int index = 0; index < original.length(); index++)
// get letter and determine whether to subtract cipher value
letter = original.charAt(index);
if (letter >= 'A' && letter <= 'Z')
// is A-Z, so subtract cipher value
// determine whether result will be out of A-Z range
if ((letter - offset) < 'A') // wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE - offset);
else
if ((letter - offset) > 'Z') // wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE - offset);
else
letter = (char) (letter - offset);
// build decoded message
decoded = decoded + letter;
return decoded;
// main controls flow throughout the program, presenting a
// menu of options the user.
public static void main (String[] args) throws IOException
// declare constants
final String PROMPT_CHOICE = "Enter your choice: ";
final String PROMPT_VALID = "\nYou must enter a number between 1" +
" and 4 to indicate your selection.\n";
final String PROMPT_CIPHER = "\nEnter the offset value for a caesar " +
"cipher: ";
final String PROMPT_ENCODE = "\nEnter the text to encode: ";
final String PROMPT_DECODE = "\nEnter the text to decode: ";
final String SET_STR = "1"; // selection of 1 at main menu
final String ENCODE_STR = "2"; // selection of 2 at main menu
final String DECODE_STR = "3"; // selection of 3 at main menu
final String EXIT_STR = "4"; // selection of 4 at main menu
final int SET = 1; // menu choice 1
final int ENCODE = 2; // menu choice 2
final int DECODE =3; // menu choice 4
final int EXIT = 4; // menu choice 3
final int ALPHABET_SIZE = 26; // number of elements in alphabet
// declare variables
boolean finished = false; // whether or not to exit program
String text; // input string read from keyboard
int choice; // menu choice selected
int offset = 0; // caesar cipher offset
// declare and instantiate input objects
InputStreamReader reader = new InputStreamReader(System.in);
BufferedReader input = new BufferedReader(reader);
// Display program identification
printID();
// until the user selects the exit option, display the menu
// and respond to the choice
do
// Display menu of options
printMenu();
// Prompt user for an option and read input
text = getText(input, PROMPT_CHOICE);
// While selection is not valid, prompt for correct info
while (!text.equals(SET_STR) && !text.equals(ENCODE_STR) &&
!text.equals(EXIT_STR) && !text.equals(DECODE_STR))
text = getText(input, PROMPT_VALID + PROMPT_CHOICE);
// convert choice to an integer
choice = new Integer(text).intValue();
// respond to the choice selected
switch(choice)
case SET:
// get the cipher value from the user and constrain to
// -25..0..25
offset = getInteger(input, PROMPT_CIPHER);
offset %= ALPHABET_SIZE;
break;
case ENCODE:
// get message to encode from user, and encode it using
// the current cipher value
text = getText(input, PROMPT_ENCODE);
text = encode(text, offset);
System.out.println("Encoded text is: " + text);
break;
case DECODE:
// get message to decode from user, and decode it using
// the current cipher value
text = getText(input, PROMPT_DECODE);
text = decode(text, offset);
System.out.println("Decoded text is: " + text);
break;
case EXIT:
// set exit flag to true
finished = true ;
break;
} // end of switch on choice
} while (!finished); // end of outer do loop
// Thank user
System.out.println("Thank you for using Cipher for all your" +
" code breaking and code making needs.");
} -
Need to create stupid proof templates for non-designers
Ok folks, I'm new to this forum having come across it in search of a solution to my problem.
I need to create illustrator template files (.ai not .ait) that customers can download and use to create their own artwork for print. I have to create them in every printable paper format from business cards to A3 posters, folding, non-folding yada yada.
Now, previously, we used an .ai file with a guide layer we created. This guide layer had all relevant info, was named accordingly. It was set not to print and locked. As I tend to use print to file, distiller and all, this has always been perfectly adequate to create my pdfs. Of course, this doesn't work the same way when saving a pdf, which is what most people do. However, customers who wish to download the templates are having some difficulty with the concept of 'make sure you delete the guide layer before saving your pdf'.
For the most part, the customers using these files are not illustrator literate. Even though there are clear instructions to 'delete' the guide layer when saving the needed pdfs, they are failing to do so. This means when the .ai (with the non printable layer) is saved to pdf, the guide layer as a hidden object is saved within the pdf. Upon printing at our printing facilities, the guide layer has been printed with disasterous results.
A possible solution we came up with was to use the ruler guides to create the guide layer. For this solution to work though, I need to be able to use different colours for different guides within the same document. Which we can't. We can only change all the guide colours and they are all the same colour.
Another idea would be to outline text indicating various printable and non-printable areas and making them into guides via View>guides>make guides, which works to an extent but looks messy, especially when viewing the full page and again, isn't particularly distinctive, leading back to having different guides in different colours.
I've come across another possible solution involving template layers. Viewing the resulting pdf seems fine and in all purposes it does what we need, except for when reopening the saved (not printed) pdf back in illustrator, the template layer is still there and I need it gone. The same way it would be if the .ai were printed to postscript and sent through distiller.
My ideal solution would be to have to ability to have the different coloured ruler guides in place throughout my document, but as I previously stated, all guides have to be the same colour and that's useless in this instance.
So, has anyone got any bright ideas. Coincidentally I need to create the same templates for both psd and indesign but I'll cross that bridge when I've figured this out.Hey Mike, thanks for the response.
1. Not a chance, if, even when the process is described in great detail in an info pdf, available as info on the website (with screenshot instructions) and mentioned in the .ai file itself, they aren't even deleting the guide layer, then turning off 'Preserve illustrator editing capabilities' is kind of a stretch. Like I said, the folks these templates are to be designed for are not illustrator literate for the most part.
2. Not sure if this would work. I'd have to look into it.
3. Beyond my capabilities. I'll let you know if number 2 works.
One possible solution I've come up with uses the idea of a template layer always on top, with 'DELETE THIS LAYER' and screenshot of layers pallette and clear little red arrows etc. If I can the template layer to always remain on top, with their artwork layer underneath, they would have to toggle hide/unhide to view their artwork, and the reminder to remove the guide layer would be pretty much in their face. That's not a guarantee either though.
Personally, I think what I've been asked to achieve is a pretty hard task and honestly, I'm thinking there are no failsafe options. -
Hi, both my husband and I have iphones synced to my apple id. It seems that we can't facetime due to this as it's like my email address is calling my email address! Is there anyway to fix this or will we need to create a new id for my husband's phone?
settings - facetime - remove the apple id, on your husband phone.
He should create his own id for imessage and facetime. -
Need to create a Z transaction for SE16
Hi All,
I have a requirement in which I need to create a Z transaction for SE16 and then restrict the access of that transaction to 3 tables and users cannot see other tables through this transaction. it would be fine even if this condition can be implemented on standard transaction(in SE16 with out creating a Z with the help of basis team).
I tried to copy the transaction and also the program (program name: SAPLSETB and screen 230 even this program is made a Z program)
but this is giving a short dump.
Please let me know if the process i am following is correct if not can you please suggest me a better one.
Thanks in advance.
Regards,
LRK.Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
TAB2 RADIOBUTTON GROUP R1,
TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
WHEN TAB1. TABNAME = 'BSID'.
WHEN TAB2. TABNAME = 'BSAD'.
WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
EXPORTING
TABLE_NAME = TABNAME
* ACTION = 'ANZE'
* WITHOUT_SUBMIT = ' '
* GENERATION_FORCED =
* NEW_SEL =
* NO_STRUCTURE_CHECK = ' '
* DATA_EXIT = ' '
* IMPORTING
* PROGNAME =
* TABLES
* SELTAB =
EXCEPTIONS
TABLE_IS_STRUCTURE = 1
TABLE_NOT_EXISTS = 2
DB_NOT_EXISTS = 3
NO_PERMISSION = 4
NO_CHANGE_ALLOWED = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Need to create a Change document for tracking Purpose on standard table
Hi Experts,
I am updating a field in standard table so need to create a change document for tracking the changes being done on the field.
I created the change Document with transaction SCDO but I am stuck at point - How to call that in the report program to enable the change document.
Please advice.
Thanks!!Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
TAB2 RADIOBUTTON GROUP R1,
TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
WHEN TAB1. TABNAME = 'BSID'.
WHEN TAB2. TABNAME = 'BSAD'.
WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
EXPORTING
TABLE_NAME = TABNAME
* ACTION = 'ANZE'
* WITHOUT_SUBMIT = ' '
* GENERATION_FORCED =
* NEW_SEL =
* NO_STRUCTURE_CHECK = ' '
* DATA_EXIT = ' '
* IMPORTING
* PROGNAME =
* TABLES
* SELTAB =
EXCEPTIONS
TABLE_IS_STRUCTURE = 1
TABLE_NOT_EXISTS = 2
DB_NOT_EXISTS = 3
NO_PERMISSION = 4
NO_CHANGE_ALLOWED = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Need to Create the STATUS Profile for Q-Info record
Hi Guys,
Basically in the Q-Info record we have status profiles like VN, SP, MP OM and MP NOM etc... Under this status profiles there are few staus profiles assigned to it, in the same way
I need to create the status profile for Q-Info record under the status profile MP NOM (Non Original Mfgr MP), so that when I am creating the Q-Info record I can select the status profile which is under the MP NOM.
Guys anyone can guide me to create the status profile in BS02.
Regards,
SMBS02--->Select the status say " QM_P_001" ->Copy As F6 - >Enter new name>enter.
Now chage the relevent data as per your requirement. -
I have 2 children with iPods and I need to create 2 different accounts for them so they can play the same games. How do I do this?
To restore the classic menu bar, you can do any of these:
orange Firefox button > Options > Menu Bar
tap the Alt key > View > Toolbars > Menu Bar
right-click a blank area of the tab bar or navigation bar > Menu Bar -
Do I need to Create Primary Key Class for Entity beans with Local interface
Do I need to Create Primary Key Class for Entity beans with Local interface?
I have created my entity bean with the wizard in Sun One Studio and it does not create a primary key class for you.
I thought that the primary key class was required. My key is made up of only one field.
Anyone know the answer.
Jimu dont need to create a primary key class for a entity bean.if ur table's primary key feild(int ,float) is a built in or primitive data type,then u dont need one.But if ur table has a primary key field which is non primitive (for example StudentID,ItemID etc)then u have to create a primary key class.
hope this helps :-) -
What is variants...why we need to create these in bw for processchains run
what is variants...why we need to create these in bw for processchains run
Process Variant lets u select on what all Objects the process type need to process on.
http://help.sap.com/saphelp_nw04/helpdata/en/6e/192756029db54192427cf6853c77a7/content.htm
Ex : Create Index Variant will have the Cube name for which( Load ) the Indexes are created. -
trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?
You have to do it on the Apple TV itself while it's plugged into a TV so that you can see its screen.
I quote
How to update software on your Apple TV (2nd and 3rd generation)
Learn how to update the software on your Apple TV (2nd and 3rd generation). It's always a good idea to have the latest software on your Apple TV.
Update your software
Select Settings > General > Update Software. Apple TV checks for an available update; if one is available, a download message should appear.
Click Download and Install to start the download process.
Do not disconnect your Apple TV during the update process. The Apple TV status light may flash slowly during the update and restart process. This is expected behavior. -
Create bootable flash drive for Windows 8 in Boot Camp
I am running a Windows 8-based marine navigation program ("Coastal Explorer") in Boot Camp, on MacBook Air. I would like to create a bootable flash drive for emergencies. Should it have Maverick or Windows 8 OS? - or do I partition the key drive for both, with the Windows partition also containing a copy of the navigation software and maps for extra insurance? I guess the first question is, "Is this possible?" Then I would need to find information on how to create such a drive. All advice appreciated.
Windows drivers and Mac drivers have nothing to do with each other. So that's a no on your question.
-
I am working on many projects and my bookmark folders suffice. I need to create new folders, but not "Smart Folders." After over 2 hours, I keep coming back to the same description of how to add new folders to existing ones. NOT what I want to do. This used to be easy, but the set up must have changed as I've been trying to do this all day with no success.
Also, somehow my gmail inbox appears twice in my bookmarks toolbar. Again, I am finding information that does not apply to me in help and former question files and links. How do I remove things from my bookmarks toolbar?
Thank you and PLEASE, oh Please e-mail the answer to me as I seem to have problems with your site.Open the Bookmarks Library, to do that in the Bookmarks menu select "Organize Bookmarks"
In the Bookmarks Library, in the left hand pane click on "Bookmarks Toolbar" to select it, now in the Organize menu select "New Folder".
If you have the capability to right-click, you can also right-click on the Bookmarks Toolbar and select New Folder.
ps Questions on this forum are normally answered by volunteers, and for privacy reasons many will not be willing to send emails. You have also not shown your email address.
Maybe you are looking for
-
How do i change the incoming sms to stop people from seeing the start of my new message?
when i recieve a new sms it arrives as" new event" & shows the start ofte the message. how can i chang this so no-one can see my messages? i have a sony ericsson elm, my last sony ericsson had an option where i cohuld change it but tis one dosnt seem
-
User-Exit/Badi For Vendor Down Payment Request
hi All, Is there any user-exit or badi available for vendor down payment request? tcode:f-47. please let me know. Thanks & Regards, Raj
-
Hi Guys, I have a big problem when instantiating PROXY object in ABAP for sending data through my Web Service. Context: A Program calls a Mondule Function that calls afterwards a Webservice. Realization: in SE80, I created my Webservice correctly. an
-
I can't get my iphone to appear under devices within itunes, my iphone appears as my ipod under devices therefore I am unable to sync my music etc onto my iphone. any suggestions???
-
Previously activated DRM in Aldiko on my android tablet is no longer working
I have previously activated DRM in Aldiko on my android tablet with no problem. I imported a new ebook into Aldiko yesterday, with no problem for this book, but the DRM on all my other previously purchased ebooks was then de-authorized. When I try to