Pisuper Authorization error, I can't logged with any user on Int Builder

Hi SAP Guru's ,
Please help me as i new in SAP XI . I am unable to logged on in Integration Builder with any user i tried pisuper, sapuser but still got the same error "Authorization error, unknown username or password" . I check with T-Codo SU01 but pisuper does not exist so i create one user and assign him SAP_XI_Developer , SAP_XI_Configuration etc but still i am unable to login so kindly requesting you to please help me as quickly as possible.
even though i am unable to logged on user management with any user. PLease tell me the step by step configuration of how to setup each and every part of XI.

check with naveen's reply
XI 7.0 - Authorization error; unknown username or incorrect password
Also visit the blog
Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]

Similar Messages

Oracle 10g 10.2.0.1.0 - Unable to log with any user

Hi
I have Oracle 10g R2 10.2.0.1.0. Recently, I enabled ARCHIVELOG on my server as I wanted to migrate the database to a new server. After one day, I tried to access the database using any user apart from SYS or SYSTEM but I could not log in.
I investigated further and this is what happened:
1. When i try to connect to the database using SQLDeveloper with SCOTT, it gives me a message confirming that it has successfully connected to the database.
2. But after that, i cannot access any of my tables/views for this user as it again tries to load the database on the client. SQL developer hangs and I have to terminate the process to restart the client.
When I try using SQL Plus and log in using sqlplus sys@orcl as sysdba; I can connect to the database, but when I try sqlplus scott@orcl; I get this error,
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Please HELP!!! i am really stuck!!!

OK... a new one.. after I try what you suggested, sqlplus is stuck after I enter the password:
C:\Documents and Settings\Administrator>sqlplus scott@orcl
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Apr 13 23:01:21 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
_+

G5 unusable, can't login with any users

Hi, and thanks in advance for helping.
The iMac doesn't accept any user name and password at start up. I tried to change the admin password from the "Change Password" appl form Install Disk 1, and after selecting the Mac HD it says "No Users Found". Then i tried to reinstall the system, and after that same thing, it starts up but i can't loggin in any way.
Any hints? Could you help me?
Thank you, and forgive my poor english
Roberto

Do you have an external clone? If it starts up from this, you can reinstall your system from the clone. Have you enabled
FileVault? if so, you need your master password.Did you follow these instructions for resetting your password?
Have you tried starting in single user or verbose mode?
1. Shut down the computer if it is on.
2. Press the power button to start the computer.
3. Immediately press and hold the Command (Apple) key and one of the following:
the "s" key for single-user mode.
the "v" key for verbose mode.
4. To exit single-user mode type: reboot
5. Press Return.
Hope some of this helps,
Miriam

The email address assoc. with my iTunes account is no longer valid. can't access it. need to change it in iTunes but can't access account. even my birthdate is incorrect in iTunes...so can't log in. any suggestions on how to log in and edit info???

the email address assoc. with my iTunes account is no longer valid. can't access it. need to change it in iTunes but can't access account. even my birthdate is incorrect in iTunes...so can't log in. any suggestions on how to log in and edit info???

There is nothing that you can do to get rid of the balance on your own. Contact iTunes Store Support and seek their assistance. I believe that they can reset your balance for you.
https://expresslane.apple.com/Issues.action

Can not log in using Bi publisher template builder + word2007

windows xp++bi publisher template builder for word 11.1.1.3.0 +word 2007
I can not log in when i use template builder.
click log in ,a window pop up, enter username/password ,
nothing happened,
If i entered the wrong password ,it told me something wrong with the password.
but if i entered the correct password ,it stuck 。
what's wrong
Edited by: Cindy on 2013-4-12 上午3:15
Edited by: Cindy on 2013-4-12 上午3:15

at the begining clicked "log in " button , a error window showed up ,the message like " xxxx: Module_starter"
For correcting this, I run
F:\Documents and Settings\gxin>DEL /S /A:H /A:-H *.EXD
regsvr32.exe /u C:\Windows\System32\MSCOMCTL.OCX
regsvr32.exe C:\Windows\System32\MSCOMCTL.OCX
then,tried again, i could see the login window but new problem appeared...
Edited by: Cindy on 2013-4-12 上午3:36

I can't log into any of my online accounts after emptying my cache.

Ever since I reset Safari to empty my cache, history and such, I can not log into any of my online accounts,such as Safari, eBay,etc... I enter my username and password and click the sign in button and the page goes back to the log in page. I don't know what's going on with it.
Has anyone ever had this problem? If so, please let me know how I can resolve this problem. Thanks!

Hi
Welcome to Apple Discussions
Sounds like you broke the connection between your Password list and Keychain Access. What you may have to do is reestablish those passwords. First step would be to go to keychain access and remove the related entries. Then go back to Safari and access each site. After entering your password information, a prompt ought to appear about keeping the password on file. Select "yes".

I have a local carrier number, if i by a contract-free iPhone 6 can i swap the T-mobile sim that will be in the phone with my local carrier sim? in other words, IS the contract-free iphone also unlocked so it can be used with any carrier?

I have a local carrier number, if i by a contract-free iPhone 6 can i swap the T-mobile sim that will be in the phone with my local carrier sim? in other words, IS the contract-free iphone also unlocked so it can be used with any carrier?

The T-mobile phone is advertised to be SIM-free. This does NOT mean unlocked. Unlocked iPhone 6's are not yet for sale in the US.

How can i know about any users who log on sap last one month..all data and

Dear all,
how can i know about any users who log on sap last one month..all data and transaction code they used in a month.
Regards,
ASHUTOSH
9891595497

Dear Ashutosh,
I think your question is in the wrong forum. This is for SAP MDM related questions and answers. SAP MDM does not use Transaction codes. So you may not get much help here.
Please try posting your question in the ABAP forums and you may get the right resources to help you.
Thanks.
Siva K.

I've bought leather case for iPhone 4 with a magnet clip situated on the back side just above the "apple" label. Can it interfere with any signals or made other damage?

I've bought leather case for iPhone 4 with a magnet clip situated on the back side just above the "apple" label. Can it interfere with any signals or made other damage?

I have been using a leather case with a magnetic clasp for months. The only side effect is that I need to recalibrate the compass app when I use it. This is really not a problem since I don't use the compass app very often. I haven't encountered any other interference or problems.

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

TS2446 I had to reset my apple ID password now I can't log onto any of my apps, I have done all these steps same msg access disabled , How do I fix this...

I had to reset my apple ID password now I can't log onto any of my apps, I have done all these steps same msg access disabled , How do I fix this...

Hi kmkrodel,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues accessing iCloud on your Mac or iPad after a change in your Apple ID password, you may find the following article helpful:
iCloud: Account troubleshooting
On the other hand, if you are talking about sharing files from your Mac to specific apps on your iPad via iTunes, then this article may be of more use (Note: When using this function, you will only see apps that support file sharing, not all apps on the device):
iOS: About File Sharing
Regards,
- Brenden

Macbook pro will power up but cant log on any user. Buttons on keynoard work but nothing responds to curser.

Macbook pro will power up but cant log on any user. Buttons on keyboard work and light up etc. but nothing responds to curser. Have powered off manually and tried with powercord attached but still same problem.

Have you reset the SMC?
http://support.apple.com/kb/ht3964

Itunes error 0x80092013 - can't log into iTunes

I know there are a lot of posts on this error...itunes error 0x80092013. I can't log in. Apple please put this on the top of your list to fix. I can't log in, can't update my family's FOUR iTouch. Nothing was changed or installed before, during, or after the iTunes 10.6 update. Clearly it is an Apple issue.

I have got this error and have done quite a bit of digging.
Can you check the following folder:
C:\Users\<user name>\AppData\Roaming\Apple Computer\Logs (where username can be 'Joebloggs' etc).
In this folder there should be some log files. Double click on the most recent file. If you are getting the same problem as me and numerous other people there should be entries in this file similar to below:
[4652 @ Mon Mar 26 18:43:27 2012] [com.apple.iTunes iTunes.exe] CertVerifyCertificateChainPolicy failed with error 0x80092013
[6040 @ Mon Mar 26 18:43:27 2012] [com.apple.console APSDaemon.exe] CertVerifyCertificateChainPolicy failed with error 0x80092013
[4652 @ Tue Mar 27 00:00:05 2012] [com.apple.iTunes iTunes.exe] CertVerifyCertificateChainPolicy failed with error 0x80092013
Looking at this the problem is related to certificates and itunes.exe and apsdaemon.exe.
Interstingly I have noticed whenever I exit itunes it stays resident in memory (this can be checked by using task manager'). The only way for it to completely exit itunes is to end the process tree for apsdaemon.exe in task manager. Do you also get this problem? The reason I ask this is that a large number of errors have been reported with apsdaemon.exe as well.
A number of people have reported that the only way they have been able to sort this problem is either an itunes downgrade or a windows re-install.

Error 9808-Can't log in to store account

None of the posted Apple measures apply to me, as the security box in IE wasn't checked, no security changes have been made. I was able to log in yesterday and download a tv episode no problem, and then today when I see a new episode availible I go to buy it and find ERROR 9808-try again later. I've been at this for an hour! Please help!
I was just able to log in and start downloading a tv episode when the whole application froze. Now I can't log in again, same ERROR!
Message was edited by: KaraThrace

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
-Griff W.

[KDE & HAL] I can't log with KDM & HAL daemon doesn't work.

Hi all,
I opened a new topic because I found anybody who has the same problem. First, I can't log myself with KDM, when I type my password and press enter, it displays me a black screen en goes back to logging session...So I read a comment which is advised to log in with GDM, it works but it's not KDM... I noticed that dbus didn't launch, I fixed that with wiki explanations, but HAL still like that:
:: Starting Hardware Abstraction Layer [FAIL]
I think it is a bug of 64bit package, but I am not sure. (32bit version works)
So Have you any ideas ? Thanks for reply.
PS: sorry for ugly english. It's not my native language.
I simply rebooted when it solved the problem...
Last edited by skanarchy (2009-02-12 15:23:20)

I am having the problem logging on through KDM as well, was that what was solved by simply rebooting? Someone else is mentioning the problem here: http://bbs.archlinux.org/viewtopic.php?pid=514615

Pisuper Authorization error, I can't logged with any user on Int Builder

Similar Messages

Maybe you are looking for