Pitch and Pan Control

If you check out this page:
http://www.cratediggers.com/test.html
You will see the site I am working on. I would like to make
the far left fader control either the sound pitch or volume of the
buttons on the far right.
I would also like to control the sound pan of the buttons
with the wheel in the middle.
If anyone can supply and code or tips in making this work -
it would be much appreciated.
Thanks.
Michael

This is the code I have to make the fader move which I copied
from another fader:
sound.prototype.fadeup = function ( fadespeed, maxLevel ) {
var SndIntervalID;
clearInterval ( SndIntervalID );
SndIntervalID = setInterval ( this, "upOne", fadespeed,
maxLevel );
// BUMP VOLUME UP
Sound.prototype.upOne = function ( maxLevel ) {
varSnd = this.getVolume();
if ( varSnd < maxLevel ){
this.setVolume ( varSnd + 1 );
}else{
clearInterval ( SndIntervalID );
updateAfterEvent();
Sound.prototype.fadedown = function ( fadespeed, minLevel ) {
var SndIntervalID;
clearInterval ( SndIntervalID );
SndIntervalID = setInterval ( this, "downOne", fadespeed,
minLevel );
// BUMP VOLUME DOWN
Sound.prototype.downOne = function ( minLevel ) {
varSnd = this.getVolume();
if (varSnd > minLevel){
this.setVolume ( varSnd - 1 );
}else{
clearInterval ( SndIntervalID );
updateAfterEvent();

Similar Messages

  • Can I use pan control in stereo track and balance control in mono track ?

    it seems that in logic I can only use pan control in mono track and balance control in stereo track .

    This is a flaw from the first days of Logic.
    There is a "helper" plug in called "direction ....." - I can't remember the full name. Anyway, it gives you more control over stereo tracks. You can narrow the width (left - right) and pan accordingly.
    Hope this helps.
    HL

  • Controlling Sound Pitch and Speed

    So, I've seen an example of how to control sound Pitch and Speed in ActionScript 3.0, Andre Michelle » Blog Archive » Pitch MP3, but in this example the speed and pitch are being controlled together. Is there any way to control them individually?

    You can control them individually - look in the responses at #6 and #17

  • LabVIEW and custom controls

    Hi all,
    I'm an italian PhD student working with Polytechnic of Bari.
    I'd like to submit to this forum a question about LabVIEW and custom controls in form of ActiveX components.
    Some introductory word about my problem will be helpful: in the past few months here at Polytechnic of Bari my colleagues and I developed some useful ActiveX controls with custom functionalities to use in LabVIEW.
    For example we developed a "contraves", an
    "endless knob" and a useful counter with a scale very similar to that of standard gazometers or energy counters.
    However we are experimenting some difficulties with the integration of these controls in LabVIEW; the controls are correctly imported in our VIs with using the ActiveX Container but...
    in the block diagram they appear as ActiveX references and we must use property nodes to access even their most useful property (value).
    Please, do someone of you know if (and eventually how) is it possible to integrate more deeply the controls in the LabVIEW environment?
    Do someone of you know if it exist an hypothetical "Custom Controls SDK" for LabVIEW more advanced of that integrated in LabVIEW 6.0?
    Any hint would be appreciated.

    > Please can you specify in more detail how I can obtain the ActiveX
    > refnum input automatically wired to a constant (I have observed this
    > behaviour with the 3D-Graph control as you suggested). I haven't found
    > any reference in the LabVIEW on-line help about the topic "merge-VI".
    >
    The first step is to build a VI that contains the panel and diagram
    elements that you want to drop all at once. In your case, drop the
    ActiveX control at a good size, and on the diagram, you can wire it to
    helper VIs, property nodes, etc. The VI's icon and name are important
    as that is what will show up in the palette menu representing your
    control. The connector pane isn't used.
    With the VI constructed, you want to add it to the palette menu. In the
    Tools menu, Advanced, there is an item about half way down for
    Customizing the Palette menu. You will need to build a New Palette Set
    using the ring and name it whatever you like. You can now add your VI
    wherever you like. Most likely you will want to right click to add a
    new subMenu in the Controls palette and place it in a new .mnu file. In
    the subMenu, right click to add Control. The file dialog will open
    allowing you to select a control file to add to the palette. By
    changing the filter from .ctl to all, you can insert VIs into the
    controls palette.
    All VIs inserted into the Control palette will act as merge VIs, meaning
    that when dragged to a panel, the panel elements will be merged into the
    destination panel, and the diagram elements will be merged into the
    destination diagram.
    For others that want to have these on the Functions palette rather than
    the Controls, you add the VI to the Functions palette, then popup on the
    palette item and check the menu item to make it a Merge VI.
    When it comes time to distribute, you will want to give out your .mnu
    file and the VI of course. Easiest is to place both of them in
    user.lib. If you want the items to go at the top level of the palettes,
    then you can add them to add-ons inside of vi.lib, but this causes more
    upgrade challenges.
    Hope that helps.
    Greg McKaskle

  • After moving and resizing control, some controls don't redraw properly as the cursor passes over them.

    I have a top-level VI with three panes (two splitters).  One of the panes contains nested tab controls.  One of the tab pages contains six XY-graphs, a table and some decorations.
    I use a subVI to resize and relocate the tabs and contained controls.  All this is working fine, and everything looks fine after the resizing is complete.
    The problem is when the cursor passes over certain controls (the chart legends and the table column headers for example), they redraw with gray boxes.  The problem only occurs after enlarging the window from its minimum size.  It goes away if the window is resized back down to minimum.
    Anything that causes the window to redraw, like another resize or minimize/restore, properly refreshes the screen.
    Has anyone seen this problem, and have a workaround?
    The problem exists in development environment or built in LV 9.01 or LV 2010.
    Thanks!
    Matt Dennie
    Attachments:
    Resize Redraw Problem.zip ‏125 KB
    Resize Redraw Problem.JPG ‏210 KB

    Thanks again for taking a look at my problem.
    force redraw - This is apparently only available in LV2010.  I did give at a try, but it did not prevent the problem, nor did it correct the problem once the gray boxes appeared.
    disable updates (on a graph) - This apparently only applies to 3-D graphs, which is not what I am using in this case.
    disable front panel updates - I tried disabling updates before moving/resizing the front panel controls, then re-enabling updates afterwards.  The problem is exactly the same as before.  Once the move/resize is complete, passing the mouse over the table column headers or the graph plot legend results in the gray boxes.
    I would appreciate any other suggestions you may have. 
    Again... the problem is not that the moving and resizing don't work.  They work fine.  But once the resizing is complete, passing the mouse over the legend or table column headers causes gray boxes to appear.
    Thanks!
    -- Matt

  • The Pan controls change by themselves

    Hi.. I'm a fairly new Logic user and I'm having the hardest time with the panning.. Whether on a midi track or audio track, the pan control will move far left or far right at various times..
    Can't figure this out..Can anyone help?
    thanks
    Bryan

    You might want to check to see if a controller is sending pan events. On the Click & Ports page in the Environment check the Input View to see if there are unexpected events there.
    I've had controllers with pots that would send things like pan and volume events when I didn't want them to.

  • Re-setting pan control

    I am trying to adjust the pan setting on various tracks, but every time i revert back to the start of the track, the settings revert back to the previous level, i tried everything but as i am a bit of a novice with logic pro i need some help!

    I would select each track and look at the data in the "Event List Editor" where you can really see what is going on.
    Window / Open Event List (Cmd-7 in LPX)
    There may be some additional Pan Control data in there if you perhaps imported any music from an outside source.
    Just delete what you do not want. Select a line and hit delete.
    NOTE: Perhaps work on a copy of the project, just in case you make a mistake !!

  • Safari 5.1, OS 10.6.8 and cookie controls

    Ok, I know there are numerous threads here in the Mac Safari forum regarding the issue of Safari 5.1 and cookie control. I just thought I would start my own thread instead of continuing on something else.
    I am using Safari 5.1 and 10.6.8. I waited for a bit to update to 5.1 (did it this week), giving it since its debut on July 20th. I too am experiencing the lack of cookie controls. The three settings that exists do not seem to do what they say except that they always allow cookies.  To update from Safari 505, I downloaded the installer from Apple downloads instead of using SU function. 
    Has anyone read something that Apple knows of this issue? 
    Since installing Safari 5.1, I have done the last security update as well.
    I remember reading that reinstalling the 1.1 version of the 10.6.8 combo would replace Safari 5.1 with 505. But, has anyone tried that? Will Safari 5.1 show up in software update as well as the last security update? I am wondering if I reapply that combo if it will undo the last security fix as well (since I am assuming software update will still see the receipt for the previous ones and not call for them to be redone).
    If all cookies are coming through, isn't this a serious bug?  I have been resetting safari often to wipe them out, but they reoccur switftly.  I have to MBP's and am seeing the same behaviour on both.

    I'd use that terminal command - takes seconds (and a restart) + no download. But otherwise yes - the 10.6.8 v1.1 then the update & anything else software update picks up (not safari, obviously )
    Some people happily get a copy of just the safari 5.0.5 application & use that, since apparently it works, although I'm not sure what cookie function you'll get (easy enough to see). You'd use Pacifist to extract it from the 5.0.5 installer package, or grab it from a backup.
    Although you'd hope software update would catch the security change - I'm not sure if the combo would overwrite the new or not... on the one hand, it's newer, but on the other, it sure over-wrote safari 5.1 when i checked it... so better to be sure, I haven't checked since that update.
    If you look at the files in /System/Library/Keychains/ afterwards - if EVRoots.plist, SystemRootCertificates.keychain, and SystemTrustSettings.plist are all dated 23 April 2011, the combo rolled them back - if they're later... it didn't.
    Apple do know, since bug reports come back as 'duplicate of...' - but  there's no public info to my knowledge.
    How much of a security issue is this? Should I worry about it, or just leave it until they update to fix?
    more privacy than real security, I'd say - although there are add-ons to manage cookies.

  • Unable to initialize capture device and device control in HDV

    I shot with a Sony HVR-Z1U/Z1N and am using a Sony HDV 1080i tape deck to digitize.
    I recently purchased a MacBook Pro and installed FCP Pro 5 on it. After getting over some time code issues we were chugging along, when on the 4th tape the image on the log and capture screen suddenly dissapeared (I could get audio and could see the image on the tape deck). Well after taking the tape out, checking and rechecking it I popped it back in and ever since then, I have been getting this error mssg "Unable to initialize capture device and device control."
    I have tried deleting the preferences and starting from scratch. If I do that, and choose the easy setup with HDV- 1080i60, it gives me this error "Unable to locate the following external devices- HDV (1440 X 1080) 30fps.
    I upgraded to FCP 5.1.2 this morning and upgraded the OS to 10.4.7 and QT to 7.1.3 and still no change.
    Im at my wits end, Ive been working on this for a whole week now.
    Thank you,
    Bugs

    It has been reported to take more than one attempt to correct the installation but, if properly executed on a machine without other system problems, the QT reinstall process does work. The key element here is you must reinstall QT after you trash the receipts. The process is listed below.
    x
    To do a full quicktime reinstall.
    Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
    Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
    Run the Quicktime installer.
    Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
    Reboot
    If this doesn't work, then the problem lies elsewhere:
    1. your system - user preferences, firewire ports or other system elements.
    2. your equipment - camera/deck/firewire cables.
    3. your process - not setting up the software properly or using the software erroneously.
    Listed below is a troubleshooting process. Not all steps are appropriate but the general process of isolating the problem is useful.
    Troubleshooting Steps for OS X
    by Jan Johannsen (Collected from: Apple>User Tips Library>User Tips Contributions forum)
    FIRST AID
    01 Completely shutdown, wait a 5 minutes, restart
    02 Make sure you're not running out of free space on the System volume
    03 Check/fix the filesystem using Disk Utility &/or Diskwarrior
    04 Repair permissions using Disk Utility
    05 Create a new user account, and see if the problem persists there
    06 Clear system & user caches
    07 Run FCP Rescue
    08 Unplug all USB, Firewire devices except Apple mouse
    09 Startup in SafeBoot mode, and see if the problem persists there
    10 Reset system firmware
    MORE SERIOUS TROUBLESHOOTING
    11 Reapply the latest combo updater
    12 Run the Apple hardware diagnostic CD
    13 Check the hard drive for bad blocks
    14 Take out 3rd party RAM
    15 Unplug 3rd Party PCI cards
    16 Reset PMU
    17 Archive and reinstall the OS
    18 Reinstall the system from scratch
    19 Send the machine back to Apple

  • Unplugging all network devices from Fios router prevents DVR freezing and remote control lock ups.

    All,
    I recently had a Verizon tech visit my house due to constant DVR and remote control freezing. TV content was freezing whether it was locally recorded, pulled from another DVR in the house, or On Demand. On a hunch after the tech tested everything and was about to leave, he unplugged my gigabit switch from the Fios router. Lo and behold everything started running perfectly. Since to the tech, the problem was solved, he closed the case and was on his way. The probem is of course I have more devices than the built in router switch provides ports for. My network is compised of an 8 port Netgear gigabit switch downstream from the Fios router with two wireless access points (with their own built in gigbait switches) connecting to the Netgear gigabit switch. There are no loops in the switch topology. I've tried changing out the router, the gigabit switch, removing the wireless acces points individually as well as plugging the access points directly into the Fios router switch (one at a time with no Netgear switch in the middle) and all scenarious cause the DVR/remote control freeezing to come back. The only devices I can plug into the Fios router without causing freezes are PC's....anything with it's own switch essentially brings the network to it's knees. If anyone has an idea how to get my network back in one piece AND make the DVR's/remotes behave, I'd greatly appreciate the help!
    My Fios equipment:
    MI-424WR GEN-3I  rev I (eye) running firmware 40.19.36
    5 Motorola HD-DVRs all QIP 7232-2 running software release 1.9.1 platform build 25.39 (Oct. 22, 2012)
    Specific config:
    75/35 Fios connecting via ethernet from ONT. Set-top boxes connect to Fios router coax port via powered splitter.
    *All SNR/dB mesasurements taken by the tech from the set-top boxes and router are well within spec.
    Fios router provides DHCP addressing. Wireless N access points are configured for roaming with the same SSID and non-overlapping channels. Access points are not providing routing or IP adressing...all layer 3 and up services still provided by Fios router
    Diagram:
    ONT
      |
    Fios Router ---------Cable Splitter---------Set Top Boxes
      |
    Netgear Switch
      |           |
    WAP1    WAP2

    WayfarerII wrote:
    ... DVR ... remote ... freezing ... TV ... whether ... locally recorded, pulled from another DVR ... 
    ... tech ... unplugged my gigabit switch from the Fios router ... and ... everything started running perfectly ...   
    ... config:
    75/35 Fios ... via ethernet from ONT ... Set-top boxes connect to Fios router via powered splitter ...
    ONT
      |
      | cat5
      |
    Fios Router ---------Cable Splitter---------Set Top Boxes
      |
    Netgear Switch
      |           |
    WAP1    WAP2
    I am inclined to echo several of the "tns" comments, particularly with respect to your splitter.  My layout is based on a standard 8-port splitter of the type usually supplied in a VZ install.  In addition I do have a ChannelPlus device that functions as a powered splitter, but its use is limited to distribution of secondary TV signals to older analog TVs.  My first point then is that this may be an offender as "tns" has suggested.
    In addition, I'd describe your wiring as "non-standard" (red-colored items in the above diagram)  As you're no doubt aware, with 75/35 you don't really need Cat5e from the ONT (your original diagram).  It seems the highest tiers do require it, but in "standard" installations this run is coax directly to an 8-port non-powered splitter (below diagram), then from that splitter via coax to all STBs and CableCards, other TVs, et.), and also to the Actiontec.   Subsequent feeds from the Actiontec to wired devices (including WAPs) are via Ethernet (typically Cat 5e).
    In fact I don't immediately see how your STBs get additional services such as On Demand and IMG with the wiring shown in your diagram (perhaps someone can help me out here).  In "standard" installs the Actiontec must be connected via coax to the ONT to provide such services to other network clients.  I don't see that requirement being met here.
    For starters I'd recommend that you change your service from WAN Ethernet to WAN coax.  This can easily be accomplished over the telephone.  Then I'd run coax directly from the ONT to the Actiontec as in my revised diagram below (blue-colored items).  If your setup can manage with this arrangement, I think it will help greatly with the "freezing" issue.
    ONT - - - - - - coax - - - - -
                                             |
    Fios Router --- coax--- Standard 8-Port Splitter --- coax --- Set Top Boxes
    |cat5
    Netgear Switch
    |cat5           |cat5
    WAP1 WAP2
    Subsequent Note:  You provided additional info while I was composing a response, and I'd  like to offer another comment.  Structured wiring "panels" of the type usually available are pre-configured to provide data, phone and video.  This usually means that one is in certain respects limited by the ideas of the panel designer.  I have what can be called a structured wiring layout, but it really is composed of individual small custom networks for  each service (automation, security, video, data, telco, etc.), configured so that all wiring terminates in "home run" fashion at a central panel (a few details here: http://forums.verizon.com/t5/Home-Networking/Cmon-Show-Us-Your-Network/m-p/481733#M765 ).  This layout makes it easier to make adjustments (and there have been quite a few over the intervening years).  I'm thinking that in your case you may have to abandon the powered splitter (presumably) built into the panel in order to avoid your present fix.
    Subsequent Subsequent Note:   From your description it seems that you are using more than a single "whole house" DVR to supply programming to other devices.  This is a bit puzzling to me because somewhere along the line I recall reading that only a single whole house DVR was allowed on the network.  Can you elaborate a bit?

  • High pitched and prone to breaking up phone calls via Continuity through iPhone 5s on computer end

    On my Mid 2011 Mac mini running OS X 10.10, when I attempt to call someone through my iPhone 5s, the sound is extremely high pitched and prone to breaking up on my end. It sounds fine on the other end, when I use my iPad 2, and when I just call on my iPhone. Any idea why? Sound recording of my voicemail login prompt from my Mac: https://mega.co.nz/#!ocRWgLoD!P-Ps_mHRgXAag1jfaYPU2ZpGfECVP2YR9Z-E4G4Z4Sk

    I'm experiencing the same issue between my 5s (8.0.2) and my late 2012 Mini (10.10).  It reminds me of the kind of sounds you get with digital audio clocking issues between devices.  I've scoured the internet, tried several different solutions, and nothing has worked yet.

  • PDF and Print Control in Reports.

    Dear All,
    I want to set particular format for every report in PDF and Print control option like want to place client's logo in header and page number and date in fotter , how can i achive this,is there any way we can set it globally coz doing on every report is very time consuming.
    Regards,
    Tarang Jain

    You need Firebug....to know how your Dashboard works!!!!!!
    Check these 2 blogs and play.....
    http://oraclebizint.wordpress.com/2008/01/03/oracle-bi-ee-101332-customizing-download-links/
    http://oraclebizint.wordpress.com/2007/10/26/oracle-bi-ee-101332-styles-and-skins-firebug-to-your-rescue/
    i hope i helped....
    http://greekoraclebi.blogspot.com/
    Close the question.....and add a new thread...
    Give if you wish the appropriate points...

  • How to add a field and table control to BP transaction.

    Hi,
    I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
    Can some on please help me if having a solution and with any relavant documents.
    Thanks in advance.
    Raj & Khader.

    Also explore with EEWB tcode.
    Refer this threads
    Re: EEWB
    Created New fields in Business Activity with EEWB
    Cheers
    Manohar

  • How to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

    how to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

    Hi bluegrandpanash,
    Thanks for visiting Apple Support Communities.
    If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Best Regards,
    Jeremy

  • How can I have a canvas and external controls at the same time?

    Typically all the space of an applet is used for 2D or 3D; that is, the applet provides the canvas. I am trying to develop an applet where I only want to use part of the applet space for 3D, and then, outside that space (but still within the applet) I would like to add some controls (e.g. buttons or text fields) to provide some interaction. In other words, I want to have an applet that contains something like a frame for 3D, and some controls outside the frame.
    It may be quite easy, but I am very new to applets. Can anyone kindly give me some suggestions? Any help is highly appreciated!
    Regards,
    Hua

    I got it figured out. Thanks anyway!

Maybe you are looking for