Pitch Correction strange problem.

Hi, hope you can help me out with this. I use Pitch Correction (guess I´ll have to wait a couple of years before Antares releases universal....) and I only use it where I need it. I bypass it and turn it on with regular and simple automation. BUT! Some crackles does appear the seconds before the plug shall turn itself on, and also the second before it shall be bypassed. This is the only plug that does this and it is very frustrating! I run a Macbook Pro with 2 G RAM and I´ve tried to set down and up buffer sizes and rebooting, reset my FirePOD and turned plugindelay compensation on and off but nothing makes any difference. Any ideas to this? I run 10.4.7 and Logic 7.2.2. Thanks.
Macbook Pro 2.0 Mac OS X (10.4.7) 2 GB RAM, PreSonus FirePOD

Strangely, I dont 'have this problem, and I'm still running LP 7.1.1.
Your suggestion, Melissa, would have been my easy and first one as well. Since you posted now, as expected, because you talked about pitch correction more often here already, there is one big concern about the method of duplicating the channel strip settings only for the "pitch correction track":
How do you compensate for the loss of high frequencies when using "Pitch Correction"?
There is definitely a significant and audible alteration in the frequency range happening when using this (and most other) plug-ins. Therefore the results are not "seamless".
Not that I want to call myself a technical expert, but I've been doing pitch correction since the early '90s on a Synclavier, and today use Melodyne, and before that the Pitch Correction plug in within LP. However, on LP, I quickly switched to Pitch & Time, using my own ears again - and achieving far better results.
The answer (and I am asked to correct a lot of vocals) is never the same with different voices, even not with different keys and the same voice.
This entire subject might be worth another thread, so, by keeping it simple, in order to make this suggestion (duplicating the channel strip settings and copying the regions that need pitch correction) work, - and this is really ballpark only, just to get the original poster somewhere ahead - I found, that using a High Shelf Filter around 10kHz with a Gain of +3dB and a Q-Factor of 0.40, followed by a 12dB High Cut Slope around 18kHz with a Q-Factor of 0.60 works pretty nicely in compensating for the frequency loss occured when using the LP plug-in "Pitch Correction". Take it from there for your individual tunes, keys and singers.
New thread, anyone?
... and of course: don't forget to right great music (in tune or not, lol)

Similar Messages

Hello, starting with today I have a strange problem: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file.

I am having a strange problems on the Data entry Forms

A form that has been used since 2005 in an old version of HFM 3.51 was migrated to SYstem 11.1.2.1 in January of 2012 and has been working since then. Suddenly we start having some strange problems. Our response time has been very slow and I am wondering if there were some problems in any of the services. Maybe a service did not start properly related to the WEB forms.
We entered a number in one of the cell to be: 348336349 as soon as we hit enter, the number was formatted to 348,336,349 but when I submit the number it came back as 3. I tried it several times and it did not work, I checked the scaling and that was set blank. One of my user tried it and it did not work. I tried looking into the Preferences and my screen froze. In the meantime one of my user was able to enter the number and was able to refresh it as well. Then she enter another number on a different cell and the same problem occurred it seemed as if it truncated all the digits except for the left most digit, we are unable to figure out how to resolve this issue. The number entereed in the cell is 826,251,218 it stores 8 and loses the rest of the 8 digits. I right click and checlk the properties and it says that it has stored 8 instead of 826,251,218.
Following is the DEF script. Does anyone has any ideas, I am wondering if I have to restart the services..
ReportType=WebForm
ReportLabel=Aging_Receivables
ReportDescription=Aging Receivables
Instructions=Please make sure you set up your point of view (POV) appropriately. Business Unit (BU): AG, CE and Other_BU. Brand: Case, NH and Other_Brand.
BackgroundPOV=S#Actual.Y#2011.P#Jan.w#YTD.V#<Entity Currency>.I#[ICP None].C2#SERVICED.C3#GL_INPUT.C4#Input
SelectablePOVList=S{[Hierarchy]}.Y{[Hierarchy]}.P{[Third Generation]}.E{[Hierarchy]}.C1{[Base]}.C2{[Hierarchy]}.C3{[Base]}.C4{GL.[Hierarchy]}
C1=A#Current
C2=A#0_To_30
C3=A#Total_Current
C4=A#31_To_60
C5=A#61_To_90
C6=A#91_To_120
C7=A#121 Plus
C8=A#Total_Past_Due
C9=A#Total_Aging_Rec
C10=A#Current_OffBook
C11=A#Past_Due_OffBook
C12=A#T_Aging_Rec_OffBook
C13=A#Total_MP_Aging_Rec
C14=A#Aging_Rec_Diff
R1=C1#_Retail
R2=C1#_Wholesale_Tot
R3=C1#_Wholesale
R4=C1#_Wholesale_Natl
R5=C1#_Wholesale_Othr
R6=C1#_Credit_Card
R7=C1#_Specialized_Lending
R8=C1#_Marine
R9=C1#_Soris
R10=C1#_Other
R11=C1#_Material
R12=C1#Sup_Product
FormInputBoxLength=23
PrintNumRowsPerPage=33
PrintNumDataColsPerPage=8
ShowLabels=False
ShowDescriptions=True
SuppressColHeaderRepeats=False
Edited by: user8267293 on Aug 8, 2012 12:41 PM
Edited by: user8267293 on Aug 8, 2012 12:43 PM

Hi,
Did you find a way to solve your problem ? We have exactly the same for one application and we are using the same version of HFM : 11.1.2.1.
This problem is only about webforms. We can correctly input data through Data Grids or Client 32.
Thank you in advance for your answer.

Strange problem for Acrobat 9.4.1

Hi, guys,
I encounter a strange problem. Since I have a 12'' laptop, to have a more comfortable view, I magnify my view to 125% by using the option in Windows 7
Then, under the 125% magnification environment, if I use the Acrobat to print out the webpage, it looks like the pdf file can't be correctly generated.And the auto-open function cann't open the file afterwards.
But I swith all the display to 100%, all the problems are gone.
Could anyone help me to explain why this happens and how to resolve this problem?
Thank you very much for helping me
Xuqing

Anyone can help me with that?
Thanks a lot

Strange Problem with File Content Conversion (Sender)

Hi,
I have a strange problem. I have a sender file adapter with content conversion (csv -> xml). The adapter produces the following error during the processing...
- 2006-02-06 16:34:00 CET: Error: Conversion of part of file content of 'OE_Extractor_47_ISW112_SC-Ireland.csv' to XML format failed around position 1202: IOException: Stream closed
After the 4th or 5th try the adapter processes the file correctly.
Why does it works after several tries and not at the first time? (The file is not changed during the adapter is trying to convert it)
Thanks
Thomas

I found the problem, something was wrong with the ftp server

Strange problem in applet application

Hello Everybody,
I hava an applet whit an image. This image has to changed by color, and text has to be added to the image. The text color is also changable. Here is where it goes wrong.
When I change the background color of the applet, the transparant image will be colored. This is good.
At the start text can be added.
When you change the textcolor, the frame with the JColorChooser will get at the background of the image, like this:
[http://schaftwagen.ncamade.nl/schaftwagenfout.png|http://schaftwagen.ncamade.nl/schaftwagenfout.png] (image)
When you change the text with the "opschrift" button (vertical text) the old text stays under the new text.
When you change the background after this, everything seems to be okay.
At an other forum I've asked this question, and some of that people didn't had this "problem". I am using Windows 7RC with the newest java version. Tested it on an Windows vista and Windows XP all with the same problem.
The source is to big for this forum and can be found at [http://www.dreamincode.net/forums/showtopic117029.htm|http://www.dreamincode.net/forums/showtopic117029.htm]. This is the other forum, where I've asked about his issue. (I hope this link isn't against the rules to post this link to the other forum?)
I hope someone can help me with this problem. The applet can be tested here: [http://schaftwagen.ncamade.nl/colorchooser.asp|http://schaftwagen.ncamade.nl/colorchooser.asp]
Greats,
C.H.F.S.
Edited by: C.H.F.S. on Jul 28, 2009 4:01 AM

I've just tested it on different boxes, and sometimes it does work indeed, but sometimes other problems come up. On one the background color doesn't change but the text color does it right and changing the text work also correctly in that case.
Can anyone help me please solving this strange problem?

A very strange problem in netbeans

i debug a project in netbeans,a a very strange problem happens.
a member variable was different between wtk20 and wtk22.and the variable was changed many places so it's hard to trace!
but there hasn't the problem when i debug project in jbuilderx!

My problem is, even I've written the SQL in the correct syntax, in my java code, it just look like this
adc.SQL("insert into test(subject, content) values('" + sf.filter(subject.getText()) +"'"
                              + "," + "'"
                              + sf.filter(board.getText()) + "')" );
                              subject.setText("");
                              board.setText("");
where subject is a textfield and board is a JTextArea and sf is a string filter which use regular expression, I basically want to insert the string in these component into the database, Many strings work, but client for updates can't be inserted.
With my best,
Zike Huang

Strange Problem with a Vector wraped inside a Hashtable

Hi all ,
I'm having a strange problem with a Vector wraped within a Hashtable inherited Class.
My goal is to keep the order of the elements of the Hashtable so what I did was to extend Hashtable and wrap a Vector Inside of it.
Here is what it looks like :
package somepackage.util;
import java.util.Enumeration;
import java.util.Hashtable;
import java.util.Vector;
public class OrderedHashTable extends Hashtable {
 private Vector index;
 /** Creates a new instance of OrderedHashTable */
 public OrderedHashTable() {
 this.index = new Vector();
//adds a key pair value to the HashTable and adds the key at the end of the index Vector
 public synchronized Object put(Object key,Object value){
 index.addElement(key);
 Object obj = super.put(key,value);
 System.out.println("inside OrderedHashTable Put method index size = " + index.size());
 return obj;
public synchronized Object remove(Object key){
 int indx = index.indexOf(key);
 index.removeElementAt(indx);
 Object obj = super.remove(key);
 return obj;
public synchronized Enumeration getOrderedEnumeration(){
 return index.elements();
public synchronized Object getByIndex(int indexValue){
 Object obj1 = index.elementAt(indexValue);
 Object obj2 = super.get(obj1);
 return obj2;
 public synchronized int indexOf(Object key){
 return index.indexOf(key);
 public synchronized int getIndexSize() {
 return index.size();
 }Everything seemed to work fine util I tried to add objects using a "for" loop such as this one :
private synchronized void testOrderedHashTable(){
 OrderedHashTable test = new OrderedHashTable();
 for (int i = 1 ; i<15; i++){
 System.out.println("adding Object No " + i);
 String s = new String("string number = "+i);
 test.put(new Integer(i),s);
 System.out.println("-----------------------------------");
 //try to list the objects
 Enumeration e = test.getOrderedEnumeration();
 while (e.hasMoreElements()){
 Integer intObj = (Integer) e.nextElement();
 System.out.println("nextObject Number = "+ intObj);
 }Here is the console output :
Generic/JSR179: adding Object No 1
Generic/JSR179: inside OrderedHashTable Put method index size = 1
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 2
Generic/JSR179: inside OrderedHashTable Put method index size = 2
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 3
Generic/JSR179: inside OrderedHashTable Put method index size = 3
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 4
Generic/JSR179: inside OrderedHashTable Put method index size = 4
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 5
Generic/JSR179: inside OrderedHashTable Put method index size = 5
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 6
Generic/JSR179: inside OrderedHashTable Put method index size = 6
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 7
Generic/JSR179: inside OrderedHashTable Put method index size = 7
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 8
Generic/JSR179: inside OrderedHashTable Put method index size = 8
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 9
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 10
Generic/JSR179: inside OrderedHashTable Put method index size = 11
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 11
Generic/JSR179: inside OrderedHashTable Put method index size = 12
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 12
Generic/JSR179: inside OrderedHashTable Put method index size = 13
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 13
Generic/JSR179: inside OrderedHashTable Put method index size = 14
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 14
Generic/JSR179: inside OrderedHashTable Put method index size = 15
Generic/JSR179: -----------------------------------
Generic/JSR179: nextObject Number = 1
Generic/JSR179: nextObject Number = 2
Generic/JSR179: nextObject Number = 3
Generic/JSR179: nextObject Number = 4
Generic/JSR179: nextObject Number = 5
Generic/JSR179: nextObject Number = 6
Generic/JSR179: nextObject Number = 7
Generic/JSR179: nextObject Number = 8
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 10
Generic/JSR179: nextObject Number = 11
Generic/JSR179: nextObject Number = 12
Generic/JSR179: nextObject Number = 13
Generic/JSR179: nextObject Number = 14
You can notice that the output seems correct until the insertion of object 9.
At this point the vector size should be 9 and the output says it is 10 elements long ...
In the final check you can notice the 9 was inserted twice ...
I think the problem has something to do with the automatic resizing of the vector but I'm not really sure. Mybe the resizing is done in a separate thread and the new insertion occurs before the vector is resized ... this is my best guess ...
I also tested this in a pure J2SE evironment and I don't have the same strange behavior
Can anybody tell me what I am doing wrong or how I could avoid this problem ?
Thanks a lot !
Cheers Alex

Am i doing anything wrong?Uhm, yes. Read the API doc for addElement() and for addAll()

A strange problem in smart form?

Hi,
   I met a strange problem in my smart form. When I click "Check" button in each window of each page, system said "Window (my window name) does not fit onto page(height)". Even I create a new page and a new window in it, it still said this error when I click "Check" button in the new window.
   I have tried to enlarge or reduce the window's size, but this error still occured. But I can activate the form correctly. And there is a syntax error in the generated program:
   FORM %EV2.
    LOOP AT INTO .
    CALL FUNCTION 'SSFCOMP_TABLE_ROW_BEGIN'
    EXPORTING I_LINE_TYPE = 'LINE2'
You can see there's an error in loop statement.
Could you tell me the reason and how to solve it?
Thanks a lot!

hi
good
as you have maneioned in your error you have said that you have created your own window,but the check box as you mentioned which check box that it it is output options tab check box or in the condition tab check box.
in the general attribute select the secondary window from the dropdown box and output options tab select the page size as you need .
i hope you will get some output .
thanks
mrutyun

Very strange problem: Error for Overall result due to a custom infocube?

Hi,
I have a strange problem:
In my query the sumgt function doesn't work for the calculation of a percentage (es: 'KFA' %A SUMGT 'KFA').
The coloumn of the formula is full of red X.
Using Nodiv() the percentage are all zeroes.
I use a custom infocube for this query that is a copy of an infocube standard with some other infoobject custom. In the infocube standard the formula work and the sumgt is correct!.
It is possible that there are some parameter to be set at infocube level that make the SUMGT wrong?
I'm sorry for my poor english,
Alberto
Message was edited by:
        Alberto Maggini

Alberto,
               Your problem might be a UNIT problem. If you are using key figures in a formula with different units, you will have the "red X" outcome.
               Try using the NODIM() function in each formula element.
Regards,
L. Felipe

Asynchronous XI- RFC and RFC- XI scenario - strange problem

Hello XI-Xperts,
I've come to really strange problem, which I would like to share with you and possibly get an explanation.
I have an asynchronous scenario with ending XI->RFC. The RFC function in R/3 has got an optional parameter called SENDER, which when is filled, the another asynchronous RFC->XI scenario should be started. (via ABAP code CALL FUNCTION 'Z_XI_RETURN' DESTINATION gc_xi_destination ... etc.)
Now, the direction XI->RFC is configured properly, but the way back NO(!). Anyway I thought that it wouldn't make me a trouble, because those two scenarios are IMHO absolutelly separated. So I'd presume that the the data should come to R/3 without problem, it should be processed, and in case the parameter SENDER is filled the R/3 would establish the RFC connection and the "return data" should go back in different XI thread.
Well I would think like that but the situation is different:
When the parameter SENDER is empty, all goes OK and I can see in Runtime Workbench Message Monitoring - Adapter engine - Detail - Audit log only "successes". But when SENDER is filled with a value and R/3 does CALL FUNCTION with DESTINATION to a non-existing Sender agreement, the R/3 apparently doesn't send a acknowledgement to Adapter Engine of first thread XI->RFC. Intstead of that there are three messages in audit log:
MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_FIDATA_INPUT in remote system (RfcClient[IS2RFC_SAP_BG]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, di: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception w

Basically I understand what is happening on the background, but I really can't go over my persuation that in case of the ASYNCHRONOUS SCENARIO this should not happen.
Or is the RFC call (I mean XI->RFC) "pseudo-synchronous" even in asynchronous scenario ? I mean that Adapter engine waits for the result of RFC everytime ... ?!
Thank you
Tomas

Hello again guys,
so I've understood it on the end. My ABAP code didn't contain EXCEPTION part of CALL FUNCTION statement.
CALL FUNCTION 'Z_XI_RETURN'
 DESTINATION gc_xi_destination
 EXPORTING
 <PARS>
 EXCEPTIONS
 communication_failure = 1
 system_failure = 2.
Without it the RFC short-dumped and AE correctly tried to call it 1+3 times. The thing, that the problem was connected to XI related topic, tricked me. Well it's smart, I must admit on the end
Reward points for interest.
THX Tomas

Strange Problem - Cluster of References

Hello guys
I had a strange problems using a cluster with references.
How to reproduce the problem:
- open a blank VI;
- create two graphs in the front panel;
- in the block diagram, create references for both graphs;
- connect these references to a bundle (not bundle by name);
- create an indicator for the bundle;
- run the VI once;
- right click on the bundle indicator and change it to a control;
- delete references and bundle;
- select the control in the front panel, go to EDIT, CUSTOMIZE CONTROL;
- change to strict type def;
- save this control as Control1.ctl;
- connect the control to a unbundle by name;
- right click on the unbundle by name and select one of the two graphs as an item (doesn't matter which one you select);
- create a property node and feed its reference terminal with the reference from the unbundle by name;
- use the property "Label.Text" in the property node;
- create an indicator for the the property node;
- run the VI;
- the indicator will show the correct label for that graph;
- perfect!!!
If you save the VI and run it again, everything is fine.
But............... if you close it, open again and run.... you will get an error 1055 "Object reference is invalid".
Why it was working before closing?
Find attached the VI and the Control.
Thanks
Dan07
Solved!
Go to Solution.
Attachments:
Cluster References.vi ‏11 KB
Control1.ctl ‏7 KB

Let see if I can answer before I have to start working.
Do a quick experiment.
Use a Type cast to cast your ref as a U32 and show that value on the FP.
Save the VI run it and record the number on the FP.
Mod the vi save it clsoe it open it and run again. The number should have changed.
That is the issue you facing, the ref number changes so you need one that is valid when you run.
How I do it;
I use an Action Engine (see this Nugget to learn what an Action Engine is) that servse as a GUI controller and lets me get at refs where even I need them. The following is a case study.
First I collect all of th refs I will need and bundle them in a type def. I sue a state machine to do the bundling if there are a lot.
THe bundled clsuter get passed to an GUI Controller Action Engine
Inside the Init I check the refs to make sure they are vlid. THis has saved a lot of wated time chasing invalid refs.
If they were valid I cache the refs.
For major mode changes that demand a lot of GUI punching I create sub-VI to do the dirty work.
When ever other codes needs a ref to the GUI I have a method that returns the refs.
THe following shows another VI using those GUI refs.
I hope that helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Strange problem with forms. browser does not send syn

We are having a strange problem and I hope someone can help (im
stumped).
setup
I have a webserver (iplanet 4.1 sp8) running in secure mode. It has a
weblogic nsapi plugin and forwards EVERYTHING over to an app server.
The app server runs weblogic 4.5 sp10 and hosts both servlets and
static html for an application we are developing.
customers load a long form and are given the ability to upload several
files, but upon pressing the submit button on the form (they must do
each file individually) we get an error message that the page cannot
be displayed.
upon investigation, I look at a tcp trace and find that when the
submit button is pressed, the browser sends an ack packet to the
netscape server and it responds (correctly IMO) with a rst flag.
Why doesn't the browser start communication with a syn/syn-ack/ack
sequence? The form appears to have been completely loaded.
To aggravate matters more, this problem does not always occur and
clearing the browser's cache seems to aggravate it.
I would appreciate ANY help that could be offered.
sorry for the long post,
-Chris
Chris Regenye
Supervisor Systems Services
PR Newswire
[email protected]

In article <[email protected]>,
Chris Regenye <[email protected]> wrote:
Barry Margolin <[email protected]> wrote in message
news:<vzdh7.8$5%1.649@burlma1-snr2>...
In article <[email protected]>,
Chris Regenye <[email protected]> wrote:
We are having a strange problem and I hope someone can help (im
stumped).
setup
I have a webserver (iplanet 4.1 sp8) running in secure mode. It has a
weblogic nsapi plugin and forwards EVERYTHING over to an app server.
The app server runs weblogic 4.5 sp10 and hosts both servlets and
static html for an application we are developing.
customers load a long form and are given the ability to upload several
files, but upon pressing the submit button on the form (they must do
each file individually) we get an error message that the page cannot
be displayed.
upon investigation, I look at a tcp trace and find that when the
submit button is pressed, the browser sends an ack packet to the
netscape server and it responds (correctly IMO) with a rst flag.
Why doesn't the browser start communication with a syn/syn-ack/ack
sequence? The form appears to have been completely loaded.It may be trying to reuse a persistent connection, as recommended in
HTTP/1.1.Great, but the server obviously doesn't believe this is the case. Any
idea how to correct this situation? also... as I mentioned this
problem is intermittant(sp?). When it does not occur, tcp
communications are normal.It sounds like the bug is in the browser. When it gets the RST, it should
realize that the old connection has been dropped (even if a server
implements persistent connections, like it should, it's allowed to close
idle connections after a timeout or if it's running out of resources).
When that happens it should automatically retry on a new connection.
This might explain why the problem is intermittent. The browser is happy
when the connection has remained open, but it doesn't handle the occasional
cases where the server has closed the connection unexpectedly.
Barry Margolin, [email protected]
Genuity, Woburn, MA
*** DON'T SEND TECHNICAL QUESTIONS DIRECTLY TO ME, post them to newsgroups.
Please DON'T copy followups to me -- I'll assume it wasn't posted to the group.

Strange problem with 2 different Soundblaster car

I have a very strange problem with these 2 cards First i had soundblaster li've value which was installed with the default windows drivers. Although it'swas installed correctly in device manager, i hear no sound and when i go to control panel->sounds and audio devices, under the volume tab there?was no audio device and everything?was greyed. But when i restart or shutdown the pc the windows sound suitable for this action played without problems. Media player couldn't play any sound, neither youtube. I downloaded and installed the Li'veDrvUni-Pack(ENG). Everything worked ok but after a while i had the same problem. So i decided to buy a different sound card, the Li've Audigy SE. Installed, worked fine, but after a short period of time i have the same problem. Most of the times when i boot into Windows the sound is ok, after a while (5 minutes or hour) i hear no sound and in the control panel i see the no audio device message although in control panel the card appears to be installed correctly. Any ideas?

Yes, I agree.
But my question: is there any software trick that I could use to fix the situation.
For example, how can I ask 2 keyboards about each one's NumLock state ?
I know about getLockingKeyState() function, but it always returns the NumState of the regular keyboard. How can I know and/or change the NumLock state of the small one ?
Thanks

Strange problem with linking to external vob-file

I have a strange problem with linking to external vob-file. I
have created a link using BudApi:
on mouseup
set OK = baOpenFile ( the pathname &
"Files\General\Video\VTS_01_1.VOB", "normal")
end
This code opens mpg-videos correctly, but nothing happens
when I try to open vob-files with the same code. The strangest
thing is that when I change the default program for vob-files to
WinDVD this code works and the file opens, but when I change the
default program to Nero Showtime this code doesn't do anything
(when I open the file 'manually' from the folder, it opens
correctly on Nero Showtime). My client uses Nero Showtime, so I
really would appreciate any help on this one.

temes wrote:
>
quote:
Originally posted by:
Newsgroup User
>> When using Nero Showtime as a default program, the
error code is 31,
>> "There is no application associated with the given
filename".
>
> Which suggests that something has gone wrong with file
associations.
> If
> you double-click one of these files in an Explorer
window does it fire
> up Showtime and open the file?
>
>
> Yes, the file opens correctly in Nero Showtime when
double-clicking
> it in an Explorer. I tried the file associations and
created a
> html-page with a link to the vob-file, and the html-link
opens the
> vob-file correcly with Nero Showtime. My client reported
this
> problem, so it's not just my computer which is having
this problem.
If you open a command prompt, do you get an association
listed like this
example for .txt files:
C:\>assoc .txt
.txt=txtfile
C:\>ftype txtfile
txtfile="D:\Program Files\JGsoft\EditPadLite\EditPadLite.exe"
"%1"
Andrew

Pitch Correction strange problem.

Similar Messages

Maybe you are looking for