PIV II Contactless Smart Card Support with Blackberry 10 Devices?

I've seen documents describing NFC smart card support and ISO 14443 compliance in Blackberry 10 software and devices, but this doesn't really make it clear... Does the NFC support in BlackBerry 10 devices allow it to use certificates on a PIV II contactless smart card (which follows ISO 14443) for signing and encryption of e-mail? (without needing the separate Bluetooth-connected BlackBerry smart card reader)

OK, undestood, I am neither of those. Just a user.
POP email does not push instantly. I will tell you what another user here commented in another thread... any business now a days that is still on POP email is somewhat like using candles to light your offices. You need to be on IMAP.
Perhaps you can check and see what it would take to convert. In most cases, it should be simple.
And if you do, ASK if that IMAP has PUSH enabled.
Or in naval terms... like sticking with a sail as the lastest technology when steam propulsion is available.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Compiling rdesktop with Smart Card support?

Hello,
I've tried like the dikens to compile "rdesktop" (an open source solution to connect Windoze PCs using Microsoft RDP protocol). I can compile and run the source code, but I find it impossible to compile in smart card support. I've tried everything to get the "pcsc-lite" components to compile in - but I'm too much of a makefile noob I'm afraid.
Anyone know how to do this?
There's a related discussion at http://discussions.apple.com/thread.jspa?messageID=8652963.
Any help appreciated
~Matt

Hi,
Thank you for posting in Windows Server Forum.
In a Remote Desktop scenario, a user is using a remote server for running services, and the smart card is local to the computer that the user is using. In a smart card logon scenario, the smart card service on the remote server redirects to the smart card reader
connected to the local computer where the user is trying to log on. You can refer following article for details.
Smart Card and Remote Desktop Services
http://technet.microsoft.com/en-us/library/ff404286(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Need info about nvidia graphics card supported with premiere pro cs5

Hi
I need information about nvidia graphics card supported with premiere pro cs5
If I have a computer(portable) with this video card or graphics card :
nVIDIA® GeForce™ GTX 285M with 1GB DDR3 Video Memory available in Single or Dual (SLi) Configurations
Microsoft® DirectX® 10 Compatible
is it going to support MPE in premiere pro cs5?
Regards,
Vinay

To be clear:
You asked about supported cards. Here is a list of supported cards. Others on this thread are telling you how to make an unsupported card function to some degree using a method that is not advocated by Adobe.

My ipod touch 3rd gen doesnt work on usb charger but on dock it says "Charging is not supported with this device" How do I fix it?

I'm taking it in to get it looked at but will they cover this? And is there a way to fix it before I take it in. I'm still under the 1 year warranty plan. My friend said that they might exchange it. It's a 64GB and I use it for a lot of things like my picture, music, contacts, and email. It's got scratches on the back but other wise its ok the screen isn't cracked or scratched.
I have a usb charger for it but when I plug it into the PC or my wall charger it won't charge. It just says "Charging is not supported with this device". It even says that sometimes when it's not charging. But it works on a dock station like my clock or radio.
Also my home buttom won't work unless I press down real hard. This scares me because I'm afraid I wil persss it too hard and break it even more.
Please help.

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

What does this message mean Charging is not supported with this device?

What does this message mean Charging is not supported with this device?

You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast.

!Charging is not supported with this device! When using original charger.

My iPhone4 suddenly won't take a charge. Because I carry it in my pocket, I suspected there was a lack of conductivity. I used air to clean the slot and a small plastic pick. Some dust bunnies came out of the slot and I plugged it in to charge. I got the message, "!Charging is not supported with this device!" This didn't make sense, because I was using the same original charger that I've been using for 2 years.
Any suggestions?

The dock connector may be damaged or the cable may be damaged, try a different cable.

HT1476 How do I fix charging not supported with this device?

Charging not supported with this device. How do I fix this. Charger that came with the phone is used.

Clean the contacts on the dock end of the cable and inside the dock on the phone

My iPad 5 will not charge, I get the message " CHARGING IS NOT SUPPORTED WITH THIS DEVICE

I get the message " CHARGING IS NOT SUPPORTED WITH THIS DEVICE. I've checked different cables and chargers ( from our other iPad 5, and cleaned the port, but it won't charge plugged into the computer or ghargers.

If charging will not work with valid cables and chargers and the Lightning port is clear, there is likely a hardware issue. Take the iPad to an Apple store genius bar and have it tested by the techs.

Can you turn off the "Charging not supported with this device" messages?

I recently bought a standard dock extender cable in order to connect my iPad to my Apple HiFi and have had music from Pandora constantly interrupted by sporadic "Charging not supported with this device" messages. The messages will continue to come up repeatedly despite pressing the "Dismiss" bar repeatedly.
Is there a way to turn those kinds of warnings off in either iPad Settings or in iTunes when docking the iPad?

Try connecting the iPad to the iPod Hi-Fi with a male to male mini-stereo cable. I use one of these cables to connect my Airport Express to my iPod Hi-Fi, so that I can use it with AirTunes.
You can even combine the cable with the Apple iPad Dock, which would let you charge the iPad while using it with the iPod Hi-Fi.

Smart card logon with third party CA combined with ADFS to Office 365

Greetings,
I've been trying figure out how to implement ADFS to Office 365 in MS cloud in our environment, with little luck. I have a working 2012 domain and we are already using smart card logon on Windows 7/8 workstations. Certificates on smart cards are issued by
3rd party CA. This far every thing is fine and working, necessary root certificates are added to trusted Trusted Root Certification Authorities, UPN suffixes and users' UPNs are set according to UPN on the certificates and users successfully log on to
workstations with smart cards.
Now I face the requirement to enable SSOto Office 365 with accounts from our AD. I've been told by our MS partner and Dr. Google that in order to do that user account name (upn) in AD and in O365 need to match. Now the fact that account UPN in our AD is
not usable in O365 (because it is set to match 3rd party certificate UPN) and I have not found a way to enable smart card log on without changing UPN in AD.
Does anyone has experience of such a configuration? Is it possible to use AD federation to O365 at all in our case?
Best regards, and thanks in advance
Timo

On Fri, 25 Apr 2014 09:27:05 +0000, Timo Kallioniemi wrote:
Now I face the requirement to enable SSOto Office 365 with accounts from our AD. I've been told by our MS partner and Dr. Google that in order to do that user account name (upn) in AD and in O365 need to match. Now the fact that account UPN in our AD
is not usable in O365 (because it is set to match 3rd party certificate UPN) and I have not found a way to enable smart card log on without changing UPN in AD.
Does anyone has experience of such a configuration? Is it possible to use AD federation to O365 at all in our case?
This is not a general Windows server security issue. You should post your
question in an O365 support forum.
http://community.office365.com/en-us/f/default.aspx
Paul Adare - FIM CM MVP
Technology is dominated by two types of people: Those who understand
what they do not manage. Those who manage what they do not understand.
-- Putt's Law

CAC or smart card use with Oracle database and web server

I've been asked to smart card (CAC) enable our Oracle web server and database access. We currently use CAC to access many of our other applications.
Where can I find the following information
Oracle software required (and is it an additional cost)
How to integrate Oracle App server (web server) with CAC.
How would I need to change the database users accounts to be CAC enabled rather than database users accounts.
Thanks
steven jackson
[email protected]
614-692-9768

Virtualisation is not certified for Oracle RAC on Windows.
+Certified Software on Oracle VM [ID 464754.1]+ note states:
Oracle Real Application Clusters (RAC)
    Oracle 10.2.0.4 and up (10gR2) and 11.1.0.7 and up (11gR1) and 11gR2 RAC for Linux x86 and Linux x86_64 certified on Oracle VM
        Guest OS: Oracle Linux 5.1 (and above) RHEL 5.1 (and above) for Linux x86 / Linux x86_64
        Paravirtualized (PV) mode only (Guest OS and drivers)
        Only supported on Oracle VM 2.1.2 and above
        Live-migration of an Oracle RAC VM is supported with Oracle VM 2.2.1 and above.
        Previous versions are not supported. Please refer to this link for best practices.
        Over-committing CPUs is not recommended, but supported with the following restrictions:
            The total amount of VCPUs allocated to guest domains (running Oracle RAC guests), should not exceed
            two times (2x) the amount of real CPUs / cores in the Oracle VM server.
            The amount of VCPUs allocated to a single guest domain should not exceed the amount of real CPUs /
            cores in the Oracle VM server.
            Maintain Oracle VMs default VCPU allocation for dom-0: Oracle VM will allocate 1 VCPU for each real CPU or core to dom-0.
            CPU pinning is only recommended for hard partitioning. If no hard partitioning is required, CPU pinning should not be used.
        Static support only (dynamic support is being planned):
            Dynamic resizing of guest virtual machine is not supported (VCPU, memory and I/O)
            Virtual Machine Pause/Restore of an active Real Application Cluster virtual machine is not supported.

Unable to pair BB Smart Card Reader with Pc/Laptop

Hi, I have 2 new BB smart card readers (SCR) and Im trying to pair with the PC and I can not. The SCR software can not detect the SCR. I put the ID of the device on the software and is trying to looking for it but can not. It says "Unable to connect to the specified Blackberry smart card reader". I have another SCR and I don't have problems to pair with the computer only with the new ones. The SCR have the last OS. Do you know what could be the problem? I think is a bug of the new SCR.

mzamora wrote:
Andy, may be nothing so where can I post it? Is there a general discussion?
Hello,
if I were you, I'd post in the "General Blackberry Smartphone Functions and Features" forum.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

SCCM 2012 SP1 Remote Control Smart Card Support?

Hi,
We're currently running SCCM 2012 SP1. We have implemented mandatory smart card login on our Win 7 workstations using GPO. Is it correct to say that SCCM's Remote Control Viewer does not support passing of smart card credentials through the session?
Our testing thus far would indicate that it does not. This is problematic for our help desk that often uses the Remote Viewer to connect to end user machines and then elevate rights to perform admin level tasks. So far the only way we have developed
to work around it is to run a script that temporarily changes the GPO to remove the smart card enforcement requirement. Is there a better way to address this issue?
Thanks
Josh

Just to add to Wally's comments, there's actually no way this will ever happen without significant investments and development time (if it's possible at all) and it's really not anything that the ConfigMgr product group could implement as it has to with
authentication which is handled by the OS. Passing smart card credentials across the network is inherently flawed and poses a huge security risk. When this was discussed internally at Microsoft, the security teams there said they could easily hack any mechanism
that tried to do this and compromise the credentials.
The recommendation from Microsoft is to use local admin accounts on workstations for elevation. This goes for *any* type of remote control (including remote desktop btw) because the same security weakness exists regardless of the remote tool being used.
Jason | http://blog.configmgrftw.com

Smart Cards slow with Sun Ray Windows Connector

I'm succesfully using smart cards to log on to Windows 2003. But the problem is that it's very slow!
If i enter a wrong pin code, its fairly quick to respond with an error but when entering the right one it takes like 13-15 seconds to log on. The smart card slot on Sun Ray 2 is flashing all that time, so it seems like it's reading the certificate takes that long?
Any ideas how to make it quicker?

I have done the same setup with SunRay 170.
Approx the same delay is experienced with my setup.
When I meet my Card Vendor next time around I will ask about
how many times the CERT is read.
The Sunray 2 is faster , alot faster than sunray 170 so the delay
must be the speed that card transactions can be performed.
//lars

Smart Card application with EJB?

Hallo
I have the following problem:
I have to write an application which should be accessible from the internet. The whole application has to be on the server. Every user who wants to get access to the application has to insert a smartcard into the Reader who is installed on his local system. The application has to read some information (username or password for example) from the card and to prove if the user is allowed to start the Application.
Does anybody has an idea how to realize this? Is it possible to realize this with EJB or do i have to use an other technology?
Thanks for your answers

Well i did not use the java smart card technology. I used the Java native interface to implement the classes who have to read from the card. I got an api dll from the producer of the smart card. So i used the Java native interface to realize the logic of the smartcard application. This part of my programm is written in c++. The problem is that the whole programm is on a server but for getting access to the smartcard reader the dll s (the api dll from the producer and my dll for the jni) have to been installed on every client......
You said that i have to write a swing client who picks the information from the smartcard and sends it afterwards to the enterprise system. Is there no other possibility to solve this problem without writing a swing client ?

PIV II Contactless Smart Card Support with Blackberry 10 Devices?

Similar Messages

Maybe you are looking for