Pivot table not displaying the values correctly

Hi,
I have created a pivot table in which i am using 2 tables. I pulled columns from table A and one column from table B in the measures section to get the grand total. All the rows are comming fine but, its not returning any values for tableB's column(if i pull it into measures).
If the column stays under rows section, the report is comming out fine.
I need the total to be displayed in the report.
Can some body help me with this.
Thanks

Hi David,
i have set the column's aggregation to sum, and it is comming out correctly in the grand total, how ever, i have some of the coulmns which i am taking the %
col3= (col2/col1)*100
col1- aggregation set as Sum, col2 and col3 is set as default
The values for col3 are comming finr in report , where as it is not returning correct value for garnd total row.
ex: row w--- col1 col2 col3
row1-----6630 1130 17.04
row2 6114 994 16.26
total 23317 3739 56.40(should be 16.2..)
For col3 it is calculating like this(3739-total of col2/ 6630 -first row of col1 *100)
Instead of taking total , it is taking the first row.
I tried different aggregations, but was still unable to get the correct value. Can you please let me know if i am missing anything.
Can we define custom aggregations.
Thanks
Gayatri
Edited by: user12589255 on Aug 3, 2011 2:55 PM

Similar Messages

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

    I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
    I have tried Acrobat 9, 10 and 11.
    Any advice (apart from use Windows 7! ) would be most welcome.
    Many thanks.

    If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
    Is this a local or online PDF?
    If local, is the file really exactly the same?
    If online, in what browser?

  • Error in Acrobat 8: An error exists on this page. Acrobat may not display the page correctly...?

    Hi,
    We perform the e-signing on any PDF using our custom e-signature plug-in. Once that's done, when we try re-opening the PDF in Acrobat version 8.0.0.0, we get the following error:-
    "An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem"
    Please note that this error occurs intermittently and is NOT observed in Acrobat 7 or 9.  Also, when a plain PDF is opened (i.e. a PDF without any signature on it) then there is NO error.
    Could you let me know what could be the issue here? I read it in Acrobat 8.1.3 release notes that such an error was a known bug in version 8.0.0.0 (http://kb2.adobe.com/cps/407/kb407016.html), but I am not sure of its cause.
    Let me know your comments/suggestions.
    Thanks!

    I am getting the same error even in Acrobat version 8.1.3.
    Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking  ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
    Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
    Code 4002: PDF content contains erros.
    However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
    Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
    Awaiting reply!
    Regards.

  • How do i type in tamil in microsoft office for mac? my previous tamil documents from my pc are not displaying the font correctly, nor am i able to use the inbuilt mac tamil font to write in microsoft office

    How do i type in tamil in microsoft office for mac? my previous tamil documents from my pc are not displaying the font correctly, nor am i able to use the inbuilt mac tamil font to write in microsoft office

    You should probalby post your question on Microsoft's own forums for their Mac software since it's their stuff you're asking about:
    http://answers.microsoft.com/en-us/mac

  • An error exists on this page. acrobat may not display the page correctly.

    While opening a pdf document it shows an error as "An error exists on this page. acrobat may not display the page correctly. Please contact the person who has created this pdf to correct the problem". The pdf was made in 1.4 Adobe 5.x version. Any suggestions.

    I suggest you contact the person who has created the PDF in order to fix the problem.

  • Reader 11.0.0.1 An error exist on this page. Acrobat may not display the page correctly. Please cont

    "An error exist on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."
    Any ideas how to get rid of this? Realistically its not practical to contact them, nor the other 1,000,000 web site owners whom host pdf's.
    I really would like to disable the pop up only.
    Seem to get it on quite a few PDF's. This web page seems to have quite a few that produce the problem.
    http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
    click on the link to the pdf, scroll down a few pages and it pops up.
    I do not get the error when using reader 10, only the new 11.0.0.1 version.

    Hi Pat,
    No problem withthe link you supplied.
    This is one that has the problem "948 Cayenne Owners Manual - 2008 - Turbo" http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
    Just FYI, I look after 8000 clients, have the same problem on 3 of my test machines.
    All windows 7, 64 bit  IE9 fully patched.
    Using 32 bit IE
    Testing prior to upgrade from 10 to 11

  • Is there any possible that pivot table can display date values in the data area like this?

    I use Power Query to load data(including all the of data showed in the following table without accumulating) from database to the Excel Worksheet, and I want to build a pivot table like this.
    But the data area of the pivot table can only accecpt and display numeric data. Is there any possible that such a display can be achieved?
    Thanks.

    Hi,
    Would you like to upload a sample file through OneDrive? I'd like to see the data source structure and test it.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Setting DAQ channel by property node does not display the value

    I am writing a configuration VI to set channel selection and calibration parameters for an SCXI chassis. I store a default setup in a configuration (ini) file and read that file automatically when the VI is called. The value from the file are set by property nodes using the "Value" property. The values from the file do not display in the DAQ channel selection rings, but the numerical calibration values do display correctly. When I click the down arrow in the channel rings, the correct value displays.
    This behavior exists both in LabView and app-builder EXEs. Also, if I change the property nodes for the DAQ channels to local variables, it works. The Value (signaling) property doesn't cause them to display
    properly either. Why can't I use the property node?

    I don't understand exactly what you are trying to do.
    Please upload a simple VI to demonstrate the behavior you are describing. Remember also to attach the .ini file.
    Best regards,
    Philip C.
    Applications Engineer
    National Instruments
    www.ni.com/ask
    - Philip Courtois, Thinkbot Solutions

  • Folders Panel is not displaying the Devices correctly

    Hi
    I need some help for one of my students.
    She has a Mac Book and an external hard drive.
    She can see the external hard drive as a device in the Finder Window
    But when she goes into Lightroom, it displays the external hard drive as a "Volumes" folder listed under the Mac Internal hard drive.
    I am trying to find out why it does not want to list it as its own hard drive

    If you click the Import button in the LR Library (bottom left) does the ehd display correctly? There needs to be a least one folder with pictures imported into LR, for it to be recognized.
    Otherwise the problem may relate to the Mac HD root folder if pictures were originally imported from that location using:
    Import >> Add
    The problem doesn’t usually arise if bringing in photos from a camera or storage card to be copied to a folder on the ehd using:
    Import >> Copy
    You may find this link helpful:
      http://helpx.adobe.com/lightroom/kb/volumes-drives-display-folders-lightoom.html

  • Layout not retrieving the values correctly

    Hi,
    As per the requirement I need to get the AOP values from the cube for a particular fiscal year to be populated into one of the columns of the Layout,but the planning layout which I had designed retrives the AOP values only for the first period.I should be getting the total AOP for the Fiscal year in my layout.
    Say I have the cube values as
    Product   Fiscal year/Period   Value
    P-01         2006001                  100
    P-01         2006008                   500
    P-02         2006001                   200
    P-03         2006005                    300 
    My layout retrieves the values as follows
    P-01         2006001                  100
    P-02         2006001                   200
    but I need the Layout values as
    P-01                     600
    P-02                     200
    P-03                     300.
    Could anyone tell me what modifications I need to do in my layout inorder to achieve the above functionality.
    Points will be assigned.
    Thanks,
    Subha

    Hi Mayank,
    I have not restricted to 2006001,but in the layout I have posting period as an variable which contains 1 to 13 periods as the variable definition.I need this becoz I need to generate period1 to period 13 columns dynamically in the same layout.
    As you said If I remove the Posting period then how will I be able to genearte the columns dynamically.
    Thanks,
    Subha
    Edited by: subhashini reddy on Apr 10, 2008 9:33 PM

  • Error: An error exists on this page. Acrobat may not display the page correctly.

    Hi --
    The PDF I created is throwing an error message for some people in my organization and not others. I took a final PDF from our printer (not sure what they used to create it), optimized it, and added metadata and bookmarks -- all in Acrobat Pro X on a Mac. At one point I replaced a page of a lower resolution version with a page from a higher resolution version in order to maintain resolution for a particular image, but I later optimized the whole file and wiped out the higher resolution image. I also changed the numbering using the thumbnail view so that the frontmatter of the book uses lowercase roman numerals and printed page numbers match document page numbers. I removed the page number from the front and back covers. There are a bunch of images in the file.
    The file is on our website behind a registration/log in page (free registration - Lincoln Institute of Land Policy Web Site) and this is a new initiative for us -- giving away full books as PDFs for free -- so I would like to know that the file is not throwing errors. However, there doesn't seem to be a common browser/Acrobat Reader config among the people here getting the error.
    I can provide the file if needed.
    Thanks in advance,
    Susan

    Acrobat 8 Pro. I combined several other PDFs that I downloaded, into one new document. It saved without errors, then after I printed it, this message popped up.
    I poked around in the menus, looking for some type of "audit" function, like my CAD software has and found "Examine Document". I clicked on that and then removed all the 'metadata', 'hidden text on pages' and 'deleted hidden page and image content'. If the error message doesn't pop up again, I'll assume that fixed the problem.

  • Adobe form not printing the values correctly...

    Hi All,
    I am developing a static hrform using adobe desingner. Below is my requirement :
    EARNING..... | TAX......
    ABSENCES..... | OTHER DED....
    I have EARNING,ABSENCE section on left side and i moved this into a SUBFORM with content "FLOWED" direction "TOP TO BOTTOM".
    On the right side, i have TAXES, OTHER DED and i moved this into a SUBFORM with content "FLOWED" direction "TOP TO BOTTOM".
    These both sobform i have saved in my master subform with content "FLOWED" direction "Western Text".
    This all worked fine till i have less contents in my EARNING section. If it have more line items (not fitting on one page) than it shows TAXES, OTHER DED on 2nd page right side.
    My requirement is to print everything (left & right side) initially on first page and once this gets filled print the remianing on next pages.
    Thanks in advance.
    Regards
    Ajay

    Hi,
    It is really surprising i haven't received any comment from anyone till now.
    Regards
    Ajay

  • An Error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem.

    Anyone have a quick fix for this?
    The user that created a document updated adobe reader prior to getting this error message.

    The PDF file structure is complex with lots of compression, offset tables, xref tables,  mapping information, images, etc  and if Acrobat/Reader cannot fix the minor problem then you need to download a new copy of the file from the source.
    If this file is being sent by email make sure you email program can handle the PDF attachment or have the PDF sent to you in a zip file.

  • "An error exists on this page. Acrobat may not display the page correctly. Please contact the person

    i have made a form in Adobe acrobat.... the fills appear exactly fine but when i want to print the file the error dialog box appears and when i continue the text characters in the fields are printed all on each other. i tried the same on different computers and same issue . what should i do?

    hi Ajlan,
    i am using acrobat XI pro...
    actually i found out that everything is ok on other computers specially windows (i use mac) i just need to fix the problem on my computer as well.
    i created three different forms all from scratch and the same thing happened in all of them.

Maybe you are looking for