PivotCharts and Templates

I am using Office 365 on a Windows 8 installation on parallels on a mac
In previous versions of Excel (2007 and 2010) I could create a PivotChart, make modifications to it and save it as a template. I could apply this template to both regular charts as well as PivotCharts.
In Excel 2013 - it appears that I can create the templates and save them, but it doesn't allow me to apply a template to a PivotChart, only to a regular chart.
When I try to change the chart type of a PivotChart and navigate to the Templates folder, each template states the following:
"This template can't be applied. It's either damaged or won't work for the selected chart. Please try recreating it."
I have tried that several times with several types of PivotCharts all with the same results.
Is there some setting I am missing or was this functionality removed from Office 365/Excel 2013?

Hi,
To my knowledge, the functionality you mentioned hasn’t been removed from excel 2013/office 365. I tested in my environment, it works just fine.
So there might be other factors causing this problem. My suggestion is to clean up the Charts folder
C:\Users\Username\AppData\Roaming\Microsoft\Templates\Charts
Remember to backup Chart Template Files (*.crtx) before we delete it, then we recreate a pivot chart template to see whether it can be applied to both regular chart and pivot chart.
Also you can make a clean boot for your computer before you run excel 2013. This issue may cause by 3rd party software. For the detailed steps, please refer to the below link:
http://support.microsoft.com/kb/331796/en-us
Or you can use another user account to log into the computer to test this issue.
If the suggestion above doesn’t bring any help, try to repair your office from Control Panel.
Hope that helps.

Similar Messages

Old Purchase orders and template - Price Information not taken into account

Hi experts,
In MDM catalog, I have a product with 'Price Information' and with 'Contract price'. I create a shopping cart with the 'Price Information'.
Then, I create another shopping cart using the anterior througth the functionality 'Old Purchase orders and template'.
The price taken into account is the 'Contract Price'
Is this the standard procedure?
Thanks in advance,
R Silva

as far as i know the price preference is in this order
1. Contract price
2. Purchase Info record
3. list price
so in that case - this is standard procedure
you can confirm - by doing the same process for an item that has ONLY price information (list price) and see if that price is copied from old to new SC
thanks
-Adrivit

Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work

User Configuration/Policies/Administrative Templates
- Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work
Microsoft Word 2013/Word Options/Security/Trust Center/Trusted Locations
- Allow Trusted Locations on the network:
Enabled
- Trusted Location #1:
Enabled
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
Date: June 10, 2013
Description: Trusted Location
Allow sub folders: Enabled
The policy appears to apply to the client correctly by adding the following registry key and values:
HKEY_CURRENT_USER\Software\Policies\Microsoft\office\15.0\word\security\trusted locations\location1
allowsubfolders: 1
date: June 10, 2013
Description: Trusted Location
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
However, when you open Word Options/Trust Centre/Trust Centre Settings…/Trusted Locations
There are no trusted locations listed under ‘Policy Locations’
I have tried setting similar settings for setting the Shared Templates folder location and just like the trusted locations policy, the registry keys are created properly in HKEY_CURRENT_USER\Software\Policies however word doesn’t
seem to recognize these either.
This used to work flawlessly using the administrative templates for Word 2007 and 2010. Has anyone been able to get these policies to apply successfully, or know why office doesn’t recognize these settings from the Policies registry
Key?

This would have been an easy solution to the issue. Unfortunately it isn't the problem. This question was originally posted on another Microsoft site and
was transferred here and when it was transferred the path's changed from the original post:
\\server\sharedfodlername to //server/sharedfoldername. (I will edit the question to show up as it did in the original post) Not sure how that happened. This
is still an issue that I haven't been able to get working correctly.
As it turns out the 'New from Template' interface Word 2013 has developed is very bulky with large thumbnails and is not very customizable nor practical for an office
that has a large number of templates. Because I am unsatisfied with the display and performance of the 'New' template chooser I sought after a solution to change the way word creates a document from a template in another thread:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/how-can-you-change-the-display-of-templates-in/d49194b9-a6b4-4768-8502-7d7b50e9dd65 working through this issue with Jay we were able to develop
some VB script with handles a very large number of templates in a list view and it works much faster than the built-in Word interface. The above thread is how I've worked around trying to define a shared template location and I am quite happy with it.

Define Logical Systems and Template Names for BW Reports

Hi experts
I would like to know if someone used the mentioned functionality 'Define Logical Systems and Template Names for BW Reports, I would like to know too IF I create a Z REPORT for example in webdynpro and insert it in this configuration it will work and where it will appear in sourcing cockpit?
sds.
Javier

Hello Muthu,
BW reports will be shown in SRM Box if the corresponding BW roles for SRM are integrated with SRM roles.
You might to activate the corresponding datasource of this in SRM.
And since you have to connect the source system to BW, I think you have to define SRM system as logical system in BW.
Regards,
Pavan

Old Purchase Order and Templates

Hi Experts,
We have implemented SRM 5 and ECC 6 with classic scenario.
When we create a shopping cart, there is an option to select the old PO and templates which gives option to search for our own shopping carts and templates if any.
We have an business requirement to allow users to see all the shopping carts created within a business unit or department. This will enable them to use other shopping carts as reference.
Please let me know how this can be achevied.
Thanks
Vijay

Hi Vijay,
If you want that every user should be able to see all shopping carts created by all other users, you need
to configure "Monitor Shopping Cart" button on your EBP (SRM) Enterprise Portal.
Please consult your Portal consultant to understand how this functionality can be configured.
Also you might need to assign the role SAP_EC_BBP_ADMINISTRATOR
(Authorization Object - B_BUPA_FDG) to your users, so that they can access all shopping carts of
other users.
Please refer this link to know more:
http://www.purdue.edu/purchasing/doc/Monitor%20Shopping%20Carts.doc
Hope this will help.
Thanks,
Ruchika

Interfering in "Old Purchase order and Templates"

Hi Experts,
We use Extended-Classic scenario.
We use ECC contracts and transfer the contracts details to the SRM-MDM catalog.
When the user creates SC the contract details come from the SRM-MDM
catalog as the source of supply correctly.
But when the user copy the SC, using "Old Purchase order and Templates", the source of supply (contract details) does not being copied from the old SC. (this happends because we use Extended scenario and we use backend contracts).
Is there any way we can interfere in "Old Purchase order and Templates" and force the contract details to be copied from the old SC?
Thanks in Advance,
Keren

Hi,
Thanks for your answer.
Yes, the old SC was created from catalog but we need the Source of supply (contract number) to be copied to the new SC.
Thanks,
Keren

Multiple tables and templates in a main window

Hi,
Is it possible to have multiple tables and templates in a main window of a smartform?
If so then how they are positioned in the main window? Means which table to come first and which to be the next?
Thanks in advance.........
Prinan

Hi!
both tables and templates can be printed any number of times ina main window.
The tables as in sequence are printed...after ending with the first it gets on to the another.
If u want to print it under some cdonditions you can do it using the condition tabs.As per it is a main window the dats gets flowing to the next page so as the order goes thae data goes on printed.
Regards.

Theme and Template not importing correctly

I have exported the theme and template file. At the import site the template and theme did not install correctly.
I can see that it is using the same theme as the source environment, but it will not appear.
Any ideas?

You've got two issues going on.
One- never put anything besides the .dwt template files in
the Templates
folder.
Also- the paths need to work IN the template.
The images aren't showing here:
http://www.und.edu/dept/art/Templates/MAIN.dwt
So dw is making wrong paths to them in the child pages.
Use the "browse to file" dialog box to pick the images.
And if any of them are in the Templates folder, use the Dw
files panel to
move them.
Second issue:
Your dw "site" is defined to a subfolder of the domain,
/dept/art/ as far as
i can guess. But you've used site root relative paths in the
Template. Site
root relative paths start with a leading /slash. It tells the
browser to
start from the domain name's root level.
Only use Document Relative paths if the site is defined to a
subfolder of a
domain. (look for the pulldown in the bottom of the browse to
file dialog
box)
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Mobile themes and templates

It seems apex 4.1 supports developement of mobile apps and hence includes themes and HTML templates suitable for smart phones and mobile devices.
I have not found any themes specific to mobile apps. I could be wrong. Can anyone please help me locating themes and templates.
Thanks in advance
cmovva

Chandra,
Peter Reganitsch has blogged on this topic; it' a great introduction and provides a steps on how to build a demo mobile theme and app.
[url http://www.oracle-and-apex.com/create-a-mobile-theme-for-oracle-apex/]Create a mobile Theme for Oracle APEX
Jeff

Activity Journal - Creation of template type and template

Hello Experts,
we need to create a template type and template because we can not use the standard template to see product information in the Activity Journal.
Where in Customizing can i define template type and template and which are the steps to do it. For our activity journal we need to see only the fields:
1. Product ID
2. Product
3. Notes
The rest of the information is not necesary. The SAP Note 1261860 describes exactly the problem we have but we are not able to generate template and template type.
Best Regards
Oliver Schultze

Hi there
For generation of template for Activity so that you can see the Product info,u just need to generate the Index in SPRO
Go to IMG and there within the transaction types you can locate the index i am speaking about to generate.
Here is the path-->IMG->CRM--->Transaction ->Basic Settings->Settings for Activites->Activity Journal--->Activity Standard Template Type
Here you give your desired language in which you want your template to be created.
As soon as you genarte that you will be having product info on your Activity screen
See this arrangement is client specific only so if you are say in sandbox or dev or qual or prod.u need to do this setting seperately in each client.
Hope you got what i said.
Cheers
Ashish

Checking of min. quantity, works erroneously in last purchase and templates

Hi,
We are running SRM4 and SAP CCMv2.
We do a minimun quantity check in the catalog via BADI. It works fine, but when we do a shopping cart using the old purchases & templates option, an user error appears about the quantity.
It isn't correct because the quantity is correct in the former shopping cart but when we chose the position, the catalog is open, the quantity is set to 1 anf for that reason my check show an error, about the quantity is bellow that the minimum quantity.
Is possible to distinguish when I am working in the catalog and when I am working with the last purchase orders and template.
Thanks
Jorge

One little bump then to death it goes.
I just no longer know what to google, and the vim help pages aren't helping.

Creat SC from Old Purchase Orders and Templates - Price not copied

Hi Experts,
When Creating SC usinfg Old Purchase Orders and Templates interface ,
All details are copied from Old SC to the New one , except the unit price of the item (It is created with price O )
Please advise where we can set to copy the price also.
Best Regards,
Moshe

15.02.2010 - 14:10:05 CET - Reply by SAP
Dear Moshe,
Thank you for contacting SAP Active Global Support.
I have logged on to the system and have checked the behaviour with the
SC: 1000007814. The item in this SC is an catalog item, that means it
has an catalog price too, which is 0 in this case.
If you are using the copy function, the system validate the item, and
set the original values (in this case the price) back to the standard.
This is the standard behaviour of the system.
Please use the catalog with price, as designed scenario.
Kind Regards,
Laszlo Tordai
Support Consultant
Active Global Support - Logistics

Add restriction while create item by "Old Purchase Orders and Templates"

We are consider to add restriction while create shopping cart item by "Old Purchase Orders and Templates". After implement such restriction, create item by copying old shopping cart item is not allow for particular matereial group number.
Is there any BADI can be used in our case? If there is no, could modify HTML template the only solution?
Regards,
Donald

Hi,
If the restriction is for certain group of people,then you have 2 options:
1.Make the link invisible for those group of people by implementing the BADI BBP_SC_MODIFY_UI.In the BADI,first check the user attributes like particular role and based on that make the link invisible.
2. Assign certain role to the group of users who should not see the link "Old Purchase order and templates".You can hide this link in the MENU by removing this from the lits of trasctions in that particular role.In PFCG,go in that role and then under MENU tab,remove the entry for "OLD PURCHASE ORDER AND TEMPLATES".
BR,
Disha.
Do reward points for useful answers.

Difference between dynamic report and template

I think the subject line covers it, I am trying to find out, that when I save the report, I can save it as static or dynamic report or as a template. but what is the diff between dynamic report and template?
Thanks.

Hi Zack,
SAP provides some standard templates as report templates. The users are provided with the option to save their own versions of reports as 'Report Templates' for future use. As a super user one could create a custom template and save to the template library which the other users could access from the template library.
For example if you have 'ACCOUNT' drilldown as a standard report template, you could define a new template as for example, 'Entity' drilldown template.
Hope it is clear now.
Thanks,
Sreeni

Best Practice Question - Data Def and Template setup

EBS provides reports and templates. As expected the template did not fit our needs and the data objects did not include all the elements required. I've built custom objects for both (thanks to help from the forum).
Should the templates and data definitions be setup under their corresponding application or under the custom application (ie PO vs XX )?
In my case if I setup the data definition and template under the XX application then all the EBS OAF web pages dont show my new reports. I'd have to also build OAF extensions to show custom reports (seems stupid).
Is there any negative impacts of registering custom data definition and templates under their corresponding applications (like Purchasing, Inventory)? Or is there a better way that I'm missing?

not really. I would make it work by anymeans neccessary. The problem you are experience I've had issues with too.
The concurrent program and has to be the same as template application, same for for the data definition.
Ike Wiggins
http://bipublisher.blogspot.com

PivotCharts and Templates

Similar Messages

Maybe you are looking for