PIX 501 Not working, why??

Hi,
    I have just purchased a nex Cisco pix 501 firewall and i have installed these  certificates it asks for. Now the situation is that the certificates have been installed but this stupid thing won't even goto the PDM window.it just tell me that a new window will open but nothing happens and i am just tired of this thing. I have even installed java latest version but same issue then i read on the forums to use java 1.5x version, tried that too and it won't go to the. Now can anyone tell me how can i make this thing to work and move on to the PDM window. i also used tried it on mozilla, IE, chrome but same issue.
Please help me out here ppl. Its getting really annoying
Regards,
Ali

Hi Julio,
Thank you so much for taking the time to assist me with this issue.  I'm not sure it's an ISP issue though (at least I hope not!)  Please consider:
- When I first attempted to implement this change, I didn't even think to install a router between the cable modem, and switch.  I figured I would simply install a switch (or hub) between the cable modem and firewall, and that I would be able to plug my IDS into that switch (or hub),  But it wouldn't work.  The PIX couldn't pull an IP.  I found out the problem was that the ISP was seeing the switch as the primary device, and grabbing it's MAC address.  The PIX was ignored, and therefore never able to connect.  I called the ISP and they confirmed this is how they control how many devices are connected,  And since I only want to pay for 1 IP address from them, that's how it is.
- Then I decided to try the router approach.  And it seems to work.  The 1st router interface is getting the IP address from the ISP.  I have communications between the pix and router, and also between the router and internal hosts.  I don't think the ISP cares what's on the other side of the router (do they?)
- Each time I go home to try your recommendations I unplug the PIX from the cable modem, and connect the router inline.  That's when I lose internet connectivity.  But once I revert back to that configuration, it works again.  So the internet connection works fine.  It's only when I add the router to the mix that I lose it.
Please let me know if you think there's anything else I can try here.  I can't help thinking it is my configuration and not an ISP issue - hoping you are able to find something else I may have done incorrectly.
Thank you!
-Bk

Similar Messages

  • My ipad camera is not working why? Help

    My ipad camera is not working, why? Please help!!

    HI Judejesalva,
      You can restore your ipad to your factory settings it could be that the camera is having an error with the camera software.

  • Hello, I just did an update and now the second Language - Hebrew - does not working. why?

    Hello, I just did an update and now the second Language - Hebrew - does not working. why?

    More information please.
    If you are on adobe cloud, download indesign that support hebrew from CC desktop. Click on the preference gear on the top right then select App language.

  • HT2731 i already make my apple id but it not working why?

    sir i make id but not working why?

    What happens when you try to use it ? When you create an account you should get a email which you will need to open and click on the 'verify now' link in it.
    If it's a different problem ... ?

  • I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
    Från: Mylenium 
    Skickat: den 29 december 2014 16:48
    Till: Tony Bohman
    Ämne:  I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    created by Mylenium <https://forums.adobe.com/people/Mylenium>  in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

  • My network is not working i am in ghana and i use MTN  network but it is not working why is it like that

    my network is not working i am in ghana and i use MTN  network but it is not working why is it like that... pls get back to me now

    It sounds as if you need to call your mobile carrier.

  • I just bought a brand new iphone 5c and the home button is not working , why is that ?

    I just had a brand new iPhone 5c and the home button is not working , why is that ?

    then contact apple for warranty support or return the phone

  • I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

    I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

    These prices are for the U.S.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model          Out-of-Warranty Service
    iPhone 5          $229
    iPhone 4S          $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone          $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

  • The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    Hi there,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Additionally, you may want to try completely disabling and re-enabling restrictions.
    -Griff W.

  • My new iPhone 4S speaker not working why?

    my iPhone 4S iOS 7.0.3,model MF266HN/A,8GB one speaker not working why? What can I do?

    All iPhones are mono. Stereo is only available on Earphones.
    Bottom left is mic and right is the speaker.

  • I have downloaded skype, but after synchronizing with itunes skype not working, why?

    i have downloaded skype, but after synchronizing with itunes skype not working, why?  when I was synchronizing I believe there was some message in itune saying software not backed up or somethin to that effect.

    Thanks for your response.
    However, I did not find any solution to my problem.
    in my phone the skype application skype is not opening up, same is the caseiwth mobile voip. Both these applications were downloaded last night and it worked then, but not working now.
    Thanks in advance for anyone willing to help. I am new to the iphone.

  • RAVPN on PIX is not working

    Hi,
    I have PIX with OS ver 7.2 and I am trying to setup RAVPN, however it keeps failing and I get the following error on the PIX when enabling the crypto debug commands:
    Apr 05 01:47:15 [IKEv1]: Group = ccie, IP = 192.1.24.114, Error: Unable to remov
    e PeerTblEntry
    Apr 05 01:47:20 [IKEv1]: Group = ccie, IP = 192.1.24.114, Removing peer from pee
    r table failed, no match!
    And the following error is from my VPN client ver 4.8.01:
    The remote peer is no longer responding
    01:53:32.493 04/05/08 Sev=Warning/2 IKE/0xE300009B
    Fragmented msg rcvd with no associated SA (PacketReceiver:133)
    Please find attached my full PIX config.
    Any idea why the RAVPN is failing to establish?!!
    R/ Haitham

    Generally this is an account code or billing code issue. Often it is a credit limit issue.
    The folks at the X1 help line should be able to fix this 877-896-8678.
    jongul wrote:
    The premium networks and basic networks are not working with On Demand since I've moved. I have called support twice with this issue but they say "we are passing the problem up the next level of support and I should get a call about it". This issue has been happening for a week and I am not able to access services I am paying for. What can I do? (I have already had the box reset several times)

  • 1.4 - Important sites will not work & why are the AIM / Facebook contacts integrated with my phone contacts?

    Two issues I am having with my phone.
    1 - Before upgrading to the 1.4 software patch, I was able to visit some sites that I use regularly, one being www.hotschedules.com. I bartend and use my phone to look at my weekly schedule but now it will not work. Just to test it, I used a buddies phone who had not upgraded to 1.4 and the site opened JUST FINE!
    2 - I want to use facebook and AIM on my phone but for some (stupid?) reason, ALL of my facebook and aim contacts get listed in the SAME LIST as my phone contacts. I do NOT want to scroll through hundreds of contacts to find someone. Yes I know there are shortcuts but why even do this in the first place?

    Hello eculley and welcome to the forums;
    I attempted the website you mentioned, and it loaded fine on 1.4.1.1 on my Sprint Pre. We did identify some issues with websites on 1.4, and this should be resolved with 1.4.1. I know 1.4.1 is not available for Verizon yet, however it should be available soon.
    As for Facebook contacts, they show in the Synergy contact list by design, so that you can see all of your contacts in one master list. If you do not want those contacts showing in your Contacts app, you can open Preferences & Accounts for contacts and remove any account you don't want to see contacts for.
    Hope this helps!
    TreoAide

  • SMS relay via Iphone 6 NOT working - why?

    Hey all.
    So I upgraded to Yosemite. Looks nice.
    The "receive calls on your Mac" feature works fine on both my MacBook Air and my iMac. Not sure how much I'll use it though.
    However, the function where you can send non iMessage texts via iMessage (i.e. regular SMS) is NOT working for some odd reason.
    I get the usual "red" on the name I'm trying to send a message to and an error pop-up that this person is not hooked up to iMessage.
    Shouldn't this just work? Or is there something I need to do tick off first?
    I can place calls on my iPhone 6 via my Macs just fine - it's just the SMS function that's not active for some reason.
    Hope someone can help - because this is a function I've really looked forward to and know I'll be using a LOT.
    Best,
    Jesper

    I saw somewhere else in the forums that this  feature would work as of iOS 8.1 due out Monday....  but honestly don't know if there's any basis to that...  it's just a couple of days... why don't you wait and install iOS 8.1 on your phone and then try again...

  • My app store is not working why?, my app store is not working why?

    hy
               i want to now why i my itunes and app store is not working?and how can i send data from laptop to my iphone4?
               one more thing is that why safari cannot download any thing from web?

    Not sure what you mean by "not working" so without further information it's difficult to make a suggestion. As a shot in the dark.....
    Sign out of your ID in Settings>iTunes & App Store, restart the iPad and sign in again.
    Or ....You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

Maybe you are looking for

  • Display string from a log file on a Dashboard?

    Hello everyone, I need a little guidance on how to solve this problem in SCOM 2012 R2. I need SCOM to do this: Read a log file on a specific application server (say its hostname is server21) Look for the text: Total number of users: 15 Display the te

  • Problems sending photos from iPhone to iPhoto

    My iPhone stopped sending photos to my iPhoto (Photo Stream).  I thought it might be because I reached the maximum 1000 photos on the stream.  So, I deleted the 1000 photos.  But, then the rest of the photos still would't download.  How can I manuall

  • Goods receipt for purchase assignments has not been posted

    Hi all; In Vl02n in goods issue steps i have a message "Goods receipt for purchase assignments has not been posted" -the purchas order is assined to items delivery correctelly! -in our case, we haven't a stock. -after goods issue in vl02n we have tow

  • 10.6.3 - Problems and Attempts at Resolution - Please Help

    It was recommended to me by a regular contributor (RC-R) to put together in one place all the problems I've had and all the solutions I've tried. So here goes. Problems: (1) Major issue is that my 20" Alu iMac is randomly sent into a sleep mode from

  • Image comparison

    how two compare two images,which are stored in database