PIX 506e - cannot browse startup.html
I just got a PIX 506e from a friend that was not longer using it. I'm trying to get started with the configuration page. I've reset it to factory defaults, rebooted and connected up ethernet. I can ping the device at 192.168.1.1 and access it via console. I browse the site https://192.168.1.1/startup.html, get the invalid ssl certification, get a login prompt (user/pass) and as the document says I leave it blank. As soon as I hit ok it goes to the 404 error Page Not found.
Thanks in advance!
second part, anyone have a good article/document on standard configurations via cli? I worked my way through
http://www.dslreports.com/faq/15785 but didn't have any luck. Thats why I want to start with the web config then work into CLI.
I meant to reply sorry.
I found out that its 6.3 but that the previous owner removed PDM. I found the download on cisco HOWEVER I don't have an account so I have no way of actually downloading the PDM or 6.3 with pdm bin file.
do you know where I can get that?
thanks
Similar Messages
-
Cannot find the HTML browser installed on your system
Guys forgive me if you have answered this before, I have
tried a search of previous issues TNA.
I have reloaded R/H 6 to my laptop (with full admin rights
set against my user name) everything except works except generating
in Microsoft HTML Help I get the following error when I click
Finish: cannot find the HTML browser installed on your system
Any ideas welcome. With thanks, JHi JayRichard
You might try the following.
Inside RoboHelp HTML, click Tools > Options...
Click the Tool Locations tab
At the bottom of the dialog should be an area listing
"Browser paths". You should see one for Internet Explorer and one
for Netscape. Try clicking the little file folder icon to the right
of one of them. (Whichever browser you are using)
Navigate to and select the executable file for the browser.
Mine for Internet Explorer says:
D:\Program Files\...\iexplore.exe (The full path is
D:\Program Files\Internet Explorer\iexplore.exe
Dismiss the dialogs by clicking the Open and OK buttons until
they are all gone.
Keep us posted on whether this helps... Rick -
Error Message= x Cannot find the HTML help browser installed on your system.
Help! I cannot seem to find the solution for the error message I get when trying to generate a layout in Microsoft HTMl Help (Primary Layout). I am using the trial version, but it didn't seem to be an issue for anyone else in my class that was also using the trial version.
The error message states, "Cannot find the HTML help browser installed on your system."
Thank you!Sounds like a problem with the installation of RoboHelp on those machines. When you install RoboHelp, it installs the necessary files to view a CHM.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Linksys WRT600N vs CISCO PIX 506E.... Firewall / Routing Performance
Hi:
I am new to the forum and was hoping to tap into some of your expertise. I have a Linksys WRT600N version 1.1 and I recently acquired a CISCO PIX 506E firewall. My question is what should I use as a firewall? Both have SPI etc. Should I:
a) Use the 506E as a firewall and use the 600 as a wireless access point, or
b) Use the 600 as a firewall and wireless access point.
Do both routers have the same firewall routing performance? I want to use the storage feautre on the 600N, but if I do that and use it as a wireless access point the 600 can't get the proper time from the Internet, so my time for newly created folders and files shows they are 10 years old.
Anyway, just thought I would post and find out what some of the experts thought and maybe someone from Linksys or CISCO. I know the 506E is discontinued and was manufactured around 2001 and the 600N is a new model.
(Edited subject to keep threads from stretching. Thanks!)
Message Edited by JOHNDOE_06 on 05-06-2008 10:41 AMThe PIX is a real firewall. The WRT has a firewall which mostly protects the router itself. People prefer to buy a "SPI firewall router" instead of a simple "router" even though the router firewall does nothing or little to protect the LAN. The only firewall configurations on the WRTs you can usually do is on the Access Restrictions tab. But that's usually all. The LAN itself is not protected by the firewall. You would notice this if you had a public IP subnet and ran it through the WRT: the LAN would be fully exposed to the internet. Some routers have a few functions like protection against denial of service attacks or similar. But even then this often filters only the traffic targeted at the router and not the LAN.
The common protection of your LAN you have on the WRT is because you use private IP addresses inside your LAN and the router does NAT. However, NAT is not a security mechanism but a mechanism to solve the problem that you can only have a single public IP address but want to use multiple computers, which is why you have to use private IP addresses. Current NAT implementations usually drop unsolicited incoming traffic because they don't know to which IP address in the LAN to send it to. But the notion of NAT is to deliver and to allow connectivity. This has nothing to do with security or a firewall.
Thus, if you want to use a real firewall use the PIX. On the PIX you can configure the traffic which is allowed to enter the LAN and which not. It is far superior in this respect to the WRT. However, as it is a older model, I cannot tell how fast the PIX is. You should be able to find the old data sheets of the PIX somewhere on the cisco website. They should mention the possible throughput. I guess it won't be an issue.
To me another point for the PIX are the VPN capabilities which allow you to securely access your LAN while you are on the road.
Of course, you must know how to configure the PIX correctly. It is a complex device and can be configured pretty much for anything you like. This means of course if you do it wrong you may end up with little or no security.
BTW, there are no people from linksys in this forums except the moderators (which may be from lithium). To hear from Linksys you have to contact Linksys support. -
Pix 506e firewall configring for mail( Exhange), Web, FTP server
Hi
I am Hemant, We have pix 506e firewall, D-link ADSL dsl-502t and my IBM xseries 236 server.
I have fix static live ip 59.181.103.220 which i have got ISP (MTNL), and the same ip is given in fqdn in www.net4india.com (a company from where we have registered domaim name and taken space)
My problem is i am not able to send mail through my mail server (loyalindia.co.in)but i am receiving mails from any server.
My network design is as fallows:-
ADSL (WAN)59.181.103.220, ADSL (LAN)59.181.103.221. Pix 506e (out) 59.181.103.222, Pix 506e (in) 192.168.1.1. My domain mail server loyalindia.co.in (Exchange server) ip 192.168.1.2
I am tryied with (ADSL)natting and without natting but the problem is same.
If i am removing the pix 506e and directly connecting the server to adsl i am able to receive and send mails properly.
can anybody who can support me?.Hello
I think there won't be one QUCK START to get all of this up and running, there are multiple examples on the following page, a few that might help would be:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html
PIX/ASA : Connecting Three Internal Networks with Internet Configuration Example
PIX/ASA : Connecting Two Internal Networks with Internet Configuration Example
ASA 7.x/PIX 6.x and Above: Open/Block the Ports Configuration Example
PIX/ASA 7.x: Enable VoIP (SIP, MGCP, H323, SCCP) Services Configuration Example
PIX/ASA 7.x and FWSM: NAT and PAT Statements
PIX/ASA 7.x and later : Port Redirection(Forwarding) with nat, global, static and access-list Commands
Configuring PIX Firewall with Mail Server Access on the DMZ
Configuring the PIX Firewall with Mail Server Access on Inside Network
Please rate if you find the post helpful.
Regards
Farrukh -
Hi everyone! I just became in charge of a PIX 506E, which I have no experience with. I was not told how it was set up, what the password is, etc...Oh, and the dongle for the console connection is non-existent as well.
On Cisco's website, I can't find any manuals for it. The only documentation I could find was a quick setup guide, which is not helpful at all if it is already set up.
Basically, I am looking for any help anyone can provide so that I can get into the interface for the PIX 506E so I can see how things are set up and to change things in the future. Thank you in advance!This could be a long journey or a short one, but for sake to help you here we go..
When I say long journey it is because all depends on what type of resources you have at hand, at least you have us in netpro, but more specifically if you do not know the admin password for the PIX that is number one headache, you need password recovery procedure, please try to make an effort to obtain the password to not go through all these procedures, if you cannot then you need password recovery .
See password recovery.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml
Please have handy these tools
1- Console cable to connect to COM port in PC and PIX console port
2- Terminal emulator - hyperterminal
3- Mini hub to connect your PC and pix pysical interface to it
4- tftp server software running on your PC
Follow instructions on link.
As for instructions about the PIX there are hundreds of documentation in Cisco website, we can direct you to them but first you need to gain access to PIX.
HTH
-Jorge -
Cannot publish to HTML 5 or the "both" option
I cannot publish to HTML 5 or the "both" option. Also, It allows me to publish to SWF, and even though I check "view output after publishing", I can't. I'm on the Trial...so is this a limitation of the Trial?
Thank you!The trial version is only limited to 30 days of functionality. All other features are fully functional.
You say you can't publish to HTML5 or both. What is preventing you from publishing to these outputs? Are they grayed out? Do you get an error?
You can't view SWF output. What happens when the presentation publishes as SWF and it attempts to launch in a web browser? Have you tried going to the published presentation's location and double clicking on the index.html file? Do you get any kind of error messages? -
Can PIX 506e return port unreachable
Hello
Can PIX 506e return ICMP port unreachable on Linux traceroute with UDP data gram, and if somebody knows how, can you make an example of the access-list how it should be written to allow this response?PIX won't return an ICMP port unreachable message and access lists cannot be configured to make PIX to respond a port unreachable.
-
HP 635 got a Virus that plays ads in the Background and was not even present in the system manager, I did a restore system several times and could not finally did but now I cannot even startup, ask for a disk!!! Yikes
This question was solved.
View Solution.Hi:
Call HP technical support for the country you live in at the link below.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Call the number listed for business desktops/notebooks and order a set of recovery disks for your model.
You will also need to provide the serial number to the customer services rep. -
Pix 506E SNMP V3??
Hi Everyone,
i know this is an old unit but, was trying to find an article if the pix 506E support snmp version 3.
thanks,
JasonHi Jason,
Unfortunately SNMP version 3 is supported only on ASA 8.2 or higher:
http://www.cisco.com/en/US/docs/security/asa/asa82/snmp/snmpv3_1.html
Thanks,
Varun Rao
Security Team,
Cisco TAC -
Hi,
We have planning to Purchase Cisco Pix 506E Firewall. We are having 50
Computers & Users.If we purchase Pix 506E Firewall,its require to purchase
any aditional license.
with regds
premFor the PIX 506E there is only one license that can be purchased which is the 3DES/AES and DES Encryption Licenses. Right now I think you can download that license for free. The following link will provide you with details on that license and the data sheet on that PIX (scroll down about half way for the license information).
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheet09186a0080091b13.html
The following link will give you the data sheet and describe the three different licenses available with upper models of the PIX as it relates to the 515E (restricted, unrestricted, and failover).
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheet09186a0080091b15.html -
WRT110N Cannot Browse Network PCs after restart
I was able to browse Network PCs from XP [somehow cannot do so when in Vista - to browse XP PCs]. Now after restart I cannot browse any network pcs. I had hard reset the WRT`110 and disable all firewalls from all pcs and no antivirus running. What am I missing? It says unable to browse PC due to service not being started etc... and restarted it ..... still no go. This is from XP to Vista. I pressed the little reset button on the back of this. Strangely when transferring files between pcs 2 hrs ago was quite slow... any way to speed this up?
Message Edited by pectin232 on 04-21-2008 12:49 PMLonny,
Which version of RV042 do you have? Have you check to see if you are on the latest OS code?
Firmware
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&softwareid=282465789&release=4.0.4.02-tm&relind=AVAILABLE&rellifecycle=&reltype=latest
Now check the release notes of the code you are running- this is to verify that it’s not a known issue.
http://www.cisco.com/en/US/products/ps9923/prod_release_notes_list.html
Have you tried different PC operating systems?
I haven’t seen any cases come though the support center with this error. You can give us a call @ 1-866-606-1866 if you would like us to take a look at your configuration.
Hope this helps,
Jasbryan -
ITunes 7 cannot browse album covers on this computer error and crash
Installed iTunes 7 yesterday, and now every time I try to go to certain pages in the iTunes store, such as movies or tv shows, I get an error saying "iTunes cannot browse album covers on this computer". Then iTunes immediately crashes. Has anyone else had this problem? Any fix??
Compaq Windows XPI have the same issue. Not sure if this has anything to do with it, but I was on the Cover Flow View and it was working fine. I clicked on the full screen icon and the entire screen went random (meaning totally random pixels of color all over). I pressed the escape key and the normal screen returned, but it only showed a black section where the covers had previously been. I restarted iTunes and it started giving me the same message. I also can see them in the lower left and on the Album View. Just the Cover Flow view doesn't work. I downloaded the latest iTunes today and I keep all of the Windows updates on.
-
Firefox freezes when I open it. I can see my homepage (incomplete) but I cannot browse. The cursor moves but cannot open anything. If I close and reopen firefox it works fine.
== This happened ==
Every time Firefox opened
== I updated to the latest version of firefoxThese issues are usually caused by firewalls. See [[Cannot connect after upgrading Firefox]]
-
The 3G symbol does not show up on my home page and I cannot browse the Internet or receive mail. Any advice?
reset the iphone
1. press the wake/sleep button the top until you get the red slider
2. Slide to power off
3. Wait for phone to power off (you get a spinning gear icon for a while)
4. press the wake/sleep button to turn in back on.
if that doesn't work reset network settings
1. Go to Settings->General->Reset->Reset Network Settings
2. Confirm that you want to do this and the phone will restart itself
if that doesn't work restore the phone in iTunes, but you will want to sync all of your data before you do that.
Maybe you are looking for
-
Hi, In my previous endeavours to solve this business requirement where multiple users will be able to use the Adobe acrobat feature to convert SAP pages inside SAP to PDF, I was told that it is not possible to do this for multiple users at the same t
-
Safari has stopped allowing me to enter full screen mode. Why?
Safari will not allow me to enter full screen mode. This is a new occurrence as it has always worked before. When I either click on the two arrows on the top right of the browser or go to View > Enter Full Screen the browser makes a sound and remains
-
How to create an email "leave a reply" section
I need to know how to create somthing like the "leave a reply" section from this link. http://www.magpress.com/blog/introducing-adobe-edge-web-fonts-alternat ive-to-google-web-fonts
-
4.0 EA2 - Autofit not working properly in Query Result grid
Hi, in 4.0 EA2 the Autofit isn't working properly in Query Result grid. Rather than shrinking columns to the narrowest size that accommodates headings and contents (as per 3.2), it auto-expands to fit the whole data query grid. It looks worse, and ma
-
Connecting multiple CRM systems to one backend R/3 and vice versa
Hello experts Can you tell me whether it is advisable to connect 2 CRM systems to a single backend R/3 and vice versa? Is it recommended by SAP? I require some notes or docs on this. I got some notes on this forum but they are all Internal ones which