PIX 515 issue after trying to upgrade from 601 to 622

Hello,
I am having the following problem on my Cisco PIX 515:
I had been running:
Cisco Secure PIX Firewall Version 6.0(1)
PIX Device Manager Version 1.0(1)
Hardware: PIX-515, 32 MB RAM, CPU Pentium 200 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB
I upgraded the PIX to pix622.bin. That seemed to work, but the PIX did not boot after reload.
So I reverted it to pix601.bin.
That seemed to work, and my configuration file was still in place and all my services worked as before.
However, upon reload I get the following error:
Reading 2445824 bytes of image from flash.
32MB RAM
imgsum_config: sumval(0x1f8e) md5(0x95937073 0x75b817db 0x54d7811a 0xba7d0214)
imgsum_verify: chksum(0x 0) md5(0xf9d77cec 0xfca32e88 0xb13f21e9 0xfa81733b)
Panic: kernel - The checksum verification for this image failed.
Thoughts? Help?

You get this error using the console right?
Mike

Similar Messages

After trying to upgrade from 4.3.4 to 5.0 stuck on recovry and giving error every time im trying to restore

after trying to upgrade from 4.3.4 to 5.0 stuck on recovry and giving error every time im trying to restore
what to do ?
tried tiny umberlla dost do anything

What OS is on the Install/Restore DVD that came wit your G5? If Tiger 10.4.x, you will need a black, retail Leopard install DVD. There is no free download of Leopard, only free updates once you have installed the base OS.
First use your Mac's Install/Restore DVD to install an OS & apps. Then upgrade the OS.
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

Ipod touch now frozen after trying to upgrade from 1st gen to 3.1.1

I've got a 1st gen ipod touch and bought the upgrade software from i-tunes to upgrade it to 3.1.1 so I can add apps to my ipod touch. It started off well but then just froze!! My ipod touch has the apple logo and a progress bar which is partly completed. I left it for ages and nothing progress and when I checked Itunes it said it was no longer responding. I shut itunes down and tried to restart it but it just keeps saying its not responding. Any idea on what I can do to get my Ipod touch back to 1st gen or to complete the upgrade to 3.1.1?

- Try resetting the iPod;
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next connect to computer and try to restore via iTunes- Next see if placing the iPod in recovery mode will allow a restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- If you can't turn the iPod off (e.g., logo, spinning wheel) always shows, let the battery fully drain. After charging for an hour try the above again.

CAnnot upgrade serial number after download. 'This serial number is not for a qualifying product'. Trying to upgrade from ACS 5.5 Design Premium to ACS 6 Design Standard

Cannot upgrade serial number after download. 'This serial number is not for a qualifying product'. Trying to upgrade from ACS 5.5 Design Premium to ACS 6 Design Standard

start the installation of design premium cs5.5 just to make sure you're using the correct serial number. once your serial number is accepted you'll see a screen giving you the option to install none, some or all of the cs5.5 programs. at that point you can quit and not install anything having verified your cs5.5 serial number if you want nothing cs5.5 on your computer.
on the other hand, if your cs5.5 serial number is not accepted, you'll pinpoint the problem.
or, if your cs5.5 number is accepted, you could install a cs5.5 program and then install cs6. it should recognize you have a cs5.5 program installed and NOT prompt you for you cs5.5 serial number allowing you to continue with your cs6 installation.

!!!HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

Please google search for "Mountain Lion disk crash" before upgrading you mac pro. You might need to replace you Mac hard drive after the upgrade.So many people had the same problems including me.
Be aware of the Mountain Lion upgrade problem.

I'm trying to upgrade from 10.5.8 to Snow Leopard

I'm trying to upgrade from 10.5.8 to Snow Leopard but keep getting an error message, "This update requires Mac OS X version 10.6.". Isn't Snow Leopard 10.6?....so now what?

It sounds more like you are trying to use an updater rather than the Snow Leopard installer DVD. You might read over the following:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

After trying to restore from time capsule, I get the following message when I try to access the folder "data." The folder "Data" can't be opened because you don't have permission to see its contents. Any ideas?

after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents." Any ideas?

Are you restoring from a TM backup??
Check the methods Pondini outlines to do restore.
Q14-17
http://pondini.org/TM/FAQ.html

I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc. It started to install the first time and said it needed to restart to finish, restarted but ejected the disc. It ejects every time now.

I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc. It started to install the first time and said it needed to restart to finish, restarted but ejected the disc. It ejects every time now. I've also installed the 10.5.8 combo update but that didn't help it. I've tried restarting the macbook with the disc in, holding c, all that. Why won't this work?!

Zap the PRAM and Reset the SMC, then try again.

I'm trying to upgrade from an iphone 4 to an iphone 5. How do I deactivate my iphone 4 in messages so I can receive them on my iphone 5?

I'm trying to upgrade from an iphone 4 to an iphone 5. How do I deactivate the iphone 4 so I can receive my messages and mail on my iphone 5?

Settings --> Messages

Issue when trying to upgrade FB 4.7 to AIRDSK 3.6

Hi,
I'm desperately trying to upgrade FB 4.7 to AIRSDK 3.6 since 3 weeks.
I've followed the various solutions found on forums and the various processes displayed by the "helpx.adobe.com" pages, but none of them works.
So please, if a member of Adobe Support Team or someone who succeeded to perform the upgrade reads this, I need help and if possible a detailed strp by step process.
Thks in advance for answers.

I think i tried all the available ones, and there are many. Why can't we
have a definitive automatic upgrade solution instead of having to do
such a number of manipulations ?
Le 14/03/2013 04:41, Flex harUI a écrit :
>
Re: Issue when trying to upgrade FB 4.7 to AIRDSK 3.6
created by Flex harUI <http://forums.adobe.com/people/Flex+harUI> in
/Flex/ - View the full discussion
<http://forums.adobe.com/message/5146932#5146932

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

Trying to upgrade from 10.4.4

I am trying to upgrade from 10.4.4 to 10.4.8
For some reason the installation didn't work.
It jst sat there stuck for a long time.
I finally cancelled the installation and restarted.
Though now Mail doesn't work.
any idea what's going on?

For some reason the installation didn't work.
It jst sat there stuck for a long time.
How did you obtain the 10.4.8 update? Were you running the Installer application & if so where in the process was it stuck?
I finally cancelled the installation and restarted.
How did you do that? Did you get any warning when you cancelled the installation?
Though now Mail doesn't work.
any idea what's going on?
Most likely, you had some underlying file system or permissions problem that interfered with the installation & canceling it left the OS in an unknown state.
I suggest you first try running Disk Utility's First Aid repairs on your startup volume while booted from your Tiger installer disk. If it reports no errors or is able to fix any it finds, then reboot from your normal startup volume & try to download & install the combo version of the updater matching the version of the OS you want to end up with.

HT1338 I'm Trying to upgrade from Mac OS X 10.5 to Mac OS X 10.6, but my imac won't let me... and yes it's intel based

I'm Trying to upgrade from Mac OS X 10.5 to Mac OS X 10.6, but my imac won't let me... and yes it's intel based

Hello, what exactly happens when you try?
Os it a Retail Install Disc, or did it come with a different Mac?
Fo you have enough RAM & Free space?
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.

Can I remove photoshop cs2 after I have upgraded from cs2 to cs5?

Can I remove Photoshop CS2 after I have upgraded from CS2 to CS5? I upgraded from CS2 to CS5 quite a while ago and I have never removed CS2. Will it affect CS5 to remove the old CS2 if it was an upgrade?

If I were you I would just delete the installed Adobe CS2 folder. Adobe CS2 uninstaller my remove settind CS5 made to your system after CS2. The CS2 uninstaller may try to restore settings to a point in time where there was no Photoshop installed on your system. If you do a CS un-install you may need to then Install CS5 on top of itself the update cs5 for the install will not have the updates you will be back at CS5 level .

Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

Restore ur iPad to iOS 5 or 6( if u have downloaded)
<edited by host>
Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
Then set up your iPad as a new iPad .
Here you go, Now your iPad will be perfectly fine..

PIX 515 issue after trying to upgrade from 601 to 622

Similar Messages

Maybe you are looking for