Pix 525 6.3 Password Recovery shuts down TFTP server
I noticed that everytime I try to run the password recovery procedure to retrieve the np63.bin file from my tftp server, the pix hangs and the tftp app shuts down completely. I am investigating but if any one knows off the top,,I would appreciate the sharing.
I got it...I'm not sure what it was but as soon as I plugged both inside and outside interfaces in that allowed the file to be received. I guess that's the way it works. The document must presume you know this.
The "Duhs" have it! Motion passed!!
Similar Messages
-
How to avoid shut down BPELPM Server when creating a user?
Hi,
How to avoid shut down BPELPM Server when creating a JAZN user and after doing changes to user-properties.xml?
Thanks,
Jorgethis configuration is only supported on a midtier - there is a work around for a standalone install, nevertheless I would not recommend this for production ..
if this is NOT a production enviroment - I can try to get you the information .
/clemens -
Tuxedo transaction branch in GMTREADY and cannot finishit without shutting down weblogic server
Trying to reproduce a problem in an application we are deployed a servlet in a
weblogic 8.1 sp2 server, doing the folowing:
1. Begin a transaction
2. Call a tuxedo service (tuxedo 6.5) via tuxedo gateway "A"
3. Call another tuxedo service (tuxedo 6.5) via tuxedo gateway "B"
4. Before commit the transaction in the servlet, we shutdown tuxedo gateway "B"
5. After commit transaction branch via gateway "A" remains indefinitely in GMTREADY
state, while transaction branch via gateway "B" gets GMTABRTONLY after timming
out.
After commit(that fail doing rollback), transaction is not reported like inflight
in weblogic server. We cannot finish transaction branch in GMTREADY state. Only
after shutdown weblogic server, and after an undetermined time(sometimes a lot)
transaction branch is rolled back.
While transaccion is not rolled back, all locks in DB remains active.
How we could finnish that branch without shutting down weblogic server, or, if
not, how we could control the time in witch transaction is rolled back?We open a case with BEA eSupport and the servlet problem was a bug. Engineering
got a
temporary patch that seems to solve the problem. The case continues trying to
solve our original problem (the servlet was to reproduce the situation).
Thank you very much.
Jose Emilio Ortega.
"Todd Little" <[email protected]> wrote:
>
Hi Jose,
Can you provide a little more information. In particular, what are the
JTA timeout
values configured for your WLS application? Did you set the interoperate
setting
to Yes under the WTC local access point's connection settings? When
you begin
the transaction in the servlet, do you specify a timeout value and if
not, do
you know what your thread's default transaction timeout value is?
If possible, can you post or e-mail your WLS's config.xml and the domain
configuration
files for the two Tuxedo domains (not the UBB files, although those would
be helpful
as well.)
Thanks,
Todd
"Jose Emilio Ortega" <[email protected]> wrote:
Trying to reproduce a problem in an application we are deployed a servlet
in a
weblogic 8.1 sp2 server, doing the folowing:
1. Begin a transaction
2. Call a tuxedo service (tuxedo 6.5) via tuxedo gateway "A"
3. Call another tuxedo service (tuxedo 6.5) via tuxedo gateway "B"
4. Before commit the transaction in the servlet, we shutdown tuxedo
gateway "B"
5. After commit transaction branch via gateway "A" remains indefinitely
in GMTREADY
state, while transaction branch via gateway "B" gets GMTABRTONLY after
timming
out.
After commit(that fail doing rollback), transaction is not reportedlike
inflight
in weblogic server. We cannot finish transaction branch in GMTREADYstate.
Only
after shutdown weblogic server, and after an undetermined time(sometimes
a lot)
transaction branch is rolled back.
While transaccion is not rolled back, all locks in DB remains active.
How we could finnish that branch without shutting down weblogic server,
or, if
not, how we could control the time in witch transaction is rolled back? -
Database doesn't shutdown during shutting down the server
Dear Friends ,
I have to use the following dcript to use Auto startup and shutdown my Oracle Database in RHEL 4 .
step 1:
#!/bin/bash
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
# Set ORACLE_HOME to be equivalent to the $ORACLE_HOME
# from which you wish to execute dbstart and dbshut;
# Set ORACLE_OWNER to the user id of the owner of the
# Oracle database in ORACLE_HOME.
ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
ORACLE_OWNER=oracle
if [ ! -f $ORACLE_HOME/bin/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
'start')
# Start the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORACLE_OWNER -c "$ORACLE_HOME/bin/lsnrctl start"
su - $ORACLE_OWNER -c $ORACLE_HOME/bin/dbstart
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORACLE_OWNER -c $ORACLE_HOME/bin/dbshut
su - $ORACLE_OWNER -c "$ORACLE_HOME/bin/lsnrctl stop"
esac
step 2:
cat /etc/inittab
*:/u01/app/oracle/product/10.2.0/db_1:N
orcl:/u01/app/oracle/product/10.2.0/db_1:Y
step 3:
Keep "dbora" in following path :
/etc/rc.d/rc3.d/dbora
/etc/rc.d/rc5.d/dbora
/etc/rc.d/init.d/dbora
And also ,
chmod 750 /etc/init.d/dbora
chkconfig --level 345 dbora on
Now ,The script works fine and ORacle Database and Listener service starts automatically during startup the server .But during shutdown the server, I cannot understand or can't recognize that the Oracle Database & listener service are shutdown auto . I think it does not work properly..... So i need to know that Oracle Database & listener service are stop automatically during shutting down the server . Using the above scripts , How can I do it ? Is there any wrong then plz advice me .......Thx ...step 3:
Keep "dbora" in following path :
/etc/rc.d/rc3.d/dbora
/etc/rc.d/rc5.d/dbora
/etc/rc.d/init.d/dbora
And also ,
chmod 750 /etc/init.d/dbora
chkconfig --level 345 dbora on
Check following links are there
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
Script/link start with "K" , is responsible for shutdown database.
Check following Oracle Documentation link , it explain all in details
Starting and Stopping Oracle Software
- Virag Sharma
http://viragsharma.blogspot.com
http://virag.sharma.googlepages.com -
TNS-12638 when shutting down the server
Everytime when we shut down the database server (Win2K, Ora 9.2.0.1.0) we
get the following entries in the log files:
ora.log:
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracletest2)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=test2)(CID=(PROGRAM=c:\oracle\ora92\bin\ORACLE.EXE)(HOST=CAESAR)(USER=SYSTEM))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Everytime when we shut down the database server (Win 2k) we receive the following entry in the file ora.log:
Windows: Version 9.2.0.1.0 - Production
Time: 19-MÃ??R-2003 18:58:00
Tracing not turned on.
Tns error struct:
nr err code: 0
ns main err code: 12638
TNS-12638: Abrufen der ID-Daten nicht erfolgreich
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
sqlnet.log
Fatal NI connect error 12638 ns secondary err code: 0
N=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
nt main err code: 0
Version 9.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 9.2.0.1.0 - Production
VERSION INFORMATION:
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 9.2.0.1.0 - Production
Time: 19-MÃ??R-2003 18:58:00
Time: 19-MÃ??R-2003 18:58:00
Tracing not turned on Tracing not turned on.
Tns error struct:
nr err code: 0
ns main err code: 12638
TNS-12638: Abrufen der ID-Daten nicht erfolgreich
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Tns error struct:
nr err code: 0
ns main err code: 12638
TNS-12638: Abrufen der ID-Daten nicht erfolgreich
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
We use SQLNET.AUTHENTICATION_SERVICES= (NTS).
We get the error only when we shut down the server. The database was created with the database configuration assistant. Thankscheck the file sqlnet.ora (ORACLE_HOME\NETWORK\ADMIN)where the database is installed for an entry like SQLNET.AUTHENTICATION_SERVICES= (NTS). If so, disable it.
-PK -
Shutting Down the server using Xyplex ?- Root passwd not known for Decomiss
Hi All,
I am on run level 3 and need to get to run level 0 through xyplex console.The server is on run level 3 .I know there are controls for xyplex to get to run level 0 - ctrl a + ctrl b.But these are not working.I dont have the access to the server rite now.Only access to console but I cannot login to the server.( it was decommisnned).Does anybody know how to get to run level 0 or shutting down the server through xyplex.step 3:
Keep "dbora" in following path :
/etc/rc.d/rc3.d/dbora
/etc/rc.d/rc5.d/dbora
/etc/rc.d/init.d/dbora
And also ,
chmod 750 /etc/init.d/dbora
chkconfig --level 345 dbora on
Check following links are there
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
Script/link start with "K" , is responsible for shutdown database.
Check following Oracle Documentation link , it explain all in details
Starting and Stopping Oracle Software
- Virag Sharma
http://viragsharma.blogspot.com
http://virag.sharma.googlepages.com -
Things to consider before shutting down the Server
Hi,
What are all the things to consider before shutting down the Essbase Server?
Just we need to close the applications and Agent process or do we need to take care any other things also.
Thanks in AdvanceIn order to make sure of a soft shut down, I normally would
- Disconnect all users
- Prevent connections
- Unlock all objects
- Shut down all databases and applications
- Shut down the Server Agent
Brian Chow -
Product Recovery shuts down unexpectedly on Satellite 1900-303
I have the correct Product Recovery disk and have got the recovery screen by holding down "C". I press 1 and the 1 again to do a full wipe clean. The progress indicator bar then show progress until about the 25% level (takes around 5 mins) then machine shuts down.
Has any one experienced this issue? Greatly appreciate any comments ideas. Many thanks, Brendan.
[Edited by: admin on 22-May-05 20:26]I found the problem. The shutdown was occurring because during recovery the "system" (System = hard disk/dvd reader?) is under high stress requiring the fan on 100% for cooling. My fan intake on the bottom of the machine looked clogged so I blew it and lots of fine dust came out.
I then retried and it worked. Presumably, the shutdown was because of overheating of the "System" (not exactly sure of which bit - but whatever bit was getting too hot). How about that for a low tech answer?
Sorry it was not more interesting! Brendan. -
Admin name/password when shutting down
Here's a weird one. Just got a MacBook and transferred data/settings etc. from iBook using firewire. Everything seems to work, except: when multiple users are logged in, and I try to shut down, it asks for Admin name/password in order to shut down. Same as iBook, except the MacBook doesn't recognize either the name of the Admin or the password (don't know which). The admin password worked for installing software updates, so I'm totally confused. I reset the admin password using the install disc, but it still doesn't recognize the name or password. Anyone have a clue to help? Log in password works, as does the app. install (as I mentioned).
Thank for the hint, James!
There was a problem with an "extra" user logged in - "_xcsbuildd ".
"sudo xcrun xcscontrol --reset" completely removes the Xcode Service including the _xcsbuildd user. -
Hi,
since the latest Windows XP Updates the password manager is starting up on my T61p, but it's showing only the "About" Dialog Box with a OK button. After clicking on OK the program shut down. I'm running on Version 8.10.0006.00 of CSS.
Besides the Lenovo Message Center is starting with an empty dialog box even and is shut downed also.
Thank's for some help.
UlrichI recreate password file successfully on the different OS (windows 2k server). I guess that it might be very identical conceptually. This is what I have done:
1. shutdown the instance.
2. delete the pwdfile under oracle_home\database, (oracle_home/dbs under Unix environment).
3. create a new pwdfile as you did under the proper directory.
4. log in the server manager (svrmgrl) with sysdba role and restart the instance. It should be ok with new pwdfile.
Hope it helpful.
R. Wang -
hello to all, i have a problem with my Toshiba A305D-S6848, it's my first time to recover this laptop then, idk what to click.. at first when i insert the disc 1, then started the laptop and an option pop out i selected the 2nd option and it says deleting all of the stuff in my hard drive, then after a few hours when it's finish it said , its done deleting and the cd open up and the laptop was shut down by himself, then i wait if it's going to restart but it didn't . when i start it the toshiba loads and then a while it said "OS not found" what should i do? i don't even use my second disc? and when i start it again to do the step again it just show a black screen with this one "_" and it shutdown help me..
Satellite A305D-S6848
after you recovered your laptop what mostly program or softwares do you install??
I would get rid of all the trial software. See the spec above. I would replace Norton 360 with Microsoft's Security Essentials.
The only application I feel is essential is a full-system backup. The following three are good.
Norton Ghost
Acronis Trueimage
Storagecraft Shadowprotect
We make an image every night for every machine.
-Jerry -
Error while shutting down 'Admin Server' from administration console
hi,
When I try to shutdown admin server from administration console(Weblogic server>Control>Shut Down...) I get this error:
No Machine associated with server AdminServer. Please associate a machine to this weblogic server using weblogic console first.
Not able to understand what this means....
thanksRead up on Node Manager - a outside-of-WLS-process that can start/stop WebLogic on your OS instance. Node Manager uses the "machine" concept.
http://download.oracle.com/docs/cd/E12839_01/web.1111/e13740/overview.htm
http://blogs.oracle.com/jamesbayer/2010/01/weblogic_nodemanager_quick_sta.html -
Shutting down a server remotely
I wonder if somebody has a solution to shut down multiple servers at once ? I look for a solution that shuts down slave servers when the master server is shut down (either automatically by a UPS software or manually by the admin).
Is there a way to achieve this ?You could do this in theory with a logout hook. I've never done this exactly, but I think it could be done. One problem is that it would probably require the root user to be enabled though (at least for ssh login- which is risky). Then you could send the command ssh root@ServerToShutdown shutdown -h now. SSH would also have to be setup with public key access trust from the main server to your other servers.
So you're not SOL- but it is a risky venture security wise. Maybe someone smarter will think of another way that is more secure?
good link on logout hooks: http://www.bombich.com/mactips/loginhooks.html
good link on ssh public keys:
http://www.bombich.com/mactips/rsync.html -
Apache error : caught SIGTERM, shutting down FileMakerPro Server Advanced
Installed mac OS X Server 10.4.7 onto Mac Mini 1.66 Ghz Intel Core Duo
updated to 10.4.8 repaired disk permissions restarted
start web services - open browsers - view web sites - OK
install Filemaker Pro Server 8 - host databases
web services working well
install Filemaker Server Advanced 8 (Web Publishing Engine) = restart
no web services
error log = [Tue Mar 13 12:32:18 2007] [notice] caught SIGTERM, shutting down
this configuration works perfectly on a G4 with seemless integration
all software is universal
any ideas would be greatfully receivedI did as you said and installed FMSA8 again on teh same mac and then ran the command in terminal - here is the result:
Processing config directory: /etc/httpd/sites/*.conf
Processing config file: /etc/httpd/sites/0000any_80gavsgems.co.uk.conf
Processing config file: /etc/httpd/sites/0001any_80ggems.co.uk.conf
Processing config file: /etc/httpd/sites/0002any_80karlgav.co.uk.conf
Processing config file: /etc/httpd/sites/0003any_80karmics.co.uk.conf
Processing config file: /etc/httpd/sites/0004any_80ktback.co.uk.conf
Processing config file: /etc/httpd/sites/0005any_80fmweb.conf
Processing config file: /etc/httpd/sites/virtualhostglobal.conf
Syntax error on line 1 of /Library/FileMaker Server/Web Publishing/web-configuration/WEB-INF/conf/mod_jk.conf:
Cannot load /usr/libexec/httpd/modjkfm.so into server: (reason unknown) -
What happens in background when we shut down Glassfish Server.
Hi,
I would like to know the process happens in background when we shut down the Glass fish server either from Command Line or from All Programs option.
Thanks,
Ajay SharmaHi;
The document u provided doesnt exists on metalink.You right i cant even open note (I know note from one other note's references)
Please check below Notes:
How To Relink and Bounce the Receiving Executables? [ID 552702.1]
NOTE:131321.1 - How to Relink Oracle Database Software on UNIX
NOTE:141118.1 - How To Relink Forms Library Files Using Adadmin
Hope it helps
Regard
Helios
Maybe you are looking for
-
Hi Experts, I am customizing the Purchase Order detail Report .Here I need to add total tax details . I found tax details are in po_distribution_all table.Here tax amount is caluculated for each and every line. in po_distribution table we have recove
-
Better option would be that it stays still so that I would not have to scroll to the song I am currently listening to. For example if I am listening to a song number 94 in the playlist it is irritating to scroll from the very beginning. best wishes,
-
I bought my iMac in June, Just went into disk utility and I noticed that the 1TB drive was red. I've clicked on it and it says that "This drive has a harware problem that can't be repaired. Back up as much of the data as possible and replace the disk
-
[SOLVED] Wireframe architectural 3D rendering?
I finally found what I needed: I was looking for "Parallel projections" I am implementing this in java, so hopefully there may be a helpful API, but I suspect that I just need a good keyword to google with. I know a fair amount of basic trigonometry,
-
So, how do we make them pay?
The fact everyday there are more posts like this: http://community.vzw.com/t5/4G-Discussion/4G-Network-issues/td-p/688407 basically indicate nobody is finding out about the 4G problems until too late like us. So somehow we have to get more attention