Pix are not centered when i print . tryed everything i kow to fix problem, help me please

Like I said (re-above) I can't fix or figure out why my pix are printing out not centered on paper .. I tryed everything that I know and it's starting to cost to much to just print pix and keep getting the same result . Please Help me if you can. Thank
you.

What printer are you using?
What OS are you using?
What program are you using to print?
What kind of paper are you printing on?
How is the printer connected to the computer?
HP designed a quick and easy tool that diagnoses and resolves many printing, scanning, and connectivity problems: The HP Print and Scan Doctor. HP recommends that you download and install the Print and Scan Doctor any time you need to troubleshoot a problem with your HP printer from the link below.
Let me know what errors you receive?
HP Printer Utilities Page
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

I think somebody is hacking my visiting websites and ip address.Some sites are not opening.When I am trying to open mozilla 1 message box is being displayed stating that one firefox is being opened and not responding first close it & restart the system.

At present 2 websites are not opening. When I am trying to open these sites either "problem loading page or the website you are looking is not present". These two messages are being displayed.

Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.

Crystal Reports are not centered when viewing on Crystal Viewer

Hi
I´d like to ask you if you reported some problem of using subreports and during the visualization from the Crystal Viewer the main report and of course the subreports are not centered. I´m running Vs.Net 2005 with CR 10.
The main report and subreports access ADO.NET. Only one parameter is passed by the user. If we test the application and address the visualization to the crystal report viewer it is showed on right side even using DisplayGroupTree = False. But if we export the report to PDF it is showed centered. Is it a way to fix this one?
Any advice or suggestions?
Tks,
Isocler

When you say you're using v10 with VS2005, do you mean the full CR v10 product or the version that comes with VS.NET 2005 (version 10.2)? Make sure you're using/referencing the 10.2.* CR assemblies in your project, as the 10.0.* are not supported.
If you have the correct assemblies referenced, then make sure you have the latest patches applied. I think there may have been a fix for DIV tags.
-MJ

Smartform - Borders are not appeari when iam printing in DOTMATRIX Printer.

Hi,
I have Created a Smartform. When iam taking printout in Deskjet, borders & Line spacing
is comming Correctly. When i try to Print using the Dotmatrix borders & Lines are not
appearing.
Regards
Praveen

Hi,
Check the assigned page format to your custom device type. Try to assign all the page format which are available for
HP*** which you gives you desired result.
Regards,
Vamshi.

Flash can not parse this document. - Tried everything: Searching online, Calling Adobe, Online Help

I have tried everything in fixing this problem. I have searched online with no help. And Google does not fix everything.
I have tried calling the phone number on the help site numerous times only to be uselessly helped once. I was on hold for a long time with each one only to be unsuccessful in fixing my problem.
I tried submitting the form on the page when you sign in and 3 times so far I was told to go to this extremely unhelpful devnet, which was all the phone support told me to do which was no help, and they closed all of the support requests.
Does anyone know how to fix these errors:
Flash can not parse this document.
An error occurred opening file '.fla'
Failed to open document..fla.
I have converted it to a zip and went through all the files and did not see any error. The only one I did was MobileSettings.xml, which is blank and a new CS5 made file is blank and gives the error as well.
Does anyone know how to fix this?

you may have a corrupt fla. try creating a new directory that has no subdirectories. move that fla to the new directory. try and open the fla from the new directory. if it fails, you have a corrupt fla and, in that situation, i believe the best you can do is to take your last working swf and decompile it to create a working fla.

The colors are not true when i print and my sd card will not fit printer

The printer is hp7515 and the color of trees are blue and the water is purple,
i can not get my SD card to fit into printer

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My security answers are not accepted when downloading movies. Why

My security answers are not accepted when downloading movies.TRIED restting the security question that did not work. Called apple support --- no help.
I'm at a lost PLEASE HELP

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

Pictures are not shown when saving to PDF. Cannot Preview Print Job.

Help! Pictures are not shown when saving to PDF. Cannot Preview Print Job.

I guess you need to fix it
Or if you would like some help provide some information - there are no mind reader supporting this forum and we can only work with the information you give us - right not that is "it does not work"
iPhoto has no "save to PDF" function - exactly what are you doing? and what exactly do you want to do?
LN

Themes are not present when trying to make a card.

Themes are not present when trying to make a card. ??

Greetings,
You need to reinstall iPhoto.
Questions:
What version of iPhoto are you running (iPhoto > About iPhoto)?
What version of the Mac OS are you running (Apple > About this Mac)?
General steps:
Remove the following files to the trash:
Macintosh HD > Library > Application Support > iPhoto (if present)
Macintosh HD > Library > Application Support > NetServices (if present)
Macintosh HD > Library > Receipts > iPhoto (anything with iPhoto in the name)
Macintosh HD > Applications > iPhoto
Insert the iLife install disk you have or the Applications disk that came with your computer and reinstall iPhoto: http://support.apple.com/kb/HT2604
Once installation is complete go to the Apple > Software update and repeat this until no additional updates are offered.
Hope that helps.

The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad. Restrictions are not enabled and when they are those applications are grayed out. I have tried everything but restoring my iPad to its orginal condition. What do I do?

The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad. Restrictions are not enabled and when they are those applications are grayed out. I have tried everything but restoring my iPad to its orginal condition. What do I do?

todaywillbegreat wrote:
''' I have tried everything but restoring my iPad to its orginal condition. What do I do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

Hi Guys,
I am facing very critical issue on down Payment request, to process with saperate Tax Value.
We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
Below is the error message:
Down pmnts with taxes are not permitted when processing with jur.code
Message no. FS206

HI Preeti,
Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
Did any one seen this case in your experiece, if yes, what is the work-around solution?.
Need your help guys!,...
Regards,
Damodar Naidu

I cannot find information to help me change the orientation of a video filmed in portrait format but only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

I cannot find information to help me change the orientation of a video filmed in portrait format but it can only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

Thanks OT,
I tried the Export function but it would not allow me to choose the option of exporting to iMovie. I think you are right about needing Quicktime Pro. I opened iMovie and imported the clip from iPhoto and with some searching found the 'cropping, rotation' mechanism. So I now have a copy in the correct orientation. I plan to import/export it back to iPhoto because I want to have a copy on my iPhone to show people and I wanted to have it available as part of a slideshow I am making in iPhoto of my recent overseas trip. It is a pain that there is no simple orientating tool for the movie clips downloaded to iPhoto with the photos from the one camera.

Output Tray 2 does not work when we print a smartforms document immediately

Dear printer specialists,
we've the following issue:
We are printing the same smartforms document in different plants. One plant decided to get the print output into output tray 2 of the printer (lower tray), so we've copied the standard device type into a z-device type and made the SPAD set-up with a preselection for the tray 2 (lower tray). The new device type has been assigned to the output device. Now we made a test and released the print-output for an immediate printing. The output was printed as before in tray 1 (upper tray). When we restart the output from the spool (SP01), the output will be printed in tray 2. Why does this not work, when we print immediately ? Does anyone know how to solve this problem ? (We don't want to change the smartforms document.)
Thany you for every information to solve this problem.
Kind regards, Wolfgang

HI,
Check if there is a different tra setting in the smartform itself.
/nsmartforms -> <Form> -> Pages and Windows -> FIRST, NEXT, TERMCOND -> field Resource Name
Regards,
Aidan

On my screen the image is clear and the colors are right, However when I print to either my epson of HP the image color is off.

On my Mac screen my photo image is clear and the color are right, however when I print to either my epson 2200 or my HP printer bother the colors are off and the image is not as clear as on the screen.

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Jspf files are not interpretated when included? weblogic 8.1

Well My problem is that jspf files are not interpretated when included
          into jsp files. stuff such as netui tags are included as text and
          printed as such?
          Does this mean that jspf files are only for pure HTML?

Hey David
          I discovered the error its the special danish letters (which I cant even
          write here due to the charset). ae,oe,aa (???)
          When used as variable names in a jspf file and included they are
          misinterpreted. This is not the case in a jsp file.
          Its clearly a bug in BEA, but I replaced all occurrences and worked
          myself around it.
          David Karr skrev:
          > It's important to understand that JSP pages are compiled into servlet classes, and then loaded into the JVM. The servlet class is executed when the JSP page is loaded by the application.
          >
          > It's also important to understand the difference between an "include directive", and an "include action". The "directive" includes the text into the JSP page before it is compiled, so any JSP tags in the included text will be compiled as if they were part of the original page. The "action" includes the text at run-time, after the JSP is converted to a servlet and loaded into the JVM. If the result of your "include action" is a string of text with JSP tags, that string will be included in the result as-
          > is, without being compiled.
          >
          > From what you describe, I'm guessing you're using an include action, not an include directive. Reorganize your application to use include directives for your ".jspf" files, and you should be on the right track.

Pix are not centered when i print . tryed everything i kow to fix problem, help me please

Similar Messages

Maybe you are looking for