PIX-FLIX Text sent to phone, but actual video message does not appear in messaging area online.

I received a text message saying I received a Flix message. However I must access it by going online to vzwpix.com. So I went online right after and the website said it was down for maintenance. So I checked back a few hours later. I logged in. Went to Send Picture and Video Message. Then went to the Messaging Tab. However there was no message.
A few things come to mind why I might not have received my message. Since the person who sent the message had sent it during the time when the website was down, the message never went through?!
Another thing I noticed. When in my Picture & Video Messaging I see the Folders "Drafts" and "Sent Messages" however when I put my cursor over the "?" next to Folders it mentions a "Received Messages" folder should be included. However under the actual Folders the "Received Messages" folder does not exist. So maybe the message I was sent never had a default folder to be sent to?!
My phone was notified I was sent a message. I followed the directions. No message appears where it should be. Please help!
On a side note. I tried going to the "Contact Us" link at the top right of the page to get help. However, everytime I click it, refresh, etc. I get sent to the page "http://www.verizonwireless.com/backbutton.html". This is obviously a broken link.
Frusterated Customer seeking help ... Thanks in advance for help on this issue.

Still no answer to the question. Is this bogus or what?! I get a message from my Daughter-in-Law asking if I got my Mothers' Day song my grandkids sent this morning. No, I get this Flix message at this website text. Here I am now, registering and changing passwords I've never had to this 'forum' with no help and now Flix message. I''ve ignored these messages that I have received before now because of the drama. This time I follow through because of Grandkids for this.
I'm so frustrated that I've wasted so much of my time for naught. What do I tell the grandbabies? How can we avoid this from happening in the future? Was their song too long to send as picture/video message directly to my phone?
Why are their no answers anywhere? You've got to be kidding me.
Sore customer!

Similar Messages

  • Premier elements 11 (trial) tries to run but video editor does not appear

    I've installed trial version of Premier elements 11 OK and Icon appears on desktop. When I try to run it, I can see from my screen that it tries to load and initialise but the video editor does not appear. Any ideas? I'm running Windows 7 Home Premium. I can see the .exe appear in the task manager process list and then disappears after 10 or so seconds.

    Provide exact system info and crash details:
    Working with your Operating System’s Tools
    On a hunch I would say you face the good old "I need to update my graphics driver/ get a better graphics card" thing...
    Mylenium

  • HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

    Hi,
    I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
    Is there a way to make the iPhone try to open the login page?
    Ben.

    I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
    My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
    But, sometimes it works the first time or suddenly for no reason.
    Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

  • HT1766 How can I have my contacts back on my phone? some of them does not appear, others are still there ? How can I have them back?

    How can I have my contacts back on my phone? some of them does not appear, others are still there ? How can I have them back?

    Welcome to the Apple Community.
    Try unchecking the tones and syncing, then re-checking them and syncing again.

  • HT201250 i have plugged in a hard drive into my macbook, opened time machine, but my hard drive does not appear. why?

    i have plugged in a hard drive into my macbook, opened time machine, but my hard drive does not appear. why?

    Look in the Utility folder which is located inside the Applications folder.
    You don't want to do anything with the disk on a PC if you want it to work on the Mac. They both use different formats.
    Allan

  • I have selected to have photos in my icloud but the photo folder does not appear.

    I have selected to have photos in my icloud but the photo folder does not appear in icloud. There are many folders, like mail, but none for photos.

    You can see photo stream photos on icloud.com.  You can only see them on an iOS device or computer that is signed into your account with photo stream enabled.  If you want to see them on the web, you would have to add the photos to a shared stream using the public website option enabled (see http://help.apple.com/icloud/#/mmc0cd7e99).  This gives you a private url allowing you to view them from any computer browser.

  • How do I delete apps in os5? I press and hold the icon and they all begin to shake but the little x does not appear allowing me to delete.

    How do I delete apps in os5? I press and hold the icon and they all begin to shake but the little x does not appear allowing me to delete.

    You can't delete any of the Apple built-in apps e.g. Music, App Store, Game Centre etc. If you don't get the 'x' on any of the apps that you've downloaded then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'

  • Linking pages: i have published my site, but my page map does not appear.

    linking pages: i have published my site, but my page map does not appear.

    thanks Roddy,
    i had other issue as well. my server site could not be found, the music player did not show on the pages and my email opened up in compose, but anyone could go to my inbox, etc...
    i am using FTP server and hosted through godaddy and using their FTP manager.
    after making everyone's day that i communicated with i closed everything out and rebooted. now everything works with the exception of the email. i will have to use a different email address.
    thanks again

  • I have internet connection but my incoming email does not appear.  When I try to access new email it says, " connection to server has failed"  Help

    I have internet connection but myh incoming email does not appear.  When I try to access new emails it says, "connection to server has failed".  Help

    What did your email provider say about it when you contacted them?

  • I upgrate my iphone from 4S to 6, but my old apps does not appear on at, how can I get them back?

    I upgrate my iphone from 4S to 6, but my old apps does not appear on at, how can I get them back?

    Did you restore your 6 from a backup of the 4S?
    ~Lyssa

  • I am trying to set up Sharing amongst several computers on my home network.  I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up).  There is no explanation why.

    I have been trying to set up Sharing between two computers on my network. I did this once and it worked.  However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer).  There is no explanation as to why not.  Is this a configuration problem, a network problem or what?   Can it be fixed?  I have tried turning sharing off and back on on both computers but to no avail.  What am I missing?  Thanks for any help you can provide.

    Hey innerev2003,
    Thanks for the question, and welcome to Apple Support Communities.
    If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
    If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
    iTunes 11 for Windows: Manage your iTunes Store account
    http://support.apple.com/kb/PH12507
    Thanks,
    Matt M.

  • I have installed IOS5 on my iPhone. There is supposed to be a camera icon on the lock screen giving the ability to take a photo without unlocking the phone. That camera icon does not appear. Help, please.

    I have installed IOS5 on my iPhone. There is supposed to be a camera icon/button on the lock screen that enables you to take photos without unlocking the camera. That icon/button does not appear. Do I need to configure something to get the icon to appear?

    Double click your home button when the phone is locked. The camera icon will show up then.

  • Phone app in iOS 8 does not appear in full display.

    Just got brand new iPhone 6, 64 GB. Sometimes when I open my phone app, it appear that the full display of the app has shifted down by quarter of an inch, with the bottom quarter inch "cut off" and the top quarter inch empty black. See the 2 screen shots I took below. The issue seems to continue even after I re-start the app. After closing and re-opening the app a few times, the screen eventually "shifts" back into normal position.
    Anyone else having this issue? Haven't noticed this issue in other apps yet. If you ask me, this seems like a lousy software bug.
    Below are the actual screen capture. In the first one, note the top black band. And in both the screen captures below, in the bottom, all the icons are "cut-off".

    You can try resetting your iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.

  • PP module: I reversed my settlement but now raw material does not appear

    Hi all,
    I did a small mistake in setting up MRP for finished goods therefore my amount came different. I got the message to see the log but as i could not locate the log and went ahead and completed the settlement.
    Then I found out the mistake and correted the same. But I had already made settlement, therefore I reversed my settlement.
    Now when I am doing>>> Logistics u21D2 Production u21D2 MRP u21D2 Planning u21D2 Single Item, Multi-Level....I can see only finished goods and raw material disappeared. Therefore I can not proceed and do my settlement.
    can somebody help me on this?
    regards,
    Supriya
    Edited by: Supriya Naik on Mar 3, 2011 10:19 AM

    To be precise...thats how my PP module is.......I need to do SD module but can not proceed because of this mess up...but it is making me learn a lot!!
    I would really appreciate your help.
    regards,
    Supriya
    Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Materials Management u21D2 Consumption-Based Planning u21D2 Plant Parameters u21D2 Carry Out Overall Maintenance of Plant Parameters
    Activate MRP:  Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Materials Management u21D2 Consumption-Based Planning u21D2 Planning u21D2 Activate Material Requirements Planning
    Create production sch profile: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Master Data u21D2 Define production scheduling profile
    Create prodn scheduler: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Master Data u21D2 Define production scheduler
    Control parameter for MRP: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Material Requirements Planning u21D2 Plant Parameters u21D2 Carry Out Overall Maintenance of Plant Parameters
    Assign availability check to order type: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Operations u21D2 Availability Check u21D2 Define Checking Control
    Define control perameters: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Operations u21D2 Scheduling u21D2 Define Scheduling Parameters for Production Orders
    define control parameters- Order Type: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Master Data u21D2 Order u21D2 Define order type-dependent parameters
    create confirmaton parameters: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Operations u21D2 Confirmation u21D2 Define Confirmation Parameters
    define valuation of goods received: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Integration u21D2 Define Valuation of Goods Received
    MMR1- Created material
    MMH1- MRP view fo trading goods
    MMF1- MRP view for finished oods
    MD02- Run MRP
    CS01- Create BOM
    KL01- Create activity type labor
    KP26- set activity prices
    Work Center person responsible: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Basic Data u21D2 Work Center u21D2 General Data u21D2 Determine person responsible
    Create work center location: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Enterprise Structure u21D2 Definition u21D2 Logistics u2013 General u21D2 Define Location
    create work center controll keys: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Basic Data u21D2 Work Center u21D2 Routing Data u21D2 Define control key
    CR11- Create activity
    CR01-work center for finished goods
    CA01- created routing for finished product
    case
    MD02- Run MRP (got error- error calculating costs- see log....but wrongly saved)
    MD04- conversion planned order to production order
    MB1A- Gods Issue- 261- consumption for order from warehouse
    CO15- completion confirmation of production
    MB31-Goods receipt
    KO88-Settle Cost of production order

  • My service provider's SMTP does not require a password but the option "non" does not appear on the IPOD Touch 5th gen. Fix?

    I have relay.skynet.be as my outgoing server and it does not require/allow password protection. When configuring mail on the Ipod the option of "non" is not given for the outgoing server. Is this a skynet issue or is there an Ipod solution?

    Google for:
    setup XX email on iphone
    to see if ony of the returned sites help.
    XX is you email provider.

Maybe you are looking for