Pix240 ProRes timecode isn't recognized by Premiere

I'm on the latest version of Premiere CC. We just shot a ton of media with the Pix240. The files are ProRes HQ 1080 23.98. In quicktime 7 I can see the timecode just fine. In premiere every clip starts at 00:00:00:00. If I get the properties of the clip in Premiere I can see the start timecode listed correctly. We need to send files to other software and relink to R3D Media using the timecode. Is there any way to get it working in Premiere again?

[Copied from duplicate thread.]
I'm trying to track down what may be a bug in Premiere Pro 7.2.2.
Exact system details will be added tomorrow when I'm in front of my work machine. OS 10.8.5, Premiere 7.2.2, AJA Kona 3G.
I have 23.98 ProRes 422 footage from an outside post house. They're from a PIX recorder. I am trying to track down the exact model.
Ppro CC (7.2.2) reads this specific set of Qts as starting with "0" timecode. They are in fact time of day (various 10-11-12 hour time codes.)
The preference "Timecode: Use Media Source" is set correctly. (I even tried reversing it just in case).
Ppro CS6 reads them correctly. Final Cut 7 even reads them correctly. Exporting an XML from FCP, in which all TC is correct and matches perfectly (genlocked) results in not only 0 hour TC for each clip in Premiere, but up to 20 second offsets.
I opened The FCP XML in CS6 on my laptop, looked correct. Saved the CS6 project, opened that in 7.2.2 and got the same 0 hour TC and severely mis-aligned multi cam source sequences.
I have a workaround, I'll just run with the incorrect timecode for this one-off project. This will be a real problem, however, down the road.
Anyone else experience this? I found the following 2 threads on Adobe and one from Seth Goldin:
https://forums.adobe.com/thread/1490788
https://forums.adobe.com/message/6365626#6365626
http://sethgoldin.tumblr.com/post/85288214255/premiere-pro-7-2-2-does-not-properly-read-ti me-code
Any insight would be very helpful.
Thanks,
Dan

Similar Messages

720p 120fps clip from GoPro Hero3 Black not recogniced by Premiere Pro CS6

Hello. My clip from Hero3 Black Gopro isn't recognized as a 120fps clip. I've read people saying that this is normal because premiere pro won't recognize them for anyone.. But it does, look at this clip:
http://youtu.be/YeHCUNH4KcM
At around second 30 it shows how it recognizes that the file is actually 120fps, in that same screen, I get that the file is 59,94fps and not 120fps and it really is.
What am I doing wrong?
Thank you.

I've created a few sample files for anyone interested. These files are straight from the camera.
Here is a 1280 x 720 at 60 fps: https://dl.dropbox.com/u/92935787/1280x720%2059fps.MP4
Here is a 1280 x 720 at 120 fps: https://dl.dropbox.com/u/92935787/1280x720%20119fps.MP4
Here is a 1280 x 960 at 100 fps: https://dl.dropbox.com/u/92935787/1280x960%20100fps.MP4
Import these into Premiere Pro CS6 or even Media Encoder CS6 or After Effects, have a look at the metadata and both of the 720p videos will show up as 60 (59.94) fps. I tried this in Premiere Pro CS5 and had the same result.

Ipod isn't recognized by itunes and computer but it still charges

i've tried a hard reset but that didn't do anything.
when i plug it into my computer i get a message saying that the USB device isn't recognized.
so, when i look at it in device manager the ipod shows up as a unknown device
and the device status says "there are no drivers installed for this device".
anybody know what to do?

Your iPod's battery may not be charged. Plug your iPod in, wait for a moment, press a button to turn it on, and check the screen. Here are some easy steps to get the most out of your battery. Note: On recent iPod models, when the battery is completely empty, your computer may not recognize your iPod for up to 30 minutes even though it's connected and charging.

I reset my apple ID password here on the website, but my computer isn't recognizing my new password. what should I do? I just need to update my adobe flash player but it keeps asking me for my password but won't take my new password I just updated.

Model Name: iMac
Model Identifier: iMac12,1
Processor Name: Intel Core i5
I reset my apple ID password here on the website, but my computer isn't recognizing my new password. what should I do? I just need to update my adobe flash player but it keeps asking me for my password but won't take my new password I just updated.

"If you've forgotten the Apple ID password how did you log in to make the last post?"
Exactly! The password I used to log on here and write my post I figured was the same Apple ID password I would use to reset my computer login password. But my computer isn't recognizing it as the correct password so it wont let me update my login password. I have 2 user accounts on my computer.
As far as the link you provided, I already looked to that for help earlier. It states:
Choose Apple menu > System Preferences, click Users & Groups, click the lock to unlock it, then provide an administrator name and password. Select a user, then click Reset Password.
I did these steps, but I don't remember my admin password. The question is: How do I reset my admin password so I can reset my log in password.
Is my admin password the same password I use to log onto this website to post questions? If so, like I said previously, I already reset that password and my computer isnt recognizing it.

I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

You will need to use third-party software to transfer music from your phone to the iTunes Library. I recommend Phone to Mac - Pod to Mac | Macroplant.com.

I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

For Windows see http://support.apple.com/kb/TS1538
For Mac OS X see http://support.apple.com/kb/TS1591

I restored my macbook and now my ipod isn't recognized by itunes

I restored my macbook and now my ipod classic isn't recognized by Itunes... Help

Have you worked through each and every single suggestion in this Apple support document yet? If not it would be a good place to start.
iPod not recognized in iTunes and Mac desktop
B-rock

My 5th generation iPOD isn't recognized by iTunes?

When I plug my iPod into my computer, iTunes opens, but my iPod isn't recognized. Anyone else have this problem or any suggestions?

By all of those suggestions, do you mean the ones I mentioned in the paragraph about or the ones in the support article I linked? Does this 5G iPod via still power on? DId you try connecting it to another PC or Mac to see if it is recognized there? Did you check the dock connector for any signs of debris or damage to the pins that could be preventing a connection to your PC?
Any idea how long the average iPod should last? Ours if from 2006.
Most people never get the iPod to last 6 years, so consider yourself lucky. That's quite a time span!
B-rock

HT1353 2nd gen iPod isn't recognized by iTunes nor Windows - What to do?

I have an iPod A 1019 (2nd gen?). When I connect it to the firewire connector on my PC, the unit screen shows a checkmark and "OK to disconnect." I tried to reset with Menu + Select (=nothing happened) but Menu + Play works. Still, PC + iTunes won't recognize iPod. Help? I suspect that the software on the iPod itself is too old but since the device cannot be discovered, I can't update it. I tried iPod transfer software, but nothing recognizes my oldie. Sigh.

Hi, Griff W.!
Thanks for taking the time to offer me the troubleshooting steps. I tried them all, but unfortunately to no avail. I can listen to the iPod, but once I connect it to my PC with the firewire cable, it still isn't recognized in iTunes or in Windows. I checked the Universal Serial Bus controllers. The iPod is nowhere to be seen. I checked the version of the software on the iPod and it's 1.5. Maybe that's the problem: the software is too old?
BTW, the firewire cable is charging the iPod.
Maybe if I could find someone with an old PC that has a firewire port? But even if I were to make the iPod visible, would I be able to copy the songs onto my new iPod? From what I've been reading probably not. It's really exasperating. They music is legit, copied from my CDs or purchased.
I am looking at my new superslim iPod Touch 5th generation and right next to it the clickwheel iPod 2nd generation that's more than a cigarette pack sized. Progress. I guess.
Thanks for helping out. If you have any more ideas, please let me know.
Best regards,
D.

Ipod 5th Gen 60gig isn't recognized by Windows XP

Hi,
My 60 gig 5th gen Ipod isn't recognized at all by my PC. I tried different usb ports already, and in all of them when i connect the Ipod the PC just makes the typical sound when coneenecting any usb device and after that it doesn't shows the ipod neither in iTunes neither in My Computer but in the iPod screen appears te forbidden sign with the message "do not disconnect" and the ipod normally charges.
See ya.

See if any of these articles help.
Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.

Lumia 1020 isn't recognized by Windows 8.1

I just installed Windows 8.1 and when I plug in my Lumia 1020, it isn't recognized. In Device Manager it shows up under "Other Devices" as "Nokia Lumia 909 (RM-877)". I understand that the 909 and the 1020 are the same so no mystery there. When I right click and tell it to update the drivers, it says that there are no drivers available.
I read in another thread where someone was having a similar problem and powering off the phone and then reconnecting it via the USB cable seemed to cause it to be recognized. I am not having any success doing that. I have gone through the steps listed by Microsoft also without any luck.
I also have a laptop running Windows 7 and my phone is recognized by that computer without any trouble at all. So, I don't *think* it is a hardware problem.
I went so far as to re-install my OS. I patched it, updated the BIOS and didn't connect or install anything else (besides the patches) before connecting my 1020. Once I hooked up my 1020, still nothing. Can't update drivers from the internet or from the downloaded drivers.
What is going on?
Thanks in advance for any help!

drives64bits wrote:
I can´t conect
Look at other devices that are not loaded correctly. Not the USB
If your operating system did not come with Windows Media Player, install the Media Feature Pack for your version of the operating system.
http://windows.microsoft.com/en-US/windows/download-windows-media-player
Use the USB cable that came with the phone.
Connect the phone to the PC. Turn it all the way off, hold power button and slide the screen down. The phone will turn back on and it will be detected, drivers should load.
You should see it in windows explorer. It should install in 'portable devices' in the device manager.

My ipod isn't recognized by any computer & itunes, and desplays a sad face.

i have had my ipod mini for eleven months and this is the first problem i have had with it.
i went on a vacation to flordia, and while i was there my ipod crashed. i had dropped it once a few days before the crash, but it continued to play my music after i dropped it.
when i go to turn it on the apple logo appears, then the depressed ipod.
my ipod isn't recognized by any computer or tunes. when i plug it into my computer, the 'do not disconnect' screen doesn't even appear. all that happens is the apple logo screen, then the depressed ipod screen, then a recharging screen appears that is stuck on the lowest point possible.
i have already tried the "five R's" and everything else in the support pages, and so far they have helped me none. all they do is bring you around in huge circles, and you end up on the page you started on.
i run a windows xp, and have everything fully upgraded.
i know, i know, many of you are having similar problems, but could you please only post if you have an answer, thanks.
-xb
Windows XP

I know!!! It worked just fine one day, computer recognized it and i could add or remove songs at me leisure, but now I can't even charge it on a computer becasue it doesn't exsist to it. I also tried the five steps, but you can't restore the settings on it if the computer can't find it. Finally I had my sister bending the charge piece in the ipod just for it to show up, I restored it and it didn't make a bit of difference! I lost all 800 songs on it but I still can't charge it or add songs. If you find anything out, let me know!!!

5th gen Video 30G isn't recognized by windows XP help!

I have a 30G video with the stock USB that has never had an issue until recently when i got the new iT7. The problem is that the iPod isn't recognized by my computer at all. when i connect it it brights up for two seconds as if i woke it up and then the light shuts off. it's still on but its not recognized. Neither iT or my computer. does anyone have anything to say about this or is having the same problems?
Windows XP

New IPOD. Downloaded SW from web. iT7. Neither computer nor iT will consistently recognize ipod. backlight flashes on and off intermitently, and apparently randomly, when connected. Has "do not disconnect" message most of the time. Reset lasts 1-2 seconds. Need to shut computer down and then go thru ipod reset dance to disconnect and do 5 "R"s again (and again). Could it be a factory bad cable??
Surely not! And..where the heck would I get another to test with...oh, buy one, no doubt? I see a lot of other folks with the same problem. Apple, are you listening?
Jobs, get it done! Anyway, been thru a lot of complaints here and as it says above, problem is NOT resolved.

My ipod nano isn't recognized on my computer and I can not add the new music I bought on itunes. Please help

My ipod nano isn't recognized on my computer any more. I bought new music and i can't get it to my ipod. I also bought a shuffle and the same thing happened.

iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Ipod Shuffle won't turn on or charge and isn't recognized by the computer

My Ipod shuffle won't charge and isn't recognized by the computer , it turned orange than stopped and won't charge or turn on since. Does anybody has a solution please ?

I have exactly the same problem with both my ipod shuffles. That suggests to me that it is a problem with the ipods rather than my PC or computer software. I'm surprised that no Apple tech has suggested a solution yet.

Pix240 ProRes timecode isn't recognized by Premiere

Similar Messages

Maybe you are looking for