PIX525 migrate to ASA5545-X

Hi ,
Please some advice and help.
I have a ha pair of PIX525 with 7.0(4) and prepare for migrating to ASA5545-X with version 9.x
It seems that a PIX to ASA setup tool is available in download center but i am wondering if it can properly work for 7.0(4) to 9.x?
Can someone give the right answer about this?
if the migration tool can’t suitable for 7.0(4) to 9.x, it there any suggesting version to migrating configuration automatically to 9.x smooth
Manually configuring is the last way i have considered because more than 400 NAT rules transferring to object NAT format is really annoying :(

Hello,
This is a critical migration as lot of stuff has been changed.
I recommend do it manually as much as possible but otherwise you would have to copy the config to an ASA running 8.2 and do it automatically but of course a lot of things might get broken so you have to get a specialist for this.
I created a post about what to do in my blog.
http://www.laguiadelnetworking.com/asa-8-3-upgrade-new-features-known-issues-best-practicesetc/
Regards,
Jcarvaja
CCIE 42930, 2xCCNP, JNCIS-SEC
For inmediate support http://iNetworks.cr

Similar Messages

Config migration from ASA5540 to an ASA5545-X?

Just a quick question that I want to confirm.
Customer has a ASA5540 at their main location and need a new ASA5500 for a DR site.
Can I simply take a config file from an ASA5540 and easily drop it on an ASA5545-X or what ever?
They are going to be using it as a VPN concentrator primarily.
Or are there going to be issues since the 5540 is running 8.4(5) and the 5545-X?
Or if they upgrade to 9,0(1) or higher, then they should be the same?
Thanks.

Richard,
Felipe is correct regarding the syntax compatibility. 5500-X models will most likely be shipped with 8.6. (A couple I unboxed in the last two months had that.) 8.6 releases were specific to -X series (8.5 for ASA services module and 8.4 for classic 5500 series).
Personally I like standardization and would just put them all on 9.0(1) software - even though it's not a requirement for interoperability and configuration compatibility. 9.1 adds no features or bug fixes to the base system - only adds support for CX (with the required SSD also having to be added) - so I've not been loading that.
Remember that if you are exporting VPN configurations that the pre-shared keys (if you're using PSKs on your VPNs) are not included by default. You need to backup using "more system:running-config" (after a "term pager 0") or similar such approach.

How can I Migrate/Split itunes/icloud account for a large family now that they have family sharing

Ok, now that Apple has finally come out with family sharing I need to get things sorted out and I think it is going to be a mess. I have 6 family members (my spouse and 4 children) all sharing/using one itunes account. For parental reasons this made perfect sense. Now with the the advent of family sharing and such we have alot of sorting and migrating to do and I am very unsure how to go about it. Here is what we have.
Myself - I have a 64GB iPad 3 and a 64GB iPhone 5
Spouse - 64GB iPhone 5
Children - x4 16GB iPhone 5C (pink, blue, green, and a yellow)
We have had one itunes account now for several years, we used to have x4 16GB iphone 4's and a 16GB iPod touch 4 so we needed it to be shared at the time. We all have different Game Center ID's and Facetime/iMessages are all setup to the phone numbers (aside from mine which also uses the itunes e-mail). We currently have 1 upgraded icloud account with 200GB of storage on it (love the new tiers). So here are the questions.
1) How do I go about using and isolating all the devices so they can all use the iCloud storage? Right now if I try and setup backups by device under the what to backup there is no simple "Full Backup" option, they have all the categories separated. I cannot backup my daughters contacts without forcing a merging of them and so on. Same thing with Documents and Data. Would I need to setup a different iCloud account for each device now?
2) iTunes Music/App purchases. Now that they have a family sharing function I am assuming it would be a good time to separate all the devices (aside from my personal iPad/iPhone). If I understand correctly we need to setup a new itunes account for each and link them with family sharing, does this then allow us to disperse/move items from a singular to the multiple account (at least a one time option to move around) or would it simply be shared off the original account? My daughter for example will be 18 next summer and as such no longer under our care. How do we move her items to her account? She has a lot of purchased Music. Now keep in mind I am talking about an account for someone who was 12 when she had her first device and as such needed to be under her parents.
I just want to state that repurchasing things is NOT an option, and to be frank, according to Canadian laws pertaining to *licensing* we actually own the product if we paid for it and have the right to transfer the ownership thereof. This issue went through the courts regarding used copies of OEM editions of Microsoft Windows several years ago and they closed the legal *license* vs ownership separation.

Go to appleid.apple.com to manage the ID, sign in and select to the Name, ID and Email Addresses section, then change the birth date on the bottom right. At the present time you may not be able to enter the correct birth date, but others have had success changing the year to 2000, or the date to 1/1/2001, both of which will have child ID status.

AR Open/Closed Invoices Migration Help

Hello Experts,
We have a data migration requirement for AR invoices from a legacy system to Oracle.
We have both open and closed invoices. Can anyone of you help in giving the steps to be followed? This is for India AR Invoices. Expecting a quick response and it would be of great help to us! This is in 11.5.10
Thanks,
Janani Sekar
Edited by: user11981778 on 20-Dec-2012 20:32

Hi,
Pl. populate the following open interfaces from your legacy data and then run the 'Autoinvoice Master Program'
(1) RA_INTERFACE_LINES_ALL
(2) ra_interface_distributions_all
For open invoices the AR_PAYMENT_SCHEDULES_ALL.STATUS sholuld be equal to 'OP' .
Pl. visit following link also for more info.
http://bhaskarreddyapps.blogspot.in/2011/10/ar-invoice-interface.html
HTH
Sanjay

Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

Hi Experts,
             I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
           I'll get all the required data with field in an excel file.
             Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti Shankar

Hi
If you are checking for CREATE option then Sales Doc Type
For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
That will show the MANDATORY parameters...
Reward if helpful....
Message was edited by:
        Enter the Dragon

Migrating open POs and GR/IR clearing account balance

Hello gurus,
I've got the following problem concerning migration of open POs:
For example: In my source system there is a PO for 10 pcs. of some material. There has been a goods receipt for 5 pcs. (200$ each).
Now, when I import this order and the corresponding purchase order history into my target system (using LSMW), the target system creates the order, a material document for 5 pcs. and an account document.
But of course, our FI-team also has to migrate the balance of the 'old' GR/IR clearing account.
So, the balance in the source system is <> 0 (e.g. 1000$), because the 5 pcs. have been delivered but there has been no invoice receipt yet.
This balance is imported into the new system and then the open orders are migrated, generating an account document and thus, the balance is 2000$ afterwards.
This obviously is not correct, so I am sure that I am missing something, just what?
Thanks
Alicia

Hi,
1. There will be an open PO uploaded for 5 qty and price 200$ each
2. Opening Balance of Material - 5 qty and corresponding value to Stock A/c - 1000$
3. Also there will be Vendor Balances uploaded in the system as 1000$ against the invoice. (If the invoice is still expected then chec with FI Users if they can get invoice form vendor)
if no then do not upload initial stock entry of step2, create a PO of 10 qty and then do GR in system (SAP).

[Migrating from 6i to 11G] HTML viewer

Hi,
There used to be a program to display the output of a report in 6i. When the report was displayed, it used page breaks (ESC characters) to allow the user to view the next page and print a range of pages from a report.
In 11G, these control characters are not interpreted by Internet Explorer:
>
height 85
width 94
before report esc "&l%%0O" esc "&l8D" esc "(s12H"
after report esc "E"
after page control(L)
[End Quote]
So how could I migrate the printer definition files in order to get after page control in 11G?
Many thanks for your help.

As my old college profession used to say - "The only stupid question is the one that doesn't get asked!" Forms 11g only supports web deployment. This means you will need the OAS with the Forms and Reports Services installed as well. Typically, the setup is three tiered ( 1 server = Database, 1 server = Application Server, 1 server = Infrastructure server ). You don't have to set up the technology stack multitiered - all three could reside on the same server or you could have the all three on the same machine but is not recommended. I would at least have the database on a server seperate from OAS.
Here are a few links to get you started.
Oracle Documentation
* Check out: Development Tools - Oracle Forms, Middleware - Applications Server - Oracle Fusion Middleware 11g and Middleware - Data Warehousing and Business Intelligence - Oracle Reports
Since you will be upgrading from Forms 6i to 11g, be sure to visit the Oracle Forms-Upgrading Forms 6i to Forms 11g documentation.
BTW, welcome to the forums!
Craig
If a response is helpful or correct, please mark it accordingly.
Edited by: CraigB on May 6, 2010 2:09 PM

How can I migrate everything from one account to another on same computer?

How can I migrate everything from one account to another on same computer?

Transferring files from one User Account to another

TS3981 After migration files are now shared between two user accounts. How can I combine them into one account?

After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?

See Pondini's Transferring files from one User Account to another, for starters

Duplicate user account OR migrate iPhoto/iWeb between users

I've seen this question asked several times before, but have not seen an answer!
So, with as many details as I can muster:
I have, on my computer, 4 user accounts: my admin account, my user account, my boyfriend's user account, and our business account... All separate, keeps things nice and tidy (sort of!).
I have a new and separate project that I'm starting to work on which involves lots of images, and new websites, and new and different stuff that's necessary for the project, but just clutter in any of the other accounts.
Because this project started out as something my man wanted to play around with, all of the beginnings of this are in his iPhoto and his iWeb, and they're well organized. I've not had luck so far moving the iPhoto and iWeb libraries to a new/blank user and maintaining the organization that I've spent time and attention making right.
He's not so great with technology, and gets very frustrated (and unproductive!) when anything on the computer doesn't work exactly like he expects it to. (When Lion came out and the scrolling went "the wrong direction" he was afraid to use the computer at all for a week, because "everything changed, I don't even know how to use it anymore" that's between us though, personal issure ). So I'd like to keep the user experience the same for him. I'd like to duplicate his settings, preferences, etc. into a new user for him, and take over his current account to isolate this project.
So, in summary:
I want to create a new account with the same user experience as a current account without having to find and reset all of his settings.
OR
I want an exact copy of the iPhoto and iWeb from this user account to another one, on the same machine.
I am currently running OSX 10.7.2, iPhoto '11 9.2.1 and iWeb 3.0.4
Thanks in advance for any help!

Kenzishly wrote:
I want to create a new account with the same user experience as a current account without having to find and reset all of his settings.
That's easy, if you have Time Machine or "bootable clone" backups. (If you don't, you should anyway. Post back if you need info on them.)
Use Migration Assistant to transfer just that user account from the backups; it will put up a screen saying it can't transfer it under the same name as the existing account, and allowing you to rename it.
Other than having a different name, the transferred account will be identical to the existing one. Then you can modifiy them separately as necessary.
EDIT: see Using Migration Assistant on Lion for detailed instructions. Be sure to un-check the boxes for eveything except that one user account.
Message was edited by: Pondini

How can I create a new behance account and migrate the content of the old behance account into the new one?

I can't change the url of my old behance account so I need to start afresh with a new behance account... how can i migrate all content from the old url into the new one? thanks

If you have a login questions - please contact Behance support directly. Behance is transitioning all logins to Adobe IDs this Spring 2014. If you signed up for Behance post April 10, 2014, your Behance login matches your Adobe ID exactly. If you signed up before this and are having trouble logging in, visit this section for more help, or contact Behance support. Please do not comment on this forum with login questions, as we're able to provide much faster, one-on-one support elsewhere.

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

How do I find a photo file in the Finder + future migration question

Being a recent Mac convert, I am just getting used to the 'complete control' approach to photo management that iPhoto has. I'm used to knowing where my photos physically reside on my computer - this is useful for doing things like uploading photos to a website for example. How do I actually find a particular photo in the Finder (or even give photo files recognisable names, as opposed to whatever automated naming system iPhoto uses)?
A followup question to this is, what happens if I ever want to migrate my photos out of iPhoto one day to another application or even back to a PC (God forbid - just my paranoia about being forced to use a particular system forever kicking in here!) - is there a way to do this, and keep photo modifications etc? Or once I start using iPhoto, have I made my decision for life??
My apologies if this has been asked before, I couldn't find anything in the forum when searching.

poddster
I hope you've a notebook and pen, but you've asked a lot of questions:
I'm used to knowing where my photos physically reside on my computer
You photos are stored in the iPhoto Library at your Pictures Folder. This is a Unix style Package Folder that very easy to see inside: right click on it and choose show package contents. A finder window opens with the library exposed.
Here's how the library is laid out:
In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
Originals are the photos as they were downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
iPhoto always preserves the original file, all operations are carried out on a copy.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
And here's a warning: It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss.
this is useful for doing things like uploading photos to a website for example
No it's not. Don't surf the iPhoto Library. The idea with iPhoto is that you do everything via the iPhoto Window or media browsers:
So, to access pics use one (or more) of the following:
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
iPhot doesn't name the files, those names are given by your camera. You can add titles in iPhoto and if you use the File -> Export command there's a facility there to name the resulting file (it'll be a copy - remember what I said about all operation being done on a copy...) with the title.
Do not rename files in iPhoto, That comes under the heading of making changes in the iPhoto Library Folder and alters the path to the files. If you do, iPhoto will lose track of the file. But the truth is there's simply no need to. However, you can rename the files before importing them if you like.
Migrating is really easy. You've seen the layout of the Library above. The originals are all there, in the originals folder, the Modified versions in their folder. If you want to have only the most recent versions of pics, then export them from iPhoto to a folder on the desktop.
By all means post back if you need more.
Regards
TD

I would like to combine multiple profiles into a new computer. Which are the most important folder or files to migrate?

The user profile in my old computer somehow became corrupted and I can no longer access it to log on. Unfortunately I was not aware of the Firefox sync feature at the time. I used a new profile and had to start from scratch to save new bookmarks and extensions/plugins. I did set up Firefox sync for this new profile. Now I have a brand new computer and desire to migrate the bookmarks to this new computer, including the original bookmarks in the old computer, as well as the bookmarks in the second profile. While I have located the profiles folder for each profile in my old computer (as well as extensions and plugin folders), the content of this folder is daunting. I would like to know which are the minimal folders I should select to migrate and would it be safe to simply copy and paste over the entire folder? Please note that I have also added new bookmarks into my new computer which I would not like erased. I hope these details are not convoluted.

Firefox has two methods of bringing in bookmarks from another Firefox profile:
* Restore a backup (JSON files in the bookmarkbackups folder): this completely replaces what you have, so is not the first step
* Import from an HTML file: this is additive and will create an Imported Bookmarks folder or add them under Unsorted Bookmarks
Restore is best if you tag your bookmarks because the JSON format preserves tags. If tags are not important, then it's easier.
What I suggest is:
(1) Export your current bookmarks to the HTML format; you can reimport these later. See: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]. Open the file in Firefox (it's a web page) to make sure it looks complete before proceed.
Next, get the bookmarkbackups folders from each of your old profiles that you want to restore, and look for the most-complete-looking JSON files (they will have the most recent dates and largest number of bookmarks indicated in the file name). Proceed from the smallest set to the largest, or oldest to newest; basically, restore the most important one last.
(2) Restore a backup, then export to HTML. This article has the steps for a restore: [[Restore bookmarks from backup or move them to another computer]]. Then export to HTML and check for completeness.
(3) Repeat #2 until you get to the last/most important restore. You don't need to export that one.
(4) Import the HTML files you've made throughout the process.
(5) In the Library dialog, reorganize. Firefox doesn't have a deduplicator, but you might find one or more extensions to do the job on the Add-ons site if you find a lot of overlap.
Make sense?

Error while migrating users using CSSImportExportUtility

Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?

I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz

PIX525 migrate to ASA5545-X

Similar Messages

Maybe you are looking for