Pixel Bender Application Error After Install
I just installed eLearning Suite 2 (CS5). All
programs appeared to have successfully installed,
but when I try to launch Pixel Bender from the start
menu, I get the following error and the software
does not open:
sniffer_gpu.exe - Application Error
The instruction at "0x69304c17" referenced memory
at "0x000000c4". The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
Would you please provide more information about your OS and graphics card. Did you install the latest graphics driver for your graphics card?
Similar Messages
-
Application error after installing NW 7.01 Trial version
Hello all together,
i have used the search to find threads with the same issue but there was non thats fits really to my issue.
I have installed the NW 7.01 on a virtual maschine with windows Xp sp2. as I did it before several times.
the installation finished without any problems. then I try to start the applicationserver but a windows popup occurs thats shows the following error "disp+work.exe Application error
the instruction at 0x0042d04a references memory at 0x00001724 the memory could not be written
then I have the possibility to terminate the problem by clicking OK or ok to debug the program.
I have cleaned the registry with the RegistryClean.cmd an deleted everthing and installed the NW 7.01 again. but the same issue occured again.
can somebody help me with this issue.
regards
StefanUninstall minisap installation. Than change computer name lower than 13 chars. My suggestion a simpler name like "minisap" .In most cases Microsoft gives complex computer name like yunus-ax8323akdm . With minisap installation your computer name is host name like PROD QA.After change computer name restart setup and re-install. You will see everything is ok. Sometime you have to start manually database from SAP MMC (console)
[Special Discussion about topic|http://www.ykburda.com/2009/01/how-to-start-dispworkexe-dispatcher/] -
Error after Install SAP NetWeaver 7.01 ABAP Trial Version
Hi Everyone,
I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
Someone could help me?Hello Marques Polastri ,
->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
Try to connect to the database NSP & let us know the results.
-> Please update with output of the following commands:
dbmcli db_enum
dbmcli -d NSP -u <control>,<pwd> db_state
Thank you and best regards, Natalia Khlopina -
Pixel Bender Gallery Error in Photoshop CS4 Student Edition
When trying to access pixel bender filters with Photoshop CS4, filters>Pixel Bender>Pixel Bender Gallery, I get an Error dialog images as follows...
I have read the ReadMe file and have the GeForce 8500 GT Video Card on this list.
The Pixel Bender Toolkit is installed at C:\Program Files\Adobe\Adobe Utilities\Pixel Bender Toolkit c/w pbk filters that run in the toolkit.
In Photoshop there are a number of pbk filters in C:\Program Files\Adobe\Adobe Photoshop CS4\Pixel Bender Files.
The Operating system for the computer is Windows XP Professional c/w service pack 2 at least.
My question is... why am I getting this error message and how can It be fixed?Here are two further images and an NVIDIA System Information report you asked for that I have prepared, I hope this will help.
I am aware that I could download trial versions of Photoshop CS5 and its Pixel plugin version, but first, this first image shows a message that loads from Photoshop CS4 when I start the program and has always done so from day one of owning the machine and the software, could this be of relevence to what could be the root of the issue at hand.
I also use 3D Studio Max with OpenGL and have noted rotating moving objects in 3D space of a file size of 10MB is very slow and chuggie, is this relevent, does this information give any clues.
Thankyou again for your time and effort in helping me resolve Pixel Bender Gallery Error issue.
NVIDIA System Information report created on: 31/06/2011 00:50:53
System name: Not provided.
[Display]
Operating System: Microsoft Windows XP, 32-bit (Service Pack 3)
DirectX version: 9.0
GPU processor: GeForce 8500 GT
Driver version: 275.33
DirectX support: 10
CUDA Cores: 16
Core clock: 459 MHz
Shader clock: 918 MHz
Memory clock: 400 MHz (800 MHz data rate)
Memory interface: 128-bit
Memory: 512 MB
Memory type: DDR2
Video BIOS version: 60.86.34.00.13
IRQ: 18
Bus: PCI Express x16
[Components]
easyUpdatusAPIU.DLL 1.3.5.0 NVIDIA Update Components
WLMerger.exe 1.3.5.0 NVIDIA Update Components
Nvlhr.exe 1.3.5.0 NVIDIA Update Components
daemonu.exe 1.3.5.0 NVIDIA Update Components
ComUpdatusPS.dll 1.3.5.0 NVIDIA Update Components
ComUpdatus.exe 1.3.5.0 NVIDIA Update Components
NvUpdtr.dll 1.3.5.0 NVIDIA Update Components
NvUpdt.dll 1.3.5.0 NVIDIA Update Components
NVCPL.DLL 6.14.12.7533 NVIDIA Compatible Windows 2000 Display driver, Version 275.33
nvCplUIR.dll 2.8.254.08 NVIDIA Control Panel
nvCplUI.exe 3.7.730.01 NVIDIA Control Panel
nvWSSR.dll 6.14.11.9562 NVIDIA Workstation Server
nvWSS.dll 6.14.12.7533 NVIDIA Workstation Server
nvViTvSR.dll 6.14.11.9562 NVIDIA Video Server
nvViTvS.dll 6.14.12.7533 NVIDIA Video Server
nvMoblSR.dll 6.14.11.9562 NVIDIA Mobile Server
nvMoblS.dll 6.14.12.7533 NVIDIA Mobile Server
nvDispSR.dll 6.14.11.9562 NVIDIA Display Server
NVMCTRAY.DLL 6.14.12.7533 NVIDIA Media Center Library
NVOGLNT.DLL 6.14.12.7533 NVIDIA Compatible OpenGL ICD
nvDispS.dll 6.14.12.7533 NVIDIA Display Server
NV4_MINI.SYS 6.14.12.7533 NVIDIA Windows XP Miniport Driver, Version 275.33
NV4_DISP.DLL 6.14.12.7533 NVIDIA Windows XP Display driver, Version 275.33
PhysX 09.10.0514 NVIDIA PhysX
NVCUDA.DLL 6.14.12.7533 NVIDIA CUDA 4.0.1 driver
nvGameSR.dll 6.14.11.9562 NVIDIA 3D Settings Server
nvGameS.dll 6.14.12.7533 NVIDIA 3D Settings Server -
Hi,
I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
=========================
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
appr60ue.LIST
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Unable to get the objects for module "APPR60UE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
=========================================
Has anyone faced something similar in the past?
Regards,
NeerajHi Helios,
That got resolved after I added the location of the dll in the PATH.
Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
The log looks like:
Relinking module 'fndcpesr.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe
-MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
gnumake: ***
[D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
Relink of module "fndcpesr.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Regards,
Neeraj -
Please Help Me, Windows Form Error After Install
help me to fixed this errors after install visual basic
Instances of this error (1)
1.
Hide Call Stack
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse..ctor(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse.GetUniverse(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkProvider..ctor(IVsDesignTimeAssemblyResolution assemblyResolution, IDesignTimeAssemblyLoader assemblyLoader, TypeDescriptionProvider parentProvider, IVsSmartOpenScope openScope)
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.get_TargetFrameworkProvider()
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.GetProvider(Type type)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.System.ComponentModel.Design.Serialization.IDesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.TypeCodeDomSerializer.Deserialize(IDesignerSerializationManager manager, CodeTypeDeclaration declaration)
at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager manager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager serializationManager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.DeferredLoadHandler.Microsoft.VisualStudio.TextManager.Interop.IVsTextBufferDataEvents.OnLoadCompleted(Int32 fReload)Hello,
I am afraid that I could not get any error message form that list you shared, is there any other message about that error?
To narrow down this issue, I would recommend you check the following suggestions.
1. Rebuild your project and debut it to see whether it could work.
2. If #1 works fine, then publish it and install that application to check whether there is any issue while installing.
3. If #2 works too, then you could share the screenshot and the detailed error message with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and installing again - nothing change.Hi slawek,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena -
First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longerhave access to network settings
Unfortunately, it says I can't delete anything without the missing password.
-
Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
eth0 Link encap:Ethernet HWaddr 00:15:17:F7:81:53
inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
Memory:dfcc0000-dfce0000
eth1 Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
Interrupt:169 Memory:dfbf0000-dfc00000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/AThis looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf -
Getting error after installing admt 3.2
hi team
i am getting error after installing the admt 3.2 on server 2008 R2 where i have installed sql server 2008 sp1 with express edition
the server is a DC
the error is "Unable to check for failed actions. :DBManager.IManageDB.1 Unable to retrieve the database file pagth from the registry. the system cannot find the file specified"
Thanks,
virajYou should change the forum type on this to a question. The way you have this labled as a discussion not a problem.
See if the link below helps you out.
http://support.microsoft.com/kb/2266373
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, Vista, 2003, 2000 (Early Achiever), NT4
http://www.pbbergs.com Twitter @pbbergs
http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup. This posting is provided "AS IS" with no warranties, and confers no rights. -
My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop
Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?*Moved to Android development*
Hopefully you can get some help here.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Getting a reistry error after installing telling me to reinstall itunes
I am getting a registry error after installing iTunes and tells me that the drivers and data associated with importing CDS or Burning CDs cannot be recoginized and to reinstall Itunes... I have done this about five times now and have removed my computer of all traces of iTunes and am still getting this error. if someone could help it would be greatly apperciated.
Thanks,I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
HP4501e "print spooler off" error after installing printer update
Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?
Loralee,
?? I am sorry the computer is not working. I don't work for HP and cannot comment on lawsuits or other calamities.
If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
If you are using a Notebook:
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
This does not fix severe Operating System errors -- it is just a device reset. It can fix minor problems that updates sometimes cause.
============================================================================
I am sorry you are having so much trouble.
Other help:
HP Mobile Printing
You can call HP for help --
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Happy New Year, Loralee! I know it seems to be getting off to a rocky start!
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur -
I get a 213.10 error after installing Captivate
Why do I get a 213.10 error after installing Captivate 7 on a Windows 7 32 bit workstation?
These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time? -
Read/Write errors after installing SSHD
After installing a Seagate Thin 500GB SSHD into my Late 2008 MacBook Pro, I would get errors after my computer had been asleep for several hours. The error codes end with -50. I thought that limiting the speed of the drive with a jumper would work, but it hasn't.
This is from the Toshiba knowledge base : http://forums.toshiba.com/t5/Computer-Troubleshooting/Errors-after-installing-new-advanced-format-ha...
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****
Maybe you are looking for
-
LabView 8 Express Table delete the Right-of-comma positions in the fist row
Hi, how can I delete the zero in the first row of an express table or delete the Right-of-comma positions? Kann ich in einer ExpressTabelle in der ersten Spalte (Zeit) die Nachkommastellen (Nullen) löschen? Thank you Cedric
-
New computer, set up Nano?
I just received a new beautiful computer (thanks, titi!) and i have an ipod nano. Is there anything i need to do to set up this computer to make my ipod work with it? when i plug in my ipod and click "ipod" on the left toolbar thing, i dont see the s
-
10.4.7, PB G4 550MHz, Firewire external peripherals
Hi, I updated from 10.4.6 to 10.4.7 a few days ago and since then no more firewire periphrals are mounted. No external HD, no DV cam, no external DVD-RW. I tested all these peripherals on other PCs and Mac and there are recognized without problems. I
-
JDBC: Error while connecting to MS SQL using JDBC adapter
Hi All, Does anybody know what the error below mean and how to resolve it: - 2007-04-10 14:10:26 PDT: Processing started - 2007-04-10 14:05:57 PDT: Error: Accessing database connection 'jdbc:sqlserver://DBServer:1433;DatabaseName=name' failed: Driver
-
SetLocation does not set the location
Hi, I have just come to a very strange problem. I cloned a JComponent after implementing the Cloneable interface. The second object is moved across a work sheet and then setLocation is called on the first element using the second element's position,