Pixel MG2920 cannon printer

I was wondering if my cannon PIXMA MG2920 was compatable with my  computer  thank you

missvicky wrote:
I was wondering if my cannon PIXMA MG2920 was compatable with my  computer  thank you
Hi,
The following link shows it supports up to current Operating system, that means it should be compatible with your computer. But, what is your computer ? What is its Operating system ?
   http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2920#D...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

    To try to resolve this problem, I have done the following actions.
    1 - I have run Disk Warrior.
    2 - I have repaired permissions.
    3 - I have deleted all plist that are either Cannon or Adobe.
    4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
    I am still unable to print PDF's.
    In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
    In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
    Any help would be greatly appreicated!

    Quit Safari.
    Open the Library folder in your home folder as follows:
    ☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
    ☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
    ~/Library
    Delete the following items from the Library folder:
    Caches/com.apple.Safari/Cache.db
    Preferences/com.apple.quicktime.plugin.preferences.plist
    Preferences/QuickTime Preferences
    Relaunch Safari and test.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

  • How do I make my Cannon Printer MP250work with my new iMac?

    Just bought the iMac, and I need to use my old Cannon printer. Plugged it in and the printer is not responding. Is this a device driver issue, software,etc.?

    I visited Cannon, downloaded the driver/software for PIXMA MP250 but the printer will not respond when I click print.

  • Since installing Firefox, my number pad on my laptop & my Cannon printer don't work

    Acer aspire5742 G
    using Window 7
    Cannon printer MX880 series - whether in wifi mode or plugged in to pc get message printer off line.
    All plug in properly new cartridges put in properly but cartridge lights are shining.
    Thanks Roseskick

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • MG series 5320 Cannon printer, error code 6000 appears, can't get rid of it

    Cannon Printer MG5320, Error code appears, can't get rid of it??  can anyone help

    Hi ikovach10,
    To try and resolve the error, if any object is placed in front of the machine, please remove it.  Next, please open the paper output tray gently, then turn the power off and back on.  If the error still appears, please turn off the machine, unplug the power cord from the power supply and leave it unplugged for 10 minutes, then plug it back in and turn it back on.  If the error persists, the printer will require servicing..  Please call or email us using one of the methods on the Contact Us page for servicing options available to you.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My MAC OS X 10.7.5 won't talk to my Cannon Printer MG6120

    My MAC OS X 10.7.5 won't talk to my Cannon Printer MG6120?

    Perhaps this will help:
    http://support.apple.com/kb/HT4670

  • Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

    Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

    Bill ...
    Believe it or not, might be a font issue > Computer won't print black text in...: Apple Support Communities

  • Does the pixel size affect printing in iphoto?

    Have trouble printing in iphoto.  I can view the photo in iphoto fine.  When I print, I am just getting a small corner of the picture.  Can the pixel size affect printing?

    Set your ruler increments to pixels Preferences>Units & Increments. You can fill the text box with placeholder text Type>Fill with Placeholder text and get a word count from the Info panel with Show Options turned on from the flyout.
    From the Transform panel you can set a text box's width and height

  • Cannon printer mp480

    I bought my mac pro 3-5 years ago right before the 10.6 update.  I ordered a cannon printer mp480 it was free at the time with my mac pro. It sat in the box for a few years, I just opened it a few months ago. Can it be used with the IOS 10.6?  I'm reading online where it's not compatable... now i know why they may have been giving them away:)
    I can use the copier, but not the scanner or printer.  I can't print anything off of the internet or my computer.  Please help direct me if you can...
    Thank you,
    OC103

    You could ask Canon. You could check for driver updates at their web site and/or you could install this driver update:
    http://support.apple.com/kb/DL899
    According to the list of printers supported your is so I don't know where you got your miss-information from.

  • Cannon printer/scanner image class mf4150

    can I install my cannon printer/fax/scanner image class MF4150 to my IMAC OS X Mountain Lion?

    Hi Glenn!
    I will be glad to assist you.
    It appears that one of the buttons on the control panel may be sticking and causing the error.  I recommend powering off the machine and unplugging it from the wall.  Once the unit is unplugged, press all of the buttons on the control panel, starting left to right, one at a time.  Next, plug the machine back in and power it on. 
    I hope this information is helpful to you.  If the error persists, I recommend that you contact us at 1-800-OK-CANON (1-800-652-2666) for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Cannot Print Report of Developer 6i CANNON Printer

    Hi,
    I am having reports of Developer 6i. In the previous, I have those reports in D2K. Now i complied and the report on Developer 6i and run . The reports are displayed but when i ask for print, it prints only the first page. This things appear in the CANNON Printer. But when we go for the HP printer, this problem does resolve.
    Pleas give me a solution.
    Farhad Islam

    in metalink they are reporting similar trouble with CANON printers (LBP-800 and others).
    They were able to solve it by applying patch 11
    and/or getting latest printer drivers.

  • I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

    I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

    ok no problem! all i did was 1) set up the mobile hotspot on my phone. 2)  turn it and wifi on on the phone. 3)  connect the laptop/desktop to the hotspot network. 4) insert setup disk for the printer and begin setup. 5) complete the setup "using a usb cord to temporarilly connect the computer and printer" 6) unplug usb cable and finish set up on the laptop/desktop. 7) give it a few minutes to show up on the AirPrint menu on the phone. 8) that should be it. I unplugged the printer and plugged it back in, made sure the laptop was totally turned off AND disconnected from the network, and did everything I could to try and make it not work. The printer I have is a Canon MG3122, it doesn't have a fancy screen or even a way to input a password or anything like that, so it just strores a default network that it will connect to. in order to change networks i would have to complete setup multiple times. Since I only plan to use it with AirPrint for my mobile business....the one network is just fine! Hope this helps!

  • B200 error on my MP620 cannon printer

    i lost my manual and have a B200 error on my MP620 cannon printer and would like to know how to fix it, thx?

    Hi kbishop,
    To try and resolve the issue, please remove the power cord from the back of the printer and leave it out for at least 10  minutes, then plug it back in and turn it back on.  If the error persists, the printer will require servicing to resolve the issue. 
    Please drop us a line by clicking on the Contact Us link to start the process!

  • My new Cannon printer does not recognise Firefox

    My new Cannon printer Pixma MG5200 prints web pages from Internet Explorer ok but when I use Firefox (always) it will not print and Firefox crashes. I am using Windows Vista with SP1
    Have queried with Cannon and they say their Easy Web Print
    application is only compatible with IE and printing from Firefox is not supported by Cannon.
    Please advise if you have a way around this
    Tony Horne

    That means the file you downloaded is damaged and its contents cannot be recognized as a valid .dmg
    Download again.

  • My cannon printer Pixma Mx439 has an error code of 5100

     My cannon printer Pixma Mx439 has an error code of 5100. I had a paper jam and cleared it, I took out the ink and replaced it, I have no idea of what else to do at this point. Are you able to suggest anything else. My printer is less than a year old, I should have a warranty.
    Julie

    Hi julieannbean,
    Cleaning the timing encoder film of the printer may resolve the issue you are experiencing.  To do this, please follow the steps located at the link below:
    Cleaning the Timing Encoder Film
    If you still experience the same issue after cleaning the timing encoder film, the printer will require servicing. 
    Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for