Pixelated Issue With Screen? Help :)

Hello Everyone,
as i am new here i have no idea if this is the right place to post but yea, anyways i have a ipod nano 3rd generation 8GB. today as a i looked at my coverflow, it was all pixelated, it didn't work, so then i tried to restore my ipod, and it corruped it? i turned it off unplugging it and turning it back on "middle button and menu button" then when it restarted and i plugged it into itunes it knew it was "corrupted" so i restored it, after that it was working okay till i put a song on it and the thingies were still pixelated, any ideas on what could be wrong, help very much appreciated
Thanks,
Dave.

thanks a lot, i restored my ipod and now everything is working perfectly thanks

Similar Messages

Pixel Issue With Screen

I've had my iPod video for less than 90 days. I purchased it through a local Best Buy retail store. Just a few weeks ago, I noticed that there is a discolored pixel on my screen. It shows up primarily when the screen is black (i.e: when loading videos, playing games, etc.) The pixel is red consistently and does not change color with the rest of the screen.
I know this seems like a trivial issue. However, having the iPod for less than 90 days, something like this really shouldn't have occurred in the first place. The iPod is not damaged in any way. It works perfectly fine, otherwise.
I'm wondering if anybody else has had this problem with their iPod video or if anybody has any recommendation as to what I should do about it.
Thanks. :]

I've been to that page multiple times. But, I'm always unclear of what's going to happen to my iPod in the repair process once I send it off (i.e: all my mp3's being deleted, my whole iPod being reset, etc.).
I've read the legalities and it seems like there's so many strings attached. That's why I was wondering if there's anything that I can do myself to fix it so that I don't have to send it off or if I could just take it to an Apple Store.
Any other suggestions?

Issue With Search Help in Module Pool

Dear All,
I have an Issue with Search help. I have created a Module Pool Program. In this module pool, User requires the search helps for the fields.
Imagine there are 3 fields on a screen. Field1, field2 and field3.
Field2 entries depends on field1 and field3 entries depends on field1 and field2.
I have created a collective search help. and created the corresponding Ztables to maintain the search help entries.
Now I assigned the same collective search help to both the fields . i.e. field2 and field3. But when i execute the module pool program, and press F4 on these fields , the data shown is write. BUT for the 3rd field, when I select F4, The second field values are transfered to the screen, instead of third field value.
Any Idea will be appreciated .
Help me , Its very Urgent.
Regards,

Did you check the screen field names & search help name? is it identical & unique?
Raja T

Issue with F4 help!!!!!! need to resolve it asap.

Hello Guru's,
I am modifying the Web Dynpro for ABAP application for employee search in HR Administrator.
I am able to change the infoset and make use of the one I created using the enhancement framework.
I included couple of standard fields Provided by SAP into the selection fields of the infoset.
And now I have issue with F4 help associated with the fields.
The problem is when you do a F4 on the selection fields the selection option which comes is having couple of columns with the key field highlighted in blue and when selecting a record or row the value selected is EN instead I would like to have the Org unit number to be selected.
to be more clear:
in the popup of f4 assume the columns are
Langu Org. unit Org. Unit text.
as of now Langu is the key field(highlighted in blue) and when selecting a row the value selected is Langu key instead I want to have Org. Unit to be selected.
Please help me out in resolving this.
Thanks in advacne for your time.
Regards,
Pramod

Hi Pramod,
I don't know how it is done in infoset. But if you have a context node and attribute for the field which is displayed in the view, create a custom dictionary search help for the field you want. Design the search help as per your requirements (what fields to be displayed etc..).
In the context attribute of that field property, select 'Dictionary search help' in the Input help mode. Enter the name of your custom search help here.
Thanks & Regards,
Satheesh.

Issues with browser helper in OATS

I'm using OATS and am running into issues with not being able to start the browser helper when I attempt to record a session.
I've tried to restart the browser utility, have re-installed the software and still have the problem.
I had encountered this problem before on another box and the Windows admin gave me domain admin privileges and then I no longer had issues with the browser helper.
Has anyone run into this before? Can anyone tell me whether or not there is any information available going over any required permissions for this tool?
Thanks in advance for your consideration.
Beth

I just want to provide a better description of our issue here.
We work in a secure environment and our client workstations are locked down in order to satisfy the organizational requirements of our customer.
In this environment, we had the problem with starting the browser helper while using the openscript utility. Having local admin on our workstation did not address the problem. We played around with some of the individual permissions to no avail and finally, the admin applied the domain admin privilege to allow us to move forward with our testing.
Can anyone shed any light on what individual privileges would be necessary to run this tool?
Thanks very much,
Beth

HAS ANYONE HAD ISSUES WITH SCREEN CRACKING FOR NO REASON???

HAS ANYONE HAD ISSUES WITH THE SCREEN CRACKING ON ITS OWN???

Good Suggestion Tiki And my suggestion try to keep your Device from getting to Hot, Protect it as well as you can, if your going to Pocket it Make sure it has allot of free space around it..

Issues with Flash Help output

Hello there, hoping to get some advice on a couple issues
with RoboHelp.
We just started deploying FlashHelp here, and have run into a
couple of snags. I am running RoboHelp version 6, Flash player
version 9, and have the Flash authoring software (if needed), but
that’s version MX 2004. We’re running IE 6 and Windows
XP Pro.
Question 1
In a FlashHelp (generated) project, when on the Index tab, if
I use the search box to search for an index word, the following
error displays: "A script in this movie is causing Adobe Flash
Player 9 to run slowly. If it continues to run, your computer may
become unresponsive. Do you wish to abort the script?" If I tell it
NOT to abort the script, the computer still runs slowly. If I tell
it to go ahead and abort the script, Internet Explorer freezes up.
I asked our in-house web team and Flash development team to
look at the index issue, and they discovered something strange. The
index only breaks if the index word entered starts with the letter
A. Has that ever happened to anyone else? We’ve tried
multiple help projects on multiple boxes (computers), and results
have been very inconsistent. Sometimes it breaks, sometimes not,
but ONLY when the index entry starts with an A.
Is there something that I can change in the code anywhere to
prevent that from happening in the first place? Alternately, is
there a way to change the skin to completely remove that input
field from the index? It's not necessary to our process to have it
there, so long as the index entries are there with the scroll bar.
Note: We’re just using the Flash Default skin –
no modifications.
Question 2
One of my latest help projects is context-sensitive. When
called from within the application (F1) the proper topic displays.
However, the TOC always shows the default book - it does not expand
to match to where the user really is within the help.
Even stranger (to me), the TOC works just fine for the
first-level and second-level books and pages. However, anything
third level or deeper, the TOC behaves as described above -
defaulting to the welcome page book.
All the books are books with links (to topics), if that
matters. Also, I tried generating the project as WebHelp, and had
the same results - the TOC still would not automatically populate
when called as CSH from within the application.
In all other respects, things seem to be functioning just
fine.
I downloaded the trial version of RoboHelp 7, and had the
same issues.
Thanks so much!

I can recreate the problem but I haven't seen it reported
before. WebHelp has an option that would let you avoid the input
box in the Index but not FlashHelp.
There is information in Snippet 1 on my site about TOC
synchronisation but I don't know if it will help with FlashHelp.
Please report this bug via the Adobe site.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Issues with Search Helps

Hi Experts,
Anyone have any advice or suggestions for this problem?
Problem:
When running standard SAP search helps (let's say search for material by material type - from MM03) the system seems to truncate my last character. For example if I enter ERSA for material type - and look at the dynamic selection criteria all I see is 'ERS'. Thus when I run my search - no results are returned.
It is very odd behavior.
Notes:
- This occurs with standard and custom search helps
- This only occurs with search helps - other fields do not have this issue
- I recently downgraded my GUI version from 710 back to 640. Since then I have uninstalled and re-installed many times - this does not seem to help.

Why don't you try to login thru some other desktop that have SAPGui 7.10 and check whether its working or not.
a®

Pixelation issues with VoD

Getting pixelation and sound dropping through ALL of certain shows.
I have read through the forums: I've checked my wiring, I have tried playing with the AC on and off... everything I have seen here, but there is a catch witch proves (I believe) that it is not my hardware.
For instance, I felt like watching Game of Thrones today...
Season 4 Ep 1 - Could not watch due to pixelation and sound dropping through ENTIRE episode
Ep 2 - Watched it just fine
Ep 3 - BAD
4 - GOOD
5 - BAD
6 - GOOD
7 - BAD
8 - GOOD
9 - BAD
10 - BAD
The "Good" ones are flawless, no problems, absolutely what I pay for...
The "Bad" ones are unwatchable in any way.
I am seeing this intermittant GOOD and BAD quality On Demand often lately.
What's going on and please do not tell me to reconnect my equipment (which I have done just in case) The above problems do not describe an issue with my hardware.
I have so few reasons to ever complain about my service, I love you guys!! But this is way more than irritating for the amount of money I pay each month.

I have been experiencing this on all VOD TV shows and movies since installing Quantum VMS and clients. VZ tech came out to check signal (excellent) and said it is a known problem for 3 weeks now. VZ customer service personnel just refuse to admit it. I am in Virginia Beach.

FF 20.0.1 Giving Me Massive Issues With Tabs - Help Greatly Needed

So Firefox updated tonight unfortunately, even though I thought I had turned that off, and I'm having massive issues. It took about two hours for me to just get my shortcut keys working again and if I right click to "Open in a New Tab" there is no responsive activity from FF. If I right click on anything (on that MASSIVE menu, btw - really? I don't need all of that!) none of it is working. And any tabs I now manage to get open using my restored shortcut keys go unresponsive.
I've tried re-starting w/o add-ons, but nothing changed. And I'm not restoring to a default of 20.0.1 - at that point I'll scrap this update and go back to my preferred v.19 as of January.

Issues with a massive right-click context menu has been reported as caused by Firebug, so make sure to update Firebug to the latest version.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Will I have Issues with Screen if Connected to PC for long periods?

I picked up a new 80g ipod to replace my old 20g gen 2, and I want to use it at work to play music through my computer. I am concerned about the Do Not Disconnect message with the flashing icon being displayed for 10 hours at a time every day. Am I going to get any characters or images burned on the display? I didn't think LCD's were subject to burning, but seems that some folks out there have had some issues.
Many thanks,
Ken

Geddy1961 wrote:
yes you will have issues with infinity.theyll tell you a speed you will get,which you wont,plus they will never give you a straight answer,your best going with another provider.look through this forum nothing but complaints
you said you get this speed here http://community.bt.com/t5/BT-Infinity/bt-infinity-superslow-broadband/m-p/614636/highlight/true#M59...
hi.here are my results from the test
download - 71.90mbps
upload - 12.07mbps
ping latency (ms) - 42.38

Strange Vertical lines and pixelation issues with my Powerbook screen...Hel

I have got a problem with mt LCD screen which now permanently displays lines of "dead" pixels, but they can't be dead because they chaneg all the time. If I move a window, I get lots more, which are created by the edge of the window, like a ghosting? Does that make sense?
I have taken a screen grab, but not sure how to feature it in these forums. Anyone got any ideas or know about this problem?
I have had a similar problem with this and other laptops, but it has always been a temporary thing before, when I had overloaded the system or something, and I got 'ghosting' from the trailing edge of a window, but this is permanently there?

I have now attached a monitor to the PB, and it happens on the monitor too...maybe suggesting something wrong with the graphics card or logic board, rather than the screen itself. When I type this message, I get strange red 'ghosting' lines where the cursor moves across the page.It reminds me of the 'Etch-o-sketch' game, where you draw lines, and then wipe them off. I can move a window from left to right and get these ghosting lines. When I move the window back right to left, they erase the lines to the left of the window, but I get more to the trailing right edge of the window...i.e. on the right of the screen.
Scrolling also removes these pixels, but creates new ones elsewhere.
Any ideas?

Issue with Value Help not showing in Portal screen Please Help

Hello Guru's,
What is the best practice for doing ESS/MSS upgrade.
Since everytime we upgrade the BP we need to redo all the customizations again in the new track and deploy.
I have gone through Note 872892 and read the NWDI cookbook.
I feel there should be some tool (which will tell the differences in Code from one track to other if so how to install and where to install?) or a better way to apply the customizations to the new track when we upgrade the ESS/MSS components.
Appreciate your help.
Thanks,
Pramod

these links should be handy
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1620366250DB20044614760992422928End?blog=/pub/wlg/3390
How to Migrate Developed Software Components to a New Release in NWDI

Pixelation issue with logo

OK, so this issue is now the bane of my existence. I have a logo that I created in Illustrator CS5 that I use on my website but also on Facebook. Here is a link to my logo on my domain:
http://www.tortacouture.co.uk/logo.jpg
This looks fine and exactly how I want it to appear. However here is the exact same logo (multiple times) in my facebook album.
http://www.facebook.com/media/set/?set=a.235689163125829.73019.235686989792713
This might be easier to see on a laptop where you can tilt the screen but notice the pixelation around the letters and at the edge of the circle. When I remove the letters the orange in the centre has no pixelation but it is still around the edges. I uploaded the same logo but in green and the pixelation is still there however it's hardly noticable. I need to have this logo in the orange/red colour and even when I use web safe colours the issue still persists.
I have tried the following things which have not helped:
saved as .png, .tiff, .gif, .jpg
saved for web
exported
exported to photoshop
web safe colours
align to pixel grid
removed anti-aliasing
resizing
This is driving me mad - so any help is hugely appreciated.
Thanks

I took the larger jpeg you had and saved that for the web and got this
which looks pretty good you shoud be able to do better with your save for the web.
I know the problem, in the Save for the Web and Device you should select either Art Optimise or Text Optimize
right now you probably have none selected.

Strange Issue With Search Help

Hi Experts,
I am stuck with a search help issue, when using a certain Help for an input field on my screen i am getting a "Value help dialog canceled" cancelled error , the same search help seems to be working fine
when run from sap r/3.
I am pretty sure the design part (Attribute binding and mentioning the search help in the context ) is correct and how it should be.
Could Someone Please throw some lite on this issue.
Thanks In Advance,
Chaitanya.

Hi Chaitanya,
When reusing DDIC search helps in WDA, it may not always work as desired. Calls to classic screens in search help exits for example is one of the scenarios that works pretty well with SAPGUI but doesnt work with WDA.
The following links may be of help!
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9f724642314aabe10000000a42189b/frameset.htm
Thanks,
Chitrali

Pixelated Issue With Screen? Help :)

Similar Messages

Maybe you are looking for