Pixelated vod only when furnace comes on

Here is an interesting issue that I've had since fios was first installed. I get pixelated (blocky is a better description) video on demand when the furnace kicks on only. The rest of the time it looks perfect. It happens to both of my set top boxes which are on each floor of my house. The furnace is on its own circuit. I did try plugging the ONT and the router into different plugs just in case. I even tried ferite cores around the coax as well as the power cables for the furnace and ONT. Also, all the coax cables seem to be very tight. I can easily reproduce this issue by simply turning the furnace on while watching VOD. Any ideas? Thanks!
Solved!
Go to Solution.

What you are experiencing is electrical interference from the furnace that is effecting the coaxial cabling.

Similar Messages

Do I get better results/ keeping the battery's life longer by charging only when it comes to 5-10% or should I let it empty and then charge it? Someone told me also to turn it off while I charge it... So help what is the best way to keep long life battery

I got the new iPad on June 2012 and I wish to keep the long life of the battery as much as I can. I always and only use the cable that comes with the product and never charge it through computer.
Should I:
1) wait till baterry is completely empty, pratectly dead and then charge it?
2) charge it when it reach 5%-10%.
3) turn off the iPad when I charge the battery?
Thank you apple support :)

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Pixelation of video when subtitles come up

Hi
Using FCE3.5 and I have my main clips in the V1 channel. I've superimposed subtitle text generator clips in the V2 channel to put people's names and job titles in when they are on screen. When the subtitle comes up it pixelates the V1 video clips until the title clip ends. Have tried adjusting the transparency of the title clip to 90% as suggested in one guide I have, but no change. The background for the title clip is the default black, I wonder if this is causing the problem. What have I done wrong?!

A properly made title that's been properly exported and encoded shouldn't do that. Sorry I can't tell without seeing it.

HT4623 My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message.

My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that

Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue.

My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an

My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that

Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue.

Using Outlook 2007 I want to receive emails on my iPhone 4 only when Outlook is NOT open on my computer, as when away from home or want to quickly check email when computer is not turned on. Either ALL emails come to my iPhone or none at all.

Using Outlook 2007 I want to receive emails on my iPhone 4 only when Outlook is NOT open on my computer, as when away from home or want to quickly check email when computer is not turned on. Either ALL emails come to my iPhone or none at all. Is the setting I need to change in Outlook or on the iPhone or is it somewhere else? I used to have this setting but transferring Outlook to a new laptop somehow turned it off.

No. You really can't do that. Not easily at any rate. You would have to set them both up to use POP3, but even then there is no way to guarantee that the phone won't poll the server prior to your computer doing so, pulling down the message from the server.

Display goes off and comes back only when Satellite A210 is restarted

Hi,
Satellite A210 displays goes off now and then and comes back only when the machine is restarted.
Usual runtime runtime 30 or 45 mins
Please advice
# Is this a hardware problem or software?
# Does some one else faced same problem do advice?
Machine is year and a half old runs windows vista basic that comes with it.
I have reinstalled the display adapter drivers also the problem remains same

Hello
Have you tested an external monitor on the notebook?
If the external monitor works fine it seems to be an internal display issue and must be replaced.
Are you running the factory settings on your notebook or have you installed your own Windows version? Before you go to an authorized service provider you should restore the factory settings to determine if its a hardware or software problem. With the factory settings all should work properly and if not in my opinion its a hardware problem.
Check this!!!

I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

When I try to open the shared library on the 2nd computer (the one I want to xfer music to), the only songs that come up are those that are already in that same library (the library on the 2nd computer). While I can see computer

When I try to open the shared library on the 2nd computer (the one I want to xfer music to), the only songs that come up are those that are already in that same library (the library on the 2nd computer). While I can see computer #1 listed under 'shared,' when I click on it the only songs I can see are those that I already have on the 2nd computer. Hopefully that makes sense. Basically, the library from computer #1 isn't loading up.

What level of OS X is installed on your Mac (your profile is incomplete)?
Barry

TS1347 IPhone5 on 6.1.4 - missing named contacts on contact list. Can see missing named contacts when messaging, but when selected come up as only phone numbers in the sent to window. What is resolution? Can I sync only contact list from to iTunes backup?

IPhone5 on 6.1.4 - missing named contacts on contact list. Can see missing named contacts when messaging, but when selected come up as only phone numbers in the sent to window. What is resolution? Can I sync only contact list from to iTunes backup?

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Dead pixel only when using Pages

One dead pixel. Always the same one, only when using Pages. Has anyone else seen this?
MacBook Air 11", 1.6 GHz Core i5 CPU, OS 10.8, Pages 4.2

This has been happening to me ever since I upgraded to Mountain Lion. Certainly a software issue, I expected an update to iWork to resolve this after the release of 10.8 but it seems Apple have all but forgotten about their iWork suite...
Below are images of the effected area when a Pages window is selected and unselected.
OS X 10.8.2 - Pages 4.3 - Mid 2011 2.3 GHz Mac Mini - 23" Apple Cinema Display (Old Alu, not that it matters)

Every 60 seconds a blip like static comes in my BOSE earphones only when the ...

Every 60 seconds a blip like static comes in my BOSE earphones only when connected to DELL laptop Windows 7. Started about 6 weeks ago.

Al's link to Dr. Smoke is good but what you can try right now is to restart the computer and hold down the shift key when you hear the bong. This will start you up in Safe Mode, you will know you are in that because it will say so on the opening screen. Then restart again and see if you still have the problem.
In safe mode Tiger deletes a number of font caches, if this is your problem it should be gone after starting up again. But if you've turned off any fonts in Font Book you will have to do so again.
Hopefully that will be a quick fix, if not read Dr. Smoke's FAQS. Actually, you should read them even if it does fix it because all that stuff is good to know.
Kevin

Application set at Osoft webiste visible only when IE run as COM+ user?

Hi,
we have installed BPC 7.5 SPS08 version for NW to one of our machines and configured it.
When we open IE and try to access Osoft website / Adminsitration - we are able to select Application set ONLY when we run the IE as the COM+ user which is set in Server manager (in our case <domain>\BPC_SYSADMIN).
When we run the IE as any other user we can not see any application set to choose from in pop-out window.
My question is - is this (with <domain>\BPC_SYSADMIN user) the normal and the only way to successfully load application set at Osoft website?
Thanks!
Erik.

Hi Erik,
Are you able to logon to BPC for Excel or BPC Admin client with any user (not the COM+ user) and see any available AppSets/Applications?
If this is a fresh install and you haven't managed BPC security settings yet then this behavior would be expected.
On a fresh install you set up an admin user by running program UJA3_WRITE_SYS_USERS. You can check this on t-code SE16 and display table UJA_SVR_DEFAULT values.
Only this user will have access to APSHELL and you will have to use it to create new AppSets and grant new users access to them.
Regards,
Marcelo

Only the player come up when I lauch the Itunes aplication. can somebody help ?

only the player come up when I lauch the Itunes aplication. can somebody help

I'm not sure if the Get Album Artwork feature finds and "adds" artwork to WAV files, but if it does work, the difference is that getting artwork from the Store doesn't embed the artwork into your song file (which is what happens when you manually copy and paste artwork to the file). WAV files do not support embedded artwork.
More here:
http://support.apple.com/kb/TA27633?viewlocale=en_US

I start my macbook up an i write my password but when i come in only the background shows ????

I start my macbook up an i write my password but when i come in only the background shows ????

I start my macbook up an i write my password but when i come in only the background shows ????

Pixelated vod only when furnace comes on

Similar Messages

Maybe you are looking for