Pixelated worksheet after being minimized!
This is just a minor problem but, can anyone explain why my multi- worksheet workbook renders pixelated after being minimized and then maximized? The only way to correct it is to select another worksheet within the same workbook and then return back to the original one!
Glen,
Just guessing, but is it possible that you're running short on memory, either RAM or HD? Shut down your unneeded apps and perhaps even try a Restart. See if things improve. If so, it may be memory. Beyond that, I would be at a loss.
Jerry
Similar Messages
-
While I have the FF browser minimized and I am working on another application or in another browser, the FF browser will maximize and jump up on my screen automatically. This happens often while it is minimized. There are no pages that would seem to auto-refresh (don't think that's relevant though). The whole thing will randomly maximize for no reason. Can this be stopped?
It's annoying, especially if I am working and training people and the FF browser jumps up out of nowhere after being dormant. This has been happening for several week, it's now become bothersome.Ya, it takes forever for it to happen. It seemed to be doing it with almost all of my add-ons... It's probably some combination of add-ons.
illumiveri, can you confirm if you have some of the same add-ons as me. I have:
* Adblock plus
* BetterPrivacy
* ChromeEdit Plus
* FindBar Tweak
* NoScript
* Tab Mix Plus
It happened like 3 times within a few hours. It's like someone or something is controlling my mac. It's disconcerting. I disabled remove cookies by timer in betterprivacy. Now let's see. Also, I upgraded to fx 7. so it was happening since 4 and even with 7. -
Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
Hi all,
When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated. However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
Thank you!
HNCan you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG? Show the same area of the photo and zoom to 100%.
It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
The amount of grain depends on the ISO sensitivity setting on the camera. -
Images burn into the screen after being there for only a few minutes?
What's wrong with my mac if images burn into the screen after being there for only a few minutes?
I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?Hi,
Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
We can also boot into clean boot mode, test the issue.
http://support.microsoft.com/KB/929135
Run a virus scan to eliminate some malware\virus
Similiar issue
https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral
Yolanda Zhu
TechNet Community Support -
Picture files only partially display after being published
Recently .jpg and .png pictures I have created only partially display after being published. I've tested it using Paint, Publisher and Gimp with mixed results. The pictures display correctly when I view them locally on my pc.
Here are the test pictures I made in each program:
http://www.bgchamber.net/images/GimpTest.jpg
http://www.bgchamber.net/images/PublisherTest.jpg
http://www.bgchamber.net/images/PaintTest.jpg
The only pictures that fully display are those that were taken from a camera, but after I resized one in paint, it also didn't display properly. My question really is, is this an issue with Microsoft Expression Web or with the server hosting the files?Publisher is NOT a photo editing program. Neither is Word. Nor is Paint.
You need a real, and simple, photo editing program. Paint.NET is a good, free one. I find GIMP cumbersome (but it's batch processing is handy). And your graphics aren't being created and saved properly. For example, the events.html page has graphics on it
that total well over 3 MegaBytes! Pity the poor soul with a wireless connection. The graphics on the events.html page are largely illegible, and as such serve no real purpose (and make the site look bad).
Let's take an example...on the home page gallery is a graphic for the 2015 Chamber Scholarship. It's displayed at 525 x 340 pixels, yet the image sitting on the server (and which must be downloaded by the visitor) is 1275 x 825 pixels. So you have an unnecessarily
large graphic taking space on the server, having to download to the visitor's computer at full size, and then be shrunk by the browser to only 17% of the original area. That file should be created and saved in a proper graphics program at the final size you
plan to use (and in this case, use PNG format). The larger file takes at least 5 times the storage space on the server as a properly sized file (and takes 5 times as long to download and upload).
I've superimposed the display size on top of the full size and shrunk them down to display here in the forum. See below.
All the graphics that I have checked on your site have the same problem, and if your site has been up a long time and you haven't cleaned out the old files on the server, you may have run out of server space, which would corrupt the new files.
Smaller files will also upload faster and more reliably. Plus--browsers stink at resizing graphics. Do that in a proper graphics program to get the best quality.
Use JPG for photos, GIF for hard-edge graphics with few colors and no gradations/shading, and PGN for hard-edge graphics with full color and gradations/shading. And make sure you are saving the images in the proper version of the format (RGB for web).
A horse walks into a bar. The bartender asks "Why the long face?"
"Because I was born into servitude and when I die my hooves will be used to make glue."
It was at this point that the bartender realized he would not be getting a tip. -
SQL Developer hangs for a few minutes after being idle for a while.
Is anyone aware of any issues with SQL Developer hanging for several minutes after being idle for several hours? After being idle for several hours (and probably minimized), when we bring up SQL Developer we just get a blank white window for several minutes before it becomes functional. Obviously, this isn't a critical issue, but sure is annoying when you run into it.
Thanks in advance!!
RobThis is fairly typical java application behaviour. For whatever reason, they are particularly prone to being swapped out by the operating system and take time to swap back in.
There is an add-in around called "keepresident" which helps this but I thought it had been superceded in later JDK version. -
6600gt unresponsive black screen after being idle?
everything works fine now that i have installed the 67.03 drivers on my 6600gt. the speeds are great, overclocking working, and runs very well on my games. but now when i leave my computer for a long period of time, when i come back, the computer is still running but the monitor is shut off. and the light blinks every two seconds. it never did this before. is this a known issue with driver version 67.03? The latest forceware drivers didn't work. always use driver cleaner pro and follow exact instructions. im not getting any artifacts and as long as i am playing a game, or basically doing anything, the monitor will stay on. only happens after being idle. i have screen saver disabled, nothing set to go on standby and hibernation is disabled.
MY SYSTEM Specs:
here is some more information...
CPU:
AMD Athlon(tm) 64 Processor 3000+
Manufacturer AMD
Family AMD Athlon(tm) 64 Processor 3000+
Architecture 64-bit
Internal Clock 1.8 GHz
Internal Clock Maximum 3.0 GHz
External Clock 201.0 MHz
Socket Designation Socket 939
HyperThreadingTechnology N/A
Capabilities MMX, CMov, RDTSC, 3DNow!, Extended 3DNow!, SSE, SSE2, PAE, NX
Version AMD Athlon(tm) 64 Processor 3000+
Caches
Level 1 128 KB
Level 1 128 KB
Level 2 512 KB
DX INFO:
Version 9.0c
Long Version 4.09.00.0904
Direct Draw info:
Version 5.03.2600.2180
Primary Device NVIDIA GeForce 6600 GT
Video Card
NVIDIA GeForce 6600 GT Driver 6.7.0.3
Description NVIDIA GeForce 6600 GT
Manufacturer NVIDIA
Total Local Video Memory 128 MB
Total Local Texture Memory 128 MB
Total AGP Memory 256 MB
Driver File nv4_disp.dll
Driver Version 6.7.0.3
Driver Date 11-4-2004
Driver WHQL Certified true
Max Texture Width 4096 px
Max Texture Height 4096 px
Max User Clipping Planes 6
Max Active Hardware Lights 8
Max Texture Blending Stages 8
Fixed Function Textures In Single Pass 8
Vertex Shader Version 3.0
Pixel Shader Version 3.0
Max Vertex Blend Matrices 0
Max Texture Coordinates 8
VGA Memory Clock 1.0 GHz
VGA Core Clock 9.7 MHz
PCI
Name NVIDIA GeForce 6600 GT
Vendor ID 0x10de
Device ID 0x0140
SubSystem ID 0x00000000
Revision ID 0x00a2
MOBO:
MSI K8N NEO 4 w/nvidia nforce 4 Ultra/standard Chipset based
Supported Slot Types ISA, PCI
Manufacturer MICRO-STAR INTERNATIONAL CO., LTD
Model MS-7125
Version 1.0
BIOS Vendor Phoenix Technologies, LTD
BIOS Version 6.00 PG
BIOS Release Date 09/09/2005
BIOS Properties Plug and Play, Flash
System Devices
Name PCI standard host CPU bridge
Manufacturer (Standard system devices)
Name PCI standard host CPU bridge
Manufacturer (Standard system devices)
Name PCI standard host CPU bridge
Manufacturer (Standard system devices)
Name PCI standard host CPU bridge
Manufacturer (Standard system devices)
Name PCI standard ISA bridge
Manufacturer (Standard system devices)
Name NVIDIA nForce PCI System Management
Manufacturer NVIDIA
Name NVIDIA nForce4 Parallel ATA Controller
Manufacturer NVIDIA Corporation
Name NVIDIA nForce4 Serial ATA Controller
Manufacturer NVIDIA Corporation
Name NVIDIA nForce4 Serial ATA Controller
Manufacturer NVIDIA Corporation
Name NVIDIA Network Bus Enumerator
Manufacturer NVIDIA
Name Realtek AC'97 Audio
Manufacturer Realtek
Name Standard OpenHCD USB Host Controller
Manufacturer (Standard USB Host Controller)
Name Standard Enhanced PCI to USB Host Controller
Manufacturer (Standard USB Host Controller)
Name PCI standard PCI-to-PCI bridge
Manufacturer (Standard system devices)
Name nForce4 PCI-Express Root Port
Manufacturer NVIDIA
Name nForce4 PCI-Express Root Port
Manufacturer NVIDIA
Name nForce4 PCI-Express Root Port
Manufacturer NVIDIA
Name nForce4 PCI-Express Root Port
Manufacturer NVIDIA
Name nForce4 HyperTransport Bridge
Manufacturer NVIDIA
Operating System Info:
Operating System Microsoft Windows XP
Version 5.1.2600
Service Pack Service Pack 2
Windows Environment 32-bit
Locale US
Desktop Width 1024 px
Desktop Height 768 px
Desktop BPP 32 b
hard drive info
Hard Disk Info
Hard Disk Drive 1/2
Name ST340014A
Manufacturer (Standard disk drives)
Capacity 37.27 GB
Model ST340014A
Interface Type IDE
Hard Disk Drive 2/2
Name WDC WD200BB-00DEA0
Manufacturer (Standard disk drives)
Capacity 18.65 GB
Model WDC WD200BB-00DEA0
Interface Type IDE
Power supply:
Thermaltake 430 watt
Model: XP550 NP
AC INPUT:115/9A
230/5A
DC OUTPUT
AC INPUT:115/9A +3.3V +5V +12V -5V -12V +5VSB
230/5A
frequency: 47-63 hz 20A 30A 18A 0.5A 0.8A 2AQuote from: perdition on 23-July-06, 17:23:48
now it does it after while playing a game although it takes about 2 hours for it to happen. i reinstalled os again. new drivers, my monitor just goes to standby. i tried another monitor, does the same thing. any suggestions?
yep, re-check VGA colling sysmtem. it may VGA overheat. it may coused also by RAM instability. run memtest to check it and prime95(sp2004) to test memory stick(s) stability. -
Headphones no longer work after being plugged into speaker
Hi i purchased a ipod touch 5th generation 32 gb bundle from target just over a week ago which came with the iCoustic 20 in 1 Accessory kit Model No : IC184. After plugging the ipod into the supplied speaker this morning trying to listen to music it kept making stacic like noises and changing volume it was alwful to try and listen so gave up and went back to taking it off speaker and playing it back through apple headphones but now after being plugged into the speaker the headphones wont work its just a buzzing sound if you turn the volume up all the way loud the music will come back through headphones then when turning it down it cuts out again or if you manage to get the music it will stop after a couple of seconds. I have done a factory reset but it has made no difference.Please help have a very upset daughter it is frustrating do we take this back for a refund and get a new one if so how do we keep the music and photos etc she has on this one? Thankyou.
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack. -
Will Not Copy After Being Idle
THIS IS A COPYING ISSUE!!! After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print. I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem. Consequently, we purchased a new HP 5740 printer The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work. If you then turned the printer off and immediately turned it back on, it would copy. Again, Comcast reiterated it was a printer problem. I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer. After hooking up the second HP 5740, the same problems with copying occurred. I returned the second HP 5740 to the dealer for a refund and left town for three months. We recently returned and purchased a HP ENVY 7645 printer from another dealer. We are having the same issues with this printer as we had with the two previous HP 5740 printers. I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician. The installation occurred today and we are still experiencing exactly the same problem. The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy. He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem. DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?
Hi @lamoso,
Welcome to the HP Forums!
I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
Let's see what happens after giving these two steps a try!
Thank you for posting!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?Thank you for the tips!
OGELTHORPE wrote:
I would check to see if the WD HDD has its own Sudden Motion Sensor. If so, it may be coming in conflict with the one in the Mac. If that is the case, I suggest disabling the SMS in the Mac.
WD5000BEVT does indeed have it's own protection:
ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
Melophage wrote:
this could be indicative of a faulty internal SATA cable. /.../
Reteep,
you could try the same thing as well.
In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped. -
I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you have DISABLED MY APPLE ID. Is this a punishment you use to anyone who takes up a stand against charges being made unauthorised on their account?. Please tell me why you have disabled my account. When will my account be restored? If not when will you refund ALL my purchases made to APPLE/ITUNES? I can then move on to another brand and hopefully better customer service. After reading articles regarding APPLE ID DISABLED it appears common practice from your company to DISABLE anyone's account if they question unknown charges. Please reply with your intentions regarding the unauthorised payment and the DISABLING of my account.
David Forrester.
Sent from my iPad
On 18 Mar 2014, at 09:20, iTunes Store <[email protected]> wrote:
Follow-Up: 319042795
Hello again,
I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance.
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Dear David,
Welcome to iTunes Store Customer support.
I understand that you have been charged an additional 9.99 GBP for a purchase that not authorized. I know how eager you are to know more about this purchase and I am happy to look into this for you.
David, the purchase worth 9.99 GBP was for a day pass from "NOW TV for Apple TV." To review your iTunes Store account's purchase history, please follow the steps in this article:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Please reply to this email and let me know if this purchase was unauthorized.
Thank you for being an iTunes Store customer. Have a great day!
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Lang_Country: en_gb
User Storefront: UK
Concern Type: Problem Not Listed
Web Order #:
Content Title: NOW TV Day Pass
Provider Name: BSkyB
Track IDs: []
Purchase Date : 2014-03-16 12:33:48 Etc/GMT
Purchase Device : Apple TV
Comments : I am being charged for what is listed plus another _9.99 for Apple TV pass. Did not authorise this _9.99 charge and not sure what it is exactly.
<Personal Information Edited by Host>This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
Unfortunately no one here can access your support history. You must respond to the emails directly. -
I bought an airport express after being assured that I will be able to AirPrint from my IPad. I have set up airport utility on my Hp laptop and configured it properly with the express. But still I'm not able to detect the printer attached to the USB port of airport express, neither on my laptop nor on my IPad. Can someone tell me if and how it can be done?
Who assured you that an AirPort Express would allow you to use AirPrint from an iPad. They were incorrect.
AirPrint from iPads and other iOS devices is only supported on a select few wireless network printers that expressly advertise that feature. An AirPort Express will not add that feature to a printer that does not support AirPrint. Also, for printers that do support AirPrint a wireless access point is not required since the printer needs to support wireless networks connections internally.
The HP laptop should however be able to print to the printer connected to the AirPort Express. Try also installing the Bonjour Print Services for Windows. It will make printer discovery a lot easier when using Bonjour enable devices like an AirPort Express. -
How can I get a family member back after being removed from family share?
How can I get a family member back after being removed from family share?
See [[Replace your Sync information]] but read the cautions carefully.
* also see [[firefox Sync is not working]]
It is always a useful precaution to make manual bookmarks backups
* see [[Backing up and restoring bookmarks]]
The above article also explains about the autobookmark backups that firefox generates, but be sure to make manual backups as you work, it is very easy to overwrite the wrong set of backups.
I am not entirely certain what firefox is doing in your case, perhaps the synced Netbook does not have the expected set of bookmarks on it.
Presumably sync may be uninstalled or disabled like any other add-on
*see [[Uninstalling add-ons]] -
Creative Zen's clock gets reset after being plugged into the w
I bought the wall recharger for my Creative Zen 8 GB, as I had another MP3 player (SanDisk Sansa e260) die mysteriously after being plugged into the computer's USB port.
The only complaint I have is that if I leave the Zen plugged in, after it finishes recharging, the screen goes blank and when I unplug it and turn it on, the clock and calendar are reset to their default (March 7, 2008).
I am on a Vista Home Premium computer (no service pack). I have the latest the firmware on the player and use the latest version of Media Explorer.
Does this happen to anyone else who uses the wall charger?Hello, I read your post & am replying to it because I too am having a clock syncronization issue but mine is not related to plugging it into a wall charger. My date AND time resets too to April 7, 2008 for some reason. I reset it yesterday to the correct date and time for yesterday (May 8, 2008) and now it is reset back to the previous date I mentioned. It couldn't even keep the time/date accurate for 24 hours! My battery was already charged however several days ago and is no where near being finished (it says half full). My firmware version is .2.0.
Anyhow I know this doesn't help you at all, but at least you're not alone on this issue...mine doesn't originate with charging it though...maybe that will help you at the very least.
Drew -
Flash drive no longer works after being connected to a Windows XP machine.
After being opened on a Windows XP machine, the contents of my flash drive now shows up on my Macbook pro as a single .lnk file. What happened? It's MS-DOS (FAT32).
Is there any way out of this or has all my data been lost? I've never experienced this issue previously.Thanks. I've now scanned it with both Sophos and ClamXav and both have come up negative for infection.
At least while the scan was running I could see that all my data is still there as the name of each file appeared as it was going through the scan.
My efforts to sort this out seem to have made things worse as now it opens up word whenever I try to see the contents. I'll try it on a PC tomorrow and see if I can figure out what happened. Looks like the file system has been damaged in some way.
Maybe you are looking for
-
How can I reduce the time it takes to render my clips?
I'm working on a MacBook Pro, 2.4 GHz Intel Core 2Duo machinewith 4 GB 667 MHz DDR2 SDRAM, usinf Final Cut Pro 6. In my current project I have one clip that's about 40 minutes long. I recorded separate audio on a Zoom H4n and the audio clip is even l
-
Any way to connect MBP to TV?
I have a 17" MBP and would like to know if there is an adapter which can connect it to a TV set? Also, if there is an adapter would this work with bootcamp? as this would be used for gaming. thanks
-
Start Yosemite in recovery mode
In preveous versions of OS X you could access recovery mode (partition) by pressing alt-key during startup. Now in the latest os this partition is not present (at least on my mac). Why is that, and how do I go about to create it?
-
Unable to initialize the Live Cache Instance
Hi I have installed SCM 4.0 with windows environemnt and SQL as database. I have installed Livecache in the same box and created an LCA instance When i tried to initilise LCA instance i am getting the following error. Name of the Database Connection:
-
Slide show using default images on Pause
Why is my AppleTV showing the default Apple Pictures for the screen saver slide show whenever the the is paused. It shows my Flickr pictures when the AppleTV is not Paused. Is anyone else experiencing this problem?