Pixels and colors too low

After upgrading my video card drivers, geforce8600gt, I get a error message in Photoshop elem. 5.0 saying it needs 1024x768 pixels and 256 colors so wont let me view photos
I have 1680x1050 and 32 bit high colors.How do I get 5.0 to see this?
Thanks in advance,....

Do you get this error when you start the Organizer, the Editor, or both?
Let's find out what the Organizer thinks your display resolution is. Using the instructions in this FAQ, post the entire contents of the Log.txt file here:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#Examine_the_Organizers_l og_file
Next, let's find out what Windows is reporting for resolution and colors:
- Vista: Right-click your desktop, select Personalize, Display Settings.
- XP: Right-click your desktop, select Properties, Settings tab.

Similar Messages

Quicktime 7.6 on XP - MOV files pixelated and color is distorted

I have reinstalled QT 7.6 on my XP SP3 system several times. I am still getting distored video, pixelated and distorted color, when I play MOV files.
Any ideas where to start to fix this? Thank you.

QuickTime Control Panel / Advanced tab. Check the box to use "safe mode" (video).

I brought a new ipad mini with retina. The color saturation is too low to me, especially the purple. My wife started to complain because the color is really different from iphone and ipad. Can user adjust that?

I brought a new ipad mini with retina. The color saturation is too low to me, especially the purple. My wife started to complain because the color is really different from inphone and ipad. Can user adjust that?

Other than a couple of minor adjustments, such as the one that Diavonex suggested above, there is nothing that a user can do in settings to adjust color. There is no way to calibrate the color like you can do with a computer monitor.

Trying to make a calendar and every picture is coming up too low of quality

I am trying to make a calendar for my mom's Christmas present, but every picture I put in the calendar to be the month's picture has a caution box in the corner and says "This photo may print at too low of quality". I just don't know if this is normal with using your own pictures but I don't want to spend the money on this calendar and then it not turn out very good. Please let me know what you have done or if there is anything to do.

Welcome to the Apple Discussions. What are the pixel dimensions of the pics you're trying to use?
I ran a test on a calendar using the picture theme and for a full page photo to avoid the warning triangle it must be approximately 1535 px x 1181 px or roughly 120 dpi.
You'll have to decide how far below that level those pictures are and decide if it's worth the gamble. Or use layouts which have more photos per page and thus require smaller sizes.
Message was edited by: Old Toad

White pixels and too much contrast on new touch

hi all!
i got a new touch today. i allready have one but this one i won in a contest. anyway, when after having synced over alot of content i started noticing som strange things about the screen. first of all, some colors looks washed out and too bright. it has nothing to do with the settings since i allways had my old one on full brightness and it never looked like this.
then i when i looked closer at the screen i saw alot of white pixels that disapeared and apeared depending on how i hold the touch. here is a pic of the pixels (note that the screen is not this bright, my cam just made it like that for some reason):
http://img182.imageshack.us/img182/8443/shiiiit012copyqv1.png
so is this what people call dead pixels? would i get a new touch if i send it to apple you think? or are there anything els i could do? we dont have any official apple stores where i live. thanks alot in advance!

Did you get this problem fixed? I have only had my ipod touch for about 30 days and it too lost it's contrast. It now looks white washed, with little contrast. There is no true black, white or gray, and the colors seemed washed out. I am considering simply taking it in for repair. What did you do? Thanks for any information you can provide.

The videos have low fps and become TOO choppy.

Not be to do, this is irritating. Whenever I want to see a video on youtube or any other page, the video looks AWFUL in good quality. I always see the statistics and fps are too low. I have already tried to remove the acceleration hardware, but does not work, and instead, as my video card is on the blacklist, acceleration is not activated and that is causing me problems. I would like to know how to improve the amount of fps. I don't want to, at least temporarily, buying a video card.

Video decoding and rendering are very CPU intensive. The GPU is purpose-built for this task and frees up the processor for other stuff. In your instance, we're not able to leverage the hardware on your system, so everything is getting done on the CPU, and it's not able to process and render the stream fast enough for the video to be watchable.
You can view all the videos in the lowest available quality (this reduces the number of pixels that need to be processed), or if you're running other programs in addition to the browser, you can close those to minimize the number of CPU cycles being consumed by other things.
Aside from that, there's really not a lot you can do. If cost is a factor, you might want to look around for a compatible video card that's 2-3 years old (like one of the name-brand nVidia/ATI cards) on eBay. I buy a lot of old hardware for testing, and I see stuff in the $10-50 range all the time.

Volume too low on ringer and with hands-free headsets

Both the ringer's volume and the volume within headsets are too low in my new Droid X. When holding it to my ear while talking it is loud enough well below max volume, but hearing people through headsets while driving is often too low with all volumes set to max (on loud freeways, for example). I usually keep my phone's ringer on silent vibrate, but it would be nice to be able to turn it up louder when the phone is sitting on a desk at home. Cell phone ringers can be obnoxiously loud, but there are times when people need to have them turned up.
Because it is an issue in both the ringer speaker and the jack for wired headsets, it seems like there is a good chance of getting a software fix to raise the max volume levels. Reading posts on forums, it seems clear that this problem is widespread in most, if not all, Droid X devises.
If you are having similar problems, please take a moment to call both Verizon and Motorola with a polite report of the issue. I spoke with both today and they said they were aware of the issue, and the tech at Motorola said they were "looking into" a software fix for it. If enough people call and report it, we have a better chance of getting a fix sometime soon.
Verizon's support line is: (800) 922-0204.
Motorola's is: (800) 734-5870 (I chose #6 for "other issues" a couple of times after routing into Droid support to get a live tech)
It can be frustrating to filter through the support systems and report it, especially if they tell you to try obvious things like rebooting the phone and turning the volume up, but it really is the only way to get them to fix this issue. Both techs I spoke with actually looked in their systems right away and acknowledged the issue is being reported by people.
Of course, if anyone has a real solution to this issue, please let us know what it is!

Thanks for the suggestion JKramer. I should have been more clear about having adjusted all volumes up in the settings screen. Assuming all sound options are located within the "Settings --> Sound & Display" screen, then yes, I have tried changing them. I have also tried changing the option to "use incoming call volume for notifications" under the "ringer volume" settings, after reading that someone had success in improving volume that way.
This issue is not a problem all of the time. It is only an issue when there is an elevated level of background noise, such as driving on the freeway, or having music or a movie playing in the room.
The phone is otherwise excellent! I live and commute in areas of very spotty reception (with all cell providers), and this phone will keep calls and not even have voices garble where my past two phones have consistently dropped calls in at least five problem locations. So far, everything else about it seems to work great!
Maybe some of these phones don't have this issue. Or, maybe the people who say they don't encounter the problem are lucky enough to live in relatively quite environments most of the time. In a quiet house or office, it is certainly loud enough. It just needs to have the option for increased volume when in noisy places. The issue is that its "max volume" settings are not as loud as with other phones.
Searching for something like "Droid X volume" will indeed show many people experiencing these same problems on various forums...

Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

Low Battery - Battery too low for Radio use - And Curve will not Charge - HELP!!!

Need help and lost without BB. My BB displays Low Battery. If I try and make a call I get Battery too low for Radio use. I have tried to charge the BB but nothing happens and still cannot make call or charge unit. Tried charging overnight with car charger and A/C adapter. Tried removing battery for one minute and reinstalling.
Any ideas????

Greetings, and welcome to the BlackBerry.com Support Forums.
When you are connected to the charger, do you see the lightning bold charging symbol displayed over or next to the battery indicator on the screen of the device? If so, then let it charge a while. A battery at less than 10% charge can take an hour or more to get just 10% higher, and then the charging will move faster.
If you are not seeing the charging indicator, then you could have a bad USB port.
If you connect it to your PC via the USB cable, does the BlackBerry appear to connect?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My iphone 4s suddenly displays images from Yahoo, Google, and Flickr at low resolution. The camera on my phone works fine, but any web related photo content is now pixelated and low res, what's the deal?

My iphone 4s suddenly displays images from Yahoo, Google, and Flickr at a low resolution. I have IOS 7.0.4. My phone camera works fine, but any web based photo content from Safari, Yahoo images, Google images, and Flickr all come in pixelated and low res. What's the deal?

It happened to me but later I figured out that cellular signal was not that great and so the Internet was very slow. It took me about 2 minutes to get the full resolution picuture on either of the app you've described. Try to get faster internet either by wifi or good signal and then check.

Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again.

Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again. I'm in the middle of a project that needs to go live tomorrow. HELP!!! Please.

Photoshop requires 512 Meg of VRAM or more to use the 3D features - that's been the same for version 14 (CC) and now 15 (CC 2014). Check Help->System Info to see how much your card says it has.

How do i change font sizes and colors in ical in OS Lion. Everything is greyed and too small. And how do I changed the color of the scroll bars, which are now invisible?

how do i change font sizes and colors in ical in OS Lion. Since upgrading, all fonts are grey, instead of black, and too small. And how do I changed the color of the scroll bars, which also are grey and almost invisible? And if you can asnwer this, can you tell me how to get back the email format I had before the upgrade? I no longer have column headings and I'd like them. Thank you.

Do you know about changing the font colors for ical, and the color of the scroll bars?
No, I don't. I don't use that program; I fiddled with it just now, and could not find a way to do that.
Perhaps someone else will have an idea.

Please help! Is my IP profile too low and thus red...

Hi all,
My broadband connection seems particularly slow.
Is my IP profile too low and thus reducing my broadband speed?
Greatly appreciate any help here!
If it is the IP profile, how do I get it improved? Contact a moderator?
Here is the result from speedtester.net
Download speedachieved during the test was - 661 Kbps
For your connection, the acceptable range of speeds is 200-1000 Kbps.
Additional Information:
Your DSL Connection Rate :0 Kbps(DOWN-STREAM), 0 Kbps(UP-STREAM)
IP Profile for your line is - 750 Kbps
However here is what my router says:
ADSL line status
Connection information
Line state
Connected
Connection time
1 day, 1:29:10
Downstream
6,848 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
8.1 dB / 26.0 dB
Line attenuation (Down/Up)
27.0 dB / 12.0 dB
Output power (Down/Up)
19.8 dBm / 12.4 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
435241 / 0
CRC Errors (Down/Up)
479 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
135
Solved!
Go to Solution.

just leave your router connected 24/7 for 3/5 days and the profile will come back to normal on it's own
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Screen turns pixelated and crazy colors! WHY?!

Hey, so I've had my MacBook Pro for a while and have never had any problems with it, but recently it's been doing this super weird thing.
When I'm on the internet (I use FireFox) and I go to a page that I need to input a username and password, I use an AddOn called Sxipper that remembers all my stuff for me. So when I'm on the page and Sxipper comes up with the list of my usernames and stuff, it used to just dim the rest of the page. Now, instead of dimming the page, it changes the colors to be all whacky and pixelated and I don't know why or how to fix it.
I've tried uninstalling Sxipper but it still happens on some sites, like sites that have changing ads on the sides (when the ads are changing, they change colors around super fast and then when they are ready to be the new ad the colors go back to normal). It also happens when I'm typing an address into the browser, All my stuff is up to date and I've tried running TechTool to see if there are any problems, but it says everything is fine.
Here are some pictures of what happens so you'll know what I'm talking about:
http://i3.photobucket.com/albums/y59/whathome17/Picture2.png
http://i3.photobucket.com/albums/y59/whathome17/Picture5.png
http://i3.photobucket.com/albums/y59/whathome17/Picture4.png
http://i3.photobucket.com/albums/y59/whathome17/Picture6.png
PLEASE HELP! Thanks.

Hello,
FYI... <When I'm on the internet (I use FireFox) and I go to a page that I need to input a username and password> Why not allow Keychain which is in your Applications/Utilities folder do this for you instead of a 3rd party application...
Also, there's a utility on the net you can download to UNinstall software.. it's called:
AppZapper and available here: http://www.appzapper.com/
Next, get a good disk utility, several here to choose from:
If you don't use one, there are several disk utilities available to use.
Onyx, is free and available here: http://www.versiontracker.com/dyn/moreinfo/macosx/20070&vid=476445&mode=info
or
MacJanitor is good also: http://www.versiontracker.com/dyn/moreinfo/macosx/10491
or
and AppleJack here: http://www.versiontracker.com/dyn/moreinfo/macosx/19596
I suggest downloading from Version Tracker so you can view the Reviews/Customer Feedback and make a decision based on the information provided by users.
Carolyn

Mac • LR - Prints too dark and color not the same

I a real problem where my prints are too dark about 2stops+ and color seem way off .
How can I syc PS & LR so things print the same and the way that they should.
Having to do work a rounds take up space that I can use, the time wast is ________ .
Any and all hepl is welcome
and
Thank you
Ric.

RICHARD RODAMAR wrote:
I a real problem where my prints are too dark about 2stops+ and color seem way off .
How can I syc PS & LR so things print the same and the way that they should.
So, printing an image from PS is OK, but from LR it's dark?
Do both have the same printer ICC profile selected?
Bob

Pixels and colors too low

Similar Messages

Maybe you are looking for