Pixels Out On My Screen!

Hey,
This is really upsetting me. What is happening is a horizontal line of pixels is going completely out. What happened was I was listening to my nano and I shut it off and set it down. Like 20 minuntes later I went back to it and started listening again, I noticed that in a horizontal straight line of pexiels is gone on the screen. It is defintely not a scratch. Anyway, this was annoying but I didn't pay much attention to it because I didn't think fo anything of it. The next day another line went out, that bothered me but I am a trooper and toughed it out. Then again the next a new line went out but the 2nd one went back to normal agin. It keeps changing from day to day, but it is consitently in the same place. This is ridiculous! Can someone please help me?
Thanks,
Nanonymous

This is an issue that requires service.
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.

Similar Messages

Week old Macbook Pro 13" Mid 2010 alread has pixel out

I noticed the other day, I've already got a pixel out on my screen on my week old 13" MacBook Pro Mid 2010. Is there any quick fix to this or am I going to have to call Apple and send in my macbook after I pretty much just got it? Also, am I going to need to back up anything on my macbook before I send it in, or will they even mess with anything except for the screen? Thanks!

I would definitely check the defective product/return policy from where you bought it (if you didn't get it from Apple directly). I know that in the past it has been "acceptable" for a laptop or LCD display to have a couple of dead pixels, and store or manufacturer returns/replacements were only issued if there were a certain number of them (I've seen a minimum of 5 to 9, depending on the manufacturer) could be proven dead.

My iPhone 6 wont come on when home button is pressed and screen pixels out and fades. Any one have fix or same problem?

My iPhone 6 wont come on when home button is pressed and screen pixels out and fades. Any one have fix or same problem?
When I press the home page the screen activates but stays black. I have to press the side button to turn if off then may have to repeat several times to get my phone to come on. Sometimes while using the phone the screen will become pixelly and start to fade away leaving a white screen with vertical line on it. I have to use the close button to make it go away.

If one of the two major buttons of your phone is broken, it is unfair to expect normal operation to be available. The first resolution to any problem involves a usable Home button, as does the second option for resolving any problem. Get your Home button fixed.

CS3 exporting drop outs and red screen flashes when exporting via Media Encoder

Hi forum
I have been using Premiere Pro CS3 for a long time on my dual core PC with no issues. Suddenly, I am now getting a major issue i MUST get sorted asap for a client is waiting for the final video.
It is a HDV (1080i, 25fps) project/timeline. An 8 minute video has been put together in this and every time I try to export as either MPEG2 (Blu Ray) or WMV, I am getting pixelation in certain places usually around certain cuts, or horrible red blocky pixels filling up the screen for a second or two. They seem to come always at the same point. They don't happen when i render the timeline or show up when playing the edit itself in the timeline - just when i playback the exported video in premiere or in Windows Media Player.
To try a workaround I exported the whole video as high quality MPEG2 (blu ray - 30mbps), which I brought into a new sequence, then I exported small sections where this problem was happening as Uncompressed Microsoft AVI and called them "patch 1", "patch 2" etc. and brought them back in and overlayed over where the problems were occuring. The short Uncompressed AVI patches seem to have exported with no glitches, so theoretically I thought I had a clean good timeline in my new sequence made up of the MPEG 2 video overlayed in the dodgy places with uncompressed AVI "patches". However, trying to export a new MPEG 2 master from this has created the same problems, in the same places!!! Still drop outs and still those horrid red flashes filling the screen. Not always as bad, and some places where there were problems are ok, but I am still left with most of the problems still there.
I am now trying to export the whole video as an AVI uncompessed but dont know if this will work and will take a very long time.
I do have Saphire plugins, but they are not being used in this new sequence so therefore could that be a possible problem? I thought perhaps it was the brightness/contrast filter etc so removed that from some of the problem areas, and it helped on some of them, but not on others, so not sure its anything to do with my plug in or filters.
Any help would be greatly appreciated.
thanks, James

This topic is about a year old, but I thought I would reply because I just experienced this problem very recently and stumbled upon an easy solution.
Problem: When using Adobe Media Encoder to create an HD or .m2v video file, a bright red screen will flash followed by a mashup of red blocks/pixels somewhere within the file you've just encoded. This phenomenon lasts for exactly 10 frames before clearing up. Most likely, you won't see this problem until you import the encoded file into Adobe Encore. It shows up on the timeline, the preview monitor and the DVD itself. It occurs on edits that the system reads as being corrupt or when a flash bulb goes off from a still camera. Both instances make the encoding process go haywire.
Solution: Encode your HD or .m2v file with CBR (1-pass) bitrate encoding rather than VBR (2-pass). Don't worry about losing any quality in your video or creating unnecessarily large file sizes with your new renders. I guarantee you won't see much of a difference, if any. I can't explain why this solution works. It just does.
Hope this helps you as much as it did me.

Pixels Out!

I have a ipod touch, and i recently noticed that there are about 4 pixels out. I know they are really really small, but i seems like they are all i notice whenever i use it (especially sense they are near the middle of the screen). Do you think that that is enough a reason to take it back? It just seems like overkill, but it seems like after paying that much for something it should be -nearly- flawless.
And my warranty is almost up so i think it would seem wise to take it back now, before it gets worse.
Thanks

New! Re: wifi connection
Posted: Sep 25, 2008 4:49 PM in response to: grumpy dan Reply Email
Wi_Fi is a huge problem with the Ipod Touch. You have two choices----hope that Apple fixes the problem (and its not just one problem) or return the unit before your 14 day time limit expires.
Mac OS X (10.4.10)

HT3224 I am new to Mac and started transferring data from my PC to my new Macbook Pro. Connection was lost once I started and now my Pro is stuck on the 'Transferring Information' screen. How do I get out of this screen to attempt the connection again?

II am new to Mac and was trying to transfer data from my PC to my new Macbook Pro. The connection was lost however and now my Pro is stuck on the 'Transferring you nformation' screen. How do I get out of this screen so I can attempt the connection again? Is it safe to force shut down of my Mac and will it still prompt me through all the setup process again?

Welcome to Apple Support Communities
If your Mac and PC are connected by Ethernet, unplug and plug that cable again. If not, you have to turn off the MacBook by holding the Power button.
In the next startup, try to transfer your files again. It's important not to interrupt the transfer process, because in most cases, you will stop it and you won't be able to resume it

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen?

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen? Not losing the other screen would be useful as I would like to, for example, monitor my emails whilst watching a video or to work on a project whilst watching an instructional video.
Note : Resizing a window to fill the screen is not acceptable as it still leaves unsightly borders.

bump

How do I get out of full screen in iPhoto ? Can't find a place to click to return to regular size.

How do I get out of full screen mode in iPhoto? The screen will not go back to regular
size, and there is no place to click to do this.

Tap the esc key (top left of your keyboard, or note the arrows extreme top right - moe your mouse up there to see them.
Regards
TD

How to get out of full screen mode in Firefox

Have tried to get out of full screen mode by pressing F11 and f11 and esc but nothing works. any suggestions?

Shift-CMD-F toggles full screen off and on in Fx. Also, if you've put the Full Screen icon in the Firefox Toolbar, bring the mouse cursor up to the top of the screen. This will reveal the toolbar and you can click on the icon to return to normal.
Get the icon from View>Toolbars>Customize. Drag it into the Toolbar somewhere.
Message was edited by: WZZZ

How to get out of full screen mode in Firefox 4?

How to get out of "Full Screen Mode" in firefox 4 ?

Pressing the F11 should do it.

Table Name or Function Module to find out all the Screens & Subscreens for

Hello Experts,
Table Name or Function Module to find out all the Screens & Subscreens for all T-Codes
Helpful Answer will b rewarded
Arif Shaik

Hi Balaji,
But TSTC only Gives the Program Name , T-Code and Screen but not all the Subscreen details
Any other which U know

How to smooth these pixels out...?

How can I smooth the pixels out on the bottom rounded parts of this image?
http://www.themaxidressshop.com/images/awnings.jpg

Hi there,
Here's a video tutorial that show you how to smooth jagged images in under a minute.
Let us know if you have any issues and we can try to help you find a solution. Good luck!

Video out Ipad interface screen

How can I use the iPad to project out the interface screen with the video out cable ? Is there an app I can use to do so ?

This is not an option. VGA out only works within applications, and then only those that support is, like Keynote, NetFlix, a few browsers etc. Safari will not even project, I use Expedition.

How do I get out of "full screen" view. When I put my crusor at the top of the screen I get SOME menus showing, but nothe the "firefox" drop-down where I selected full screed (I was just trying to zoom out, actually)

I think the question pretty well summed it up. I selected full screen mode from the "firefox" drop-down box at the top left, but once in full screen mode, the drop-down box is not available. How do I get back to the standard view??

Press the F11 key to toggle into and out of full screen mode.
Or, move the mouse pointer to the top of the screen and right-click the "+" (new tab) button, or in a blank area of the tab bar, or in a blank area after the address box, and exit full screen mode from the context menu.

How do I switch out of full screen in OS 10.10

I am really frustrated by some of the features in OS 10.10. When I click on the green button in the top left of a window, the window fills the screen. I can't bring up the doc and I lose my menu bar unless I mouse to the top of the screen. Clicking the green button used to just fill the screen with the window but I could still see the menu bar and access the doc. How do I get out of full screen mode (I can't see any button to click that will do that) so that I can see my menu bar all the time and access my dock. Is there a way to turn off this new green button feature and go back to the old way?

Ian Chamandy1 wrote:
... How do I get out of full screen mode (I can't see any button to click that will do that) so that I can see my menu bar all the time ...
esc key.

Pixels Out On My Screen!

Similar Messages

Maybe you are looking for