Pixilation on several channels in one location in home

I'm experiencing intermittent pixilation on several channels at only one location in my home. I have switch the STB with another in my home and the problem still persist in just this one location regardless of the box. I am not experiencing pixilation in any of the other locations in my home. The problem seems to come and go and increase in intensity on occasion. I have rebooted my router and my set top box.

Hi, you need to find both ends its the coax cable its not enough to have disconnected and reconnected at the stb. you should find if the other end of that cable is in the same room or fished through a wall to another room and trace where it goes, probably and hopefully into a splitter. When you find where it goes simply disconnect it and reconnect it very straight, nice and firm. Hand tightness should be fine (yes, this has happened to me and others before, and this should help). If that doesn't help clean up the signal then you may need to replace that cable altogether. Evaluate the job. If its easily replaceable then drop by the store and pick up some rg6 cable (tri or quad shield)
If it's not easily accessible, or replaceable then hit the contact us link at the bottom of the page and see if live chat can help you get a tech. Be sure to tell them that you moved the box to another location and the problem went away, so you know its the cabling for the room that needs attention.

Similar Messages

How can I record several channels of data at different rates with the same card?

I am building an application in which I need to record several channels of DC voltage data to disk at different rates, for example, Channel 1 at 40 Hz, Channels 3-5 at 10 Hz, Channels 6-8 at 1 Hz, etc.
All these channels are time-referenced, so I need to make sure data for channels recorded at slower rates line up with their correct time stamp.
Currently, I am building all data into a 2D array one row per loop iteration.

Hello;
At this time, the NI DAQ boards have only one scan clock, so, you can only define one valid scan rate for all of your channels.
The better approach for you is to sample all channels at the highest rate you will need, and then discard the samples you don't need to save.
Hope this helps.
Filipe

Drill Through to HFM Works for One Location, Not Another - Same Adapter

Good morning all -
I have two locations that both use the same adapter to load to the same HFM application. One location produces the drill through files, one does not.
I've seen several posts about needing separate applications for multiple adapters, but surely this doesn't apply if the adapter is the same? Am I missing a location specific setting somewhere?
Thanks in advance,
Sarah

This was a stupid mistake on my part. I looked through the output and never saw the A, B, C files get produced, so I assumed it never worked. I failed to notice that we had also always had .err files, which prevents drill through files from being created. I answered my own question on the phone with Oracle support. :)
Thanks for your response.

Multiple distribution channels in one shop application possible?

Dear all,
maybe someone can support me with the following requirement:
I have one shop application (SAP CRM ISA 4.0) that shall be used for selling sales products (distribution channel 10) as well as service products (distribution channel 20) at parallel.
The shop is based on one catalog. In this catalog I have two catalog variants - one for each distribution channel.
Problem:
A service product (distribution channel 20) is never released for the sales channel (distribution channel 10).
When having more than one catalog variant the user has to select a certain catalog/catalog variant when logging onto the shop application. By selecting a certain variant only materials can be purchased that are released for the distribution channel defined in the selected catalog variant (same is valid for TREX search).
=> Does anyone know if it is possible to set up a process to sell products of different distribution channels in one shop application out of one product catalog without releasing a material for both distribution channels?
Thanks a lot for you help.
Best Regards,
Rainer Gryschka

You can do this by specifiying the appropriate data load rule to be used by ERPi within Integration Option 1 in the location. This will kick off the data load rule you specify in ERPi that should be tied to the corresponding set of books in EBS.

How I can include several sequences in one sequence file?

I am new for teststand and forgive me if my question seems silly.
How I can include several sequences in one sequence file? I would like to use " call sequence" in current file.
thanks a lot for your kind help

Hey gunking,
If you'd like to find out more information about our training courses, I'd be happy to speak with you further about what the course contains and locations offered, but it's probably best if we take this off of the forums for further conversation via phone or email.
Create a new support request at www.ni.com/contact and set the product as TestStand. You will be directed to myself or another engineer on my team, at which point you can ask for me or just speak with one of my teammates.
Off the top of my head, I do know that there are a few courses coming up in Austin in the next couple of weeks (I'm teaching one myself), if you're interested in those. Otherwise, courses are always being added for the future.
Derrick S.
Product Manager
NI DIAdem
National Instruments

Can Prelude preview and independently work with several clips at one time?

I would like to be able to view several clips at one time, being able to scrub to various locations and then move to another clip and do likewise while being able to see all on the screen at one time. I can almost do this in Premiere Pro buy selecting clips in a bin in icon view and increasing their size - but, the big drawback is when I leave one clip to scrub another, the clip I left moves to another frame on its own so is not dependable or useful for the visualizations I want to do.

Thanks Ken for your great suggestion!
If you want to change the poster frame of clips in Icon view in Premiere you can use Shift / Command+P, however, Prelude does not support that, but we could consider to make it in Prelude in the future. Thanks again!

How to do averaging N samples for several channels?

Dear members,
I got the Routine for averaging N Samples from One channel's data from the forum. I would like to
do for several channels. How to go about it?
Regards,
G.Kousalya

You can do it in a way that is very similar to the approach you would use for a single value (see attachment).
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
example.vi ‏38 KB

Open and close communication channel in one link

Hello,
I implement with successful the scenario that described in this blog:
Control Communication Channels Externally without using RWB
Right now I use with this link to start the CC
http://aaaa:50000/AdapterFramework/ChannelAdminServlet?party=*&service=Open_Friday_Service_Sender&channel=Open_Friday_Sender&action=start
And with this link to stop the CC
http://aaaa:50000/AdapterFramework/ChannelAdminServlet?party=*&service=Open_Friday_Service_Sender&channel=Open_Friday_Sender&action=stop
I looking for the way to start and stop the communication channel in one link.
Elad

hi elan
i think you need to write an abap program and schedule it..
abap program will call this HTTP link as The URL has no dependency on where it is called.
regards
kummari

How to copy file from one location to another

Hi,
I am new to java, I tried the following code to move the file from one location to another
public class CopyFiles {
public String copy ( File source, File target)
throws IOException {
FileChannel sourceChannel = null;
FileChannel targetChannel =null;
try {
sourceChannel =new FileInputStream(source).getChannel();
targetChannel= new FileOutputStream(target).getChannel();
targetChannel.transferFrom(sourceChannel, 0,
sourceChannel.size());
finally {
targetChannel.close();
sourceChannel.close();
return "Success";
public static void main(String [] args) throws Exception{
File source = new File("C:\\users\\download.pdf");
File destinationFile = new File("C:\\apple\\download.pdf");
copy(source, destinationFile);
The above code is working perfectly, but I Don't want to include the file name in destination file. i.e. File destinationFile=new File("C:\\apple"), and at the same time the pdf with same name has to get stored in the destination location, how can I achieve this.

kameshb wrote:
I Don't want to include the file name in destination file. i.e. File destinationFile=new File("C:\\apple"), and at the same time the pdf with same name has to get stored in the destination location, how can I achieve this.It's not totally clear what you're saying here, but what I think you mean is that you don't want to explicitly set the destination file name--you want to just give the copy the same name as the original. Yes?
If that's the case, then break the original up into separate directory and file name portions, and then construct the destination path from the destination directory plus original file name. You can do that by manipulating the full path string, or by using the methods in java.io.File.

Copy File from One Location to Another Location through xcopy or any

Hi,
I Need to copy one file from one location to another location. That file need to save in C:\Windows\System32 folder
I need to create one .bat file and i want apply that bat as a startup script through GPO.
I tried through XCopy if i test in machine that is working. If i tried in other machine that is not working. becoz of some Credential issue
I tried in the script by netuse command after that my script itself not working.
SET username=XYZ\Administrator
SET password=abcd
@ECHO OFF
cmd "cd C:\"
net use "\\10.50.5.68\c$\Windows\System32" %password% /user:domain\%username%
:copy
Xcopy /S /I /E D:\DLL \\10.50.5.68\c$\Windows\System32
Regards, Hari Prasad.D

You cannot do that in a startup script. You do not need to do that in a startup script.
To add files to the system use GP Preferences.
On Window 7 and later only the Trussted Installer is allowed to add files. (That means only Microsoft.)
No programs or users should ever alter files in the system area.
¯\_(ツ)_/¯

How do I make one location for all iTunes music?

I have music stored in two locations, an external HD and some internally on my MacBook HD. I recently upgraded to a larger internal HD and want to move the music that is stored externally back onto the internal drive. What is the easiest way to do this, so that it is all in one folder in one location?
Many thanks!

Thank you. I've done that and it saved to my external drive. I have tried to copy my iTunes folder from the external HD to my Mac HD and i get the error: You can’t copy “iTunes” because it has the same name as another item on the destination volume, and that volume doesn’t distinguish between upper- and lowercase letters in filenames, which makes no sense to me.

HT204053 I purchased several apps using one Apple ID. Now I want to change my Apple ID. Will I lose anything?

I purchased several apps using one Apple ID. Now I want to change my Apple ID. Will I lose anything?

You won't lose anything, however all purchases are permanently tied to the ID used to purchase them originally so future updates of your existing apps will still require the password for your old ID (whether you are still using it for purchasing or not.

I would llike to place all my content in one location and view, use or share it on my Apple devices as needed. What would be the best way to set that arrangement up?

I would like to place all my content in one location and share and move it as needed to my various apple devices. What's the best way to do it?

Hi,
I would suggest that is going to be an involved and complex process.
I would personally look into some of the invoicing and time scheduling software available and see if any fit your needs.
Take a look here: http://www.tuaw.com/2008/07/30/app-roundup-timekeeping-and-billing/
and here: http://www.tuaw.com/2008/07/31/app-roundup-timekeeping-and-billing-part-ii-the-q uickening/
for starters.
Best wishes
John M

How do I share several contacts from one iCloud account to another?

How do I share several contacts from one iCloud account to another iCloud account?

Hi charlesfromlymington,
Welcome to the Apple Support Communities!
I understand that you would like to share a contact. Please use the information in the iOS 8 iPhone User Guide (page 139) for information on this process. When the recipient receives the contact, if iCloud Contacts are enabled, it will be added to their Contacts.
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Share a contact. Tap a contact, then tap Share Contact. See Share from apps on page 35.
Cheers,
Joe

HT5538 how can I transfer several apps from one Apple ID to another?

How can I transfer several apps from one Apple ID to another?

Apps purchased by an Apple ID are forever associated with that ID. Purchases can't be transfers to another Apple ID.

Pixilation on several channels in one location in home

Similar Messages

Maybe you are looking for