Pixma 410 will not fax or scan when out of black ink?
I ran out of black ink. I just wanted to fax and or scan something and it won't let me past the "check black ink message"Is it not possible to scan or fax if you run out of ink?
Hello. The unit would not be able to send faxes while an ink cartridge is empty. This is because fax reports or fax error reports would not be able to be printed. To scan while a cartridge is empty, hold down the STOP button for about 5-7 seconds. This should temporarily clear the empty warning and allow you to scan. This didn't answer your question or issue? Find more help at Contact Us.
Similar Messages
-
HP Officejet Pro 8600 Premium will not copy or scan.
Hello,
I have a HP Officejet Pro 8600 Premium that prints just fine however it will not copy or scan. When I attempt to copy a document it displays Starting Copy... on the printer but will not copy and must be turned off and on to use the printer again. When I attempt to scan it brings up an error box telling me to check all of my network connections.
I have already tried the services.msi fix and have ran hp printer and scannor doctor tool to attempt to fix my problem.
In the services.msi I found that all services dependant on (WIA) were already running and set to automatic.
The scan doctor found that It wasn't communicating with the drivers, which I then reinstalled, and restarted the computer. It then continued to have problems with the drivers and asked me to contact support.
Thank you for your time.
edit: The printer is also running the latest firmware and I have also checked my anti-virus firewall so that it is allowing the printer through network. (note: in attempt to fix the issue i have both a usb and network connection trying to get either connection to work).Hi-
To make sure I understand this correctly, you are unable to do a copy at the device itself? This should function without the device being connected to a PC at all. if this is indeed the case, it sounds as if this is a hardware issue. I would then check with HP support on your product for warranty repair.
I am an HP employee, however, this content reflects my personal opinion and is in no way associated with HP. -
HP LaserJet 1536dnf MFP will not copy or scan but does print
My HP LaserJet 1536dnf MFP will not copy or scan but does print. It does not matter if I use the ADF or the glass. When copying or scanning I get a completey black page. The light bar does move from one end of the printer glass to the other. There are no connectivity issues as the printing function and the e-print function work fine.
Thank you for your helpHi @akb3,
I understand that when you try to scan or copy, you are getting a black page. I can help you with this.
Please keep the scanner lid open and then press the copy button.
Check if the scanner bulb glows.
Check if the scanner moves freely across the glass.
If it does not try connecting the printer directly to the wall jack and try again.
Update the printer's firmware if the bulb glows and scanner moves freely. HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
If the issue persists, then I would recommend to call HP Tech Support for further assistance to see what other options are available for you at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Contact HP Worldwide.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
App will not download to iPad when purchased from App Store - stuck with Cloud icon
Device : iPad Air 32gb wi-fi model (not cellular data)
OS version : 7.1.1 (up to date)
Location : UK
Problem : App will not download to iPad when purchased from App Store - stuck with Cloud icon
Last night I tried to download an app over wi-fi onto my iPad Air, but the app did not install.
I have plenty of space (the app is 24.1mb, I have 3.4gb free space) and there are no restrictions whatsoever on my iPad - no blocks on App store purchases, no age-related restrictions, no country restrictions etc.
Normally from the App Store page you would tap the price (in this case the app was free), enter your iTunes password, and the app would download.
Also a new icon appears on the home screen and a circle shows the progress of the download.
However this did not happen.
Instead I have the Cloud icon (the one that shows when you have bought an app but it is not currently installed on your device) and a message that says "You've already purchased this, so it will be downloaded now at no additional cost".
If I press OK I am then prompted to enter my iTunes password, the Cloud symbol briefly changes to a circle (and I mean for a split-second, like the blink of an eye) and then the Cloud symbol appears again.
The app does not download - in fact it does not even *attempt* to download.
I have tried this >20 times now and it always occurs excatly like this.
After Googling this problem (which seems common) and reading over a dozen threads on this forum plus Apple's own official support pages, this is what I've tried:
I can re-download other apps that I have previously purchased on this iPad, with no problems.
I purchased another app on my iPhone 5 and was then able to download onto my iPad with no problems.
I have reset my iPad >5 times - both by pressing/holding the home/power buttons, and also a full switch off and restart.
I have logged out of my iTunes account on the iPad, and logged back in.
The wi-fi is Virgin Media fibre optic broadband with a verified speed of 20 meg (confirmed by Speedtest) plus an 802.11-n Belkin router and my iPad will happily load web pages, stream videos on YouTube, download other apps etc.
I have reset/rebooted my internet connection
In an attempt to eliminate by broadband connection from the possible causes, I have switched off my router, linked my iPad to the hotspot feature on my iPhone and tried to download the app over cellular data, but still cannot download the app.
I have tried on 2 other wi-fi networks but still cannot download this one app.
My iTunes account has a cerdit balance from an iTunes card, but the app was free anyway
Nothing I try will download the app in question.
The app is iPad only, so I cannot install on my iPhone to try and kick-start the process.
I guess I could install the app on my computer and then sync the iPad, but that's *working around* the problem - it's not *fixing* the problem.
(Since getting the iPad I use almost never use my computer. And anyway what if I did not have a computer? Didn't iOS go "PC-free" with version 5?)
I would like to call Apple but my 90-day telephone support has expired (the iPad is around 6 months old) and I don't want to buy Apple Care for this one problem.
I can't make it to an Apple Store to speak to a Genius.
Bearing in mind the list of things I've already tried, what do I do next?
Thanks in advance for any support.Hi there.
Thank you very much for your quick reply, it's really appreciated.
No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
I guess I need to fire up my PC and download it / sync my iPad.
Thanks again for your help -
How do I sync my iPhone 5 to my new PC? iTunes will not recognize it even when plugged in the USB port. Settings>General>iTunes wifi sync is still my old laptop. Any help is appreciated.
See also Recover your iTunes library from your iPod or iOS device.
tt2 -
My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.
Likely this:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Officejet 6100 - H611a Will not print in grayscale when color cartridge is depleted.
The title says it all. - Windows 7 64-bit
Officejet 6100 - H611a Will not print in grayscale when color cartridge is depleted!
Even though the documentation that came with the printer says it will. After 2+ hours on the phone with HP support over the course of 2 days, I have been informed that printer WILL NOT print in black ink only if a color cartridge is empty.
I thought anyone who purchases this model should know the documents included lie.
From page 31 of the Officejet 6100 user manual: "If a color cartridge is depleted, the printer will print in grayscale using the black cartridge." LIES!
The HP Help Programs says the same thing.
I have hard-reset the printer, removed and reinserted all the cartridges, set the options to "black ink only," Nothing worked. 3 HP reps all said the same thing, "You have to get a new magenta cartridge."
Will be retuning for a refund as I purchased this model SPECIFICALLY because the manual said it would print the grayscale without color ink present.
Have had 4 HP printers over the years, never even considered buying anything except HP. This will be my last HP printer. Extremely disappointed by HP's deception.Sorry the printer did not perform as expected. I have escalated this in an effort to get this to the right people.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help
Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPhone 4 will not power on. When connected to iTunes via my computer, it is recognized and shows fully charged battery. Pressing and holding the sleep/wake button does nothing; just a black screen. Any suggestions?
Only way is to bring it to the Apple Store and use the warranty if it hasn't expired
-
i have the iphone 3gs and ive dropped it a few times. when i press the home and lock button, it will not turn on, but when i plug it in, it says in big font IOS 6 and when i slide it open it says connect to itunes or emergency call. it wont turn on when i plug it in to my pc. tips?
roush12345 wrote:
i ... it wont turn on when i plug it in to my pc.
Place the Device into Recovery mode... All data / Content will be Erased.
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
But... if the Device has been Modified... this will Not necessarily work -
iPhoto will not open with pictures when I click on the icon. It does show that it is open on top toolbar. What happened to my photos?
Did you run any updaters recently, i.e. like just before this happened? Try this first fix: make a duplicate copy of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache file,, Cache.dbt, that is located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences..
OT -
My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?
Tried that and it still isn't working. Not sure if it's software thing but I just noticed when I swipe up my control center the flashlight option is not available as well. I'm not sure why this is. I have a 5s with the newest software. That's for the suggestion
-
My iPhone 4 will not turn on. When I plug it into Itunes it says it is n recovery mode. I try to restore it and the error code code 3194. I have tried all the steps what now?
It is usually given as a communication error between Apple, iTunes (your computer), iPhone. Somewhere they are not communicating, so the iOS you are trying to install cannot be approved by Apple. Trouble shooting steps include, making sure you have Current iTunes installed, make sure your Hosts file of computer is not blocking Apple. Try restoring on another computer.
-
after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.
The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.
Maybe you are looking for
-
Wireless outage (IP only) for 5 minutes, every 15 minutes
Hey everyone, I recently moved to the UK from the US, and in the process gave up my Airport Base Station for the much less friendly BT Home Hub. Since doing so, I have been having some very annoying problems with the wireless connection that I did no
-
Ipod not recognized in itunes, stuck in recovery mode (tried everything)
I've had my ipod touch for about a year now, and the other day itunes told me I needed to download the new software and such. FYI, I use Vista (unfortunately. Probably not helping with the problem). I am aware that this is a common problem. I have *t
-
Use PI as "Application System" instaed of "Integration Server"
All, i have quite complicated scenario in which: message is sent ECC > XI, this mesage triggered number of sub-interfaces XI>OraDB (via jdbc), each sub-interface activate DB stored procedure (which returns large data volumes). all returned data shoul
-
CR 2013 crashes every time when removing a Subreport
Version 14.1.1.1036 Added a couple of sub-reports now, and they cannot be removed without CR crashing with no specific error.
-
Simultaneous Analog Acquisitions
Hello, I use a PCMCIA card DAQ-6062E and LabView 6.1 to simultaneously acquire 2 analog signals whose amplitudes are different (one varies between -0.01 and +0.01V, the other between -2.0 and +2.0V). I use two AI Config VIs, two AI Start and two AI R