Pixma 870 prints but sheet is blank.

Pixma 870 passes cleaning test, and printer activates when "print" command is sent but paper is blank.  No erroe msg.

Hello JBwvu64,
To have a better understanding of your issue, please let everyone know some basic facts regarding your PIXMA MX870 and computer setup.  For example, what operating system do you have installed on your computer, and how does the PIXMA MX870 connect to your computer?  Once we have more information, our Canon Forum members and our Subject Matter Experts will be able to assist you with suggestions appropriate for your specific issue.
Thanks!

Similar Messages

  • Printer deliveres 2 sheets. The first is printed, the second is blank

    Greetings,
    I have a 2007 HP LaserJet M1319fMFP multa purpose printer.  It has been in storage for a while but is clean.  Every thing works except this problem.   It will be used as a stand alone printer in a church minestry.   It now is connected to a laptop running windows 7.  I downloaded all available downloads from HP for this printer and installed them.  This did not help.
    The problem is that when it is suppose to print 1 sheet , it in fact prints that sheet , cycles and feeds through a blank sheet.
    This is done on all types of printing.( test page, reports-menu structure and from the copy function) 
    This happens every time it prints.  I have done all of the suggested things to fix it and same problem every time.
    Thanks for your time.  I appreciate your help.
    Regards,
    w-bar

    Hi @w-bar ,
    I understand that you are having issues when printing a document or standalone test pages, a second blank sheet always follows. I will certainly do my best to help you.
    Since you are having this issue also when printing the self test, I would update the printer's firmware. HP LaserJet M1319f Multifunction Printer Drivers. Select your operating system, click next, click the link for firmware.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Hard Reset: Power on/Power off (verify LED) Power cycle unit by switching the power switch off, wait for 10 seconds, then power on.
    Please check your private messages for additional steps to try.
    In the forum beside your handle name just click on the envelope to view it.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • In Numbers, I copied a worksheet and deleted the contents. The sheet I copied from has a header, I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete it?

    In Numbers, I copied a worksheet and deleted the contents. The sheet I copied has a header.  I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete the header?

    Hi Cristina,
    Headers are not shown in normal view.
    Menu > File > Print to open Print View.
    Hover the cursor over the Header to see the outline. Click and delete.
    Regards,
    Ian.

  • I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

    I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

    Thank you everyone. I figured it out. I thought that you can use regular paper to print pictures from photos on Ipad. This is not possible. I was able to use regular print paper to print from my mail. My problem is solved!! 

  • HP Deskjet 5740 Printer acts like it's printing, but blank pages come out.

    I have an HP Deskjet 5740 printer. It has worked until recently and now when I try to print it won't out of any applications. It acts like it's printing, but pages come out blank. When I do a test it works or when I try on my work mac it works as well. So I know it's not a printer problem or USB cord. I have tried to reinstall the driver and also to "repair disk permissions," but to no avail. Thanks for your help!

    Take out one of the cartridges and make sure you pulled off the tape covering the head and pin hole. I haven't dealt with Epson printers for a while but I remember buying cartridges for one of my printers that the tape always seemed to peel off leaving the hole plugged.
    If this isn't the problem then it boils down to two things: bad cartridges or printer problems. Different printers are susceptible to two different problems; dried ink in the ink lines and air bubbles. You can try cleaning again and again, using the power cleaning mode if Epson offers that. This wastes ink but you have little choice if you want to resurrect the printer. If this doesn't work try returning the cartridges for a refund and see if that works.
    Three simple rules tend to keep inkjet printer problems at bay: print something at least once a week. This will keep the ink from drying out. When the printer tells you ink has run out get a new cartridge. This will reduce the chances of getting an air bubble in the line. Buy ink only from reputable vendors and don't fill your own.

  • TS3999 How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    Select the day. then look on the bottom left where you will see the word, TODAY, select it then select print frame.

  • I thought I had  Adobe stuff.  I am not computer saavy at all, so I need to speak to someone who can guide me through this situation.  I thought I had an Adobe PDF File, but I guess not.  When I went to print taxes, the blank forms printed, but no the tax

    I thought I had Adobe stuff.  I am not computer savvy at all, so I need to speak to someone who can guide me through this situation.  I thought I had an Adobe PDF File, but I guess not.  When I went to print taxes, the blank forms printed, but no tax information I typed in. Please have someone call me.  My number is (909) 864-1150.  Thank you.

    Hello Bill,
    You can seek help from Adobe customer care for the same.
    Contact Customer Care
    Regards,
    Anubha

  • My Dell Inspiron 1525 is USB connected to my Canon Pixma MX 392 printer, but is "not detecting".

    My Dell Inspiron 1525 laptop is USB connected to my Canon Pixma MX392 multifunction printer. Though the
    printer is functioning properly in all respects, a message is showing that my laptop "cannot detect" the printer.
    At the same time I'm receiving a message (wizard?) "Found New Hardware - Windows Needs to Install Driver
    Software for Your Universal Serial Bus (USB) Controller". My Printer folder shows my Canon is "ready",
    and the Port is shown as "USB..Virtual printer port for Canon MX390 series Printer". My Device Manager
    folder lists the Canon printer and fax under "Printers", and under "Universal Serial Bus (USB) Controllers"
    are listed: MX390 series (1 time); Universal Serial Bus (USB) Controller (7 times); Unknown device (7 times);
    USB Printing Support (2 times). I've tried unistalling and re- installing everything associated with the printer,
    but get the same results. As I've stated the printer is functioning fine, but the "incessant" appearing of the
    message, "Found New Hardware, etc." is extremely annoying. When I follow the "wizard's" instructions to,
    "locate and install driver software (recommended)", I'm finally told to" insert the disc that came with your Universal Serial Bus (USB) Controller". I don't have any discs that came with either the printer or laptop. Is
    anyone able to make any sense of this...and, hopefully, offer help in getting rid of the "Found New Hardware"
    message. Many thanks!

    I'm not sure the error is related to your printer.
    http://www.tomshardware.com/s/install+driver+universal+serial+bus+usb+controller/
    Have you tried going to the Windows Update software program and seeing if there are any udates related to your message?
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • PIXMA MX479 printer is connected to network but network will not recognize printer

    I replaced my HP wireless printer with a CANON PIXMA MX479 printer.  It is connected to my network and installed on my computer, however the network will not recognze the printer, thus my printer will not repsond to my computer and I cannot print

    Hi Cc52!
    So that the Community can help you better, we will need to know exactly which operating system is running on your computer. Any other details you'd like to give will help the Community better understand your issue!
    If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
    Thanks and have a great day!

  • I've added caption information to my files, but not all the information prints when I try to print contact sheets.  Please advise.

    I've added caption information to my files and when I go to print contact sheets, not all of the caption information will print.  Is there some limit on information for captions?  I've added several lines of information.  Thanks for your assistance.
    Regards,
    Alan

    HI Leonie,
    Thanks for the input.  I checked it out and you are correct in that only 3 lines of information can be printed.  I've adjusted my information for 3 line s and it works.
    Thanks for your help.
    Regards,
    Alan

  • HP Laserjet 2600xi new drivers prints garbage spits out blanks

    A friend called me about this problem and all I knew to do was to get the latest drivers and install them after removing all traces of old HP software. They're using an eMac with OS 10.4.11. The problem may have a simple solution. When they send a file to print, at first there is a page of 'garbage' printed followed by the printer just 'spitting out' blank sheets until they turn it off.
    Any ideas to try? It could be a corrupt spool folder I suppose but don't know where to look for the file.
    Thanks

    Thanks, Greg. You are right that the 2600xi is Photosmart rather than Laserjet. I was just passing on the info given me by the owner who is frankly clueless. He asked my advice because I'm somewhat more experienced. I don't know how the rpinter was added to the Print & Fax pref pane.
    As far as using the HP drivers I've gotten them to install new ones and had them look to see if the printer was recognized in the Printer Setup Utility.app. It was and that's the last time I talked to them. I may have to go and make a house call. Thanks for your information and advice. I'll get back with any update.

  • I have a PIXMA MP970 printer. The printer is not printing. What should I do?

    My PIXMA MP970 printer has stopped printing and copying. At first the printer would not even turn on, now it does. The paper does feed thru, but comes out blank. There is plenty of ink in all the cartridges. I'm at a loss as to what is wrong.

    Hi teachermoe,
    Since no ink is printing on the page, we recommend performing at least one cleaning and two deep cleanings on the printer to try and get the ink to print.  To perform the cleanings, please follow the steps located at the link below:
    Performing Print Head Cleanings
    If the ink still does not appear on the page, the printer will require servicing.  Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Cannot print from the web although everything else prints ok - when asked to print I get one blank page then nothing

    I cannot print from the Web all else prints OK the printer throws out a plain sheet of paper and the print preview is blank
    == This happened ==
    Every time Firefox opened
    == about six weeks

    Try This!
    1) Go to Print Preview
    2) Print
    3) Name: HP PSC 2100 series (depend on your printer)
    4) Properties...
    5) Paper size: letter
    6) Change to Paper size: A6
    7) OK
    8) Repeat step 4 again
    9) Change back again Paper size: letter
    10) OK
    11) Don't print, but go back to Print Preview again and see if it works
    This is the one that have work for me after trying several times modifying about:config with no success. Good luck and hope that will help.

  • Power View can only print one sheet at a time with Power BI Mobile Apps

    I have PowerView for Excel 2013 on Power BI Preview. I have 2 reports sheet and 2 hidden data sheets on Excel.
    I'm getting error on Mobile Application in Windows 8 RT tablet.
    I should see 4 reports in preview page, but I see 2 correct reports and 2 errors.
    Power View can only print one sheet at a time. Please switch to the desired sheet and try again.
    Why this occurs? What should done in Excel?
    Kenny_I

    Thank you for reporting this issue. This is a known issue that we had fixed last week. In a few days, the updated version of the app will be available in the Windows store. At that time, your app should automatically get updated to the newest version, if
    you have not changed your default settings.
    If you still experience issues next week this time, please post back and perhaps share your workbook, so we can do a thorough investigation.
    Thank you.

  • Printing Contact Sheets

    Hello
    I am trying to print a 4.5 x 5.75 contact sheet of 8 images, which I have saved as a preset. I have printed this many times in the past but this time I am getting a error message (which appears in the print dialog box too quickly for me to read.)
    Anyways it seems to be isolated to printing contact sheets. If I try to print a single image from Aperture there is no problem. I have tried rebuilding my Aperture library, tried rebooting, but don't know what else to try?
    Any suggestions?
    Thanks for the help.
    Shane

    Miklos:
    One poster pointed out that you could create a book using the Year Book theme. There you can select to have anywhere from 1 to 32 images per page and include the file names underneath the photos if desired. Then print the book to PDF and then print each page to hardcopy. Don't know if that will reduce your overall assembly time but you will be able to have the file names or titles printed also.
    Another way is to create an html gallery, display in Safari and then print. Here's how:
    Creating Contact Sheet with Titles
    1 - Put the files you want to print in an album and arrange in the order you'd like.
    2 - Go to the File->Export->Web Page menu option.
    3 - While in the Web page window, select the number of thumbnails you'd like across each page (iPhoto will keep you informed on how many pages it will take).
    4 - Click on Show Title under thumbnails and click on Export. Then select the location where you'd like the resulting files to be saved (create a temporary folder to contain them).
    5 - Once saved, go the folder and open the index.html file with your browser. You will get a page with your thumbnails and titles beneath them.
    6 - Print that browser page and you've got your contact sheet with file names (or comments if desired).
    If you want more control over the thumbnail gallery, try using BetterHTMLExport or Galerie
    Good luck.

Maybe you are looking for