PIXMA 922 Unable to pick up paper from lower tray

I recently purchased the PIXMA 922 and have been having issues printing.  I have put standard Staples copy paper in the lower tray.  When I go to print it will sometimes print a page or two, then it gives me "Support Code 1008" error saying there is no paper.  I have to open the lower tray, readjust the paper a bit, hit ok.  At that point its about a 40% chance of printing another page or two, otherwise it thinks again and then gives the same error.  It makes it almost impossible to print anything more then a couple pages since every few pages is spending a few minutes going back and forth with the printer.  Did I get a lemon?  Is there something I missed that would make it so the printer can't pick up the paper?  Before I return the printer I wanted to try to get some assistance.
Thanks!
Solved!
Go to Solution.

Hi KevinG and KimApollo,
Please remove the paper tray and ensure that the paper guides are fitting snug around the paper so that it does not have any wiggle room in the tray, then replace the tray in the printer.  Next, please perform a roller cleaning on the unit by following the steps at the link below:
PIXMA MX922 Roller Cleaning
If you still experience difficulty after performing at least three roller cleanings on the unit, the printer will require servicing.  Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Support Code 1007 printer will not feed paper from lower tray!

    PIXMA MG5422 will not feed paper from lower tray. Wifi connect Mac OS X 10.9.4

    I have the same problem with my Canon MG7120 and it's SUPREMELY annoying. I have a iMac running 10.10.4 and am also trying to use iPhones. The printer has no option to print from the lower tray if it sees any color or any odd size page. Anything from the iPhone will be treated the same, rendering it completely useless. I love Canon printers, have had many in the past, but this one is really really annoying. 

  • MX 925 - how to force the printer to use paper from lower tray

    Hi' there,
    Several people seems to have the problem, that the printer "wants" to print from the upper tray, - I assume it's because it want's photo paper. Is it possible to FORCE the printer to use paper from the lower tray, when e.g. you have no photo paper, receive the error message, and just want to see the print?
    :-) Sogge

    I found a methoid that while clumsy, works. I have defined another printer on my windows machine that points to the same
    printer as my original printer defination. I have named this printer "Legal" and has defined legal paper as it's default. When
    I print to this printer( DECTYPE, DECNAME) it now defaults to legal.

  • B2b unable to pick the file from xml gateway

    Hi All,
    I am taking a scenario where B2B picks the files from xml gateway and drop the files in FTP folder. I modified the XML gateway inbound and outbound, i has given my user credentials(unmae, host ,pwd ,sid, port). In agreement in the place of internal delivery channel i has given XML gateway outbound.
    Still its unable to pick the files from xml gateway.
    Clarify my understanding please
    While b2b picks the files from xml gateway, It will pick from ECX_Inbound or ECX_Outbound?
    Here i am attaching the logs:
    2010.01.15 at 07:32:51:101: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
    2010.01.15 at 07:32:56:366: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
    2010.01.15 at 07:32:56:369: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
    2010.01.15 at 07:32:56:392: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
    2010.01.15 at 07:32:56:395: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
    2010.01.15 at 07:32:56:547: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
    2010.01.15 at 07:32:56:821: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
    2010.01.15 at 07:32:56:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
    2010.01.15 at 07:32:56:826: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
    2010.01.15 at 07:32:56:829: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
    2010.01.15 at 07:32:56:832: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
    2010.01.15 at 07:32:56:835: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
    2010.01.15 at 07:32:56:837: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
    2010.01.15 at 07:32:56:840: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
    2010.01.15 at 07:32:56:842: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
    2010.01.15 at 07:32:56:845: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
    2010.01.15 at 07:32:56:848: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over Internet
    2010.01.15 at 07:32:56:851: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
    2010.01.15 at 07:32:56:853: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
    2010.01.15 at 07:32:56:856: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
    2010.01.15 at 07:32:57:649: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
    2010.01.15 at 07:32:57:785: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
    2010.01.15 at 07:32:58:077: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
    2010.01.15 at 07:32:58:824: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
    2010.01.15 at 07:32:58:827: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
    2010.01.15 at 07:32:58:831: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
    2010.01.15 at 07:32:58:891: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
    2010.01.15 at 07:32:59:010: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
    2010.01.15 at 07:32:59:013: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
    2010.01.15 at 07:32:59:038: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
    2010.01.15 at 07:32:59:041: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
    2010.01.15 at 07:32:59:043: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
    2010.01.15 at 07:32:59:046: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
    2010.01.15 at 07:32:59:059: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
    2010.01.15 at 07:32:59:294: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
    2010.01.15 at 07:32:59:297: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: No Archive dir
    2010.01.15 at 07:32:59:300: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: marker :false
    2010.01.15 at 07:32:59:314: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO
    2010.01.15 at 07:32:59:322: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO file.receiver.wallet_location = /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
    file.receiver.wallet_password = *****
    file.receiver.polling_interval = 5
    file.receiver.path = /ftpdata/elshad1/ice/infile/850/PO
    file.receiver.marker = false
    marker = false
    ccc = false
    file.receiver.channel_mask = None
    file.receiver.minimum_age = 0
    filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
    file.receiver.van = false
    file.sender.channel_mask = None
    file.receiver.user = eiced1
    PROTOCOL_ENDPOINT = null
    file.receiver.password = *****
    file.receiver.preserve_filename = false
    transport_callout_waittime = 30
    preserve_filename = false
    file.receiver.ccc = false
    van = false
    polling_interval = 5
    2010.01.15 at 07:32:59:491: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Robin_FTP_TransportServer < ftp > < Emerson >]
    2010.01.15 at 07:32:59:858: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
    2010.01.15 at 07:32:59:864: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
    2010.01.15 at 07:32:59:949: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Outbound - initialize
    2010.01.15 at 07:32:59:953: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Obtaining outbound connection...
    2010.01.15 at 07:32:59:956: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
    2010.01.15 at 07:32:59:960: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound username: apps
    2010.01.15 at 07:33:04:319: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:33:04 GMT+00:00 2010 Outbound - initialize exit
    2010.01.15 at 07:33:04:322: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
    2010.01.15 at 07:33:04:326: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
    2010.01.15 at 07:33:04:329: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
    2010.01.15 at 07:33:04:332: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
    2010.01.15 at 07:33:04:335: B2BStarter thread: B2B8:15:32:157: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:32 GMT+00:00 2010 inbound username: apps
    2010.01.15 at 08:15:33:757: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 inbound initialize exit
    2010.01.15 at 08:15:33:761: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Outbound - initialize
    2010.01.15 at 08:15:33:764: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Obtaining outbound connection...
    2010.01.15 at 08:15:33:767: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
    2010.01.15 at 08:15:33:770: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound username: apps
    2010.01.15 at 08:15:34:473: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:34 GMT+00:00 2010 Outbound - initialize exit
    2010.01.15 at 08:15:34:476: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
    2010.01.15 at 08:15:34:479: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
    2010.01.15 at 08:15:34:481: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
    2010.01.15 at 08:15:34:484: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
    2010.01.15 at 08:15:34:487: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
    2010.01.15 at 08:15:35:928: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
    2010.01.15 at 08:15:36:132: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
    2010.01.15 at 08:15:36:139: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
    regards
    cnu

    Anuj,
    The log which i placed on top, thats the complete log and DC log is given below
    2010.01.18 at 12:58:06:117: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:11:130: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:16:143: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:21:153: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:26:169: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:31:164: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:36:173: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:41:182: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:46:194: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:51:210: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:56:217: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:01:244: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:06:254: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:11:256: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:16:283: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:21:276: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:26:285: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:31:297: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:36:314: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:41:324: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:46:327: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:51:341: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:56:352: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 13:00:01:359: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered

  • 930c Won't pick up paper from tray

    Hello,
    My Deskjet 903c won't pick up the paper from the tray. Help?
    Thank you.
    Dan

    Dan,
    I have a different model, but the same problem. Here is a link I found that fixed my problem, complete with video how to. You might be able to find a similiar link for yours.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02036357&tmp_task=solveCategory&lc=en&dlc=en&cc...
    Tom

  • HP Photosmart C5180 Will no longer feed 8x11 Photo paper from main tray

    My C5180 all in one will no longer feed 8x11 photo paper from main tray.  Rollers slip and will not pull paper in. Any suggestions? 
    583seve

    Hi @583seve 
    I see youa re having some difficulty with your Photosmart C5180. The following document addresses both out of paper messages and issues with paper pick; 'Out of Paper' Error Message Displays and the Product Does Not Pick Up or Feed Paper.
    If the issue persists, you might consider trying the steps in a paper jam document. Although you may not be experiencing a paper jam, the steps in this document may be all that is left to try; 'Clear paper jam, then press OK' Error Message Displays on the Control Panel.
    I hope this helps, but if after all your efforts the issue remains, I suggest calling HP. They may be able to offer you a discount on a newer model as part of a trade in trade up option. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • PAPER TRAY SUCKS. CANNOT PRINT OUT PHOTOS, TRAY ONLY ACCEPTS PAPER FROM BOTTOM TRAY. GRRRR.

    My BRAND NEW (One week from delivery) no longer prints out photos.  It printed out photos several times but 3 days' ago it stopped.
    The paper tray is malfunctioning.  Each time I try to print out a photo (remember, it's been done several times until a few days' ago) THE TRAY WILL NOT ACCEPT PAPER FROM THE TOP TRAY!! 
    SELECTED PHOTOS PRINT OUT ON PAPER FROM BOTTOM TRAY ONLY!!   MY INK AND PAPER IS BEING WASTED AND SEVERAL OTHER POSTERS ARE EXPERIENCING THE SAME ISSUES WITH THE HP 6520!
    Is one of those infamous 2-hr. long marathon phone calls to Tech Support in India the ONLY way one can sensibly have an HP issue resolved? 
    This is ridiculous!

    Hi,
    Sorry to hear you are having problems printing. What device are you using to print?
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Unable to pick unicode characters from input file using "outside in"

    Hi,
    I am using your product "Outside in" to read unicode text from input
    source file. For reading text I am using TReadFirst and TReadNext even
    though "It is not picking unicode characters from input source file
    and also it is giving zunk character to the buffer". How can I
    retrieve unicode character from input source using "outside in"
    product. Your help makes me learn more stuff.
    Regards,
    Naresh.D

    I am trying to use CAReadFirst and CAReadNext to read unicode characters. Even it is not picking, I think is there any flags we need to set. can any one help to this.

  • Photosmart 7525 won\'t pick up paper from the Automatic Document Feeder

    Just bought this printer from Costco. The Automatic Document Feeder won't work. Chime indicates that paper is inserted, but there is no pickup. 1 page or more, won't pull paper through.

    Sorry that you are experiencing an issue with the ADF.  Sometimes it may need cleaning or rollers need wiped. I understand with this being a new printer, you should not have those problems.  Here is a link that may assist you with that issue. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01728503&cc=us&dlc=en&lc=en&product=5286643&tmp_track_link=ot_search Let me know if this helps. 

  • HP LJ 600 M602 uses paper from other tray

    I have a problem with a new HP LJ 600 M602 printer.
    I think it's best to discribe an example of the problem.
    For example i start a printjob of 1000 pages from tray 1 which holds 500 sheets. Now it should just say tray 1 is empty when it hits the 500 pages printed but it wil automatically continue to print from tray 2. This should not be happening since i turned off the option "Use other tray" on the printer it's self and the web interface. It is also turned off in the printer settings on the computer in word that is used for the printing.
    The actual configuration of the printer is:
    Tray 1: Manual
    Tray 2: blank paper
    Tray 3: paper with corporate logo1
    Tray 4: paper with corporate logo2
    And all have the option "use other tray" turned off.
    Could this be a driver problem or am i missing a setting somewhere?
    Sorry if my english is not 100% it's not my native language, and thanks in advance if you can help  me!

    Hello Jackkemkens
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Problem with payables open interface import-unable to pick invoice data

    Hi,
    I have put the Interface data in two staging table and then moved them to AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE tables.
    Code:
    insert into XXWU_AP_INVOICES_INTERFACE (
    invoice_id,
    invoice_num,
    vendor_id,
    vendor_site_id,
    vendor_site_code,
    invoice_amount,
    INVOICE_CURRENCY_CODE,
    invoice_date,
    DESCRIPTION,
    PAY_GROUP_LOOKUP_CODE,
    source,
    org_id,
    OPERATING_UNIT
    values (
    ap_invoices_interface_s.nextval,
    'INV345DJ',
    '3317',
    '14335',
    'ACH NY1',
    1200.00,
    'USD',
    to_date('01-31-2010','mm-dd-yyyy'),
    'This Invoice is created for test purpose',
    'WUFS SUPPLIER',
    'Manual Invoice Entry',
    81,
    'WU_USD_OU'
    insert into XXWU_AP_INVOICE_LN_INTERFACE (
    invoice_id,
    invoice_line_id,
    line_number,
    line_type_lookup_code,
    amount,
    org_id
    values (
    ap_invoices_interface_s.currval,
    ap_invoice_lines_interface_s.nextval,
    1,
    'ITEM',
    1200.00,
    81
    INSERT INTO AP_INVOICES_INTERFACE (SELECT * FROM XXWU_AP_INVOICES_INTERFACE);
    INSERT INTO AP_INVOICE_LINES_INTERFACE (SELECT * FROM XXWU_AP_INVOICE_LN_INTERFACE);
    I can very much see the data in Open Interface Invoices(Front End). But when I run the payables open interface import program with correct Operating Unit, Source and Batch Name, the program unable to pick the data from the interface tables and unable to create a invoice.
    Note:
    1] The program run successfully everytime, but there is no output in the output file.
    2] In the Log file One Message is there saying 'Zero(0) invoices were created during the process run.'
    3] All the initail setup is right, i think, because I ran the same program few days back and it was working fine and the invoices were created at that time. Now what is going wrong I am unable to figure it out.
    Please help ASAP.Thanks in Advance
    DJ Koch.
    Edited by: DJKOCH on 17 Aug, 2010 9:51 PM

    Can you run the program - Payables Open Interface Import with Debug mode set to Yes.
    Once the program completes sucessfully verify the log file of the program and try to find out if there are any invoices which is causing the exceptions.
    Also confirm that the invoices which are in the AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE tables are of the correct period in which you are trying to create the invoices.
    Hope this helps.
    Thanks and Regards
    Manish Jain.

  • Not picking up paper to scan to computer

    Hi- this printer does not pick up the paper when scanning to a computer.  It did until last Friday.
    I can copy and it picks up the source paper and makes copies.
    I can scan to USB and it picks up the papers and scans to USB.
    But if I scan to computer, it does not pick up the paper,  It sits in the tray.  I hear some wheels rolling but evidently it is not the pick-up-the-paper-from-the-tray wheels.  I can scan off the glass no problem...but that is just one sheet.  paper is seated properly on teh tray- the screen acknowledges its presdense with "Document loaded"
    Anything I can try before calling for service?  I wiped clean all rollers and paper separators and I powered off and then back on the equipment.  Let me know and thank you in advance. 

    Thanks X-23 for a quick reply )   I will try your suggest procedures on this Saturday when the MacBook and the printer are free-up from work.  I will let you know the results.

  • Programatically pick PowerView properties from Microsoft Excel 2013 file

    Hi,
    I have a requirement to programmatically read/handle PowerView properties like title, theme, background, font-size etc. from a Microsoft Excel 2013 file. Also I need to access the properties of the objects which are added on to the PowerView,
    for e.g. properties of a table or a image added to the PowerView.
    I have been looking for it since long, but no luck. Is there a way by which I can achieve it? Any pointers regarding this would be really helpful.
    Thanks in advance.

    Thanks Simon_Hou for the response.
    As per your answer, PowerView is an add-on and hence it is packaged and properties can't be picked.
    But, PowerPivot is also a com add-in still there exists a programming handle for it. We are able to pick several properties for PowerPivot using Interop.
    For PowerView, I am able to see certain bin files getting created but am unable to pick any information from those.
    (Bin files namely CustomProperties1.bin, CustomProperties2.bin, CustomProperties3.bin, CustomProperties4.bin, CustomProperties5.bin)
    Is there any way by which we can pick certain properties for Power View as well using these files or maybe some other way?

  • Tutorial: Print index cards without removing paper from tray for Officejet Pro 8000.

    The HP Officejet Pro 8000 and Officejet Pro 8000 wireless do not have a slot for inserting index cards and envelopes.
    If you are wanting to print index cards without removing the paper from the tray, follow these steps.
    The steps below are for 3 x 5 index cards.
    1.) Open Microsoft Word
    2.) Go to the Insert tab and insert a rectangle shape
    3.) Draw a rectangle of any size
    4.) Right click on the rectangle and select "Format Autoshape..."
    5.) Under the Size tab, enter 5" for the height and 3" for the width (make sure "Absolute" is selected)
    6.) Under the Layout tab, select "Center" for the horizontal alignment
    7.) Click OK
    8.) Use the keyboard up arrow key to move the rectangle to the top of the page.  Make sure the top edge of the rectangle touches the top edge of the document.
    9.) Print this document on plain 8.5" x 11" paper
    10.) When you want to print an index card, place this 8.5x11 document in the paper tray printed side face up.  Then place an index card over the rectangle and align with the border of the rectangle.  After you print the index card, remove the 8.5x11 paper for the next time you need to print an index card.
    Note 1: This are USA instructions.  If you live in the UK or other countries you may have different paper size standards.

    I can't tell you how much I HATE this printer.  I will never buy an HP product again.  BROTHERS printers are simply and easy to use.

  • HP Laserjet P2055dn doesnt take paper from tray 2

    Problem is with a P2055dn printer, it incorrectly thinks there are no paper at tray2. It says "load paper"
    The situation is as such when:
    There is more than 10 papers and less than ab 1.5cm stack of papers. The "sticky roller" that should take the paper from the tray seems to roll and makes a scrieking noise, then it stops and says "load paper". If there is more or less paper the printer works fine.

    Hi jonsed77,
    Welcome to the HP Consumer Printer Forums.
    According to the Specs for this printer, it only has one paper tray (and an automatic document feeder).
    Paper handling
    150-sheet input tray, 35-sheet automatic document feeder
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Maybe you are looking for