Pixma 922 will not scan after Mac Yosemite 10.10.1 update

Ive got a networked Canon Pixma 922. I've reinstalled the Canon Printer update from Apple, and reinstalled the latest drivers from Canon's website, but the scan icon will not appear in the Canon driver software, nor does Image Capture detect the presence of the scanner. It was working fine until the Yosemite 10.10.1 update.
Any ideas?

Ive got a networked Canon Pixma 922. I've reinstalled the Canon Printer update from Apple, and reinstalled the latest drivers from Canon's website, but the scan icon will not appear in the Canon driver software, nor does Image Capture detect the presence of the scanner. It was working fine until the Yosemite 10.10.1 update.
Any ideas?

Similar Messages

  • Dreamweaver CS6 will not open after Mac Yosemite 10.10.1 update

    Just updated to mac Yosemite 10.10.1 and now Dreamweaver will not open

    http://www.apple.com/support/mac/app-store/contact/
    27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

  • HP Envy 4500 will not scan to Mac

    HP Envy 4500 will not scan to MAC.  Printing works just fine but when I try to scan the printer says scanning but never completes the scan, there is no error message.  I tried uninstall and reinstall of the software, upgraded to Mac OS Yosemite and tried re-install again, no luck.

    Hi @eallen1219 
    From your description, it soudns like we may be haivng a osftware issue. Let's use the following steps to remove currenlty installed software, clean up the Mac, and reinstall the software again;
    Scrub/ Uninstall
    Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
    Click continue, click on one of the printers in the list.
    * Only do this step if you do not have any other HP Printers.  Hold down Control, Option and Command, While holding the three buttons down,
    Click uninstall.
    Reset Printing System
    Click the Apple icon (   ), and then click System Preferences.
    In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Repair Disk Permissions
    On the Dock, click Applications, and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions button at the bottom of the window.
    Once the repair is complete, restart the computer.
    Restart the printer. Now you can download and install the printer software and install it. >  HP-ENVY-4500-series_v12.34.0.dmg
    When you add the printer, please ensure you are using the HP driver.
    Select Add other Printer or Scanner                                                       
    Select the printer you are adding and next to 'Use' you can the printer driver 
     Please let me know if you can scan now. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Photoshop CS4 will not launch after installing Yosemite.

    Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.

    Here's the fix I found, by way of an explanation...
    Snow Leopard prompted me on my first startup with the following error:
    "There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
    The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
    Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
    So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
    Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
    Thanks for the ideas!

  • IPhoto upgrade will not install after downloading Yosemite

    iPhoto will not upgrade after installing Yosemite.

    Ok so here's what you gonna do. (had this problem myself today, and after some fiddling figured out what to do.)
    Find your old iPhoto with a cross through it, right-click it and select 'show package contents'. A folder will open. In that folder go to Contents>MacOS and there will be three little things there. Click on the one called 'iPhoto' and terminal will open. Leave terminal open and wait four seconds and VOILA! iPhoto opens. Leave terminal open until you are finished with iPhoto, because if you close terminal, iPhoto will close with it. THX! ENJOY! Hope it works.
    P.S.
    You can close terminal once you close iPhoto. I also suggest backing up your iPhoto library while you can.

  • My mac book will not start after installing yosemite

    CCan somebody help me with this problem?

    Hi karenfromherne,
    If your MacBook will not power on I would suggest that you troubleshoot using the steps in this article - 
    Troubleshooting: My computer won't turn on
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HP Office Jet J6480 All In One - will not scan with Mac OS 10.8 .3

    I have been unable to get my HP Office Jet J6480 All In One to scan after upgrading to 10.8.3.I have followed other posts and have installed the most up to date driver (http://support.apple.com/kb/DL907) but each time i try to scan from the HP device manager or the photosmart studio, it says "Sorry, scanner could not be intialized. (scanner not found)"  I have tried making sure there are no other updates by clicking on settings in the device manager and clicking check for updates but it tells me "server not availalbe - the software service is currently not available. please try again later" and i have gotten this error for the last week.
    I followed the second set of instructions found here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve that issue and have installed the software found at the link. I rebooted my computer and am still having the same problem.
    Note: My printer is wireless and i have not hooked it up via a cord. Will that make a difference?
    My printer seems to be printing fine.
    Thank you for any help you can provide.
    Sara
    This question was solved.
    View Solution.

    Try scanning from your Mac.  Use Image Capture app in your Applications folder.
    Click once on the scanner on the left side, then click on Show Details along the bottom.  Along the right side you will see LOTS of options for scanning and saving.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Iphoto will not work after uploading yosemite

    After uploading the Yosemite upgrade. The iPhoto will not work. I have done what the software recommends. I have deleted the app and reloaded it. I get the same message. The message that i get is:
    your photo library is either in use by another application or has become unreadable.
    shut down and restart your computer and then open iPhoto again. if the problem persists. try rebuilding your photo library. to do this quit iPhoto, and then reopen it while keeping the option and command keys pressed. you can also try restoring your photo library from a backup.
    Any suggestions or help would be greatly appreciated.
    Matt

    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • My hp4530 will not print after installing Yosemite

    After installing Yosemite my printer will not connect because it is not "found" by my macbook pro.  I re-installed the driver, but that hasn't worked.  What else can I do? I've restarted, unplugged . . . all the obvious things haven't been successful.

    Hi Bella,
    This video helped me Printer/Scanner Fix With Yosemite No Matter What Brand. another thing you might want to do if that doesn't work is to add your printer by IP adress
    -crazy

  • Bridge will not open after Mac OSX update

    Hi, I updated to Mac OSX 10.9.5 yesterday, and now Bridge CC will not open.  What should I do?

    I'm not familiar with Lr, not having used it since trying it and thoroughly hating it when I tried when it first came out, but…  I'm not quite clear what you mean by "open in Bridge".
    Bridge doesn't "open" anything, so I suspect you mean open in Adobe Camera Raw hosted by Bridge.  Bridge is just a file browser, and as such it doesn't open, edit, manipulate or save anything; it just hands the file(s) to the appropriate application, whether that be Photoshop, Adobe Camera Raw (ACR), Adobe Illustrator, InDesign or even something like MS Word.
    Perhaps you need to re-establish the file association at the OS X level.  What happens when you bypass Lr altogether and just double-click on a raw file in the Finder?

  • Itunes will not open after installing yosemite

    I installed Yosemite and have tried to repeatedly. Get my new Itunes 12 to open but it refuses. It will not make any indication that it is attempting to open. I have tried to reinstall it a number of times and it still will not open.
    any help is appreciated.
    david

    Hi,
    I've encountered the exact same problem.
    iTunes wouldn't start up at all, even tough it had the correct version.
    By browsing to the applications contents and running the itunes exec it would work.
    Also running it through Terminal would work. But simply not by clicking the iTunes.app
    However i've fixed it! by manually setting read and write so that you can delete the iTunes.app. (for a tut see http://www.tekrevue.com/tip/uninstall-itunes/)
    Then manually Install iTunes again by downloading it at http://www.apple.com/nl/itunes/download/
    Then it worked fine with me! Hope it helps.

  • IPhoto will not open after Mac App update ......saying Prokit is incompatible.

    I upgraded on my iMac, as suggested through new updates in my Mac apps store, several apps - including iPhoto.  And now, my iPhoto, which worked 2 weeks ago will not open saying is not compatible with ProKit.  I have uninstalled and reinstalled ProKit....to which every time I am told I have a higher version already in the system?  I have used my Time Machine back up and with same result.  I had purchased the new iPhoto through the App Store thinking it would help....and have reinstalled many times with no result.
    This is the note I get: 
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'RunTimeThemeRefForBundleIdentifier() couldn't find AppThemeBits.car in bundle with identifier: com.apple.iLifeKit'
    My Aperture is working, but no iPhoto. Please help.

    Also, I have reinstalled my Operating System with no results.

  • Hp d110 will not scan after install of 8.1

    hello, my computer updated to the new Windows 8.1 and now my HP D110a series will no longer scan,I have done everything from down;oading drivers,run scan doctor but nothing works. I am getting an error message scanning software launched improper command line argument, can anyone help, Thanks

    Hi @abriya,
    Welcome to the HP Forums!
    I understand that you cannot scan with your HP Photosmart d110a after upgrading to Windows 8.1. I am sorry to hear this, but happy to help you with this scanning issue!
    Are you able to make copies with the printer?
    In the meantime, Please take a look through this scanning guide, An 'An error occurred while communicating with scanning device' or a 'There is no computer connectio....
    Hope this guide helps!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • 5510 will not scan using Mac OS X version 10.9.5

    Since I upgraded to Mac OS X version 10.9.5 I can no longer scan using my HP e - all in one B111 printer.  Is there a patch to fix the problem? 

    Hello there! Welcome to the forums @lilypants ,
    I understand you have upgraded to Mavericks and are no longer able to scan, using your Photosmart 5510. I have some suggestions for you below, that might help.
    Mac OS X: How to reset the printing system
    Repair disk permissions
    Restart the Mac
    Install the Full Feature driver: HP Photosmart 5510 e-All-in-One Printer Full Feature Software and Drivers
    In addition, download this driver: HP Printer Drivers v3.0 for OS X
    Now try scanning and it should work
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Safari will not open after installing Yosemite on my iMac. I loaded it on my MacBook without any issues. I've searched and tried some things that were posted such as safe mode and removing 3rd party plug-ins with no luck. When is there a fix?

    is there an an Apple approved procedure to fix Safari from crashing? From posts that I've read, this was an issue in the Beta version, so I wonder why it was not fixed before it was released. I work all day and don't have a lot of time in the evening to troubleshoot something that should have been tested and approved before releasing. Apple, It just doesn't work.

    is there an an Apple approved procedure to fix Safari from crashing? From posts that I've read, this was an issue in the Beta version, so I wonder why it was not fixed before it was released. I work all day and don't have a lot of time in the evening to troubleshoot something that should have been tested and approved before releasing. Apple, It just doesn't work.

Maybe you are looking for