Pixma ip4600 cd issues on Mac OS X

The Pixma Ip4600 is not printing to cd/ disk; printer only prints test page on A4; downloaded latest drivers for the Mac OS 10 X Mavericks and still has same problem. Please help?

That is how I did it before. I started the Disk Utility program, clicked Burn, open the ISO disk image file, and away it went.
The ISO image file on my Mac is called
sol-10-GA-sparc-v1-iso.iso. Is this the correct file?
Here is the error that I am getting when I try to boot it.
ok boot cdrom
Resetting ...
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.25, 256 MB (50 ns) memory installed, Serial #
Ethernet address , Host ID:
Rebooting with command: boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args:
Can't read disk label.
Can't open disk label package
Boot load failed.
The file just loaded does not appear to be executable.

Similar Messages

  • Scannning issues with Mac

    I have a Pixma MG2270 connected to a Mac Mini running Yosemite. Whenever I scan a photo all I get is a corrupted file, which shows up as a '?' in the Image Garden. I have no problem scanning documents and  I have no problem whatsoever when connected to a Win 7 laptop. Can somebody please help? Thanks.

    Well known issue and no solution yet. There is nothing wrong with your computer.  http://9to5mac.com/2014/05/21/os-x-10-9-3-breaking-mac-pro-graphics-card-compati bility-with-critical-pro-apps/

  • HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

    Hi...
    I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
    There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
    "Failed to open a session on the device"...
    Scan to computer does not work...
    Problem scanning to computer with an 8600 wireless
    Unable to enable print to computer...
    Enable Scan to Computer - Communication Error
    Officejet Pro 8600 Utility does not show my Mac computer in scan settings
    A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
    HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
    Etc.
    However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
    The behavior of the device points to a software issue, since:
    The printer is visible on the network
    The print function has been working fine
    The HP Scan function works
    The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
    The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
    The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
    As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
    The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration. 
    The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
    Thanks,
    PNS

    facman
    I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
    Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
    Uninstalling the Printer Software
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
    HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
    http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
    Please feel free to re-post if you have any further questions or concerns we are here to help.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    Hi Seattle
    From Adobe site only!
    flashplayer11_b1_install_mac_071311.dmg
    Works fine.
    Cheers Tomi

  • IS CANON PIXMA MX410 FULLY COMPATIBLE WITH MAC OS X 10.07.5 ?

    IS CANON PIXMA MX410 FULLY COMPATIBLE WITH MAC OS X 10.07.5 ?
    I WANT TO BUY ONE, I HAD MANY PROBLEMS WITH PREVIOUS MULTI PURPOSE DEVICES JUST WANT TO BE SURE.... WI FI COMPATIBILITY,,,ETC

    Anthoulla wrote:
    IS CANON PIXMA MX410 FULLY COMPATIBLE WITH MAC OS X 10.07.5
    Yes it is. Canon has supporting printer and scanner drivers and applications. Refer to this link from Canon Australia.

  • Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

    Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

    To answer the obvious question. No. None that I've seen. But it may depend on what you mean exactly?
    Connecting to file sharing service - None that I've seen
    Connecting to Open Directory (assuming proper configuration) - None that I've seen
    Using the Server's Mail Service (assuming proper configuration) - None that I've seen
    I can say the same about anything else the Server may or may not be offering.

  • Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked.  However, when I downloaded the same two drivers on Mac Book Air, neither worked.

    Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked.  However, when I downloaded the same two drivers on Mac Book Air, neither worked.

    I wasn't aware that VueScan charged a yearly license.
    You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column.  Select the scanner name and the app will start an overview scan.  You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
    The above description is when everything is working correctly, which has been the case for me.
    Good luck.

  • Compatibility issues with Mac OSX Leopard 10.5 and Word 2004 11.6.3 on G5 PowerMac?

    Are there compatibility issues with Mac OSX Leopard V. 10.5 and Word 2004 11.6.3 when installed on a PowerMac G5? I understand the Leopard upgrade is okay on the later Intel Mac, but what about my G5 PowerPC Mac?

    I do not use Microsoft Excel much but when i do use it it works fine on my G5. my powerbook has excel to but sometimes freezes on the powerbook. but not the G5 so give it a try you can always uninstall it if it does not work good
    anitabean wrote:
    Thanks so much for your positive reply! Are you a big user of Excel? That's where I've heard people have had trouble, with cells locking up and so on.
    Crossing my fingers and loading Leopard....
    Cheers.

  • Pixma iP4600 doesn't print on TC

    i just bought a Canon Pixma iP4600 printer and connected it to my time capsule which I use as a router for my Imac, MacBook, ATV and Iphone.
    The installation of the printer went fine except that I wasn't able to do the printer head alignment because for this task the printer couldn't be found. The printer shows up in the system preferences>Print&Fax and also in the Airport Utilities>Manual Setup>Printers (or Summary).
    When I try to print from one of my two computers the printer doesn't print and the on/off status light blinks green (as if it was handling data) and the printer queue gives me error message 306. Furthermore, the printer doesn't show up in the printer list from system preferences>Print&Fax>Open Print Queue> Utility. Neither USB nor Network show any printer. I thought it should show up in Network to allow for maintenance etc.
    When I connect the printer directly to my computer it works just fine and prints instantly.
    I tried everything disconnecting the printer and resetting the printer list etc.....nothing fixed the problem.
    I haven't yet set up my time machine for back up as my Imac is new and I am just in the process of cleaning up data on my Macbook and moving data over. This shouldn't matter though...or should it?
    Any help/thoughts are much appreciated.
    Thanks and regards,
    Frank

    The "spine insert" is normally known as the tray liner. It fits into the back of a 10 mm jewel case, and reached up both spines. iTunes does not print them.
    As you observed, iTunes has a few very limited options for printing jewel cases. If you are serious about producing nice CD packaging, or even want just a little more control over the printed output, you will need to use another program.

  • [svn] 4910: Implementing workaround for history manager rendering issue ( Firefox/Mac) caused by a long standing player bug.

    Revision: 4910
    Author: [email protected]
    Date: 2009-02-10 11:51:58 -0800 (Tue, 10 Feb 2009)
    Log Message:
    Implementing workaround for history manager rendering issue (Firefox/Mac) caused by a long standing player bug.
    Bugs: SDK-17020.
    QE Notes: None
    Doc Notes: None
    Reviewer: Alex
    Tests: DeepLinking
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17020
    Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/managers/BrowserManagerImpl.as
    flex/sdk/branches/3.x/templates/html-templates/client-side-detection-with-history/history /history.js
    flex/sdk/branches/3.x/templates/html-templates/express-installation-with-history/history/ history.js
    flex/sdk/branches/3.x/templates/html-templates/no-player-detection-with-history/history/h istory.js

  • PIXMA Pro9000 Mark II print issue with Mac

    I am having issues printing photos.  The picture comes out really dark, and the color is not right.  I am using the latest version of Mac.  How can I fix this issue?

    Hi droidus,
    iPhoto is good for basic printing, but it offers very little in the way of color correction beyond the basic print quality settings.  If you are printing professionally with the Pro9000 Mark II I would recommend using a program that givse you more control over how the picture comes out such as Photoshop.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Sudden banding issue with Mac and new Canon printer, already called tech

    Good morning fellow Elementites.
    I have been using Photoshop Elements 12 on my MacBook Pro 13 inch, running Maverick OS, printing to HP Photosmart Premium all-in one with no banding issues, ever.
    I did want to upgrade my printer and monitor so I purchased the Canon Pixma Pro 100 and a new external LG IPS monitor to view the PSE program.
    I also purchased ColorMunki Display to calibrate the monitor. Everything is operational with the recommended settings for color etc.
    I printed a .tiff image and a .jpg through the PSE print function. The images that looked perfect on the new monitor and Macbook monitor printed with banding. I called Canon tech support. The man had me perform a few tasks to make sure the printer was operating correctly. We printed test sheets from the printer and they were all as they should be.
    He the said he NEVER prints from PSE. He edits in PSE but prints using Canon's EZ share or print or whatever it's called, doesn't matter cause I do NOT LIKE IT AT ALL. Not to mention it is just another step in the work flow. Not to mention that I paid good money for a photo editing program of high quality and I want to use ALL the features.
    He said the problem isn't the printer but the printing software instructions TO the printer via the Mac OS printer system, or something like this is what he said. He also had me download some other updates and driver files. He then had me remove the printer from my printer list and then add it back.
    He then had me print the .jpg image, (it only prints .jpg which is annoying as heck,) and it came out SO BEAUTIFUL I ALMOST CRIED
    I want to print this quality THROUGH PSE. Does anyone have a clue as to what to do to resolve the issue?  None of the suggestions in other threads from the past seem appropriate enough.
    Eager to hear,
    Regards.

    I have returned home and have copied down all the settings so that I may post them here before I do any more fiddling.  Maybe something glaring will be spotted before I start changing things.
    I opened an image in PSE 12.
    I chose from the PSE menu at the top of the monitor, FILE >PRINT
    A window appears with my photo and boxes and such: 1. Select Printer> CANON PRO 100-SERIES (The other printer isn't concern now).
    Select Paper Size and Orientation, no problems with this or any of the other settings in this window.
    I then select MORE OPTIONS button at bottom of window.
    Another window opens.
    There are 3 options listed on the left hand side PRINTING CHOICES which it is automatically on, CUSTOM PRINT SIZE which I haven't needed yet, and COLOR MANAGEMENT.
    I select COLOR MANAGEMENT.
    COLOR HANDLING is set to PRINTER MANAGES COLOR.
    IMAGE SPACE is listed, not in any box, as sRGB IEC61966-2.1
    PRINTER PROFILE is listed in a box that is grayed out and not selectable, as CANON IJ COLOR PRINTE...
    RENDERING INTENT is set in a selectable box as RELATIVE COLORMETRIC.
    (There is a little mssg below all this that reminds me to remember to enable color management in the printer preferences dialog.  I was never able to find this action and after doing some research I read that this mssg is a boo boo as the function is automatic in MAC running Maverick, supposedly).
    I then click OK and the box goes away.
    I then click the PAGE SET UP button.
    A window titled PRINT opens.
    The Printer selection box says CANON PRO=100 series.
    The next box always confuses me because nothing in the list appears to pertain to me when I want to print my photos.  It is the Presets box.
    I believe FAST PRINTING ON PLAIN PAPER is always showing when I open this window.  But I don't want that so I always look to see if there is something I should choose that applies.  I don't know what they mean by DEFAULT SETTINGS in this case.  LAST USED SETTINGS would be ok if that was what I wanted each time I printed.  FAST and FINE on Plain Paper?  I have been assuming they mean plain copy paper so I don't choose that.  SAVE CURRENT SETTINGS AS PRESET, I don't choose that because I haven't been sure of the settings.  And the SHOW PRESETS does me no good becuase you can't change anything in there.
    PAPER SIZE, not an issue at the moment.
    LAYOUT button is my next stop, by now I am exhausted
    I look at COLOR MATCHING which shows CANON COLOR MATCHING as the selected method.  (The other choice is COLOR SYNC but I don't know anything about that one and haven't been told to change it.)
    PAPER HANDLING & COVER PAGE, N/A at this time.
    QUALITY & MEDIUM.  I choose my paper type, paper source, print quality which for my photos I select HIGH.  I don't touch COLOR OPTIONS because that is scary looking.  And BORDER and MARGIN I have no issue with.
    I then hit SAVE and the window closes.
    Then I select PRINT in the lower right of the window that has my photo in it and from which I acessed all these other things.
    Phew.  So, can anyone tell me if they see anything wrong here, PLEASE.
    Regards,
    P.

  • Resolved Color Correction issue with MAC OS X and Canon pro 9000

    Problem: Unable to set the Color Correction option to NONE. I have looked all over the net and it seems that there are lots of people with this problem. After months and months of battling with this issue I have finally come up with the answer. Its all down to the fact that MAC OS X comes with a pre installed driver for the Canon Pixma Pro 9000. To cut a long story short this driver needs to be deleted from your system files before you update your driver, which you need to download from the canon website. I downloaded version 4.8.6. The new driver does not seem to work with the default driver still on the comp. After following directions below you should finally be able to get your Color Correction option on your driver working.
    First things first... go to the following location and delete the canon pro 9000 driver.
    Location: /Library/Printers/PPDs/Contents/Resources
    File Name: CanonIJPro900series.ppd.gz
    (make a backup of this file if you wish )
    Once you have deleted the driver you need to restart your mac.
    After rebooting install the new Canon Pro 9000 driver. I suggest installing version 4.8.6(this one worked for me)
    Reboot Mac again just for good measure then do a test print and you should now be able to set COLOR CORRECTION to NONE.
    I know there are a lot of people out there having the same problem so if you are reading this please pass the solution on to others.

    Hi Japamac,
    Indeed a new cable just bought solved this problem.
    Still wandering why my MacbookPro was able to print and my PowerMac not, maybe another driver issue?
    Thank's anyway for your reply.

  • New Canon Pixma ip4600 won't show on my Airport Express printer list

    Hi,
    I've just had to replace my old Pixma ip4000 printer with a new ip4600 printer. The printer has set-up on my iMac and Macbook but it does not show in Airport Utility in the printers section. I've tried unplugging the printer from the USB and unplugging the AE but whichever combination I try it does no good. All ok on the usb direct to the computer.
    I've followed many of the support articles to no avail. Can somebody help please? Until the printer shows on the AE I'm unable to print wirelessly.
    Regards,
    Colin Ashworth

    Hi Colin,
    As you have said in your post, until you can get the Express to recognise the iP4600 as being connected via USB, you will not be able to add the printer. And note that you cannot use the More Printers > Canon IJ Network facility - this is for Canon's that are connected via Ethernet or wireless to the network.
    Are you using the same USB cable to connect the iP4600 to the Express as you are for connecting directly to the Mac's USB? If not, then try another USB cable.
    If you are using the same cable, then has the Express got a reset button? I know the Extreme's do and I'm thinking that possibly the Express is still expecting the iP4000 on the USB. If there is no button then you could a factory reset via the Airport utility. You could also check if there are any updates for the Express.
    PaHu

Maybe you are looking for