Pixma iP4600 doesn't print on TC
i just bought a Canon Pixma iP4600 printer and connected it to my time capsule which I use as a router for my Imac, MacBook, ATV and Iphone.
The installation of the printer went fine except that I wasn't able to do the printer head alignment because for this task the printer couldn't be found. The printer shows up in the system preferences>Print&Fax and also in the Airport Utilities>Manual Setup>Printers (or Summary).
When I try to print from one of my two computers the printer doesn't print and the on/off status light blinks green (as if it was handling data) and the printer queue gives me error message 306. Furthermore, the printer doesn't show up in the printer list from system preferences>Print&Fax>Open Print Queue> Utility. Neither USB nor Network show any printer. I thought it should show up in Network to allow for maintenance etc.
When I connect the printer directly to my computer it works just fine and prints instantly.
I tried everything disconnecting the printer and resetting the printer list etc.....nothing fixed the problem.
I haven't yet set up my time machine for back up as my Imac is new and I am just in the process of cleaning up data on my Macbook and moving data over. This shouldn't matter though...or should it?
Any help/thoughts are much appreciated.
Thanks and regards,
Frank
The "spine insert" is normally known as the tray liner. It fits into the back of a 10 mm jewel case, and reached up both spines. iTunes does not print them.
As you observed, iTunes has a few very limited options for printing jewel cases. If you are serious about producing nice CD packaging, or even want just a little more control over the printed output, you will need to use another program.
Similar Messages
-
Pixma ip4600 cd issues on Mac OS X
The Pixma Ip4600 is not printing to cd/ disk; printer only prints test page on A4; downloaded latest drivers for the Mac OS 10 X Mavericks and still has same problem. Please help?
That is how I did it before. I started the Disk Utility program, clicked Burn, open the ISO disk image file, and away it went.
The ISO image file on my Mac is called
sol-10-GA-sparc-v1-iso.iso. Is this the correct file?
Here is the error that I am getting when I try to boot it.
ok boot cdrom
Resetting ...
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.25, 256 MB (50 ns) memory installed, Serial #
Ethernet address , Host ID:
Rebooting with command: boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args:
Can't read disk label.
Can't open disk label package
Boot load failed.
The file just loaded does not appear to be executable. -
Pixma Pro-10 stops printing in middle of an image.
Pixma Pro-10 stops printing in middle of an image. It is wireless, using OS Windows 7 - 64 bit. It doesn't do it all the time but the larger images (13x19) have more problems. I am using LightRoom 5 and Canon Print Studio Pro to print the image. Very frustraing especially when it gets to 1 inch of finishing an image and decides it done. Thank you for your assistance.
If it doesn't do it all the time is it possibly losing wireless signal? How close/far is printer from the wireless router?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472 -
[SOLVED]Canon D1100 Series UFRII LT doesn't print, CUPS thinks it does
Hello everyone,
I have been struggling getting a network printer at work working with my laptop. I installed the driver from Canon's web site, and everything seems to be fine on my end, but the network printer doesn't print anything I give it. I can't find the issue in my log after running the following command:
echo "This is a test. Hello world." | lpr -p
Here's the output from the error log:
D [30/Jan/2014:14:52:31 -0600] [Client 14] 2.0 Create-Job 2
D [30/Jan/2014:14:52:31 -0600] Create-Job ipp://localhost:631/printers/Canon_D1150_D1170
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [30/Jan/2014:14:52:31 -0600] add_job: requesting-user-name="yaro"
I [30/Jan/2014:14:52:31 -0600] [Job 15] Adding start banner page "none".
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-created event...
I [30/Jan/2014:14:52:31 -0600] [Job 15] Queued on "Canon_D1150_D1170" by "yaro".
D [30/Jan/2014:14:52:31 -0600] [Client 14] Returning IPP successful-ok for Create-Job (ipp://localhost:631/printers/Canon_D1150_D1170) from localhost
D [30/Jan/2014:14:52:31 -0600] [Client 14] Content-Length: 179
D [30/Jan/2014:14:52:31 -0600] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=179, response=0x7f8adff8f1e0(IPP_IDLE), pipe_pid=0, file=-1
D [30/Jan/2014:14:52:31 -0600] [Client 14] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
D [30/Jan/2014:14:52:31 -0600] [Client 14] bytes=0, http_state=0, data_remaining=0
D [30/Jan/2014:14:52:31 -0600] [Client 14] Waiting for request.
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Client 14] POST /printers/Canon_D1150_D1170 HTTP/1.1
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [30/Jan/2014:14:52:31 -0600] [Client 14] No authentication data provided.
D [30/Jan/2014:14:52:31 -0600] [Client 14] 2.0 Send-Document 3
D [30/Jan/2014:14:52:31 -0600] Send-Document ipp://localhost:631/printers/Canon_D1150_D1170
D [30/Jan/2014:14:52:31 -0600] cupsdIsAuthorized: requesting-user-name="yaro"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Auto-typing file...
D [30/Jan/2014:14:52:31 -0600] [Job 15] Request file type is text/plain.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [30/Jan/2014:14:52:31 -0600] [Job 15] File of type text/plain queued by "yaro".
I [30/Jan/2014:14:52:31 -0600] [Job 15] Adding end banner page "none".
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] time-at-processing=1391115151
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] 4 filters for job:
D [30/Jan/2014:14:52:31 -0600] [Job 15] texttopdf (text/plain to application/pdf, cost 32)
D [30/Jan/2014:14:52:31 -0600] [Job 15] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [30/Jan/2014:14:52:31 -0600] [Job 15] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [30/Jan/2014:14:52:31 -0600] [Job 15] pstoufr2cpca (application/vnd.cups-postscript to printer/Canon_D1150_D1170, cost 0)
D [30/Jan/2014:14:52:31 -0600] [Job 15] job-sheets=none,none
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[0]="Canon_D1150_D1170"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[1]="15"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[2]="yaro"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[3]="(stdin)"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[4]="1"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[5]="finishings=3 number-up=1 prettyprint job-uuid=urn:uuid:9566668d-244b-32ad-4b26-afeeb081bd7f job-originating-host-name=localhost time-at-creation=1391115151 time-at-processing=1391115151"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[6]="/var/spool/cups/d00015-001"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[7]="CUPS_STATEDIR=/run/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[8]="HOME=/var/spool/cups/tmp"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[10]="SERVER_ADMIN=root@spike"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[11]="SOFTWARE=CUPS/1.7.1"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[13]="USER=root"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[14]="CUPS_MAX_MESSAGE=2047"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[17]="IPP_PORT=631"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[18]="CHARSET=utf-8"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[19]="LANG=en.UTF-8"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[20]="PPD=/etc/cups/ppd/Canon_D1150_D1170.ppd"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[21]="RIP_MAX_CACHE=128m"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[22]="CONTENT_TYPE=text/plain"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[23]="DEVICE_URI=socket://192.168.2.51"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[24]="PRINTER_INFO=Canon D1150/D1170"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[25]="PRINTER_LOCATION="
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[26]="PRINTER=Canon_D1150_D1170"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[27]="PRINTER_STATE_REASONS=none"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[28]="CUPS_FILETYPE=document"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[29]="FINAL_CONTENT_TYPE=printer/Canon_D1150_D1170"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[30]="AUTH_I****"
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/texttopdf (PID 5140)
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/pdftopdf (PID 5141)
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/pdftops (PID 5142)
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/pstoufr2cpca (PID 5143)
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started backend /usr/lib/cups/backend/socket (PID 5144)
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Client 14] Returning IPP successful-ok for Send-Document (ipp://localhost:631/printers/Canon_D1150_D1170) from localhost
D [30/Jan/2014:14:52:31 -0600] [Client 14] Content-Length: 171
D [30/Jan/2014:14:52:31 -0600] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=171, response=0x7f8adff825e0(IPP_IDLE), pipe_pid=0, file=-1
D [30/Jan/2014:14:52:31 -0600] [Client 14] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
D [30/Jan/2014:14:52:31 -0600] [Client 14] bytes=0, http_state=0, data_remaining=0
D [30/Jan/2014:14:52:31 -0600] [Client 14] Waiting for request.
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Client 14] HTTP_STATE_WAITING Closing on EOF
D [30/Jan/2014:14:52:31 -0600] [Client 14] Closing connection.
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Page = 612x792; 14,14 to 598,778
D [30/Jan/2014:14:52:31 -0600] [Job 15] STATE: +connecting-to-device
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Looking up "192.168.2.51"...
D [30/Jan/2014:14:52:31 -0600] [Job 15] pstoufr2cpca start.
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] pdftops - copying to temp print file "/var/spool/cups/tmp/0141652eb6fae"
D [30/Jan/2014:14:52:31 -0600] [Job 15] prtGeneralCurrentLocalization type is 5, expected 2!
D [30/Jan/2014:14:52:31 -0600] [Job 15] backendWaitLoop(snmp_fd=5, addr=0x7f63fcee8c88, side_cb=0x7f63fb5631e0)
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5140 (/usr/lib/cups/filter/texttopdf) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5141 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] Printer make and model: Canon d1100
D [30/Jan/2014:14:52:31 -0600] [Job 15] Using image rendering resolution 600 dpi
D [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter gs (PID 5149)
D [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter pstops (PID 5150)
D [30/Jan/2014:14:52:31 -0600] [Job 15] Page = 612x792; 14,14 to 598,778
D [30/Jan/2014:14:52:31 -0600] [Job 15] slow_collate=0, slow_duplex=0, slow_order=0
D [30/Jan/2014:14:52:31 -0600] [Job 15] Before copy_comments - %!PS-Adobe-3.0
D [30/Jan/2014:14:52:31 -0600] [Job 15] %!PS-Adobe-3.0
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%BoundingBox: 0 0 612 792
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%HiResBoundingBox: 0 0 612.00 792.00
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%Creator: GPL Ghostscript 910 (ps2write)
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%LanguageLevel: 2
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%CreationDate: D:20140130145231-06'00'
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%Pages: 1
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%EndComments
D [30/Jan/2014:14:52:31 -0600] [Job 15] Before copy_prolog - %%BeginProlog
D [30/Jan/2014:14:52:31 -0600] [Job 15] Before copy_setup - %%Page: 1 1
D [30/Jan/2014:14:52:31 -0600] [Job 15] Before page loop - %%Page: 1 1
D [30/Jan/2014:14:52:31 -0600] [Job 15] Copying page 1...
D [30/Jan/2014:14:52:31 -0600] [Job 15] pagew = 583.7, pagel = 763.7
D [30/Jan/2014:14:52:31 -0600] [Job 15] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [30/Jan/2014:14:52:31 -0600] [Job 15] PageLeft = 14.2, PageRight = 597.8
D [30/Jan/2014:14:52:31 -0600] [Job 15] PageTop = 777.8, PageBottom = 14.2
D [30/Jan/2014:14:52:31 -0600] [Job 15] PageWidth = 612.0, PageLength = 792.0
D [30/Jan/2014:14:52:31 -0600] [Job 15] Wrote 1 pages...
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5150 (pstops) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5149 (gs) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5142 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] opvpOpenPrinter(410)
D [30/Jan/2014:14:52:31 -0600] [Job 15] CStubOpenPrinter(349)
D [30/Jan/2014:14:52:31 -0600] [Job 15] Error Response:ReqNo=0, SeqNo=1,opvpErrorNo=-1
D [30/Jan/2014:14:52:31 -0600] [Job 15] Connecting to 192.168.2.51:9100
I [30/Jan/2014:14:52:31 -0600] [Job 15] Connecting to printer.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Set job-printer-state-message to "Connecting to printer.", current level=INFO
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-progress event...
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] STATE: -connecting-to-device
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
I [30/Jan/2014:14:52:31 -0600] [Job 15] Connected to printer.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Set job-printer-state-message to "Connected to printer.", current level=INFO
D [30/Jan/2014:14:52:31 -0600] [Job 15] Connected to 192.168.2.51:9100...
D [30/Jan/2014:14:52:31 -0600] [Job 15] backendRunLoop(print_fd=0, device_fd=6, snmp_fd=5, addr=0x7f63fcee8c88, use_bc=1, side_cb=0x7f63fb5631e0)
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-progress event...
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5143 (/usr/lib/cups/filter/pstoufr2cpca) did not catch or ignore signal 13.
I [30/Jan/2014:14:52:31 -0600] [Job 15] Waiting for printer to finish.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Set job-printer-state-message to "Waiting for printer to finish.", current level=INFO
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-progress event...
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5144 (/usr/lib/cups/backend/socket) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] time-at-completed=1391115151
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-completed event...
I [30/Jan/2014:14:52:31 -0600] [Job 15] Job completed.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:32 -0600] [Job 15] Unloading...
I [30/Jan/2014:14:53:02 -0600] Saving job.cache...
D [30/Jan/2014:14:53:02 -0600] cupsdSetBusyState: newbusy="Not busy", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:53:02 -0600] Report: clients=0
D [30/Jan/2014:14:53:02 -0600] Report: jobs=8
D [30/Jan/2014:14:53:02 -0600] Report: jobs-active=0
D [30/Jan/2014:14:53:02 -0600] Report: printers=1
D [30/Jan/2014:14:53:02 -0600] Report: stringpool-string-count=2756
D [30/Jan/2014:14:53:02 -0600] Report: stringpool-alloc-bytes=8744
D [30/Jan/2014:14:53:02 -0600] Report: stringpool-total-bytes=49520
I believe this is all the relevant information from the log. I've not had any success finding this issue in the wiki or in the forums. Google's turned up no help. I'd really like getting this printer to work. Any help would be greatly appreciated.
Last edited by Yaro (2014-02-25 19:44:17)I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
However there are 2 aur packages that provide the UFRII driver :
- cndrvcups-lb (built from source)
- cndrvcups-lb-bin (uses the binaries) -
Epson SX218 doesn't print (client-error-document-format-not-supported)
Hi there,
I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
Here's what I've done so far:
I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
I installed epson-inkjet-printer-workforce-sx218 from AUR
I started cups...
Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
I searched the forums for a solution
I installed cups-usblp and reinstalled all the cups stuff
Printer got recognized! Yay!
So, now the printer is set up in cups using the avasys driver. But...
It doesn't print!
When I try to print a test page via the cups webinterface it keeps telling me
Unsupported format "application/vnd.cups-banner".
The following packages are installed now:
$ pacman -Qs cups
local/cups-usblp 1.5.0-1
local/libcups 1.5.0-1
$ pacman -Qs foomatic
local/foomatic-db 1:4.0.7_20110707-1
local/foomatic-db-engine 1:4.0.7_20110707-1
local/foomatic-db-nonfree 1:4.0.7_20110707-1
local/foomatic-filters 1:4.0.7_20110707-1
$ pacman -Qs epson
local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
$ pacman -Qs ghostscript
local/ghostscript 9.04-5
Here's my cups error log:
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:01 +0100] Report: clients=1
D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
D [01/Jan/2012:18:59:01 +0100] Report: printers=0
D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
D [01/Jan/2012:18:59:35 +0100] Script header:
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:00:23 +0100] Report: clients=1
D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
D [01/Jan/2012:19:00:23 +0100] Report: printers=0
D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:19:03 +0100] Report: clients=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
D [01/Jan/2012:19:19:03 +0100] Report: printers=0
D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:22:10 +0100] Report: clients=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:22:11 +0100] Report: printers=0
D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:24:21 +0100] Report: clients=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
D [01/Jan/2012:19:24:21 +0100] Report: printers=0
D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:27:26 +0100] Report: clients=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
D [01/Jan/2012:19:27:26 +0100] Report: printers=0
D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:37:11 +0100] Report: clients=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:37:11 +0100] Report: printers=0
D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
I [01/Jan/2012:19:38:18 +0100] Full reload is required.
I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:19:38:19 +0100] Full reload complete.
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
D [01/Jan/2012:19:38:20 +0100] Report: clients=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
D [01/Jan/2012:19:38:20 +0100] Report: printers=0
D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
I [01/Jan/2012:20:54:26 +0100] Full reload is required.
I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:20:54:27 +0100] Full reload complete.
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
D [01/Jan/2012:20:54:28 +0100] Report: clients=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
D [01/Jan/2012:20:54:28 +0100] Report: printers=0
D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
I [02/Jan/2012:05:35:05 +0100] Full reload is required.
I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:05:35:06 +0100] Full reload complete.
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
D [02/Jan/2012:05:35:07 +0100] Report: clients=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
D [02/Jan/2012:05:35:07 +0100] Report: printers=0
D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
I [02/Jan/2012:17:22:51 +0100] Full reload is required.
I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:17:22:52 +0100] Full reload complete.
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
D [02/Jan/2012:17:22:53 +0100] Report: clients=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
D [02/Jan/2012:17:22:53 +0100] Report: printers=0
D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
Thank you very much!Hi Radhakrishnan,
ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
regards,
Stewart -
HP Laserjet PRO MFP125nw doesn't print Microsoft Word documents from PC
Hello.
I've recently bought a brand new HP Laserjet PRO MFP125nw printer. The functions seemed really nice and the price was acceptable. I've brought it to my home, installed it following the manual, connected it to Wi-Fi etc. It generally works fairly well. PDF files are printed perfectly well, the scaning function works and it's generally a nice piece of technology.
The only problem is that it just doesn't want to pring Microsoft Word documents from my PC. It prints it perfectly when I try to print .docx from my smartphone using the app, but it doesn't respond when I try doing it from the PC.
My Office version is 2007 Enterprise. Do you have any idea what I should do?
Thank you in advanceThank you a lot for a quick reply, Cbert. It's fantastic to see HP actually reading their forums and trying to help!
I'll try plugging it into the wall and directly to the PC with a USB, we'll see if it works out.
About Word, i've already tried reinstalling Word, even installed a 2003 version to check if it works with that. Well it doesn't. And as i've written before, I tried turning some .docx files to .pdf using a converter, but it still doesn't print them.
Anyway, i'll try the first two points and keep you updated, thanks! -
HP 3540 AIO Printer DOESN'T PRINT BLACK TEXT!
I unfortunately have an HP AIO Printer Deskjet 3540 Series.
Upon haggling wiht the abject customer tech support for an hour, he asks me to re-install the driver. After doing so, the black text JUST DOESN'T PRINT!
Is this some kind of joke! I am going to run out of colored ink in printng the **bleep** test pages.
It's an absolute rip-off. No wonder people buy cheap cartridges.Hi @GaurangDivecha
Although I would be happy to offer you some troubleshooting steps, I think it might be best to call HP.
You are welcome to take a look at the following document to ensure you have done all the necessary troubleshooting; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP ENVY 4500 and Deskjet In...
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
I hope this helps.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Printer:HP OFFICEJET 6500 E709n Series Doesn't print
My printer, HP OFFICEJET 6500 E709n Series doesn't print. It is directly connected by a cable to the computer. When I hit the print button, there is an error message:
Not enough memory available
Check cable as this may not be properly connected
I checked the cable, everything is okay. I rebooted several times. But it didn' work.
Anybody can help me?
thanks
This question was solved.
View Solution.What operating system?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
HP Officejet Pro 8000 Wireless - Doesn't print black
I set up a new Officejet 8000 back in about August of 2009. I never used it much and it looks like I have about 29 pages which have gone through it. Now I'm trying to use it and the black doesn't print at all. I have gone through multiple print tests, etc. and the self test even just comes up in magenta.
The ink level on the black is about 50% so it looks like there is plenty of ink. I have also taken the print head out and shaken it multiple times.
I read another post that indicated these printers had problems and it sounds like a warranty replacement but it just seems awfully early to have any problems with it. Any thoughts on how to resolve or should I just call HP?i have about 11 of these crappy printers on my site, i think i have sent more back to HP than i have actively working.
the current issue i have is also the black printing problem, its getting to the point where im considering recommending another supplier. HP's quality have gone though the floor with the recent crap they are producing..
cartridges are fine, even though the Hp rep i spoke to blamed the issue on the cartridge, it works fine in another machine, and a new cartridge also has the same fault. the print heads are also fine & replaced & tested in a working machine, same fault. all the cleaning pages & stages made no differance.
only solution - wave good bye and post it back to HP - yet again..
come on HP you used to care about your products and your customers, but lately you just churn our any piece of rubbish.
why have you let your standard slip soo far.. why dont you care about your customers anymore. -
I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg
Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
In UPGRADE from 4.7c to ecc6.0 ME21N Transaction PO doesn't print
Hello Guru's,
Will anyone give answer while upgrading(4.7C to ECC 6.0) in ME21N transction PO doesn't printing. will you provide which OSS will support to rectify the problem.
Full points for the answer.
Regards, PVHi,
Can you clear whether you are in the process of upgrading to ECC6 or you have already completed the Upgrade to ECC6 ?
Regards
Suhas -
I want to use my canon pixma ip4500 as my printer with my powerbook G4. I need a driver but was very confused with how to get one. Is it possible and could someone come down to my level and tell me step by step how to do it? Many thanks.
Nope, your PB is not too old.
Here is the link to the PIXMA ip4500 drivers on Canon's site:
Drivers & Software
The page has you first select your version of the Mac OS (10.4) from the pull-down "Chose Operating System" menu. Once selected, you'll see the available software, Click on the arrown next to "Drivers" and it should look like this:
(click image to enlarge if needed)
Click the word "Download " and you'll get the driver.
Note at the top of that image there are other links to other documents pertaining to this printer. If you click on "Brochures and Manuals," while you are on that web page, you'll have Canon's instructions, probably better done than by anyone here other than someone who has the same printer model on a Mac running OS 10.4. -
Acrobat 9 trial in WIN 7 loaded fine, but doesn't print.
09.25.10
I just loaded Acrobat 9 trial in WIN 7 and it loaded fine, but doesn't print.
When I go to print a PDF, after entering the file name, an Acrobat software setup box asks for the serial # or "continue to use product on a trial basis".
I select the continue option, click "next" the box disappears - then nothing happens. This repeats each time I try and print, even after a reboot.
Having selected Acrobat as the default printer did not change anything. Help! DaveYou may have to update Acrobat. I am not sure that AA9.0 works correctly with Win 7.
-
Acrobat 9 trial in WIN 7 doesn't print
I just loaded Acrobat 9 trial in WIN 7 and it loaded fine, but doesn't print.
When I go to print a PDF, after entering the file name, an Acrobat software setup box asks for the serial # or "continue to use product on a trial basis".
I select the continue option, click "next" the box disappears - then nothing happens. This repeats each time I try and print, even after a reboot.
Having selected Acrobat as the default printer did not change anything.
Help!
DaveYou may have to update Acrobat. I am not sure that AA9.0 works correctly with Win 7.
-
Adobe Reader 9.1.3 Doesn't Print on Mac 10.5.8
I have just installed an HP Officejet Pro 8500 A909g printer. It prints from every program I have tested, including Safari, Pages, and TextMate. However, it does not print from Adobe Reader 9.1.3
I am running the most current version of Leopard, have run Software Update and updated everything, and have run Check for Updates in Adobe Reader (it reports that there are no updates available)
I turned on debugging through cups ( http://localhost:631 ) and get the message:
E [09/Aug/2009:09:05:12 -0700] [Job 14] pstopdffilter/pstocupsraster failed with err number 13
D [09/Aug/2009:09:05:12 -0700] Discarding unused printer-state-changed event...
E [09/Aug/2009:09:05:12 -0700] PID 669 (/usr/libexec/cups/filter/pstopdffilter) stopped with status 1!
E [09/Aug/2009:09:05:15 -0700] [Job 14] can't open `/private/var/spool/cups/tmp/4a7ef3ba9b679'.
E [09/Aug/2009:09:05:17 -0700] [Job 14] Opening Printer Connection Failed: Unable to open the printer connection. Please check your printer connections and check for printer errors.
I am connected via wireless to the router, and then wireless from the router to the printer. Again, every other program prints without problem, so it is not a connection problem
I had seen a post about problems printing with Reader that suggested opening the Preview mode, and then printing from that, but when I click the Preview button, I get the message "Preview is not supported".
My workaround (other than not using Reader!) is to click Print, then open the expanded Print Dialog (click on the little down arrow), click on Advanced..., then select "Print as image". When I do that, it prints without problem.
James Nachbar
[url deleted by host]To clarify my previous post, I had already seen http://forums.adobe.com/message/1770581 . I mentioned in my post that I get the message "Preview not supported" when I click the Preview button from the print dialog in Adobe Reader, and thus concluded that the "Preview" workaround discussed in that thread wasn't helping me.
However, re-reading that post, they were talking about using the Mac "Preview" application to print the pdf file. Like every other application (other than Reader) I have tried, the Mac's Preview application prints just fine, and is another workaround.
The only program that doesn't print for me is Adobe Reader.
BTW, I also have an Intel chip in my MacBook Pro.
Re-installing Leopard, as suggested by one post in that thread, is not a reasonable option for this problem.
In fact, since Preview allows me to view and print .pdf's , my solution is probably just going to be not to use Adobe Reader. In fact, had I not been new to the Mac, I would have known that I didn't need Adobe Reader at all.
However, I'm glad this happened, in the sense that I use CS3 on the PC, and had considered moving to CS4 on the Mac. However, since Adobe apparently hasn't figured out how to get printing to work on a Mac from their flagship product (!), I will be sure to do a lot of testing of CS4 before considering buying the upgrade.
Maybe you are looking for
-
List of PO's created with reference to WBS element
Dear Experts, I am looking for all the PO's that are created with reference to a WBS element, Can you please suggest a T-code? Thanks & Regards, Manish
-
Strange Dump while using HR_INFOTYPE_OPERATION.
Hi frnz, I am facing dump while using the FM 'HR_INFOTYPE_OPERATION' as below. <b>If I swap positions of w_p0041-endda and w_p0041-begda it does not give a dump but error msg is generated saying that no selection in the period(as obviously dates are
-
Substr and instr for variables assginement in a csv file
Hi gurus Belows is my input csv file like with no fixedl enght vinput_file: WESTERN SAHARA,Moroccan Dirham,MAD,504,2, YEMEN,Yemeni Rial,YER,886,2, ZAMBIA,Zambian Kwacha,ZMW,967,2, ZIMBABWE,Zimbabwe Dollar,ZWL,932,2, and i want to assign 3 letter alph
-
Finder frozen after accidentally dropping 200 picture files on it
I was dragging 200+ picture files from a folder on my desktop to the trash when I missed the trash and they started filling my desktop with all their tiny icons...... it seems to be spending time trying to convert the icons to their thumb nail images
-
BI Services - Drill Method Missing
Hi When i publish a WebI Report block as a BI service, am not getting the 'Drill' method where as am able to see the 'GetReortBlock' method.But i remember when itried it before i was able to get both the methods. Not sure what am missing here now. An