Pixma MG 6230 does not shutdown. Gives wait shutdown message all night long.
Recently I have been unable to shutdown printer. Have pressed buttons but get message that it is shutting down and to wait. After 12 hours, printer still has same message. I cut power to unit and repower up and it restarts but tells me not to kill power unless I use proper shutdon procedures. I updated firmware to 2.010 but still have same problem. I have had the printer for 1.5 years or so and this started recently.
Could not reach the wall outlet but did remove some items plugged into the strip and tried it. It shutdown OK. Will see if it does so when I close down my computer tonight. If not then that was the problem. If it does act up then I will be back.Thanks
Similar Messages
-
10.1.0.4 SUN solaris 8 Database does not shutdown normally
After SAN crash the 10.1.04 database does not shutdown immediate (hanging or..)
I shutdown abort and startup is smooth.
I checked the leftover OS processes looks like none left...
Any sugestion?
TIAin the alert :12:27:06 2007
Waiting for Job queue slaves to complete
Wed Feb 14 12:28:15 2007
Job queue slave processes stopped
Wed Feb 14 12:33:18 2007
Active call for process 9247 user 'oracle' program 'oracle@solars23 (J000)'
SHUTDOWN: waiting for active calls to complete.
Wed Feb 14 12:47:00 2007
KTSMG_UPDATE_MQL(): MMNL absent for 1201 secs; Foregrounds taking over
oracle 9295 9274 0 12:25:03 ? 0:00 oracle102 (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq))) -
Snow Leopard sometimes does not shutdown
I've just bought MacBook with pre installed MacOS 10.6.1, then updated it to 10.6.2. Sometimes (approximately 1 of 5 times) it does not shutdown - there are only my wallpaper and active mouse pointer. I've been waiting for a long time, then just turned off it with holding power button. It seems I have a problem after high hard drive activity (a lot of copy, delete and move operation), but I am not sure. Could you help me, please?
To make sure we understand everything correctly, you are saying that when you start up from the Snow Leopard DVD & run its copy of Disk Utility from the Utilities menu, it shows only the DVD installer disc itself in the list on the left of Disk Utility's window? There is nothing else there?
Also, what are you booted from when you try to make an image of the installer DVD, the DVD itself or something else? Are you using Disk Utility or something else to make the image?
This seems very weird for sure. If you were running from some hard disk copy of the OS, I would suspect that its copy of Disk Utility or some OS support file was corrupted, but if you are doing this from the DVD that is extremely unlikely unless the DVD itself is physically damaged.
Apart from that, pretty much the only thing left is a damaged hard drive or other hardware failure in your Mac. -
My iMac does not shutdown but says I have programs open that need to force quit
My iMac does not shutdown but says I have programs open and that I must force quit and will lose changes.
But nothing is open all are shutdown and I dont know is this a problem with the Mac or the software ?Is Preview open? Copy/paste the following into Terminal in Utilities and hit return. Look through the output, which may give you a clue as to what is open.
lsof -l +L -R -V | grep / -
My Canon Pixma MP 540 does not scan any longer after update mountain lion. MP Navigator EX 2.0 starts and immediatley stops and comes with this message:
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSImageCell loadingState]: unrecognized selector sent to instance 0x825c0f0'
Printer works normally. Who can help.
Thank you
PeterPan52Hi
Did you find a solution to this ? I amhaving same problem
Thanks -
Installed FF 16, 17, 18. Will not open in normal administrator login, nor with "Run as administrator" but will in W7 safe mode. Changed permissions (had to do it in W7 Safe Mode, normal login would not allow (logged in as an administrator) could not delete the Mozilla files in normal login. On rare occasions, with a new install, I could get it to open once, then not again. Searched the reg for any mention of Mozilla or FF and cleaned it. Tried FF safe mode, no luck. Checked permissions after taking ownership and propagating full ownership rights to all FF files, many reboots, no luck. Chrome, IE and SeaMonkey work fine. Using a fairly new install of W7 Professional 64 bit, on a Dell Optiplex 990 i7, 16GB ram. Had the same problem with another user on an identical box. No problem on other computers No other program problems.
I should have been a bit more definitive.
I have uninstalled FF, with the windows uninstaller, by manually cleaning the files and the registry of any mention of FF or Mozilla, and by running Revo uninstaller - always rebooting and checking to see if the files are indeed gone. (I have set windows file preferences to see all files, including system files.) I have run 4 AV/malware scanners and found nothing but a few tracking cookies. I download, from Mozilla.org, (http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/18.0/win32/en-US/Firefox%20Setup%2018.0.exe) a fresh copy of the Firefox Setup 18.0.exe each time and install when logged in as an administrator and choose "Run as Administrator". I get the same result each time I try to open Firefox. Consistently does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." This happens even when I run the .exe file from the x86 program directory. I have also attempted to run in XPsp3 compatibility mode to no avail,
I make the following assumptions:
The system is not infected
I am doing clean installs
There is no existing trace of FF on the system
I get identical results on one other W7 64 bit Optiplex 990 system with an i7 processor and 16 GB or ram.
I CAN run in windows safe mode with networking.
I have no other software or hardware issues. -
Computer restarts (does not shutdown) when iPod is connected
This issue has probably been covered in these forums,
but I didn't read anything about this.
My Computer (G4 on Tiger) restarts (does not shutdown) when my iPod Classic 30GB is connected
via USB. Is that normal? Everytime I shutdown my computer and I forget to disconnect my iPod
it restarts. The problem is that my G4 is connected to my sound system and I hear the loud opening BONG sound when the OS boots up. Very annoying, and dangerous for my speaker system...
I know there are third party utilities that enables users to kill that start up sound but if I repair permissions, clean PRAM, etc those settings are removed and the original Apple factory settings come back. Is there any way to kill that sounds PERMANENTLY! with Mac OS Tiger.
ThanksHmm... You might want to consider posting this in the OS X forum as well. I know with my MacBook (running Leopard), if I mute the system volume prior to shutting down the computer, the next time I boot up, I don't hear the startup chime.
It's not normal for your computer to restart itself coinciding with iPod actions. Do you have any other software applications installed that interact with the iPod that might be causing this?
CG -
My HP 650 laptop does not shutdown by the normal method, running Windows 8
My HP 650 laptop does not shutdown by the normal method, I am running Windows 8
@CraigD21
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
My IMac does not shutdown through the normal operating procedures. I have to press the reset/shutdown button in the back. Plus it constantly freezes up. I have over 100GB of free space. Total capacity is approx 500GB
Open up Disk Utility, and select Macintosh HD on the left, then click on "Verify Disk" in the bottom right. See if it checks out or not.
-
I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?
Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.
-
I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?
You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
LN -
Tax code A0 country IN does not exist in procedure ZTAXIN-Message no. FF713
While posting customer invoice using output tax code A* for country IN, I get the following error message:
Tax code A0 country IN does not exist in procedure ZTAXIN
Message no. FF713
The tax procedure ZTAXIN is assigned to comp code, taxes are configured and everything seems to be fine. The procedure has been manually created (for service tax purposes) and I am wondering whether the procedure might be wrong. Or there are any other settings missing in customizing?
The input tax is working fine, the problem is related only when I use outout tax.
Does anybody have an idea what else could be checked?
Thanks,
MagdaHi
Go to IMG---->Financial Accounting--->Financial Accounting Global Settings>Tax on sales/purchases>posting--
>Assign tax codes for Non-Taxable transactions
TCode : OBCL
check for the A0 and V0 tax codes whether they are assigned or not.
this will solve your problem
Regards
Venkat -
I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit
There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.
-
When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all. the only way I can get rid of it is to shut down and reboot. Can anyone help?
Start here.
-
What has happened to the iPad 2 finger select and drag technique?
Since upgrading to iOS7 it does not work?
I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the imagesWhat would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback
Maybe you are looking for
-
CS2: Adobe Bridge Cache File on Desktop...Why?
For some unknown reason...CS2 has started placing "Adobe Bridge Cache" file shortcuts on my desktop. When I click on one, I receive a Win XP error message that says the file .bc is unkown and can't be opened. These shortcuts have never appeared befor
-
Error in using TCPIP/Instr class to open a VISA session
I use the TCPIP/Instr class session to open a VISA session to Agilent 86140B Optical spectrum Analyser and I get an Error - VISA open in Appln.vi.Help me to fix this problem. I am able to access the instrument on LAN through a Telnet session. Vijayal
-
How to avoid server busy dialog in iac
Hi, I am a beginner in IAC. I am executing a plug-in throung an mfc based IAC dialog box. But when my plug-in takes little longer time to execute a pdf, then I am getting a server busy dialog, asking swith to/retry option. Can you please let me know
-
How to refer to another EJB from different root
Hi , Is there any way in JDeveloper to refer to EJB's from another context root ( Technically different application ) from the EJB's in the current context root. ? Am seeing a couple of ways, but looking for something better if possible 1) Reuse the
-
I want to change iTunes ID and keeping .mac account.
I share my iTunes account with my son. We want to have separate accounts. I want to keep the iTunes ID associated with my .mac account for my use. My son wants to use a gmail account for the itunes and all the music he has acquired through the curren