PIXMA MG2922I can't connect wirelessly, don't know how to pair to router, 3 device network.

Windows tablet, Windows 7 and Windows 8. 64 bit
printer said offline.

Hi Troublex2,
To try and get the printer connected wirelessly, we will first want to ensure that the wireless LAN setting of the printer is enabled. To do this, please follow these steps:
1. Make sure that the machine is turned on
2. Press and hold the Stop button until the Alarm lamp flashes 18 times.
3. Release the Stop button.
4. Press the Color Start button.
Once the wireless LAN setting has been enabled, please download the latest drivers for the printer from the Canon USA website to install the printer wirelessly. Prior to installing the printer, please ensure that any antivirus or firewall software that are on your computer are temporarily disabled, since these programs can sometimes prevent the printer from being detected during installation. Once the printer is installed successfully, the protection software can be re-enabled.
Please click here to go to the Drivers and Software page for the PIXMA MG2922. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click on the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file is downloaded, please double-click on it to install the printer wirelessly. This will install all drivers and software for the printer on your computer.
If you still experience difficulty printing wirelessly, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

You cannot. If someone else told you there is a way then they will need to show you. After Effects requires a 64-bit system and the latest release requires Mac OS X v10.8 or v10.9 minimum

I want to share my internet from iphon to my laptop but i can't bcz i don't know how to do it ,if some one know about it so kindly tell me

i want to share my internet from iphon to my laptop but i can't bcz i don't know how to do it ,if some one know about it so kindly tell me

The following have instructions and more information. Note that personal hotspot is something that your cellular plan may or may not support and that you may need to contact your carrier.
http://support.apple.com/kb/HT4517
http://support.apple.com/kb/TI160
http://support.apple.com/kb/HT3574

Whenever I go onto my YouTube app and watch videos I can't hear it anymore, I make sure my volume is the highest it can be but I don't know how to fix it

I can't hear videos on YouTube. Help. I phone 4s YouTube app

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

Lion install listed in Finder Left pane Can't find it Don't know how to get rid of it

The Lion install app seems stuck in the left pane of my Finder app. I have searched for the location of this app and cannot find it. I also cannot get rid of it ... stuck there on my left hand screen. Clicking on it does nothing. Why is it there? How do I get rid of it? Thanks!

Hold down cmd and drag the item off the pane. Had forgotten this.
I still wonder why it was there and where the app is at this point?

I don't know how to set AE to extend my network.

Today i bought a new Airport express, and decide to use it as a extend tool for my network.
but i found i cannot set it up!
i set it as a extended, then, it disappeared from the list!
Then what i can only do is to reset it, and do everything again, but it disappeared again
Because i'm living in my friend's house, so that i cannot remove the old router.
How to deal with it?
P.S: If i only set it as a router,it's okay. but i cannot do that.
Is anyone can tell me how to set it?
Message was edited by: Acedia

Acedia, Welcome to the discussion area!
If you configure the AirPort Express (AX) to extend the network, the only network name you will see in the list of networks is the name of the network which the AX is extending.

Self assigned ip and can't connect wirelessly on any apple device

Man oh man... this issue has been festering for almost an entire year now and I have not found a solution. Last August (2009) my macbook stopped wirelessly connecting to my ATT 2WIRE dsl modem saying it had a self assigned ip address. I bought the computer in July and could connect with no issues for about a month. Ever since then, I've been connected via ethernet with slow connection. At the same time, the 2 iPhones in our household also could not connect wirelessly. One G5 could connect wirelessly but was extremely weak and often dropped the signal.
I did tons of research and found zillions of other people with this issue and no resolution. I've tried every solution on macrumors, and apple discussions with no results... I've disabled firewall, renewed DHCP, tried DHCP manual (which then changes the status to say I'm connected, but nothing works in my browser), restarted, etc. At work, I can connect to our Linksys router wirelessly with no issues. When my friends come over, their macbooks and iPhones don't work either!
Originally I thought the issue was my modem so I ordered another one. Same issue. Just this week I was at my wits end and cancelled my service with ATT and switched to Clear. I acquired a Linksys router to connect to the Clear Modem and I'm STILL having this issue. The difference is now that my iPhone can connect wirelessly but my macbook still cannot. The router is a Linksys WRT51ab. My macbook pro is on version 10.5.8. I can only assume that some kind of update to airport is causing the problem. As of now, my IPv4 address is: 169.254.111.225
Please someone help me! I promise some kind of reward if you can help me fix this.

Based on the model number, your Linksys router is OLD.
I'd actually suspect that your router has been the problem.
You can download the full user manual here --> http://homedownloads.cisco.com/downloads/wrt51ab_ug.pdf
I don't know if you ever secured your wireless router or renamed it from the factory defaults.
If it your Linksys wireless router is not password secured, it's possible that someone else changed settings about the time things stopped connecting.
Regardless, you can completely reset the Linksys to the factory defaults by holding down the Reset button on the Linksys for more than 10 seconds.
Do that first.
Then see if things 'magically' start connecting again. I'm guessing the phones will connect, but the Mac still won't, because of the IP address in the current configuration.
If not, here's how to configure your Mac network settings.
On your Mac, in System Preferences, Internet and Network, Network,
Click on Location, Edit Location
Click the + sign to create a new location called '_test'
(The underscore before the name will put it at the top of your Locations list where it's easy to find)
Select Ethernet (wired)
First, we'll let DHCP try to set the address.
Click Apply.
Move the selection back to Ethernet, and watch the Status.
If it shows Connected and IP address appears after a few moments, at least the WIRED configuration is working.
Now IF the Wired configuration works, lets move on to the wireless configuration...
(If the Wired configuration is still not working, post back and we'll work through it.)
Still in System Preferences, Internet and Network, Network, with the _test location you just created...
Select the AirPort interface in the left column.
Turn AirPort On.
If no Network Name appears, click on the up/down button and select Join Other Network and select your Linksys router name.
Click 'Apply'.
Leave DHCP settings alone and watch the Status to see if it connects.
Let me know what happens!

Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.

Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.

Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next.   Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand.

My X61 can't connect wireless when i use battery!!!

TYPE NO.: 7673-AN6
i confused why it can not connect wireless when i use battery?!
the problem drive me crazy nearly, it means i must take adapter every time
i help every one can help me!
cheers,

Most of the functionality and problems are in the drivers. The hardware tends to be discrete testable functions though these days there is a fair bit of functionality in the hardware. The hardware tends to be implementing better defined protocols where as the to and fro of the higher level protocols tend to be what varies from Access Point to Access Point. The 4965AGN is a fairly recent chip set and the drivers are far from smoothly running.
The problems can vary from AP to AP so may work at home but not at work etc. Some have reported here that the 4965AGN setup doesn't work with the Cisco 1200 Access Point and I have yet to be able to get it to work under Vista with the equipment at any New York Starbucks. T-mobile do use Cisco equipment but I don't know which models.
Anything you can do to simplify the situation helps. Maximum power. No security. Disable IPv6 on the connection etc. Just to give a rough idea of the kind of thing that might be wrong here are some of the things listed as known issues or fixed according to the readme of the driver (Originating from Intel) that was released for the 4965AGN on 4/11/08.
There are several authentication issues with EAP, PEAP and LEAP which will cause it not to authenticate. There are also Vista EAP issues and some things which may resolve with SP1 which was pushed out on update last week. So there are many comnbinations of situations which may not work and it is important to test with different access points. Authentication and security has more issues. Also at the higher speeds such as 54Mb some of the security mechanisms will not be able to keep up. AES is the only mechanism which Intel expects to work at 54Mb.
http://downloadmirror.intel.com/15806/ENG/relnotes.htm
There have also been past issues where the cards are silenced for twenty minutes after a failure to authenticate and in many cases the card will not be in a valid state after hibernation. It is noticable that when you phone T-mobile the first thing the tech has you do is completely shut the machine down - not hibernate - and begin afresh.
Once you have uninstalled and re-installed the drivers and connection manager a few times it is also possible to be having problems with junk left in the registry.
I don't recommend adding the 4965 drivers directly from the Intel site. I would wait for the one that has come through the Lenovo testing cycle.
In reality for those who don't want to make maintaining their laptop a serious hobby (Hopefully all of us - Far too much time is wasted on wireless) it is really a matter of rebooting your machine at a given access point. Trying your luck and then shutting it down and going somewhere else if it doesn't work. Use wires when you can. At home if your access point doesn't work check your configuratiions, temporarily remove all security, restore factory settings on the AP, reinstall from scratch and if it still doesn't work replace it with a different brand of Access Point.
Of course it is intended to just work and for 95+% of situations Wi-Fi does. The 4965AGN is newer so it has its fair share of early life issues to get resolved. Vista also still has issues. If the problem you are seeing is only when you are on batteries you are lucky and LANOgre's instructions may well solve it.
Message Edited by hiker on 05-19-2008 09:23 PM

Can't connect wirelessly to the Internet

Hi all,
hope someone can help me with this.
I'm running OSX 10.3.9, have an ADSL Nation X-Modem and AirPort Express.
My wireless network is up and running, I have strong signal and AirTunes can connect and play fine wirelessly.
However, when I try to open Safari and connect to the Internet, it doesn't connect ("Can't find Server.")
When I plug the X-Modem direct into the Mac with the Ethernet cable, I can connect to the internet fine, so the modem and cable don't seem to be the problem. I've tried running throgh the AirPort Express SetUp Assistant and restarted AirPort and rebooted everything many times. In Network Preferences, it says it's happily connected, has IP address etc, but I still can't connect wirelessly to the Internet?
Any help greatly appreciated!
thanks
Nat

OK, here it is again
First you plug the Ethernet cable from your Internet modem into the AE. Then plug it in. The light will go amber. Run the Airport Setup Assistant. Create a new wireless network. Call it what you want. Enter the information about your modem, in the fields just like you do for your Ethernet connection on your PC or Mac. This means DHCP or static IP and subnet..... most if you use DHCP will be filled in for you. Now that you have saved the info and the AE has restarted, look for the network that you named in the available networks. If you have set it up to dish out IP addresses, it will give you one. If you have started out with WEP or WPA the connection process is much more difficult at first.
I leave it wide open until I can connect to it and then I create MAC access lists. I'll leave all the security stuff to you after you get it working basically.
Run Airport Admin Utility. It will scan the area for AEs and AEBSs and you can select yours from the list. Click on configure. Here is where you set all the details up on how you want it to work. Here you can configure the details, place your securities etc. Notice that you are accessing it wireless and then you can go through the various Tabs to configure how you want it to operate.
There is an Internet tab. This will show you how it is configured. It should look the same as your NIC parameters did when you hooked straight to the modem. There are also many more tabs that allow you to configure each area, like do you want it to be the gateway of your network, dish out IP addresses etc. My advice is to let it do that if more than one machine will connect and you don't require defined addresses to get to say a server.
The two important areas are the Internet and the LAN area. These tell it how to interact with your modem, and the machines trying to connect to it. If the AE doesn't see the modem or can't interact with it, one of the parameters is wrong. Same goes for the LAN side of things.
Michael

I am trying to update an app, but its asking to connect to a wifi or downlown it in itunes. I can't do either or, or maybe I just don't know how to do it. Help

I am trying to update an app, but its asking to connect to a wifi or downlown it in itunes. There are several apps that need updating, I can't do either or, or maybe I just don't know how to do it.It's saying that the app is over 50MB. But it's not telling me which app. Help!!!!!!!!!

Well, I just purchased Linksys wifi and hooked it up. It's running fine. When I go to my IPhone settings to see is I'm connected to a wifi, it shows that I am not connected. When I hit my wifi to see or to connect, it takes me to the wifi networks and it's showing my secured wifi as being locked and my guess wifi as not locked. How do I sign in to my own wifi network.

From my iPad I can print wirelessly in my office, but how do I print remotely via the web through my HP ePrint printer. It is set up with an email address but i don't know how to access it from my iPad.

I can print wirelessly in my office from my iPad, but how do I print remotely via the web to my HP ePrint printer. The printer is set up with an email access address but I don't know how to access it from my iPad.

Read through this for some information on how to do this:
http://www8.hp.com/us/en/support-topics/mobile-printing/how-to-print-mobile-devi ces-ipad-iphone.html

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELP

I would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.

HT5539 Can u connect wirelessly to Mac mini

Can u connect wirelessly to Mac mini

Yes, your Mac Mini has built-in 802.11n support and Bluetooth support. What do you want to hook up wirelessly?

I have an 8g Ipod Touch and I accidentally recorded some video on it. Now I don't know how to delete it. When I connect to Itunes, there is no 'Video' Folder, so I can't even see/find the videos to delete them!

I have an 8g Ipod Touch and I accidentally recorded some video on it. Now I don't know how to delete it. When I connect to Itunes, there is no 'Video' Folder, so I can't even see/find the videos to delete them! I am not very experienced with Itunes, please help me.

On the iPod go to the Photo app and then to the Camera Roll. Tap on the the video yu want to delete and then tap on the trash can icon in the lower right.

PIXMA MG2922I can't connect wirelessly, don't know how to pair to router, 3 device network.

Similar Messages

Maybe you are looking for