Pixma MG6200 scanner doesn't work over wifi

Hi I'm on a Mac Book Pro OS X 10.8.5.
I'm WIFIed to my MG6200 printer scanner and can print, but can't scan. When I try, I get..
Printer is in use or an error has occurred. Check status.
Scanner reported an error
I've tried trashing and rechoosing the printer/scanner and that doesn't help.
What can you suggest?
Thanks,
Ty Ford
Solved!
Go to Solution.

Hi TyFord,
We can reset the printer system on your computer, then reinstall the printer using the latest drivers from the Canon USA website to see if this will resolve the issue.  To reset the printer system, please follow these steps:
1. Go to your Apple icon on the upper left corner of your screen.
2. Click System Preferences.
3. Click Print & Fax
4. Right click your printer on the left and select "Reset printer system". Note: If right click does not work, press and hold the
control key on your keyboard and then click the mouse button.
5. If your printer is still listed on the left select your printer and then click the minus (-) button to delete it.
6. Restart your Mac.
Next, please click here to go to the Drivers and Software page for the PIXMA MG6220. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the MINI MASTER SETUP file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded the Mini Master Setup file, please follow the steps above to also download the ICA drivers from the DRIVERS section, and the MP Navigator program from the Recommended Downloads section. 
Once all items are downloaded, please double-click on each of the items to install them on your Mac, then attempt to scan.  Should you still experience difficulty, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Facetime, imessage and find my ipad doesn`t work over wifi but they work over 4g

    Facetime, imessage and find my ipad doesn`t work over wifi but they work over 4g, please help me

    Are you sure?
    According to Apple Facetime will only work over WiFi. IOS 6 will bring feature that you can make Facetime call over 3g-4g

  • Verizon messages app doesn't work over wifi....

    Hello, all,
    Until recently, I used the verizon messages app to send/receive texts over wifi on my gs3 when I had no cellular/data reception.  Now it will only send/rec when there's cell reception.
    But...the app does still work over wifi onmy galaxy tab 2 7.0.
    Why could this be?  Did a recent app update break txt over wifi for the gs3?
    Thanks!
    Abe

    This does NOT work on the Galaxy S3.
    Airplane mode ON, Wifi ON, No network mode is available in Airplane mode.  So...only wifi is available.  When I try to send a text with only wifi available I get "Network not available.  The message will be sent when the network is available"
    BUT...On my Galaxy Tab 2 (non-verizon), This DOES work.  On the tab 2 with only wifi available, I CAN send text messages using Verizon Messages.
    So....again...
    On Galaxy Tab 2 with only WiFi available...texting with Verizon messages DOES work.
    On Galaxy S3 with only WiFi available...texting with Verizon messages DOES NOT work.
    Please fix Verizon Messages to work over WiFi using Galaxy S3.
    Thanks,
    Abe

  • PIXMA MG5420: scanner doesn't work, get error message that driver will be closed 3 202 19

    For some reason, the scanner will not work.   Initially when I click on Autoscan on the PC menu  the message reads that the scanner is warming up.  Then I get an Error Message:  Internal Error Occurred Scanner Driver Will be Closed.  I don' t know what I'm doing wrong all of  a sudden.  There is only one computer in the network, mine, and I'm trying to scan from the 5420 via a USB cable into my HP laptop (Windows 8.1 64 bit).
    Copying and printing work fine.  Where do I even start?

    Hi ellenrozsa,
    The IJ Network Scanner Selector EX application will need to be running in order for you to scan wirelessly.  If the IJ Network Scanner Selector EX is running, its icon appears in the notification area of the taskbar as shown below:
    If the icon is not displayed in the notification area of the taskbar, please click IJ Network Scanner Selector EX on the Start screen.  If IJ Network Scanner Selector EX is not displayed on the Start screen, select the Search charm, then search for "IJ Network Scanner Selector EX".
    In the notification area of the taskbar, right-click the IJ Network Scanner Selector EX icon and select Settings....
    Select your scanner or printer from Scanners, then click the OK button.
    Hope this helps!
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Scanner doesn't work with wifi

    Hi, 
    I just install all the driver and soft for my HP photosmart B210 on my Mac running on the OS X 10.8. 
    The printer works fine with my wifi but not the Scanner on eather way from the printer or from the Mac using the same wifi.
    I found the same trouble with my laptop running on W7 but the HP scan doctor solved my prob on windows.
    is there is the Scan doctor equivalent for MAC? what can i do to make my scanner works?
    Regards

    I found my answer by myself ... 
    http://support.hp.com/us-en/document/c01664444
    According to HP :
    Print drivers for the following printer types are supported in Mountain Lion by the HP software available from Apple Software Update. These drivers provide print-only functionality.
    HP Inkjet single-function printers (Deskjet, Officejet, and Photosmart)
    HP LaserJet color single-function, All-in-One, and MFP printers
    HP LaserJet monochrome single-function, All-in-One, and MFP printers
    HP Designjet printer
    Voila !

  • Lexmark x4650 doesn't work over wifi

    I recently bought a Lexmark x4650 wireless printer. I followed the install instructions that it came with it then updated the software, but my Mac just doesn't recognize it wirelessly, but it prints fine when connected via USB. My Linux laptop can print over the wifi no problem, so it's not the printer.

    I would expect that with the Linux laptop you would have needed to create a TCP/IP network queue rather than relying on some form of network discovery. I suggest that you could use the same technique on the Mac.
    When adding the printer, select the IP icon and then select LPD or HP Jetdirect for the protocol. You can then enter IP address of the printer and the respective driver in the Print Using menu.
    If this new queue fails to print, open Network Utility and use the Ping function to check that the Mac can get a response from the Lexmark.

  • IPhone has internet over WiFi, however email doesn't work over wifi

    Hi. I have wifi set up for work and home and I can get internet just fine, however when phone service is bad I can't send emails even if the wifi is full bars. At home my service is 0-2 bars and work I have nothing. Any suggestions?

    Check your Outgoing Mail Server settings. If only have your cell phone carrier's mail server (i.e. AT&T SMTP Server) selected it may only work when using cellular data. Try selecting another outgoing mail server if you have another list.

  • Image Capture doesn't work over WiFi

    I've got an HP Printer connected via USB to an AirPort Express. I can print to it without any problems. However, if I open the Image Capture app native to OS X it doesn't show the printer, so I can't scan documents. Is there any way to get Image Capture (or any other app which from which I can scan) to recognize the printer when it's connected via the AirPort Express?
    Thanks

    Is there any way to get Image Capture (or any other app which from which I can scan) to recognize the printer when it's connected via the AirPort Express?
    Sorry, but no. Printers connected to the AirPort's USB port are supported only for printing. Advanced printer functions like copying, faxing, or scanning (as in this case) are not supported.

  • My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

    My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

    Follow the steps here. If nothing works, make an appointment at an Apple store or with whoever handles iPhone warranty where you live:
    http://support.apple.com/kb/TS1398

  • Wireless scanning of Canon Pixma MX 725 doesn't work in 10.9.1

    Hello,
    the built-in wireless scanning feature of Canon Pixma MX 725 doesn't work in 10.9.1.
    With USB-Connection everything is fine.
    Latest Apple Drivers are installed (Canon IJScanner5 version 2.3.1). I've also tried the new verison IJScanner5 3.1.
    With the Canon Software "Canon IJ Scan Utility" wireless scanning is possible.
    In OS X 10.7 the built-in wireless scanning is possible.
    Any Ideas?

    I haven't been able to re-create your fault on my test Mac's, but then both are clean installs of 10.9.1.
    Do you get this communication error as soon as you select the MX in the Shared section of Image Capture? Or do you get the Image Capture pane appearing and an overview of the document will start, but then during the scan you get a communication error?
    One thing I have noticed in testing this symptom is that neither of my 10.9.1 Mac's have the CIJ Scanner Register process running. I know this process was present at some point after Mavericks was released because I can remember users complaining about it, especially when they did not have a Canon All-In-On. When you mentioned about trashing the process I checked my Mac's and could not find the process. So on the clean install in Parallels, can you check if this process is running.

  • I upgrade to mountain lion and my cannon MX310 scanner doesn´t work. What can I do?

    I upgrade to mountain lion and my cannon MX310 scanner doesn´t work. What can I do?

    Download and install the MX310 scanner driver and MP Navigator from Canon.
    http://support-au.canon.com.au/P/search?model=PIXMA+MX310&menu=download&filter=0 &tagname=g_os&g_os=Mac%20OS%20X%20v10%2E8

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Mac Powerbook with HP 5510 printer.  Scanner doesn't work since I installed Lion

    Mac Powerbook with Lion.  Scanner doesn't work since I installed Lion

    What kind of computer is it? Powerbooks can't run Lion. MacBook perhaps?
    With Lion, all scanning is performed through Preview. Use Preview.

  • I recently installed WIndows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

    I recently installed Windows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

    update your scanner's driver.  ie, see if hp has a win 8 driver for that model.

  • Scanner doesn't work w/All in one Series

    scanner doesn't work with Deskjet F4100 series.  My printer disappeared when I tried to print a PDF file.  I had to uninstall/reinstall, but now I don't have access to HP Solutions Digital Imaging Monitor It always says "no devices found" and closes.  I have Window Vista 32. I tried to find the ".exe" file, but errors say file cannot be found. The printer works, but the scanner. It shows that I have  Xerox Work Center scanner but the profile shows no filename or resolution.  The properties say the scanner is working properly, but HP solutions can't detect a device.  Help
    This question was solved.
    View Solution.

    Hi,
    I received an update from HP on Sat urday and when I completed the update (took about 3 hours) along w/reinserting the disk that came w/the F4100 all in one, I could finally connect to Solutions Center, and now I can scan. YEA!!! When I turned on my computer the update automatically came up and the restore point from a previous installation attempt.  Thanks so much this means the world to me.  I will also send this message from another person who was helping me.
    Moneybags

Maybe you are looking for